Activation of BEx Web History Failed
Hello All,
I am currently performing the BI-JAVA Portal integration.
I am faced with an error while running the report RS_PERS_ACTIVATE. I got this error message:
Job started
Step 001 started (program RS_PERS_ACTIVATE, variant &0000000000000, user ID DDIC)
STDO: Log could not be written on output device T
Replication completed successfully
Communication Structure /BIC/CS80PERS_BOD activated
Activation of BEx History failed
Job cancelled after system exception ERROR_MESSAGE
The system is open for modifications and I have the SAP_ALL authorization.
Do you have ideas how to correctly activate the BEx History?
Thank you.
Best Regards,
Julius
Hi ,
Just have a look at these notes hope they may be helpfull.
Note 744009 - RS_PERS_ACTIVATE has incorrect initial display
Note 775214 - Personalization is not applied.
Regards,
Rahul.
Similar Messages
-
500 Internal Server Error BEx Web Application
Hello,
can everybody help for the fault, or had the same error ?
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Cannot get connection for 60 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPFactory" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.
Log ID 0014C265209B005B000007300000610A000473C4612CBCB9
thanksHi,
I am getting similar kind of error.Can you please tell me how you resolved the issue.
Regards,
Priyanka -
Bex Web application designer error
Hi experts,
I am getting an error when selecting F4 for FROM and TO in FIscalyear/period in WAD report
FisaclYear/period->F4
Then I go to Slect values for FiscalYear/period where I have
FROM ->F4 and
TO->F4
On clicking F4 for FROM and TO value ranges I am getting this error.
Please sugggest how to solve this error.
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,
Required information for reproduction according to note 948490.
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Invalid program status: Duplicate member created: 0FISCPER3: 2009001, Sids: 182009001 & 92009001
com.sap.ip.bi.bics.exceptions.BicsProgrammErrorException
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.addMember(ProviderInfoObject.java:308)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderAttribute.addMember(ProviderAttribute.java:120)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.retrievePresentations(ProviderInfoObject.java:804)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObjectMember.getValue(ProviderInfoObjectMember.java:64)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.InfoObjectMember.getBaseValue(InfoObjectMember.java:89)
Edited by: hema.t on Nov 15, 2011 10:35 AMhello, i have similar problem.
I've created simple Web template, which shows text "test template", but when i try to open it from the portal I get the error:
""500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Error: Internal error. No esid found.
Log ID 984BE15B700A006C0000029000000E880004BAA5DE640345
Does someone know how to solve this problem? -
Activation of BEx History failed during SPRO setting
Hi,
I was getting error message saying that "Activation of BEx History failed".While configuration setting in SPRO
After upgrade system from BW 3.x to BI 7.0
I was getting the error message during setting in SPRO
Please some one would provide me answer.The error is due to authorization.
You must ask your BASIS guy to open up the server to allow changes.
Once the BASIS did that, just rerun the TCode and it will works correctly.
Hope it helps. -
Error when activating the BEx history
Hi,
When I am trying to activate the BEx history through transaction 'RS_PERS_ACTIVATE', I am getting the error saying 'Activation of BEx History failed'. Then when I checked the DSO '0PERS_BOD' it is inactive also the corresponding table '/BI0/APERS_BOD00' not exists in data dictionary table. Because of this I am getting Error message while opening the BEx analyzer saying 'serious error occured while reading history folder'. So kindly suggest me in making the DSO '0PERS_BOD' active. I hope this will solve the problem.
Thanks in advance,
Steve.Hi,
'Version A of DataStore object 0PERS_BOD does not exist' is not the estimate message.
1. RSA1
2. BI Content
3. Object types
4. grouping -> only necessary objects
5. data store object -> select object
6. search to "0pers_"
7. mark "0PERS_BOD", "0PERS_VAR" and "0PERS_WTE" -> Transfer Selection
8. Install
Sven -
Template installer: BEx Web can't open BI Content Web Templates
Hi all,
Unfortunately, the template installer fails in step 18 (WD JCO Dest. BI_METADATA) and the following steps (similar error).
