ACH Payment Process in F110 Program

Hi SAP folks,
I am having a small issue with ACH payment process through F110 Program.
I am using Payment program RFFOUS_T for a payment method " A" for ACH and all variant and other configuration is perfect.
When I execute F110 program, it create DME file for me and let's say I clear one vendor with one invoice only then in DME file I can see record 1, 5, 6, 7, 8, and 9 and file is 100% good to transfer to bank.
Now If I have two Invoice for same vendor and I execute the same process, record 7 with is Addendum record disappears and I will have only 1, 5, 6, 8 and 9.
Our requirement is that let's say we need to pay multiple almost 100 invoices per vendor and we would like to have records 1, 5, 6 and 100 7 records which contains all vendor invoice information and 8 & 9.
I am using CCD format but i guess with program RFFOUS_T it doesn't matter too much.
Has anybody face this issue before ? I have spent hell of the time on this issue but haven't resolved this. I would greatly appreciate your response on this.
Thanks
Perry
Message was edited by: Perry Oza

Hi Perry
I think this problem is because of all the payment is grouped as one payment.  You need to make a separate payment for each vendor line items so that you get record 7 as many times as the number of vendor open items.
In FBZP, payment method in company code, there is an option where you can select SINGLE PAYMENT FOR MARKED ITEMS and also you need to give the payment method in each of the line items.
Hopethis helps.  We had the same requirement and we getting the expected result
Thanks
Ashok
Assign pointsfor useful answer

Similar Messages

  • Down payment processed by F110 is blocked

    We would like to make a down payment on a purchase order. I entered the payment request with transaction F-47 and the special G/L sign. Then i run the automatic payment program F110 and the item gets paid. The payment program generates a posting with a debit on the vendor and a credit on the sub-bank account. However, the vendor item gets automatically blocked for payment. Therefore, when the invoice is posted, the advance payment will not be automatically deducted.
    does someone know why this advance payment gets a payment block and how we can avoid having this payment block?
    Thanks and regards,
    marlies

    Hi,
    Clear the down-payment made against invoice through T-Code : F-54 before final invoice payment. When you clear the DP against invoice It will transfer the advance (DP) from special GL to normal GL and clear the payment block.
    Down-payment flow :
    F-47 : For downpayment request.Noted item. No FI entry
    F-48 : For down payment to vendor. As per down-payment request we have to pay DP and without request also we can pay the advance.
    F110 : APP
    FB60 : Invoice
    F-54 : Transfer of Advance from special G/L to Normal by clearing special G/L Items
    F110 : Final payment
    Regards
    Sanjay J

  • Payment process through  F110

    Hai,
    I am consuming lot of time while processing  payment through F-110.
    As and when advance is processed, i need to edit the payment proposal  as there would be huge bills payable other than advance, i need to edit each line item and then process.  Is there any other process through which only advance payments can be process.  As is there any configuration changes that can be effected, which allows only the advance proposal  to come for this f110 transaction.
    Could you please advice me accordingly.

    Hi,
    Just a try.
    In Free selection, select Reconciliation account and give the alternative reconciliation account that is used for SPL GL trasactions (Advances).
    Regards,
    Saravan Kanuparthy

  • Bank reference  in payment advice after F110 program

    Dear Expert,
    We have created z program to get the payment details in bank format after running F110 in RTGS/NEFT format. Excel file will be sent to bank. Bank will update in their system.
    Bank will confirm the payment made through online to client with bank reference.
    I want to update bank reference in payment advice which will send by email to vendor.
    How to update bank reference after confirmation received by bank in payment advice ? and email after bank confirmation ( not after running F110)
    is there any work around to do so ?
    points will be rewarded.
    Thanks
    Sampat

    Hello Venkat,
    There are 2 methods ,where Banker directly send payment advice along with Bank ref after making the payment or you can do the bank reco everday end & update bank ref in any of the field in reconcialation document and map accordingly in payment advice
    Regards
    Mani

  • ACH payment with RFFOUS_T Program

    Hi SAP folks,
    I am having a small issue with ACH payment process through F110 Program.
    I am using Payment program RFFOUS_T for a payment method " A" for ACH and all variant and other configuration is perfect.
    When I execute F110 program, it create DME file for me and let's say I clear one vendor with one invoice only then in DME file I can see record 1, 5, 6, 7, 8, and 9 and file is 100% good to transfer to bank.
    Now If I have two Invoice for same vendor and I execute the same process, record 7 with is Addendum record disappears and I will have only 1, 5, 6, 8 and 9.
    Our requirement is that let's say we need to pay multiple almost 100 invoices per vendor and we would like to have records 1, 5, 6 and 100 7 records which contains all vendor invoice information and 8 & 9.
    I am using CCD format but i guess with program RFFOUS_T it doesn't matter too much.
    Has anybody face this issue before ? I have spent hell of the time on this issue but haven't resolved this. I would greatly appreciate your response on this.
    Thanks
    Perry

