Acrobat Updater for Yosemite from 9.0 - 9.5.5

Hello -
Attempting to run the updater to update to version 9.5.5, when the installer gets to "Installing Update" it pops-under a modal panel for "Install Extras" and waits on a response to that panel; unfortunately i can't bring that panel to the foreground because the updater panel is top most, so i can't click on Continue to unblock the install process.
Does anyone have a solution for this?
Thanks in advance.

I have exactly the same problem with my new computer. There are downloadable updaters on Adobe FTP site but I coudn't sucessfully use any of them...
The way I solved the problem is that I copied the entire Adobe Acrobat 9 Pro folder from my old mac (that one was already at 9.5.5) and then replaced the recently installed folder (I believe it was 9.3.x) on my new mac. Worked like a champ!
The other thing I noticed but didn't try is that after failed attempt to update to 9.5.5 In acrobat Pro Help menu you can hit Repair Acrobat Installation. This way it lets you uncheck the dreaded Adobe PDF viewer safari plugin and hit Continue. But I was too lazy to try and run the update again because it takes forever to download the updater.
Here's the FTP site. Maybe you will have better luck!
ftp://ftp.adobe.com/pub/adobe/acrobat/mac/9.x/

Similar Messages

HT201222 Is it just me or is the last safari update for Yosemite slowing everyone down? Any ideas how to fix it?

Is it just me or is the last safari update for Yosemite slowing everyone down? Any ideas how to fix it?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

AirPlay in future update for Yosemite

is Apple planning for an update for Yosemite soon that will include AirPlay feature

Found on another thread: Is iPhoto deleted by the 10.10.3 update ?
"right-click on iPhoto and show package contents, go in to Contents, and in to the MacOS folder and double click the iPhoto app from there... it launches just fine!"
Works for me too.

Is there an update for bridge from cs4

Since I'm having trouble with my new cs5 suite I was wondering if there were updates for bridge from my old cs4. I need an update to support a new camera.

Bridge does not "support" camera models. Only ACR (Adobe Camera Raw) does.
The last version of Bridge for CS4 is Bridge 3.0.0.64 and the last version of ACR for Photoshop CS4 is ACR 5.7.
If your camera is not supported by ACR 5.7, you would have to download the free, stand-alone Adobe DNG Converter 6.4 and convert your raw files to DNG raw files with it.
Bridge is just a file browser. It does not open or edit files, it just hands them over to the appropriate editor, whether that be ACR, Photoshop, Illustrator, Acrobat or even MS Word. Bridge depends on ACR to bui8ld the thumbnails and previews for raw files.
Incidentally, there is a dedicated Adobe Bridge Macintosh forum:
http://forums.adobe.com/community/bridge/bridge_macintosh?view=discussions&start=0#
Wo Tai Lao Le
我太老了

I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibited ted sign. Any suggestions pls.

I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.

Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

Can I update to yosemite from 10.6.8

Can I update to yosemite from 10.6.8, or do I need to order Lion or Mountain Lion first?
I thought I could just upgrade but when I select UPGRADE, I get messages like: "Safari can't open the specified address"

Well yes, however you do not give enough information. Technically all you need is 10.6.8, but there is more to the equation.
Easy to figure out if you look at this ref of requirements
https://www.apple.com/osx/how-to-upgrade/

I just downloaded the software update for Yosemite after it restarted and installed the software I have a white screen. What should I do ?o

I Just downloaded the latest software for Yosemite 10.10 after it restarted and installed the software it stopped, now I have a white screen. What should I do now?

Hi ..
Hold down the power button until the screen goes black.
Wait about ten seconds then restart your Mac while holding down the Command + R keys.
From there you should be able to access the built in utilities to verify and repair the startup disk if necessary and reinstall OS X. (10.10.1)

Firmware Update for E71s from E-Plus Germany

Dear all,
I was wondering why the firmware update for the Nokia E71 has been out and about for quite some time, but there is still no update available for my E71 which I have bought from the German provider E-Plus. It has no branding nor any visible other customizations for E-Plus. It's product code: 0569284.
Any date for the firmware update?
Thanks.
-Franz

No it isn´t a fraud, the product code only tells you about the software branding (not all software brandings are equally aggressive) and doesn´t automatically means that is has to have operator logos all over the place...
For more information on that have a look at this.
Probably the phone you bought was bought from e-plus in some way. Did it come with a e-plus contract?
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

IPhoto update for Yosemite

I updated to Yosemite and iPhoto won't work till I update it. How do I update it? I don't see anything at Apple's website that gives me a clear way to do it.

Open the Mac App Store, click on Updates, and update it.
(118860)

Are there any known issues when using PSE 13 after installing Apple's recent 10.10.3 Combo update for Yosemite?

I've had Yosemite for some time and bought/installed PSE 13 afterwards.
In the last few days I upgraded to Yosemite 10.10.3.
As a PSE 13 novice I've been working my way through "Adobe Photoshop Elements 13 - Classroom in a Book". Working through the exercises I've found my iMac is sometimes taking longer to process the functions I'm using than prior ro the 10.10.3 upgrade. E.g., using the Healing Brush tools, Straighten Tool etc.
I've struggled with Apple's upgrade and had to re-install my machine from a previous Time Machine Backup and so I was wondering:-
Are there any known issues with PSE 13 post 10.10.3 upgrade?
Are there things I should be concerned about in the future before accepting an OS X upgrade?
Thanks,
Andy

No, no known issues. However it's a good idea to always delete preferences after OS X system updates.

Updating to Yosemite from 10.9. Progress is stuck

I am trying to update my MacBook Pro from 10.9 to 10.10 Yosemite. The update downloaded OK. The problem is the Install progress bar has been stuck for hours. What should I do?

It did not show minutes remaining. The installation progress bar sent to what I guess is about 40%, and never continued. What I did is finally turn it back on, it worked away for several minutes before opening, and then Yosemite was there! No idea why it stopped the day before, or why starting it up during the next day would install Yosemite.

IMovie won't open since i got the update for Yosemite

ever since i updated the mac book pro to Yosemite - it has been slower and also iMovie won't open at all

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
You can also try running the combo update.
10.9.2

Droid X won't download auto updates for apps from Marketplace

I'm having problems with my Droid x auto downloading app update from marketplace. When I try to update an app that is supposed to auto update, my Droid X says "starting download" then goes no farther, even if I let it sit for hours.
On those apps that require a manual update, I have no problems. They download just fine when I tell them to.
Is there anyway to set all my apps to manual update, or does anyone have any idea why the auto downloads won't work?
Thanks.

OK, I figured it out. With the auto download hung up, I hit the cancel button, and then it let me do a manual download that worked just fine.

Downloading my first update for InDesign from creative cloud, got an error code 214. What does that mean?

Need some help, does anyone know what error code 214 means? First action in the creative cloud and this is what I got.

Hi moosies mom,
Please try downloading the update manually from : Adobe - InDesign : For Windows and check.
You might also want to refer to the KB : http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
Regards,
Rave

How to disable Acrobat Updater for Mac Acrobat 8?

The Acrobat 8 manual says one can change updating preferences by "Choose Help > Check For Updates”. But the Help menu in 8.1.6 does not offer that menu item.
AFAICS, there do not appear to be any relevant items in Acrobat Preferences.

The updating preferences are under Edit>Preferences>Auto updates (this latter may not be exact, but the location of the preferences should be correct).

Acrobat Updater for Yosemite from 9.0 - 9.5.5

Similar Messages

Maybe you are looking for