18 WD JCO Dest. BI_METADATA Import not successful Element 'SAPConfigLib.DEP.Unclassified.maintainJcoDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.DEP.Unclassified.maintainJcoDestination':Error during executing Java Reflection:ABAP Backend doesn't exist in SLD
I installed both the BW and the EP (NW 2004s SR1) as single stacks on 2 servers with local SLD (which I fear was a bad idea), patch level is 11 (except SAP_BW which is 12).
I also tried the Diagnostics Tool which shows some errors:
RED BI Mastersystem
RED URLs Prefixes Customized on Both J2EE and ABAP Side
RED User Mapping of User DDIC
RED WebAS ABAP Certificate and Login Modules Configuration
GREEN BI iView Permissions
GREEN BI Portal System Permissions
GREEN Deployed Components
GREEN Existence of a UME Mastersystem
GREEN NetWeaver.BI Portal Security Zone Permissions
GREEN Required Values in BI Portal Systems
UNDEFINED Synchronized Clocks on WebAS Java and ABAP
UNDEFINED WebAS ABAP Settings
Any help appreciated...
Yours,
Daniel
Message was edited by:
Daniel KölleAdditional info: When I open the Web Template in Web Application Designer, I get some errors. I corrected some of them by reactivating the BI Content version, but some still remain.
Strangley the test system doesn't show the same behaviour although the Web Template are both active and not modified. (Opening BEx Web is working on test system.)
Test System
E23 The data provider could not be instantiated.
E260 Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
E260 Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
W10 Query not present in BW System(Object QU)
W155 Width of Object item:CONTAINER_LAYOUT_ITEM:CONTAINER_LAYOUT_CONTENT is very small (1)
Productive System
E001 Parameter GENERAL_TEXT_ELEMENT of Object item:TEXT_ITEM:QUERY_TITLE unknown to system
E70 Command type SWITCH_AXES of Object command:SWITCH_AXES: not known
E70 Command type SWITCH_AXES of Object command:SWITCH_AXES: not known
E70 Command type SWITCH_AXES of Object command:SWITCH_AXES: not known
E115 Item item:TEXT_ITEM:QUERY_TITLE of type TEXT_ITEM cannot be parent of GENERAL_TEXT_ELEMENT
E115 Item item:CHART_ITEM:CHART of type CHART_ITEM cannot be parent of VISIBLE
E115 Item item:CHART_ITEM:CHART of type CHART_ITEM cannot be parent of LEGEND_VISIBLE
E185 Bad boolean parameter value TRAY_SETTINGS of Parameter WITH_TRAY of Object item:GROUP_ITEM:GROUP_ITEM_1; use 'X' or ''
E180 Illegal Parameter value of Parameter LEGEND_TYPE of Object item:CHART_ITEM:CHART
E210 Choice Parameter DATA_BINDING_TYPE with value STATIC_OPTION_LIST of Object item:DROPDOWN_ITEM:DROPDOWN_DISPLAY has more than one child
E215 Choice Parameter DATA_BINDING_TYPE with value STATIC_OPTION_LIST of Object item:DROPDOWN_ITEM:DROPDOWN_DISPLAY does not match
E210 Choice Parameter LEGEND_TYPE with value of Object item:CHART_ITEM:CHART has more than one child
E360 bi-tag bi:item has unknown attribute key; please check your spelling
E360 bi-tag bi:item has unknown attribute key; please check your spelling
E360 bi-tag bi:item has unknown attribute key; please check your spelling
E360 bi-tag bi:item has unknown attribute key; please check your spelling
E360 bi-tag bi:item has unknown attribute key; please check your spelling
E360 bi-tag bi:item has unknown attribute key; please check your spelling
E360 bi-tag bi:item has unknown attribute key; please check your spelling -
hello,
This is the first time we are using the BEx Web Analyser thru portal
we are recieving following error message. Kindly comment on the same to get it resolved.
