AD connector Auto Save creating issue

Hi everyone,
i have integrated my AD with OIM 9.1 on jboss. All is working fine. I am able to provision and reconcile the user. But As soon as i enable the autosave option under process definition and then assign the AD resource to any user , create user task getting rejected with exception "java.lang.classCastException. Java.lang.String cannot cast to Java.lang.boolean thrown by adapter "ADCS Create User". While if i unchecked the "Auto Save" option under process definition same is working fine. After unchecking the auto save option i am not putting any value. All the values are pre-populated automatically using pre-pop adapters so any possibility of submitted data (to ADCS Create User) mismatch is not the reason. I have tried it 2 instances and both are showing the same behaviour :(

You need to provide default values for your checkboxes with a 0 or a 1.
-Kevin

Similar Messages

Auto Save folder not being created with new project

Just recently I've noticed that when I start a new project there is no auto save folder being created. I have all preferences the same (auto save every 10 min with a max of 50 and save next to project files). I have no idea why this started or what I can do to fix it.

So it seems to be working now. I went back through other projects that have been open for some time and the most recent auto save file I could find for any of them was from Oct. 8th. So auto save hasn't been working at all. What I did was go into preferences and change the interval a little and the frequency from where I had had it since intial set up. That seemed to have told it to turn it back on for some reason. It's really weird. I guess I'll just keep an eye on it, but people may want to check there folders just in case the same issue is happening. I didn't realize it until today and it's been happening for a couple of weeks apparently.

How do I auto save all newly created contacts to a pre-determined group in Maverick? Could do this on iTunes, can't do it on iCloud...

Hi,
Before upgrading to Maverick, I used to sync all my contacts via iTunes.
iTunes used to have an option to "Add contacts created outside of groups on this iPhone to: (drop-down)".
I had created a group called ' RECENTLY ADDED ', so that every time I saved a new number whilst meeting people / networking, etc, it would auto-save to that group. I would then sync via iTunes, and voila- all my new contacts would be in there.
As a marketer, I allocate my contacts into various complicated groups... so from there, I would proceed to move each contact into their relevant group, and then 'delete' from group (not delete completely). I would repeat this step until all contacts were moved out, leaving an empty 'recently added' group.
The next time i was out networking/saving new numbers, the process would repeat...
Now that I have upraded to Maverick and using iCloud syncing, I cannot find this feature.
The previous method I used worked brilliantly, and I do not always have time to add notes, etc (for a smart group) when saving new numbers.
I'm struggling to find a solution now that I'm using the iCloud syncing service...
Any suggestions to make it easy??

If the information is in iTunes on the computer you have synced with in the past another sync, being sure you select the items you want on the iphone, should copy those things back to the iPhone.

Flash CS5.5 Auto Save Issues

Alright, I've been having this annoying issue with flash. Flash auto saves my project every 10 minutes, but, I would rather have flash save every thirty minutes. This can be very aggravating, because, when every I return to use flash It is saving. When I am in a rhythm working on a project flash interrupts me to autosave.
Autosave is great in that It has saved me having to redo work, but, I would rather choose to save when I am ready.
I tried to change the auto-recovery setting to a different amount of time. FlashPreferences>General>Auto-Recovery
This does not work. Flash will continue to save every 10 min.
Any thoughts or solutions would be appreciated.
Thanks in advance!
-Pat
Bike Lust Comics
http://www.BikeLustComics.com

Thanks Sukhibir! I found the setting and set it to 30 min. I can stop pulling my hair out now!
At first, I was a little confused about where to find the wrench so I made some screenshots to help people find this:
Thanks again!
-Pat
Bike Lust Comics
http://www.BikeLustComics.com

