ACPI Error filling up logs, is generally disconcerting.

I keep getting these errors in my kernel log
Sep 6 00:02:01 computer kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L09] (Node eb80fdb0), AE_LIMIT
Sep 6 00:02:01 computer kernel: ACPI Exception (evgpe-0568): AE_LIMIT, while evaluating GPE method [_L09] [20090320]
Sep 6 00:02:01 computer kernel: ACPI Error (hwvalid-0154): Illegal I/O port address/length above 64K: 0x00400020/4 [20090320]
Sep 6 00:02:01 computer kernel: ACPI Exception (evregion-0422): AE_LIMIT, Returned by Handler for [SystemIO] [20090320]
They just repeat over and over again. The only problem I'm noticing is my logs are getting ridiculously large. I could probably change syslog around and never know I have a problem but I figure that would just lead to trouble later on. Google and some other linux sources turned up nothing helpful on these errors. So I'm hoping someone can atleast tell me where to start looking if they don't know exactly what's wrong.

Suppose if the source or the endsystem is in maintenance and is not availabel for the whole day.Now a days, it should be really a very rare scenario where a system goes down for an entire day for maintenance. 2-3 hours maintenance window is normal. If in your case, long maintenance windows are normal and frequent then I would suggest to change the design. Instead of polling remote system, let remote system push the files to OSB server (may be on JMS or any other persistent destination) and then even if remote system goes down it won't affect OSB.
As far enabling and disabling proxy services are concerned, you may handle it through scripts or java API's -
https://blogs.oracle.com/ateamsoab2b/entry/automatic_disabling_proxy_service_when
http://orasoa.blogspot.in/2011/05/disable-and-enable-osb-proxy-services.html
still no other choice?If most of the maintenance windows are scheduled then it is easy to handle the scenario with manual enable/disable of proxy services, but if mostly it is unscheduled then changing the solution design seems better option.
Regards,
Anuj

Similar Messages

10.4.9 Upgrade: Fails. Reboot results in Kernel Panic ACPI error

I am upgrading 11 MacBook Pros 10.4.6 to 10.4.9. Becasue they are all on a slow Wifi I am using the manual updates via a thumb drive.
So far 2 out of 6 have failed the install process. One gave me a general error. I tried to re-run the program but when I did the font for the drop down menu turned into all boxes with capital As inside them. In both cases when I have rebooted I have gotten a Kernel Panic ACPI error. I have tried all the Kernel Panic tricks mentioned in the 10.4.9 threads. I am now reinstalling on the two machines.
1 of 6 did the install just fine but is now stopped on the "Starting Mac OS X..." screen with a full blue bar.
Does anyone have any idea what is wrong?

You may find the following useful:
From a recent article at MacFixit:
Mac OS X 10.4.9 Special Report: Update procedure recommendation
First, make a full backup of your current Mac OS X installation -- preferably a clone ( try SuperDuper! or Carbon Copy Cloner). If something goes wrong, or you experience a major incompatibility after updating, the backup will prove invaluable.
Next, if you are the cautious type, run a disk repair on the volume targeted for installation. You can use an n alternative startup drive or your Mac OS X installation disc. If you are starting up from your Mac OS X install disc, put the disc in your optical drive and restart holding down the "C" key. After your system starts up and you've selected your language, go to the "Utilties" menu and select "Disk Utility." Use the "Repair Disk" function. After disk repairs are complete, restart from your normal startup drive and continue.
Avoid performing any other operations (in Mac OS X or third-party applications) while the update process is occurring.
Performing other tasks during the update process potentiates various issues, including problems with prebinding (which is happening during the "Optimizing the system" phase of the update process) and others that can occur when files are being replaced by the update are also being read/written by the currently logged in user. You should not only refrain from launching applications or working with files during the update process, but also from putting the system to sleep, disconnecting/connecting devices, and other potentially interruptive actions.
In addition, before installing the update, make sure all Apple-installed applications and utilities are in their original locations. Moving one of these applications to a different location on your hard drive can lead to an incomplete update. Also, disconnect any FireWire/USB devices before applying Mac OS X 10.4.9 (except for your startup drive, if it is FireWire or USB, and your keyboard/mouse), then re-connect the devices one by one (checking for issues created by any particular device) after the update process is complete and the system has restarted. Also, note that the first restart after applying Mac OS X 10.4.9 may be abnormally long. Subsequent restarts should take place at normal speed.
And this further article from MacFixit is also very important:
When a Mac OS X update won't install with "Volume does not meet requirements for this update" message
The error message "Volume does not meet requirements for this update" may appear when attempting to install a Mac OS X updater or a full release from disc. Generally the problem falls into one of the following categories:
Make sure you are using the right updater (Server vs. client) There are usually a few varieties of the same Mac OS X update version. Make sure that you are not trying to install the Intel client build on a PowerPC-based Mac, or the Server build on a Mac OS X client system.
Although we generally recommend using the standalone Mac OS X updaters rather than Software Update, the latter method will generally correctly identify the copy of Mac OS X applicable to your current system state.
Retail vs. shipped-with-system (build numbers) Different Macs ship with different builds of Mac OS X, and one build may not be compatible with a different system. The build that ships with a MacBook Core 2 Duo, for instance, may not properly install on a Mac Pro. Hence you may receive the "Volume does not meet requirements for this update" message when mixing and matching systems and discs.
Some retail copies of Mac OS X 10.4.x may also be unable to install on some systems that require newer builds.
In addition, it appears that while some builds will install on specific systems, those systems will then refuse to accept subsequent updates. To ensure compatibility, inspect the following matrices:
• Mac OS: Versions, builds included with Intel-based Macs
http://docs.info.apple.com/article.html?artnum=303315
• Mac OS: Versions, builds included with PowerPC Macs (since 1998)
http://docs.info.apple.com/article.html?artnum=25517
and note that you should not use a Mac OS version earlier than the one included with the computer.
Combo vs. Delta Remember that delta Mac OS X updaters can only update systems version-to-version, e.g. Mac OS X 10.4.8 to Mac OS X 10.4.9. Combo updaters can bring any version within the scope of a major release (Panther, Tiger, etc.) up-to-date, e.g. Mac OS X 10.4.3 to Mac OS X 10.4.9.
Attempting to run a delta update on anything other than the directly precedent version may result in the "Volume does not meet requirements for this update" message.