- Amit
<b>Root Cause</b>
The initial exception that caused the request to fail was:
More than one master system found: BI7_Alliase, SAP_BW
com.sap.ip.bi.base.service.connection.ConnectionException: More than one master system found: BI7_Alliase, SAP_BW
at com.sap.ip.bi.base.portal.connection.PortalConnectorLandscapeService.getMasterSystemAlias(PortalConnectorLandscapeService.java:137)
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemAlias(GenericConnectionPool.java:78)
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:60)
at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:459)
at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:679)
<b>System Environment</b>
Server
<b>BI Java</b> Release: 7 - Patch level: 0000000012 - Description: BI Web Applications Java - Additional info: - Production mode: true
<b>BI ABAP</b> unknown
<b>Java Virtual Machine</b> Java HotSpot(TM) Server VM - Sun Microsystems Inc. - 1.4.2_12-b03
<b>Operating System</b> Windows 2003 - x86 - 5.2
<b>Full Exception Chain</b>
Log ID 000E7F30E8DE0070000001A600003F1000043E0505810C6D
com.sap.ip.bi.base.service.connection.ConnectionException: More than one master system found: BI7_Alliase, SAP_BW at com.sap.ip.bi.base.portal.connection.PortalConnectorLandscapeService.getMasterSystemAlias(PortalConnectorLandscapeService.java:137) at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemAlias(GenericConnectionPool.java:78) at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:60) at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:459) at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:679) at com.sap.ip.bi.base.application.impl.Application.startApplicationStep(Application.java:279) at com.sap.ip.bi.base.application.impl.Application.initialization(Application.java:259) at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:172) at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:65) at com.sap.ip.bi.webapplications.runtime.impl.Page.constructPage(Page.java:857) at com.sap.ip.bi.webapplications.runtime.impl.Page.<init>(Page.java:734) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.createPage(Controller.java:493) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:886) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:813) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:456) at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)Looks like in the EP System Landscape you have 2 BI systems defined and both systems are defined as Master Systems. This is a property of the System. Make sure you set only one system as the Master system. There should be a one to one mapping between the EP and BI System.
-
BEx Web Analyzer error message
Hi,
I've integrated BI 7.0 with Portal 7.0. Both systems (BI and Portal) running on different servers, SSO is configured both ways and RFC communication is configured from ABAP to J2EE. However when i run the BEx Web Analyzer iView under the Business Intelligence role, i get the following error:-
The initial exception that caused the request to fail, was:
No logical system exists for client 800
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: No logical system exists for client 800
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3962)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3399)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.executeFunction(Jco640Proxy.java:255)
Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Jco exception thrown while executing function "RSWR_METADATA_GET" against system "BIXCLNT800"
at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java:49)
... 44 more
Caused by: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: No logical system exists for client 800
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3962)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3399)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.executeFunction(Jco640Proxy.java:255)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Function.executeRfc(Jco640Function.java:73)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java:47)
... 44 more
Any help on this would be greatly appreciated
- VPriya, ya its already there/..this is the SM50 trace
N dy_signi_ext: ticket expired
N Mon Jun 4 17:57:44 2007
N dy_signi_ext: SSO TICKET logon (client 800)
N mySAPUnwrapCookie: was called.
N HmskiFindTicketInCache: Trying to find logon ticket in ticket cache.
N HmskiFindTicketInCache: Try to find ticket with cache key: 800:BB1DDE5432D1DBECA778E0DC15AA6852 .
N HmskiFindTicketInCache: Couldn't find ticket in ticket cache.
N I don't need to ask RunningCompatibly to know: I'm >= 46C.
N mySAP: Got the following SSF Params:
N DN =CN=BIX
N EncrAlg=DES-CBC
N Format =PKCS7
N Toolkit =SAPSECULIB
N HashAlg =SHA1
N Profile =/usr/sap/BIX/DVEBMGS20/sec/SAPSYS.pse
N PAB =/usr/sap/BIX/DVEBMGS20/sec/SAPSYS.pse
N Got the codepage 4102.