[OIM] Error in Direct Provisioning (with auto save form) - GTC DB App Table

Hi,
I am getting an error when setting up direct provision of a GTC DB App Conn using OIM access policy (and group membership) or through manual provisioning with prepopulate and auto save form.
Manual provisioning with prepopulate ONLY (not with auto save form) WORKS!!!
Some information about my OIM config:
- Prepopulate adapters are set up on both forms (parent and child)
- "Auto prepopulate" and "Auto save form" are set up at Process Definition
- For direct provisioning, I have created an access policy with an associated group which has a membership rule
What it is working:
- Provisioning manually, using prepopulate adapters only, not auto save form. Both tables are updated properly
- All *3 tasks are called and finished with status=Completed*: "System Validation", "Create User" and "Child Table UD_<connector child table name>_US row Inserted"
Testing direct provisioning:
- I have tested adding the resource manually with prepopulate and autosave form configured, and also through access policy/group membership. The error is the same on both tests
- The resource is displayed as provisioned and it is created an entry in the parent table of the resource, but not on child table
- I also observed that only: "System Validation" and "Create User" tasks were executed (status=Completed). But it is missing the task "Child Table UD_<connector child table name>_US row Inserted"
- The error log info displays only an error regarding to UGP table (Groups info) but I am not sure if that is the cause of entry creation on child table.
It seems the SQL stmt tries to get ugp_name (group name) using ugp_key but that has null value.
"SELECT ugp_name FROM ugp WHERE ugp_key=java.sql.SQLSyntaxErrorException: ORA-00936: missing expression"
Note: When testing manually (without auto save form), I got "SELECT ugp_name FROM ugp WHERE ugp_key=1" which it is the same SQL stmt but the value is provided.
My guess:
- It seems that error is aborting the whole execution process so "Child Table UD_<connector child table name>_US row Inserted" task does not run, even though previous tasks are finished with the status=Completed. Consequently, the entry is not created on child table.
Please, any guess or help would be very helpful. In case nothing works, I guess I will have to create and customize a "Update child Form" task as an workaround which would be called after "Create User" task.
Regards,
Hugo
My environment:
- Windows 2003, WebLogic 10.3.0.0, OIM 9.1.0.2 BL4, Oracle 10g, Java 1.6, DB App Table Connector 9.1.0.2 (from October 2009)
- Target Resource: Parent and Child Table (Oracle 10g - the same OIM DB)

An update:
I solved that error about "ORA-00936: missing expression" applying OIM 9.1.0.2 BP05. That was not impacting my issue regarding direct provisioning with auto save form and child form.
So please if anyone can confirm:
- Can I set up prepopulate adapters on child forms AND also use "auto save form" on GTC DB App Table connector?
If not, any suggestion?
Regards
Hugo

CS6 Auto-Save: 1 step forward, 1 step back

I have done a little testing with the auto-save, and there is some progress with CS6 - especially in the area where earlier versions would stop playback or scrubbing to fire off an auto-save.
It looks like the auto-save does not stop playback or scrubbing on the timeline anymore. It will stop you from other operations such as moving an audio slider or other non-critical mouse clicks. I tested with 1 minute intervals, and it appears that it won't auto-save during playback or scrubbing in the background, and will wait until the next interval after playback has stopped until it saves. (Instead of taking the very next possible moment after playback has stopped to makeup for the save) This seems like it could create the possibility that if you are playing back or scrubbing during multiple interval moments, you could have a long period where there are no auto-saves - especially if you set the interval to a high number. Like I said, I only tested with a 1 minute interval, so maybe this functions differently if you save every 10 or 20 minutes. Maybe then it will do an auto-save right after playback has stopped if it has been awhile.
The step back is that if you hide PPro, (I'm on a Mac, btw) instead of just bouncing the dock icon during an auto-save like previous versions, it will actually bring PPro to the front and block out/cancel anything else you are doing on your machine. How annoying! I can't figure out the reason to have it function like this. If it is simply hidden behind other windows, it does not do this, instead only brings to the front the small auto-save progress bar - It only happens if you hide the appplication. For example, if you are moving back and forth between PPro and AE, you could be working away on a comp in AE and suddenly PPro jumps to the foreground to let you know it did an auto-save. Since I have 2 monitors, I like to hide apps that I'm not working in to hide pallettes and other windows so I can have my desktop back. Seems like the solution for now is to not hide PPro ever and to do a proper save more often to avoid the issue of potential long periods of no auto-saves. (And submit a bug report?)
Anyways, long post for a potential trivial thing, but for those who care about this, it is a change. Anyone else experiencing this?

Jim,
Exactly, and that is what the "1 step forward" is with CS6. It drove me crazy when Auto-Save would interrupt playback. I was suggesting that it would be a better option that if you are playing back during an auto-save interval, it should take the very next opportunity to fire off a save, like maybe after hitting stop when there is a moment of downtime. However - in my testing - it looks like it skips that interval completely and waits for the next one. So, if you have it set to save every 10 minutes, but are playing back your timeline during each of those 10 minute intervals, it will never auto-save even if there are large stretches of time in between when you are doing nothing. It seems like it could be more intellegent about when it saves, and do it quieter in the background.