MacBook Air running Bootcamp getting ACPI errors in Windows

We have a number of MacBook Air 13" mid-2014 A1466 models running Bootcamp with Windows 7 64 bit Enterprise.
(We image them with Windows & Bootcamp, no Mac OS X partition)
We are using latest Bootcamp 5.1.5640 drivers
They work fine for most applications.
We are regularly getting ACPI errors
The error in Windows System log is
Source: ACPI
Description: The embedded controller (EC) did not respond within the specified timeoutperiod. This may indicate there is an error in the EC hardware or firmware that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.
The error we are seeing is when a user is logged into a Windows domain it should pass the Windows password to other applications like Outlook, Lync, etc. Instead, on these Macs, they regularly prompt for the Windows password to re-connect to the source. We don't get this issue with normal Windows PCs.
Also booting has a slight delay of around 10 seconds before Windows begins loading. Don't this delay with older MacBook Airs.
Have looked at repairing Bootcamp drivers. EFI & SMC looks up to date, had to use Mac boot USB to check this info.

VikingBrad wrote:
Just re-reading my post and I was unclear. Yes we do use EFI and boot directly into Windows.
This is good to know.
The Windows partition is joined to an AD domain and logs in fine with AD credentials.
The only problem being that when we open Outlook or Lync or other apps that require AD authentication the user is prompted for their AD credentials.
We have cleared Credential Manager in Windows, tried different users with no success. It works with older MacBooks and Windows PC. Seems to just be these latest MacBook Air 2014 models with the issue. After user re-enters AD credentials they can connect to Outlook, etc.
This may be a bit off-topic, but Macs do not "officially" support Enterprise versions of Windows. Can I suggest using a test 2014 MBA, installing W7/W8 64-bit, and configuring for AD authentication and testing. Are there any known DNS issues on this Macs? In all the applications which do not function correctly, does the username show up correctly populated, when prompted for login?
The only error we see in Event log is the ACPI error so suspect it is related. But we have latest Bootcamp drivers from Apple perhaps we are off track.
If the user successfully enters credentials when prompted for say, Outlook, and the computer is made to sleep or hibernate, is the connection to Outlook/Lync still up if the timeout for sessions (if any) has not yet expired and the computer is woken up?
It may also be worthwhile to look for requests being made for authentication before the applications prompt the user for credentials.