    Hello Rana,
    Thanks for your help. I have already tried that option in vendor master and it works fine but issue is here.
    Let's say If I have two vendor invoices for same vendor and each for $100 so as per your method SAP creates two line of record 6 and 7 in ACH out put file like below.
    Record 6.. for vendor name and payment $100.00
    Record 7.. for  Vendor Invoice reference 1234 for payment
    Record 6.. For Vendor name and payment $100.00
    Record 7..For Vendor Invoice reference 2345 for Payment
    So this way it cost more money to client because each payment is considered as a separate transmission.
    <b><u>We are looking for following solution.</u></b>
    Record 6.. with Vendor name and total amount of $200.00
    Record 7 ..For first invoice with invoice number for $100.
    Record 7..For second Invoice with Invoice number for$100.
    I hope I was able to explain my challenge and if you can provide any help, I would really appreciate that.
    I am sure somebody must have faced this problem before and I am curious to know how they resolved.
    Thanks
    Perry

  • Ach payment configuration doc

    hi experts,
    can anybody will provide the ach payment process configuration doc, i have to configure in my project. kindly help me in this regareds
    gopal

    Please use T-Code FBZP for configuration of APP.
    Br,Vivek

  • ACH Payment, F110

    Guys,
    I ran another F110 for ACH payment.The  propsal gives the following messages,Anyone please guide me how to create payment media and variant for format ACH.
    Regards
    Shaun
    Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000000369, user ID SHAUN)
    No variants found for format ACH
    No Payment Media Created in Format 100
    Step 003 started (program RFFOAVIS_FPAYM, variant &0000000000001, user ID SHAUN)
    In form Z_REMIT_DA / window MAIN, the element 610-D (Text-D) is missing
    Output of the relevant forms is defective
    >

    Ok, give this a shot ..
    Create the DMEE in PWM ...  once you do that in FBZP Payment Meth By Country"
    select - Use Payment Med
                 - Select the new DMEE format from the drop down
    As far as the actual creation of the DMEE I had my ABAP'er make that
    Edited by: Jay J. Esparza on Sep 11, 2008 10:00 PM

  • Payment block set for Down payment requests processed via F110

    When I process a vendor down payment request from F-47, it gets paid during F110. However it gets posted to Vendor a/c with special GL indicator and with a "payment block". I am not sure why the payment block is put automatically. Can this be functionality be changed.

    Hello Krishna,
    Can u pls elaborate the question.
    Step1: Post down payment request F-47
    Step2: Post down payment against request F110
    When your getting this payment block.
    however pls go through this path
    IMG/FA/ARAP/Business transactions/Outgoing payments/Outgoing Payments Global Settings/Payment Block Reasons/Define Payment Block Reasons or Define Default Values for Payment Block
    Regards
    Murali

  • Line Item Sorting in Payment Proposal in F110 (Automatic Payment Program)

    Hi all SAP Gurus...
    I really need a help here...
    In FBZP, I set up 'note to payee lines on the form' restricted to 17 rows. And the sorting for line items, I use 'document date'.
    For example, I have 68 open items. When I run F110, in the payment proposal, all the open items are grouped based on 17 items in each group, so I get 4 groups, but they were not sorted by the document date. All the open items seem like distributed to 4 groups randomly.
    Could you please advise on how I can sort the line items in each group by the document date?
    Thanks a lot!
    Regards,
    Arman

    Hi:
               Debit balance for vendor means something is to be received from vendor so that it will not be included in payment list. F110 looks for credit line items for postings,. Stand alone debit balances can not be picked up by default since  during the payment run you need to net them off first. However if you want to consider debit balance for netting off then, put invoice reference in FB60 , system will club the amount of debit line items with respect to credit line items of that particular invoice. Hope this will help you.
    Regards

  • Payment advices in F110 to be sent by email (PDF format) - step by step

    Hi SDN,
    We have a requirement to automatically send payment advices in F110 via email. The requirement is to send the file in PDF format. I've done a lot of browsing through in the forums, as well as check SAP notes, but none has really detailed a step by step process on how to go about it.
    I've also checked SAP NOTE 836169, but it is also not that detailed.
    Assuming that SCOT has been already set up by BASIS, I've done the following steps to test if the auto-email works, and here are the steps I did.
    1. Vendor Master Data -Define u2018Std communication methodu2019 as SMTP (Internet mail) and maintain an email address in the vendor master data.
    3. T-Code BERP u2013 Code to find the relevant BTE. Use the Selection Attribute to browse for your business area. In my case, it is AP-Payment Transactions hence FI-AP-AP-PT.
    00002040 is the relevant process. This is a Function called SAMPLE_PROCESS_00002040. In this case, the FM only checks for an email address in the Vendor Master. If more logic is required a Z-version would need to be created.
    4. Use t-code FIBF to create the enhancement.
    a) Create a product.
    A product groups together customer enhancements to BTEu2019s developed in the customer's namespace. All customer enhancements assigned to a certain customer product can be released with the Activate Customer Product indicator. The OPEN_FI function module for a certain customer enhancement cannot find the corresponding customer function modules, until this has been done.
    Create the product name (for example ZMAIL) and make it active.
    FIBF->Settings->Products->u2026of a Customer
    b) Assign the BTE to the FM:
    Settings->Process Modules->u2026of a customer
    Assign the 00002040 process to the FM and Product.
    5. Run the autopayment program F110.
    After I run the following steps, no email is being generated by the system. Is there anything that I still need to do? Or could anybody please kindly provide a step-by-step process? I'm a functional person, so I won't be able to do ABAP programming for this. Thanks and regards to all