FCPX undo / auto save bugs + RAM Hog - Possible Fix?

Hi there FCPX users,
I have a 8-core 2010 Mac Pro with 16GB Ram and the stock GPU running Lion 10.7.2
I have been using FCPX since day dot, and have been overall very pleased with its super fast work flow and realtime capabilities.
I have completed over 100 3-4min edits with average project size of 50GB, and a bunch of wedding edits with approx 150-200GB project sizes. The issues I had with 10.0.0 - 10.0.1 were mainly FCPX quitting unexpectedly.
And now on 10.0.2 I have expereinced the well known auto save / greyed out undo bug. I have gone through all the steps via apple care which included:
Trashing the Prefs, repair permissions, check drive space / correct format, new user account and clean install of lion / Final Cut X.
I am still experiencing this issue. So yesterday I purchased another 16GB Ram totaling now to 32GB Ram, and I monitor the RAM usage via "Free Memory".
I Noticed that if my RAM is running low, I "free Memory" without quitting FCPX and continue to work as normal, and so far I have not yet experienced the issue again.
Dont know if this is a temporary fix, but it has worked for an hour long edit (approx 6-7 hrs without restaeting FCPX).
Also, I have noticed FCPX will eat up 16-20GB RAM quite easliy.
Not sure if this problem is related to RAM...
My 2 cents.

You have to really be conscious when you start a new project and how and where you manage your footage.
No one has complained more than I have about FCPX's quirky behaviors and it can be frustrating. I have worked with FCPX since day one, even tried to get a refund but couldn't. After using it for a while now, it is very easy to get used to how fast some elements are in editing and reviewing a lot a footage. But several things you have to make sure of that will keep the rendering speed up and less crashing happening.
First make sure that you can see how much space you have on your drives by right clicking in the main window of you screen and make the necessary clicks form the drop down menu. Make sure any drives you have been doing projects with lately are hooked up and do a secure empty trash. Its cool to see how much space you regain. 2) make sure that FCPX, Motion and Compressor (if you have those are installed on your boot drive).
3) Create a FCPX Projects folder on an external (FW800) with at least 75% of its drive space available if you do not have secondary drive installed in your computer. (Its very important to note that any drive you use for any aspect of editing should never be more 75% full, especially your boot drive.) This is where FCPX will log all of its operating files for all of your projects.
4) Either copy all of the other FCPX files from your main hard drive and paste then into the new folder you created. Then delete all of those files, as well as any Motion files too! (Do the same as you did for FCPX in the previous step)
5) If you need to move all of your music files to another drive as well. If its iTunes, you will have to tell iTunes where to look for the new files and it will populate accordingly. This will free up a tremendous amount of space. Make sure to delete them form the main drive.
6) Remove any junk programs form the boot drive (main) or move them to another drive if possible.
7) Now do another secure empty trash and watch your drive space return.
8) Now open up FCPX and make sure you only create projects on your new drive by clicking on that drive in the project window. Any older projects you can simply pull them to the other drive and you will be prompted on how to duplicate that project and all its files to that drive. Delete the other ones.
9) Only capture footage to you external drives. Save it there until you need it.
10) Create all new projects on the secondary drive and pull any footage you are working with on that drive as well. By keeping it all off the Boot drive FCPX will run much smoother and faster, especially if you have at least 16g of Ram, which I recommend.
So to re-cap:
1. Keep your boot drive lean. Delete anything you can move to another drive. Do not set up events and or projects to it...never!!!
2 Use you secondary drive for your project files and the video you are working with in your events.
3. Store raw footage on a FW800 drive ready to move to your secondary drive.
4. Use secure empty trash after all editing sessions when you are certain of your trash contents.
Doing these things have greatly increased much more consistently faster render times and much fewer crashes.
iMac 27 - 3.5gh - 16GB Ram - Quad i7 - 250SSD/1TBesata - External FW800 Drives
Good Luck

Auto save didnt

I guess I dont understand "autosave" I was editing a very important job appication in preview it was a unlocked pdf. I deperatly wanted to save as I made changes to it. But i know I 2don't have to right? shouldn't the last version be saved. To make an already long story short. Lion locked up again. I had to force quit and the work I would have saved was gone. Is there some place to look? I tried time machine with no luck. Also when using word for mac 2011 it does not seem to auto save, does it. Lion is so slow and I am having to force quit and restart more than I have come to expect from apple. I think that they should return to features and return to rock solid OSX that made me a convert back in 2002.