I have a HP Laserjet 4345MFP with Device Errors in the log

I have an HP LaserJet 4345 MFP with Device Errors in my log, How do I resolve this issues. It is obvoisly not a Windows 7 issue, or a connectivitiy Issue, it is a machine issue, if you would like me to continue using HP products for my company I think you would be wise and fix your website so it will let me ask the questions I have about it so I can get a decent answer to help me resolve my issues. HP has the worst forums I've ever seen..
50 Jan-17-2012 01:37 PM 136100 49 0665 09.170.8 5E90 2356 Device Error
49 Jan-17-2012 01:42 PM 136103 49 0665 09.170.8 5E90 2356 Device Error
48 Jan-09-2012 04:23 PM 134393 49 0665 09.170.8 5E90 2356 Device Error
47 Dec-29-2011 01:36 PM 132772 41.03.00 09.170.8 GENERAL MISPRINT ERROR
46 Dec-29-2011 11:31 AM 132748 30.01.03 09.170.8 ADF PICK ERROR
45 Nov-04-2011 11:47 AM 125334 41.03.00 09.170.8 GENERAL MISPRINT ERROR
44 Nov-04-2011 11:47 AM 125334 13.06.00 09.170.8 FUSER OUTPUT, PAPER STOPPED JAM
43 Nov-04-2011 11:46 AM 125333 41.03.00 09.170.8 GENERAL MISPRINT ERROR
42 Nov-04-2011 11:43 AM 125332 13.02.00 09.170.8 PAPER FEED 1, PAPER STOPPED JAM
41 Oct-26-2011 05:21 PM 122984 30.01.02 09.170.8 ADF PAPER JAM

Hi wonka001,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Error in Change Log of Sales Documents

When i try to see the Change Log of sales document (Tools> Change Log) I get an error message
No matching records found " (ADOC)(ODBC - 2028) [Message 131-183]
What can it be ?

Yes it should, but maybe those documents were created before the "History / Log" in General Settings > Services were changed from 0 to (example) 99.
Only after this action, information will be recorded in the Chang Log.
Regards
Carin

Enterprise Manager Database Control Errors in Alert.log

Hi all
I'm posting it this forum because i think it is the best place to get some help, i suspect it is something in Entreprise Manager Database Console
sometimes i get errors in Alert.log
Errors in file e:\admin\orapd\udump\orapd_ora_3456.trc:
ORA-25254: time-out in LISTEN while waiting for a message
ORA-06512: at "SYS.DBMS_AQ", line 577
ORA-06512: at "SYSMAN.EMD_NOTIFICATION", line 492
ORA-06512: at line 1
Generally this error is generated when the database is shutdow for backup (3 AM)
In the shutdown script i terminate the DatabaseConsole service before i shutdown the database:
Shutdown Script:
@echo off
REM Script de shutdown base de dados orapd
REM Rui Madaleno , 2004/11/23
echo Shutdown consola de administracao ...
net stop oracledbconsoleorapd
echo Parar o servico OracleCSService ...
net stop oracleCSService
echo Parar o servico OracleOraApacheProcessManager
net stop OracleOraApacheProcessManager
echo Parar o Listener da base de dados
e:\oracle\bin\lsnrctl.exe stop
echo Shutting down database ORAPD ....
e:\oracle\bin\oradim.exe -shutdown -sid orapd -syspwd XXXX -shuttype srvc,inst -shutmode immediate
My environment:
Windows 2003 Server
Compaq Proliant DL580 G2 Server
Oracle Database 10.0.1.0.2
How can i avoid this errors ???
Thanks in Advance
Rui Madaleno

Dear ,
I am facing same problem, detail is
Errors in file d:\oracle\product\10.1.0\admin\oracle\udump\oracle_ora_2952.trc:
ORA-25254: time-out in LISTEN while waiting for a message
ORA-06512: at "SYS.DBMS_AQ", line 577
ORA-06512: at "SYSMAN.EMD_NOTIFICATION", line 492
ORA-06512: at line 1
this problem is happen suddenly and user are not get new connection with database.
thanks in advance