N Got ticket (head) AjExMDAgAA9wb3J0YWw6ZXBfYWRtaW6IAAdkZWZh. Length = 492.
N MskiValidateTicket returns 0.
N Got content client = 000.
N Got content sysid = EPX .
N Got date 200706042239 from ticket.
N Cur time = 200706042257.
N Computing validity in hours.
N Computing validity in minutes.
N CurTime_t = 1181084220, CreTime_t = 1181083140
N validity: 120, difference: 1080.000.
N *** ERROR => HMskiCheckValidity failed. [ssoxxkrn.c 856]
N dy_signi_ext: ticket expired
Vaib -
BEx Web Analyzer error in Portal
Hi,
I'v integrated the BI 7.0 with Portal 7.0. Both systems (BI and Portal) running on different servers, SSO is configured both ways and RFC communication is configured from ABAP to J2EE. However when i run the BEx Web Analyzer iView under the Business Intelligence role, i get the following error:-
The initial exception that caused the request to fail, was:
No logical system exists for client 800
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: No logical system exists for client 800
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3962)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3399)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.executeFunction(Jco640Proxy.java:255)
Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Jco exception thrown while executing function "RSWR_METADATA_GET" against system "BIXCLNT800"
at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java:49)
... 44 more
Caused by: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: No logical system exists for client 800
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3962)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3399)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.executeFunction(Jco640Proxy.java:255)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Function.executeRfc(Jco640Function.java:73)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java:47)
... 44 more
Any help on this would be greatly appreciated
-VHi Deepu,
All the parameters in the SAP_BW system is correct and i have tested the ITS, WebAS and Connector tests also and everything is green. In the BI diagnostic tool everything was green however in the RSPOR_SETUP the Maintain User Assignment was getting failed, so i removed the UME Master System (Reference system) from the Portal as i'm using the SAP Logon Tickets both ways. So there is no need for the reference system. After that RSPOR_SETUP is okay and in the BI Diagnostic tool one is red (UME Master system).
One thing i have noticed in the RSPOR_SETUP now that it tells me in the second step:-
com.sap.ip.bi Java classes with different versions.
Different ABAP and Java Support packages
ABAP support package 12
Java Support package 11
Vaib
Any clue??
Vaib -
I have Lion 10.7.2 and use Safari 5. When I get online and open a website, then go to a new website Safari will take me right back to the previous site automatically. I have reset Safari and there is not an issue with the interenet access. Went to the Apple Store and the same issue happen. Example: Logged on and went to homedepot.com, after looking at the website, I went to weatherunderground and was taken right back to homedepot.com.
Checked, updated Flash, still the same issue. I am now starting to loose emails. I could be in the middle of typing an email and I get reverted back to the previous website. Does anyone have insite as to what is going on or has Safari 6 fixed some of these bugs that are going on? I can't take much more of getting thrown back through my previous web history. Thanks.Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
BEx Web Application Unknown Error in EP
Hi ,
When opening a BEx report from Portal 7.0, getting the error.How to resolve.
BEx Web Application
Unknown Error
Exception occured while processing the current request; this exception cannot be handled by the application or framework
Log ID: C00099589C2F31A00000000200001A75
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience
Thanks a tonHi Daniel,
We can check the FPN using remote role assignment.
1. Open you EP (Consumer)
2. Go to User Administration
3. In Search Criteria, select Role in the first field, in second field select "system alias of your producer" and put * in last filed
4. Click Go
You should get all the roles of your producer on your consumer. This functionality is used for Remote Role assignment.
This is simplest way to check whether FPN is working fine or not.
Waiting for results
Dbalhara -
Scheduled webi reports fail, why? If I restart BO services they work again
Hello.
I'm having a problem with my scheduled Webi reports and I don't know what is causing it. I have some reports scheduled to run at 8:00 am, and are supposed to be sent to a determined e-mail. Last week it worked well and the reports were sent to their destination successfuly, then this week the same reports didn't reach their destination. I verified in the History option and all of them showed a Failed status. I checked the detail and this is what it shows:
Unexpected exception caught. Reason: [java.lang.NullPointerException: i_statusInfo is null.]