    Hello,
    Check SCOT and SOST transactions.
    At a previous client using 4.6C we did a program and allocated it in F110.  The program reviewed the payment tables and sent the payment advice (basic list) to the employee vendors. 
    Also check http://wiki.sdn.sap.com/wiki/display/sandbox/SendMailwithPDFAttachment
    Regards
    Waza

  • Seperate payment advice for F110 run

    Hello,
    I am using TX f110 for automatic payment processing. The config is done based on PMW with SAPLFPAYM_US program and not the classical RFFO* programs. I need to generate an email to vendor after the payment run, for this i used BTE 2040 in RFFOAVIS_PAYM, which is in the print/datamedium tab in F110. When i do the payment run I am getting a following message and no payment advice is generated.
    Program RFFOAVIS_FPAYM: No records selected F0 073.
    Please suggest what am I missing and how to overcome this problem.

    Hi Atif,
    How to control flagging of reguh-xavis? PMW documentation shows that RFFOAVIS_FPAYM can be used to print payment advices, but for some reason its not happening in F110, I am sure I am missing something but not able to figure out. I will check in FBPM for the same. Will RFFOAVIS_FPAYM be called even if I generate payment medium in FBPM?

  • Payment methods for automatic incoming payment processing.

    Hi,
    We have been using 'f110'  program for automatic outgoing payment processing. Now we are trying to set the incoming payment processing using the same program.  It should be mentioned that its a Canadian organization.  For outgoing payment, we have been using Bank transfer method, one of the available methods for outgoing payment. Our organization wants the same bank transfer method for the incoming payment processing. However, Bank transfer method is not belong to the group of incoming payment methods, rather it has the following methods:
                          1. Debit memo
                          2.   Bill/ex
                          3. Bill/ exch. pyt req.
                          4. Payment demand .
    I am just wondering is there anyway we can include the bank transfer method inside the incoming payment group or we can use any of the existing method for the same purpose.      
    Reagrds,
    Lokman

    Dear Lockman,
    The payment method "B" can just be:   
    If outgoing payment:   Bank Transf           
    If incoming payment:   Debit memo            
    So Debit memo means Bank transfer for incoming payment.
    I hope this helps.
    Mauri

  • Automatic Payment Process through Schedule Manager

    Dear Experts,
    I am an infant in SAP..just started my foot steps by formally taking up a sap course from siemens. I would like to get a complete configuration details for the scheduling automatic payment process. The scenario I could think of is a weekly payment run for a company code at 7.30 pm..Please help.
    Thanks,
    Aspirant

    Hi,
    In FBZP you need to do the config. for the automatic payment.
    1All co codes:fill the paying co code.
    2)Paying co codes :give Min and Max amount for payment and form payment advise.
    3)Payment methods in country :In country creat the p.method
    eg: for cheque :pay method 'c',select outgoing payments,check and give document type for paymentand under apyment medium program 'rffous_c'
    4)payment methods in co code:give the same pay method (c)in your co code here and amt lmt and form for payment medium
    5)bank determination:give the bank details i.e crcy,paymethod,house bank,account id,bank sub account,available amts etc.
    6)house banks:give the detials of your bank account.
    there will be no schedule job for f110.
    Further you need to configure check lot,house banks for this.
    regards

  • Withhold taxes not withheld - F110 Program

    Hi SCN members,
    When the users performed the F110 program and generated the txt file to the bank (That is who print the bank slip.), the bank noticed that the gross amount was printed in the bank slip without subtract the taxes.
    These documents were generated from billing process VF04.
    Apparently, the issue is in the billing documents and not in F110 process because with the user, we have reversed a payment of one document and we have tried to pay it on F110. The result was the same.
    All taxes are not been subtract and not only the taxes withheld in F110. The IRRF tax is withheld in billing process and also is not been subtract.
    I’ve never seen something like that. Have you seen?
    Thanks so much!

    Hi ,
    have you configured Withholding tax on Payment .
    System deduct the withholding tax  In f110 when you configure  Withholding tax type for payment and assign to you comapny code . and then Mainatin in Vendor/ customer master.
    Please check the setting and let us know .

  • Change batch header of out bound ACH payment file??

    Hi all,
    Currently in the batch header of settlement file for all processed ACH transactions, we are using PPD(Prearranged Payment and Deposit Entry) as standard entry class code for all type of CA's(residential and business)
    we need to change in the batch header of the out bound ACH payment file as....PPD for residential customer and CCD(Cash Concentration & Disbursement) for commercial  customer...
    The batch is consisting of the programs SAPFKPY3  and RFKPYL00_MASS.
    please suggest how can we change the batch header of the out boun file.
    Any help appreciate..

    Srinivas-
    That field in company batch header with record type is called "effective entry date". Please look at the attached thread.
    Effective Entry Date
    Shail

Maybe you are looking for