[DG Physical] ORA-00368: checksum error in redo log block

Hi all,
I'm building a DR solution with 1 primary & 2 DR site (Physical).
All DBs use Oracle 10.2.0.3.0 on Solaris 64bit.
The first one ran fine for some days (6), then I installed the 2nd. After restoring the DB (DUPLICATE TARGET DATABASE FOR STANDBY) & ready to apply redo. The DB fetched missing arc gaps & I got the following error:
==================
Media Recovery Log /global/u04/recovery/billhcm/archive/2_32544_653998293.dbf
Errors with log /global/u04/recovery/billhcm/archive/2_32544_653998293.dbf
MRP0: Detected read corruption! Retry recovery once log is re-fetched...
Wed Jan 27 21:46:25 2010
Errors in file /u01/oracle/admin/billhcm/bdump/billhcm1_mrp0_12606.trc:
ORA-00368: checksum error in redo log block
ORA-00353: log corruption near block 1175553 change 8236247256146 time 01/27/2010 18:33:51
ORA-00334: archived log: '/global/u04/recovery/billhcm/archive/1_47258_653998293.dbf'
Managed Standby Recovery not using Real Time Apply
Recovery interrupted!
Recovered data files to a consistent state at change 8236247255373
===================
I see that may be RFS get the file incorrectly so I ftp to get this file & continue the apply, it pass. Comparison the RFS file & ftp is difference. At that time, I think that something wrong with the RFS because the content of arc is not right. (I used BACKUP VALIDATE ARCHIVELOG SEQUENCE BETWEEN N1 AND N2 THREAD X to check all arcs the RFS fetched, there was corrupt in every file);
I restore the DR DB again & apply incremental backup from the primary, now it run well. I don't know what's happening as I did the same procedures for all DR DB.
Yesterday night, I have to stop & restart DR site 1. Today, I check and it got the same error as the 2nd site, with corrupted redo. I try to delete the arcs, & let RFS to reget it, but the files were corrupt too.
If this continue to happen with the 2nd site again, that'll be a big problem.
The DR site 1 & Primary is linked by a GB switch, site 2 by a 155Mbps connection (far enough for my db load at about 1.5MB/s avg apply rate).
I seach Oracle support (metalink) but no luck, there is a case but it mentions max_connection>1 (mine is default =1)
Can someone show me how to troubleshooting/debug/trace this problem.
That would be a great help!
Thank you very much.

This (Replication) is the wrong forum for your posting.
Please post to the "Database - General" forum at
General Database Discussions
But, first, log an SR with Oracle Support.
Hemant K Chitale

Event Viewer ACPI error MBP mid09

Hi, I have installed Win 7 on my MBP 5.5 mid 2009 and although its running well I am getting an error message in event viewer saying:
Error
25/09/2014 00:00:32
ACPI
13
None
something about the embedded controller failed to start in a reasonable time. Would anyone with the same mac please check their event logs to see if they have this error please?
I had this and a HAL error under Win 7 ultimate x64 (used this as a test os) so I installed Win 7 Pro from a Genuine Disc (I do not condone piracy) and I am getting the ACPI error (only after all the drivers were installed, the error message didnt show prior to boot camp 4 install). So before I spend £100 on a Genuine Windows disc (I already purchased Windows 8 at £106 but it seems apple dont support it on this mac :-(...) I'd like to know if its a failing logic board or driver related.
Thanks in advance
Darren

I have been running OSX for around 1 hour and then I rebooted into windows 7, loaded the event logs immediately and found the ACPI error had been recorded precisely 1 hour before windows had booted, I am wondering if this could be a bug between Mac/Windows time feature. after more restarts the ACPI isn't being recorded and other events times are correct.
edit:
I have just disabled the Synchronise with internet time feature in windows. I'll keep a look out.

Seeing an unknown error in our logs, possible corruption

We recently experienced some corruption of a (Publishing) Pages library in one site and a (Publishing) Documents library in another. They are not sub-sites of each other, both are off of the root site. In one case (Pages) the Allitems view was corrupt and
no one could add or edit pages, even though the URLs were correctly returned for the users. In the second case, the Documents library, was even more corrupt, the columns, content types and views were gone in the library settings.
I am seeing two errors in my logs which may or may not relate to this. the first one I think does as this error occurred each time I tried to access the Document library:
Cannot complete this action. Please try again.
Failed to compile XML.
SOAP exception: Microsoft.SharePoint.SPException: Cannot complete this action. Please try again. ---> System.Runtime.InteropServices.COMException (0x80004005): Cannot complete this action. Please try again.     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFieldsSchemaXml(String
bstrUrl, String bstrListName, ISP2DSafeArrayWriter p2DWKProps, ISP1DSafeArrayWriter p1DFullXML)     at Microsoft.SharePoint.Library.SPRequest.GetFieldsSchemaXml(String bstrUrl, String bstrListName, ISP2DSafeArrayWriter p2DWKProps, ISP1DSafeArrayWriter
p1DFullXML)     --- End of inner exception stack trace ---     at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)     at Microsoft.SharePoint.Library.SPRequest.GetFieldsSchemaXml(String
bstrUrl, String bstrListName, ISP2DSafeArrayWri...   4ea48e8c-5745-4d46-8eff-e0c2f1ba2d1a
07/19/2012 09:56:07.49*   w3wp.exe (0x1BFC)                          0x1610   SharePoint Foundation
    General                          avfx   High       ...ter
p2DWKProps, ISP1DSafeArrayWriter p1DFullXML)     at Microsoft.SharePoint.SPFieldCollection.EnsureFieldsSafeArray(Boolean bGetFullXML)     at Microsoft.SharePoint.SPFieldCollection.Undirty()     at
Microsoft.SharePoint.SPBaseCollection.GetEnumerator()     at Microsoft.SharePoint.SoapServer.SiteDataImpl.GetListXml(XmlTextWriter w, SPWeb spWeb, SPList spList, Boolean ignoreSecurityIfInherit, Int32 schemaVersion)
at Microsoft.SharePoint.SoapServer.SiteDataImpl.GetContent(ObjectType objectType, String objectId, String folderUrl, String itemId, Boolean retrieveChildItems, Boolean securityOnly, String& lastItemIdOnPage)     at Microsoft.SharePoint.SoapServer.SiteData.GetContent(ObjectType
objectType, String objectId, String folderUrl, String itemId, Boolean retrieveChildItems, Boolean sec...   4ea48e8c-5745-4d46-8eff-e0c2f1ba2d1a
07/19/2012 09:56:07.49*   w3wp.exe (0x1BFC)                          0x1610   SharePoint Foundation
    General                          avfx   High       ...urityOnly,
String& lastItemIdOnPage)   4ea48e8c-5745-4d46-8eff-e0c2f1ba2d1a
The second error does not even show up in Google search:
User Profiles Unexpected SiteACLValidator: search request returned a site that was not requested
So, I am at a loss where to look for a solution to these problems. Does anyone have an idea why this corruption might be occurring? And, if so, what we can do to stop it?
Thanks.

