Actual Cumulative Balance

Dear all,
Is it possible through FS10N see the Cumulative Balance only from the beginning of the actual Fiscal Year?
I've notice in fact that Cumulative Balance shows all the items even from privious FY.
thanks in advance
Alberto

Hi,
Then, it won't be 'cumulative'
If you want to summarize the transactions only for this year, look at the balance column and summarize it. Alternatively, use another report (F.01, for example).
Regards,
Eli

Similar Messages

  • Opening and Cumulated Balances of PCA

    Dear BI Gurus,
           I am using two standard (PCA) Data Sources
    <b>1. 0EC_PCA_3 and
    2. 0EC_PCA_4</b>      to Load data into my Custom Cube.I need Cumulated balance and Opening Balance of Actual Line Items for my reporting purpose.
    There is an object 0BALANCE which is not getting populated from the  0EC_PCA_3 Data Source.
    We are able to get only the Cumulated Balances of Periodic Transfer, but unable to get the Balances of all the other Accounts.
    So, can anyone please help me out in getting the Cumulated Balances and Opening Balances of the Account Numbers.
    With regards

    For Delta update
    The extract structure does not contain the BALANCE field. To get the inventory for balance sheet account, 0BALANCE can be filled in BW in den updating rules. For further information, see note 577644.
    Or you can do full load
    http://help.sap.com/saphelp_nw04/helpdata/en/5d/ac7d8082a27b438b026495593821b1/content.htm
    Hope it Helps
    Chetan
    @CP..

  • Different Balance Due and Cumulative Balance

    Hi Experts,
    My Client, SBO 8.8 PL17, are experiencing an issue where the balances differ from the balance due screen and the cumulative balance.
    There are 2 closed invoice showing in the cumulative balance window as well as on Ageing report. These 2 invoices was closed with Credit Notes, both are linked to the target credit, on the actual invoice it shows as closed, the applied transactions clearly states that the doc is closed. In the DB, the INV1 lines for the invoice is also closed.
    For some reason it just doesn't want to pick up that the invoice is linked to the credit.. The credit is not displaying though.
    I have have read through notes but none of them have the same issue as this, they are all related to partial payments, which is not the case here.
    If anyone have any suggestions, please let me know.
    Kind Regards,
    Wynand.

    Hi,
    Kindly check the following query whether the same gives any result :
    select * from OINV t0 inner join JDT1 t1 on t0.transid=t1.transid and t1.account<>t1.shortname
    where t0.docstatus='C' and (t1.BalDueDeb+t1.BalDueCred)<>0
    Also, check the INV6 table and the values displayed therein for the paidtodate and paid fields.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Problem with business partner cumulative balance

    Hi
    I used to used the business partner balance enqury to quickly tell customers what they were due to pay up to the start of the month. I just looked at the cumulative balance of the last transaction of the previous month and that was it. I know I could run an aged credit report but this was quicker and easier. However since upgrade to 2007A the cumulative balance does not give the amount due for a part paid invoice so this does not work any more.
    Question is has anyone writen a fast query or other report that calculates the cumulative balance based on outstanding amount?
    Thanks in advance
    Derek

    Hi!
    Run this in SAP B1 Query Manager
    SELECT     T0.CARDCODE, MIN(T0.CARDNAME) 'Customer Name', SUM(T0.DOCTOTAL - T0.PAIDTODATE) 'Last Balance'
    FROM        DBO.OINV T0
    WHERE     DOCSTATUS = 'O' AND T0.DOCTOTAL - T0.PAIDTODATE > 1 AND T0.CANCELED = 'N' AND DATEPART(month,T0.DOCDUEDATE) < DATEPART(month,getdate()) AND T0.CARDCODE = '[%1]'
    Group By T0.CARDCODE
    UNION ALL
    SELECT     T0.CARDCODE, MIN(T0.CARDNAME) 'Customer Name', -SUM(T0.DOCTOTAL - T0.PAIDTODATE) 'Last Balance'
    FROM        DBO.ORIN T0
    WHERE     DOCSTATUS = 'O' AND T0.DOCTOTAL - T0.PAIDTODATE > 1 AND T0.CANCELED = 'N' AND DATEPART(month,T0.DOCDUEDATE) < DATEPART(month,getdate())  AND T0.CARDCODE = '[%1]'
    Group By T0.CARDCODE
    ORDER BY T0.CARDCODE

  • Difference between cumulative balance and line items total in FS10N

    hi,
    when I am executing FS10n, I observed that the cumulative balance amount is not equal to line items total .  This is due to some amounts in previous years are varying from the line ltem totals in those periods of previous years.
    This is not happening with QA server only Prdn server is facing this problem.  Can anybody provide me a way to solve this..!?
    Regards,
    AJo
    I have checked the master data for the GL and the check box for line item display is selected. It has not been changed for years.
    Edited by: Anil Jonnalagadda on Oct 22, 2008 10:57 AM