Old ways wrote:
I deperatly wanted to save as I made changes to it. But i know I 2don't have to right? shouldn't the last version be saved.
Yes, it should.
Lion locked up again. I had to force quit and the work I would have saved was gone.
If the system freezes, it can't auto save. A freeze is a freeze.
Old ways wrote:
Lion is so slow and I am having to force quit and restart more than I have come to expect from apple.
Here is your real problem. Something is snarky with your system. Mine is rock solid, fast and have never frozen.
You need to find the cause.
There are some simple troubleshooting steps you can take.
Be sure you drive is not overly full. Rule of thumb would be over 85%.
(First, be sure you have a good backup, or create one now.)
Create a new User go to System Preferences > Users & Groups > "+" (make it an admin acct) and test the apps in this new account, if they work the problem is isolated to your User and not systemwide.
If the issue is limited to your user account try starting up in Safe Mode (It will take more time to startup because it runs a directory check.)
If your apps functions correctly that way, go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test.
If the issue is systemwide then, you may be able to repair by booting cmd-r to your
Recovery Volume and re-installing Lion. This will be an "install in place" and shouldn't effect your data and settings.
if none of this helps make a clone of your system and then re-format your HDD and do a clean install, migrating back only your own data.

Auto save not working

I am running AE 13.1.1.3 and it is not auto-saving. I tried setting a target folder and using the 'next to project' setting.
No files are being created and I have lost a large amount of work as a result of this as my computer keeps crashing due to other Adobe software related issues.
Even if I don't save manually and make changes, no auto-saves are created.
Is this a bug with the new version of AE?

Hi Mike,
What version of Premiere Pro do you have installed? There were a few changes that should help in build 8.0.1.
It sounds like your familiar but just in case I'll explain it here for others. Autosave will not trigger exactly at the preference value, we look at a window of inactivity around the value to try not to be annoying. Example, if it is set to 5 minutes it will aim at firing between 4:30 and 5:30. Of course if you are doing something like playing during that time that will block it.
Keep in mind if you are not doing actions that dirty the project file (i.e. trim media, adding effects) there will be no autosaves.
Hope this info is useful.
If you're still seeing issues outside of this scope can you please provide more details about your system configuration?
Thanks,
Peter Garaway
Adobe
Premiere Pro

Auto save problem

Premiere 5.5
I have got my auto save set to 50 versions at 5 min intervals and I find when the auto save number reaches 50 the earlier ones are not overwritten. The program still comes up with 'saving project' every 5 mins but I can't find where it is saving them (if at all). I have only just noticed this issue (after an untimely crash). A couple of months a go I did a reinstall of Win 7 and 5.5 production premimum, I did not have this problem when I only had Premiere 5.5 installed. Any thoughts..
RMK

Thanks, you were right, the time and date shown on my windows page was the date created not the date modified so it looked like it wasn't saving as the created date did not change.
RMK

No auto-save

Hello... Would anyone know why my auto-save function does not perform (CS6)? I have it checked in preferences for every fifteen minutes, 6 versions. No folder is created, and no auto-save window pops up while editing.... ever. I've tried changing the interval times & no. of versions. I've built several "dummy" projects, still no auto-save folders are being created. It would be great not having to hit control-s after every edit. Any ideas? Thanks!