Hi I have the same issue, how did you find it was the Allitems view that was corrupted?
I have no views over my list thats corrupted.

ERROR CREATED UNDER \SYSMAN\RECV\ERRORS FILLING UP THE HARD DISK

I am using Content DB 10.2.0.0.1 with Infrastucture 10.1.2.0.2 on Windows 2003, and have the situation as described in Bug No. 6164515 on Metalink:
"ERROR CREATED UNDER \SYSMAN\RECV\ERRORS FILLING UP THE HARD DISK
Files like A0000000064.err_2007_06_29_17_45_53 are created in %ORACLE_HOME%\clin-app-01_oasinfra\sysman\recv\errors\ one every minute on the oracle infrastructure instance, filling up the hard disk and bringing the application to a hault."
I have such log generation too, for a few month nearly 10 Gb of logs have been generated. The content of the files are similar, and begin with:

<UPLOAD OMS_PROTOCOL_VERSION="10.1.0.2.0" UPLOAD_TYPE="severity" EMD_URL="http://contentdb:1830/emd/main" MERGE_TIMESTAMP="2008-12-09 18:54:48">
<ROWSET OMS_PROTOCOL_VERSION="10.1.0.2.0" TABLE="MGMT_METRIC_ERRORS">
What can i do to stop this generation?
Is it possible to disable logging, or i need to apply some patch?
Thank you.

Hi,
Anyone have any solution on this error?
I have Oracle DB 10g 10.2.0.3 installed on Windows 2003 32-bit.
c:/oracle/product/10.2.0/db_1/demo_crcl/sysman/recv/errors keeps increasing until 211 GB.
Any kind helps are highly appreciated.
Thanks.

PnP ACPI error at the time instalation.

Hi i am using Enterprise-R5-U4-Server-x86_64, while installing on IBM X3400 M3 model its shows following error
PnP ACPI - Method_name_CRS failure for PnPP0a03 at the time of booting and machine is rebooting after one hours.
Please tell me the solution to it.