If I try to reschedule these reports or any other report or a new report I get the same error. The only way I can make the schedule option work again for my webi reports is restarting BusinessObjects services.
But I guess this is not the right solution.
What can I do? How can I determine what is causing my scheduled webi reports fail?
What does this java.lang.NullPointerException: i_statusInfo is null message mean?
Is there a way I could track the service that is failing? which BO service is the service that manage the Schedule reports?
Any help is welcome.
Edited by: Erika Atencio on Sep 1, 2010 6:27 PM>
Efstratios Karaivazoglou wrote:
> Which version of BOBJ (incl. SP and FP) are you using?
>
> Regards,
>
> Stratos
BusinessObjects XI 3.1 SP2
FixPack 2.6
Edited by: Erika Atencio on Sep 1, 2010 8:46 PM -
CM repository / BEx Web / document administration
Hi,
I'm testing right now documents funtionality (it's configured with CM repository). We can create comments from the context menu for BEx Web query results elements, however I cannot see any option for removing existing comments/documents or replacing them.. Can you help me finding this funtionality or document administration must be done only from KM content view?
Thank you and kind regards,
KHi Lorcan,
Thank you for your message.
I think Service-ACL Service is activated (by default), svc_acl (acl_jdbc_service) is in use.
Being on the query results view I can create comments, but I cannot see any options to remove or change the created comments. This is not available even for the owner of comments.
Permissions on the CM repository are default Full Control for Everyone.
Something is still missing I guess. I can manage CM the objects within repository from 'Content Administration -> KM Content' view, however I want to enable remove/change options on the BEx Web query results view.
Thank you again.
K -
Dear all,
We are on NetWeaver 2004s BI SP11. I have activated the web templates starting with 0ADHOC from BI content. From BEx Web Analyzer, if I click on send buttion, I see screen consisting four tabs and buttons like save view, export to excel, and export to csv..etc. But when click on those button either an empty popus comes up or nothing happens. Am I missing anything. Please advise.
Thanks
-BharathHello,
Please make sure your configuration is right (execute Support Desk Tool from note 937697 for the check)
Regards, Karol
SAP BI Development -
Bex Web Application Designer issue: portal communication error
hi experts,
I am working with Bex Web Application Designer in BI7. we are using SP9. When i try to use the Web template its giving below error.
The Requested operation could not be performed due to portal communication error.
its message class is RSBOPLAP and message number is 018 and description is Java System error: An unknown error occured During portal communication.
when i double click the below error details given.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
please give solutions to resolve the issue.
regards
vadlamudihi shambhu,
thanks for the reply, yes its related to basis but they are unable to trace it out. is SP9 support Bex Report Designer and Bex WAD??
regards
vadlamudi
Maybe you are looking for
-
How to count number of vowels in the String?
Write a program that calculates the total number of vowels contained in the String" Event Handlers is dedicated to making your event a most memorable one." Please help!
-
Flash 10, Windows 7 and all browsers = crash of the browser HELP
I have Win 7 Ultimate edition, did a clean install last night. I have tried Flash with IE8 32 & 64 versions, Fire Fox and Safari all with similar results. I am trying to complete Flash Based learning lessons for work to give you an idea of what I am
-
How to cancel/delete itunes purchase/download
Okay so I decided to purchase a television show off iTunes, not knowing that my laptop didn't have enough memory. So it didn't finish downloading. Now I want to delete and erase the download. I tried right clicking on it and selecting "delete", but t
-
Starting and Stopping Server from Administration Console without using system ID
Hi, I tried to create another user in the ACL and add it to the Administrators group. When I connect to the admin console using this user I receive error message NoAccessRuntimeException. Can anybody show me how ti configure user to access the consol
-
Outline Agreement - tcode ME31n
Hi , Can anyone plz tell me name of the table which stores data of the agreement created using tcode ME31n