    Hi Anil,
    The reason for the differences that you are viewing can be various. As the differences are found in the cummulative balance then it means that the differences might have occurred in previous fiscal years. The first stetp is to find when these differences were originated: You can run report SAPF190 (in se38) for previous fiscal years, and company code in question- This report should show the differences with message "Errors" in the log. If differences are found then you have to creeate a message and send it to SAP for further analysis and corrections.(only SAP experts can do this kind of corrections - component FI-GL-GL-X)
    Also bear in mind that if you did archiving in previous fiscal years then this would not be an error:
    If you already did archiving and secondary index deletion on this accounts with SAPF048I. So this explains why line items balance and GL summary balance differ ! There is no programm error.
    See consulting note 81489 which describes this issue:
    The balance of an account results from the balance of the open items. In
    connection with an archiving that has been carried out, the line item
    display - used with cleared items - must not therefore be interpreted as
    a balance display. For the balance display, there are separate
    correspond to the display balance of the open items from the line item
    display.
    Having archived and deleted secondary indexes ( with SAPF048I )
    for an account you can not use line item drill down as a balance
    display any more for a line item managed account.
    ( as not all line items are existing any more in table BSIS ! )
    The transactions meant to display the binding balances are  FS10N,
    FK10N and FD10N.
    They also give you the line items details, but only of those line
    items not yet deleted ( by SAPF048I ).
    kind regards,
    Oscar Diaz

  • Wrong Cumulative Balance in SBO 2007

    Dear Experts,
    I open up BP Account Balance, and notice the Cumulative Balance was accumulated with the C/D column (which is the document total for that transaction), instead of accumulating it from the Balance Due column which shows unreconciled balance due.
    I have found SAP Note describing this problem as a definition. But logically, I will think that the term BP Account Balance is suppose to mean the balance due for that BP, instead of total  of every transactions related to this BP (Which the system defines it currently). Can anyone explain to me the idea between this system definition.
    And if nothing can be changed in SAP now, is there a work around to find out the "REAL" cumulative balance due for a BP, that is how much "unreconciled" due balance do they have?
    Please help and advice. Much Thanks!
    Warmest Regards,
    Chinho

    Hi,
    As you are aware that the version 2007 had the option of partial reconciliation which was earlier not available in the 2005 version. Therefore, in 2005 Version, the cumulative balance was displayed as balance due field accumulation.
    However, in version 2007A, due to partial reconciliations being available, the balance due does not display the correct balance, hence the cumulative balance displays the total of the C\D fields.
    The same is the logic and the working which is explained in note no. : 1128828 as well.
    Hope it clarifies.
    Kind Regards,
    Jitin
    SAP Business One Product Support

  • Difference in Cumulative balance amount of ERP and BW query report

    Hi all,
    We have a report to display the Cumulative balance amount based on G/L account.
    The issue we are facing here is, when we check a May month's cumulative balance in ERP side ( using Transaction code FAGLB03 by giving G/L account number, Company code and Year as 2010) we are getting 1000 EUR, and the May month's Balance is 300 EUR.
    When we run our Qury report in BW side for the same conditions( same G/L account, Key due date as 31.05.2010 and same Company code) we are getting the Cumulative Balance as only 900 EUR. we are missing some 100 EUR in our report for our Cumulative balance. But,When I check the Cube on which our Query report runs, I could get the May month's balance as 300 EUR.
    Kindly help me to rectify this issue.
    Thanks.
    Regards,
    Jayaprakash J

    Hi,
    Check is there any restrictions are there . the data must be displayes if the data is there in infocube.
    Regards
    sivaraju

  • Difference in Cumulative balance of ERP and BW

    Hi Experts,
    We have a report to display the Cumulative balance amount based on G/L account.
    The issue we are facing here is, when we check a May month's cumulative balance in ERP side ( using Transaction code FAGLB03 by giving G/L account number, Company code and Year as 2010) we are getting 1000 EUR, and the May month's Balance is 300 EUR.
    When we run our Query report in BW side for the same conditions( same G/L account, Key due date as 31.05.2010 and same Company code) we are getting the Cumulative Balance as only 900 EUR. we are missing some 100 EUR in our report for our Cumulative balance. But,When I check the Cube on which our Query report runs, I could get the May month's balance as 300 EUR.
    Kindly help me to rectify this issue.
    Thanks.
    Regards,
    Jayaprakash J

    The cumulative balance for the GL should be stored in the key figure 0BALANCE in BW
    What is the amount when you do a list cube on this KF ?
    If you don't have the same as in FI-GL, there are several possibilities :
    1) there's a mistake in the extraction flow (transformation)
    2) you didn't update the BW infocube with the latest data

  • Difference in SC and FC cumulative balance

    Hi All,
    After running the conversion difference, there is still a difference between the SC and LC cumulative balance.
    For ex. LC = 0.33 and the SC = 0 .00 (cumulative balance) Is this correct? I can see a value of 0.05 in SC C/D but in cumulative
    balance its hows 0.
    Please let me know.
    Thanks,
    Joseph

    Issue resolved.

  • Cumulative balance - which table?