Sir,
I try to disable ACPI=off at boot promt ,but the macine get restart the afterone hours.
The kernel version installed is 2.6.18.164.el5xen
and i also trace the error in /var/log /message ,following message i found
testdb kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
testdb kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
testdb kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
testdb kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
testdb kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
testdb kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
testdb kernel: ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
testdb kernel: IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
testdb kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
testdb kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
testdb kernel: Setting APIC routing to xen
testdb kernel: Using ACPI (MADT) for SMP configuration information
testdb kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
testdb kernel: Built 1 zonelists. Total pages: 448326
testdb kernel: Kernel command line: ro root=LABEL=/ rhgb quiet
testdb kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
testdb kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: GSI 17 sharing vector 0xA0 and IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: GSI 18 sharing vector 0xA8 and IRQ 18
testdb kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 18
testdb kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 18
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
testdb kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
testdb kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
testdb kernel: Real Time Clock Driver v1.12ac
testdb kernel: Non-volatile memory driver v1.2
testdb kernel: Linux agpgart interface v0.101 (c) Dave Jones
testdb kernel: brd: module loaded
testdb kernel: Xen virtual console successfully installed as ttyS0
testdb kernel: Event-channel device installed.
testdb kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
testdb kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
testdb kernel: ESB2: IDE controller at PCI slot 0000:00:1f.1
testdb kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
testdb kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
testdb kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
testdb kernel: uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
testdb kernel: usb usb2: configuration #1 chosen from 1 choice
testdb kernel: hub 2-0:1.0: USB hub found
testdb kernel: hub 2-0:1.0: 2 ports detected
testdb kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 23 (level, low) -> IRQ 19
testdb kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
testdb kernel: ACPI: Power Button (FF) [PWRF]
testdb kernel: ACPI: Power Button (CM) [PWRB]
testdb avahi-daemon[2779]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
testdb kernel: Dazed and confused, but trying to continue
testdb kernel: Do you have a strange power saving mode enabled?
testdb syslogd 1.4.1: restart.
testdb kernel: klogd 1.4.1, log source = /proc/kmsg started.
testdb kernel: Bootdata ok (command line is ro root=LABEL=/ rhgb quiet)
testdb kernel: Linux version 2.6.18-164.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Sep 3 04:41:04 EDT 2009
testdb kernel: BIOS-provided physical RAM map:
testdb kernel: Xen: 0000000000000000 - 000000006d746000 (usable)
testdb kernel: DMI present.
testdb kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
testdb kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
testdb kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
testdb kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
testdb kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
testdb kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
testdb kernel: ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
testdb kernel: IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
testdb kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
testdb kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
testdb kernel: Setting APIC routing to xen
testdb kernel: Using ACPI (MADT) for SMP configuration information
testdb kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
testdb kernel: Built 1 zonelists. Total pages: 448326
testdb kernel: Kernel command line: ro root=LABEL=/ rhgb quiet
testdb kernel: Initializing CPU#0
testdb kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
testdb kernel: Xen reported: 1861.949 MHz processor.
testdb kernel: Console: colour VGA+ 80x25
testdb kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
testdb kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
testdb kernel: Software IO TLB enabled:
testdb kernel: Aperture: 2 megabytes
testdb kernel: Kernel range: 0xffff880000df8000 - 0xffff880000ff8000
testdb kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
testdb kernel: Memory: 1735168k/1793304k available (2490k kernel code, 49284k reserved, 1388k data, 184k init)
testdb kernel: Calibrating delay using timer specific routine.. 4657.90 BogoMIPS (lpj=9315810)
testdb kernel: Security Framework v1.0.0 initialized
testdb kernel: SELinux: Initializing.
Jul 25 04:08:08 testdb kernel: (SMP-)alternatives turned off
testdb kernel: ACPI: Core revision 20060707
testdb kernel: Brought up 2 CPUs
testdb kernel: Initializing CPU#1
testdb kernel: migration_cost=19
testdb kernel: checking if image is initramfs... it is
testdb kernel: Grant table initialized
testdb kernel: NET: Registered protocol family 16
testdb kernel: ACPI: bus type pci registered
testdb kernel: PCI: Not using MMCONFIG.
testdb kernel: PCI: Using configuration type 1
testdb kernel: ACPI: Interpreter enabled
testdb kernel: ACPI: Using IOAPIC for interrupt routing
testdb kernel: ACPI: No dock devices found.
testdb kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
testdb kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
testdb kernel: PCI: Transparent bridge - 0000:00:1e.0
testdb kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *6 7 10 11 14 15)
testdb kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
testdb kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
testdb kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
testdb kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
testdb kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
testdb kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
testdb kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9
testdb kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
testdb kernel: pnp: PnP ACPI init
testdb kernel: ACPI Error (exregion-0165): Could not map memory at 00000000FEC80000, size 100 [20060707]
testdb kernel: ACPI Exception (evregion-0424): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20060707]
testdb kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._CRS] (Node ffff88000002d670), AE_NO_MEMORY
Jul 25 04:08:08 testdb kernel: ACPI Error (uteval-0212): Method execution failed [\_SB_.PCI0._CRS] (Node ffff88000002d670), AE_NO_MEMORY
testdb kernel: pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0a03
testdb kernel: pnp: PnP ACPI: found 10 devices
testdb kernel: xen_mem: Initialising balloon driver.
testdb kernel: usbcore: registered new driver usbfs
testdb kernel: usbcore: registered new driver hub
testdb kernel: PCI: Using ACPI for IRQ routing