IIRC, AutoSave is invoked, after the first time that the Project is Saved (File>Save, or Ctrl-S), and should then function, per your Preferences.
I do seem to recall an older post, regarding AutoSaves not functioning, but thought that was for one of the updates to CS 4? Will see if I can locate that, in case there is something useful for you in it.
Good luck,
Hunt
[Edit] OK, here it is, but there is not much in it, other than a link to a similar issue in CS6: http://forums.adobe.com/message/4708480#4708480

Auto-save in Logic 8

Hey Guys
I've been trying to find an option for auto-save in Logic (and to set how often it does this)... but I can't find anything...
Does it just do auto-save in the background? Or is there no auto-save feature?
It's easy to forget to keep saving in a long session and would be nice to know Logic does it for you!!
Cheers
Mike

I'm sure that Logic will never need auto save.
the reason is: Logic have a .crash save function...
it works great... (if you don't use 3rd party plugs with false Audio Units validation Pass.
I'm a Logic user from the Notator version...
Auto save is dangerous...
the only usefull thing should a Fix with save before Crashing happen
Auto save is not "intelligent solution"
*Logic 9 should be comes with an intelligent way to save function that works ONLY WHEN AND IF NEEDED*
I'm sure that Logic 8.1 will solve the .crash issue with 3rf party plugs that are intentionally developed with only AU version bugs.
this is another of the "milion" fermusic ideas about sh*t auto save dangerous and *really obsolete* function
No Auto save... *vote for an intelligent way to automatic save function*
(vote for fermusic )
Thanks... expacially focused to Bee Jay and Erik

I have a site I do business with. They do not authorize passwords unless a dealer. I do no have on an auto save function, as I want to type my passwords in ea

I have a site I do business with. They do not authorize passwords unless you are a dealer. I do not have passwords on an auto save function, as I want to type my passwords in each time for security. My password for this site will only work a short WHILE, AND THEN it will not be recognized by the site and I cannot get in.
Then I must contact the company to reset or clear it manually on their end so it can be reset. They always give me the SAME SETUP PASSWORD to use. I use it, then I RESET PASSWORD on my end. The computer seems to remember my user NAME AT least on my computer as it comes up once I start typing the username in. They SAY IT is a settings issue on my end. I do not have this problem on any other site even THOSE WITH higher SECURITY. I need to FIX the issue OR may LOSE ACCESS To the site as is very aggravating for them and they say other have had the problem but usually with chrome but never constantly.I am not that computer literate ,but my husband is an IT Security professor and textbook writer but says doesn't really know Firefox. I do not really want to store passwords on computer as have been hacked several times. He and I do not understand some of the terms mentioned. since it is not a problem with other sites it should be fixable. Please me help using terms I or my husband can understand without having to give Firefox all my passwords. I would be happy to set up something different just for this one site if I need to but need easy instructions. Have cleared the cookies before but it still happens. What setting do I need to change or set to fix this? the other questions that come up seem very different and do not apply. FF 22 now but happened w other FF versions.

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

Auto save is not working

There is some problem after upgrade to Lion, Auto save version is not working in Iwork and anyone can fix it please advised. T.T

I have experienced projects not being auto save back-uped, and linked that to file structure problems (like I moved the project from the folder where it originally was created, or I changed the folders name where the Pr project was residing after starting it. I think that these things can lead the Auto-Save to get confused sometimes. This can also happen in Ae as well.
I have gotten used to making a duplicate of the project every day or at junctures of major change in the finder. The Mac finder duplicates the project file with the added word "copy" so I know that it isn't the original project file. I then add the date and time to the end of the file name _yymmdd_hh and send a copy to another drive.
It's too bad that there is no option in Pr to have it save the Auto-Saves to different drive than where the original is.
I also use a droplet created with a Mac renaming utility called "Name Mangler". Here is the macro for the advanced area of the re-namer in case anyone is interested.
[concatenate
<name>,
"_", [modified "%y%m%d_%H"],".", <extension>
I just drop the project file onto the droplet and it gets appended with its modification date.

Auto Save and Versions

Where can I control Auto Save and Versions? I can't find it in System Settings.
Can I control it by terminal commands?
On http://www.apple.com/macosx/what-is/ Apple claims:
Versions creates a new version of a document each time you open it and every hour while you’re working.
While here http://www.apple.com/macosx/whats-new/auto-save.html Apple claims:
Forget about manual saving and forge ahead with confidence. Auto Save in OS X Lion automatically saves your work, while you work, during pauses and every five minutes. And Lion saves changes in the background so you're never interrupted with progress bars.
So I wonder every five minutes or every hour? Would be nice to make sure on each Mac itself whether it auto-saves every five minutes or every hour and to actually allow its user o set the frequency.

It does both. It saves your work in the current version every 5 minutes. Every hour, it creates a new version of the document.
I haven't searched for any version settings, yet.

AD connector Auto Save creating issue

Similar Messages

Maybe you are looking for