    Hi there, I am writing a fairly simple query from JDT1, but i can't find the cumulative balance column in either ODJT or JDT1. is it in a different table or is there a formula i should write?
    thanks, my example query is below:
    SELECT T1.[TransId], T1.[Account],  T1.[CreatedBy], T1.[ContraAct], T1.[LineMemo],  T1.[Credit], T1.[Debit], T1.[DebCred], FROM [dbo].[JDT1]  T1 INNER JOIN OJDT T2 ON T1.TransId = T2.TransId WHERE T1.[Account]  = '[%0]' and  T1.[RefDate] between '[%1]' and '[%2]'

    Hello Groovy,
    You can use the word SUM to sum the different values.
    E.g. this sums the values of both credit and debit side and it was used in the query generator:
    SELECT  sum(T0.[Debit]) + sum(T0.[Credit]) FROM JDT1 T0  INNER JOIN OJDT T1 ON T0.TransId = T1.TransId WHERE T1.[TransId]  = '95' group by t1.transid
    or if you want the total of the column you can use:
    select SUM (debit) from jdt1 where transid = 'XXX'
    and it will sum the total of debit for that transid.
    Please, let me know if the information helped you. If not, can you please give us more information about what you need?
    Thank you.
    Marcella Rivi
    SAP Business One Forums Team

  • Cumulative balance (FC) shows **** in GL report by Account

    Hi,
    In the General Ledger report by Account, the cumulative balance (FC) column shows **** when there
    are multiple foreign currency transactions being posted to the GL account.
    Understand that this is a standard system behaviour but is there a way or any workaround to find out how much balance for each foreign currency in the account?
    Besides Export to MS Excel from GL report, please advise any other proposed  solution.
    Thank you in advance.
    Best regards,
    Priscilla

    Hi Thanga Raj.K,
    Thank you for your response and the proposed solution.
    The GL report i am referring to is by Accounts and NOT by Business Partners. Anyway, I agreed with you to write query report to cater for the report limitation.
    Thanks
    Priscilla

  • Report with cumulative balance

    Hi!
    There is a FI report for vendor ledger based on multiple profit center where a column is there for cumulative balance in the output.
    Now when the user makes a subtotal on profit center the output generates based on multiple profit center but in that case the cumulative balance is misarranged and the output appears to be wrong.
    what should I do to generate correct cumulative balance based on profit center.
    thanx
    Amit

    Dear Feroz Dosani.,
    Since your account has been set up as FC, only FC balance can be directly controlled.  The difference between LC Cumulative Balance and the rate conversion come out of the fact: Exchange Rates are changed everyday,  all conversions would be done in posting day rate.  You have to run Exchange rate difference from time to time to reconcile LC.
    Thanks,
    Gordon

  • Cumulative balances from Normal Balances

    Hi experts,
    We have a report requirement as,
    To show vendor "Cumulative" balances fiscal period wise and business area wise. But in the data source
    0fi_ap_7 we have only Cumulative balances Company code wise. There is no business area.
    But suppose if we use 0fi_ap_4, we have business area but we get only normal balances fiscal period wise.
    How to get the cumulative balances from normal balances ?
    Regards,
    Swaroop.

    hello
    chk out these threads..may be useful.
    Accounts receivable on Business Area level
    Re: Getting Cumulative Balances from Cube 0FI_AR_3
    business area
    Regards,
    Dhanya

  • Variable for ReportSum of Cumulative Balance Due in the General Ledger

    Hello ,
    my Customer need in the General Ledger Report only the sum of Balnce Due, Cumulative Balance Due .
    Ok, for all i find a varible for Sum of the report. But not for the Cumulative Balance Due.
    In the Repetitive Area 0 is the variable 186 setting, thats ok.
    But in the Page Footer when i set formula  > ReportSum ("Field_with_Variable_186") the sum is the sum about all
    the row and not the Summe of all the Repetitve Area´s
    Can you help me, or what can we do?
    Thank
    Daniela

    Hello Gordon,
    that is my problem, the variable 186 is for the row, not the end of periode balance for cumulative balance due!
    For example for the end of periode of cumulative balance, i find the variable 107 and then the report sum is correct.
    The same i need for the cumulative due of all the Repetitive Area Folder in the Page or End of report folder.
    Thank´s
    Daniela

  • Report "General Ledger from the Document File" - Cumulative balance

    Hi!
    When I start the report "General Ledger from the Document File" (transaction S_ALR_87100205), I get a list of documents with no obvious default sort order criteria (I can see at glance that document numbers and posting dates are not sort criteria). This makes the cumulative balance column completely useles.
    Since the cumulative balance is carried from one row to another, standard sorting functionality for the already produced list makes no sense.
    There should be a way to affect the sort order in program <b>before</b> cumulative balance calculation, or at least to find it out.
    Is there a way to acomplish this?
    Thanks!
    Regards,
    Igor

    In the output control section there is a button called configure. Select a variant. Select configure. Save the sort order and report definition the way you want it. Name a new variant. Now go back and run the report with your variant.
    pls assign points if helpful as a way to say thanks.

Maybe you are looking for