testdb kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
testdb kernel: NetLabel: Initializing
testdb kernel: NetLabel: domain hash size = 128
testdb kernel: PREFETCH window 0x00000000d0000000-0x00000000d7ffffff
testdb kernel: GSI 16 sharing vector 0x98 and IRQ 16
testdb kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: GSI 17 sharing vector 0xA0 and IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: GSI 18 sharing vector 0xA8 and IRQ 18
testdb kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 18
testdb kernel: NET: Registered protocol family 2
testdb kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
testdb kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
testdb kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 18
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 16
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: assign_interrupt_mode Found MSI capability
testdb kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
testdb kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
testdb kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
testdb kernel: Real Time Clock Driver v1.12ac
testdb kernel: Non-volatile memory driver v1.2
testdb kernel: Linux agpgart interface v0.101 (c) Dave Jones
testdb kernel: brd: module loaded
testdb kernel: Xen virtual console successfully installed as ttyS0
kernel: Event-channel device installed.
kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
kernel: ESB2: IDE controller at PCI slot 0000:00:1f.1
kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 17
kernel: ESB2: chipset revision 9
kernel: ESB2: not 100% native mode: will probe irqs later
kernel: ide0: BM-DMA at 0x18c0-0x18c7, BIOS settings: hda:DMA, hdb:pio
kernel: hda: HL-DT-STDVD-RAM GSA-H55N, ATAPI CD/DVD-ROM drive
kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
kernel: ide-floppy driver 0.99.newide
kernel: usbcore: registered new driver hiddev
kernel: usbcore: registered new driver usbhid
kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
testdb kernel: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
testdb kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
testdb kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
testdb kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
testdb kernel: mice: PS/2 mouse device common for all mice
testdb kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
testdb kernel: md: bitmap version 4.39
testdb kernel: TCP bic registered
testdb kernel: Initializing IPsec netlink socket
kernel: GSI 19 sharing vector 0x41 and IRQ 19
testdb kernel: sda: sda1 sda2 sda3
testdb kernel: sd 0:0:0:0: Attached scsi removable disk sda
testdb kernel: Vendor: IBM-ESXS Model: ST3146755SS Rev: BA32
testdb kernel: Type: Direct-Access ANSI SCSI revision: 05
testdb kernel: Vendor: IBM-ESXS Model: GNA146C3ESTT0Z N Rev: BH0G
testdb kernel: Type: Direct-Access ANSI SCSI revision: 05
testdb kernel: Vendor: IBM-ESXS Model: GNA146C3ESTT0Z N Rev: BH0G
testdb kernel: Type: Direct-Access ANSI SCSI revision: 05
testdb kernel: Vendor: IBM-ESXS Model: GNA146C3ESTT0Z N Rev: BH0G
testdb kernel: Type: Direct-Access ANSI SCSI revision: 05
testdb kernel: Vendor: IBM Model: SAS SES-2 DEVICE Rev: 1.06
testdb kernel: Type: Enclosure ANSI SCSI revision: 05
testdb kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
testdb kernel: device-mapper: uevent: version 1.0.3
testdb kernel: device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: [email protected]
testdb kernel: device-mapper: dm-raid45: initialized v0.2594l
testdb kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
testdb kernel: EXT3-fs: write access will be enabled during recovery.
testdb kernel: kjournald starting. Commit interval 5 seconds
testdb kernel: EXT3-fs: recovery complete.
testdb kernel: EXT3-fs: mounted filesystem with ordered data mode.
testdb kernel: SELinux: Disabled at runtime.
testdb kernel: type=1404 audit(1311581265.509:2): selinux=0 auid=4294967295 ses=4294967295
testdb kernel: parport: PnPBIOS parport detected.
testdb kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
testdb kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
testdb kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
testdb kernel: hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
testdb kernel: Uniform CD-ROM driver Revision: 3.20
testdb kernel: tg3.c:v3.96-1 (November 21, 2008)
testdb kernel: ACPI: PCI Interrupt 0000:1a:00.0[A] -> GSI 16 (level, low) -> IRQ 17
testdb kernel: eth0: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet
testdb kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 18
testdb kernel: BIOS-provided physical RAM map:
testdb kernel: Xen: 0000000000000000 - 000000006d746000 (usable)
testdb kernel: DMI present.
testdb kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
testdb kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
testdb kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
testdb kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
testdb kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
testdb kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
testdb kernel: ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
testdb kernel: IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
testdb kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
testdb kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
testdb kernel: Setting APIC routing to xen
testdb kernel: Using ACPI (MADT) for SMP configuration information
testdb kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
testdb kernel: ACPI: bus type pci registered
testdb kernel: PCI: Not using MMCONFIG.
testdb kernel: PCI: Using configuration type 1
testdb kernel: ACPI: Interpreter enabled
testdb kernel: ACPI: Using IOAPIC for interrupt routing
testdb kernel: ACPI: No dock devices found.
testdb kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
testdb kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
testdb kernel: PCI: Transparent bridge - 0000:00:1e.0
testdb kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *6 7 10 11 14 15)
testdb kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
testdb kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
testdb kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
testdb kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
testdb kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
testdb kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
testdb kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9
testdb kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
testdb kernel: pnp: PnP ACPI init
testdb kernel: ACPI Error (exregion-0165): Could not map memory at 00000000FEC80000, size 100 [20060707]
testdb kernel: ACPI Exception (evregion-0424): AE_NO_MEMORY,
Returned by Handler for [SystemMemory] [20060707]
testdb kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._CRS] (Node ffff88000002d670), AE_NO_MEMORY
testdb kernel: ACPI Error (uteval-0212): Method execution failed [\_SB_.PCI0._CRS] (Node ffff88000002d670), AE_NO_MEMORY
* testdb *kernel: pnp: PnPACPI: METHODNAME__CRS failure for PNP0a03_
* testdb kernel: pnp: PnP ACPI: found 10 devices*testdb kernel: xen_mem: Initialising balloon driver.
I also try to find out flash bios from IBM Sites mention. but i could not able to get exact one. Kindly suggest me once again.
Edited by: opcare on Jul 25, 2011 3:55 AM

Lightbeam is filling message log with GetDomain() messages looking for my gateway

When started Gnome is filling my log with:
Dec 27 10:44:42 frank gnome-session[2123]: getDomain(): ip address: 192.168.0.2
Dec 27 10:44:42 frank gnome-session[2123]: console.error: lightbeam:
I have since disabled it but filling start again if I enable Light beam again.

Make a comment in Lightbeam GitHub
*https://github.com/mozilla/lightbeam/issues

WebClient Error - Failed to log on to the comm. mgmt. software

Hi, following the CR410 i have created a webclient profile/ framework, and assigned the profile to an org unit.
now when try to open the webclient using crm_ic, i am getting the above error on the IDES system.
<b>"Failed to log on to the communication management software system"</b>
<b>Details of the above error</b>
Diagnosis
An error occurred while logging in to the communication management software system.
System Response
The multichannel services are not available. You will not be able to work with contacts such as phone calls, e-mails, or chat sessions.
Procedure
Contact your system administrator.
Procedure for System Administration
Review the ICI trace.
what could be error...
Thanks,

Have you configured CTI with IC WebClient? If yes under IC WebCLient profile look for CONTACTCENTER function profile and enter correct profile.
If you do not have CTI in place make sure that CONTACTCENTER entry is blank under IC WebClient profile.
Thanks,
Thirumala.

Error 1017 received logging on to the standby

Hi anyone,
Please help me...
i have database running on Oracle 10gR1 EE (10.1.0.4.0) on Linux Red Hat. and this server is replicate to DR server for backup. we change 'SYS' password about a week ago and nothing occur until today, the database is not connecting to DR server. here is the error obtain from the alert_log file. is there i 've missed anything when changing SYS password?
somebody please help me.. im in horror now.
thanks in advance.
-Nonie

forgot to paste the error.
Mon Jan 21 14:54:20 2008
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
It may be necessary to define the DB_ALLOWED_LOGON_VERSION
initialization parameter to the value "10". Check the
manual for information on this initialization parameter.
-Nonie

Oracle error 1012 ("Not Logged On") & AUTOTRAN=Y

Hi.
I have a problem trying to access an Oracle 8.0.6
database from a 6.5 Tuxedo server.
Both TMS and server execute tpopen correctly
All services are declared as AUTOTRAN
Everything seems to be OK according to the logsgenerated by Oracle XA libraries
However, I always get the Oracle error 1012 ("Not Logged On")
when executing SQL statements from my pro*C server.
I just can't figure out why this error occurs.
I also tried to explicitly open a transaction from the client,
but the result is exactly the same (tpbegin is successfull,
however).
Could someone help me to make this work ?
Thanks.

Solved by removing "DB=<db>" from my OPENINFO string, as far as this parameter
should only be used when using proc*C "EXEC SQL ... AT <db>" statements.
"Mathieu Chauvin" <[email protected]> wrote:
>
Hi.
I have a problem trying to access an Oracle 8.0.6
database from a 6.5 Tuxedo server.
Both TMS and server execute tpopen correctly
All services are declared as AUTOTRAN
Everything seems to be OK according to the logsgenerated by Oracle XA libraries
However, I always get the Oracle error 1012 ("Not Logged On")
when executing SQL statements from my pro*C server.
I just can't figure out why this error occurs.
I also tried to explicitly open a transaction from the client,
but the result is exactly the same (tpbegin is successfull,
however).
Could someone help me to make this work ?
Thanks.

ACPI Error filling up logs, is generally disconcerting.

Similar Messages

Maybe you are looking for