Add-on registration steps

Hi all,
I just created the .ard file for my project using AddOnRegDataGen.exe, it uses an xml file that holds an UDF, the SAPBouiCOM and SAPBobsCOM dll files.
Which files should be delivered to customer to be able to successfully install the add-on ?
Are only needed the .exe and .ard files ?
Also that files depending from the sap b1 version and/or patch level ?
I'm posting this questions because when I run the add-on in other sap b1 patch level it causes the block of add-on!
can someone help me in this?
thanks in advance.
best regards
Andrea

Hi Andrea,
If you're using XML forms (.srf files), then yes. All resources must be available to the client. You can tell Visual Studio to copy this files automatically when you run/compile the application. Just open the Solution Explorer (Menu ViewSolution Explorer) and the Properties Window (Menu ViewProperties Window). In the Solution Explorer select the resource file you want copied (.srf file, image, etc). Then, in the Properties Window, set the "Copy to Output Directory" to "Copy if newer").
Run your application again and check in bin folder for the resource files.
Regards,
Vítor Vieira

Similar Messages

Add or edit step(s) dynamically in a sequence

I am trying to add or edit step(s) dynamically in a sequence, based on the response from the user to a ui. If I can not do this in the Test Stand language, how would I do it using a LabVIEW vi and programmatically put that into a Test Stand sequence and run that sequence?
cinsight

The easiest way to edit the currently loaded SequenceFile is to use the existing Operator Interfaces that are shipped with TestStand. The OI performs operations using Command objects. It is also possible to implement your own Custom Commands. Custom Commands make it possible to perform operations such as dynamic sequence editing. The tutorial Adding Custom Commands to the LabVIEW Operator Interface covers Custom Commands in detail. Note: This requires that you have a TestStand development license in order to modify or save Sequence Files.
Let me know if you have any specific questions.
Regards,
Tyler Tigue
Applications Engineer
National Instruments

SM37 - Add a new step job to an existing Job

I have created step job in SM37, Is there any way to add a new step job to this existing job.?

Hi,
You can do thru SM37 itself only...
Selct job name>change mode>Step >create step..
this is the way you can add as many steps for that job..
Kuber

How to add a delay step

Hi,
we have come across a issue in work flow. And we have very little idea on work flow.
Can any one please let me know how to add a delay step behind existing step X.
Also let me know how to do below options to perform this operation like
1. Like in ABAP delay for few seconds
2. Or simply making use of desired start time logic.
Thanks in advance.
PRaneeth

Delay?
You mean that you want to stop the execution of the workflow for a specific period, right?
Like in ABAP delay for few seconds
This can be handled by using a WAIT STEP of the workflow, I meanthe use of this wait step is , in brief, if at all you want to stop the execution of the workflow until a specific Event is raisedthe workflow execution stops and as soon as the specified event is raised then the remaining part of the workflow is executed.

NI 5122 add processing filter step truncate the initial curve

Hello fellows,
I'm trying to add Waveform Processing Step to my NI5122 channel 0 acqusition and I don't understand why my resulting waveform have some point that are truncated from original waveform.
In attached file the Vi that I run to adquire my waveform on channel 0. I apply the Butterworth IIR Filter directly to the waveform that is adquired on channel 0 and I don't have the same problem as when I tried to apply the filter directly through the Add Waveform Processing step VI.
Is there any step I am missing to proceed correctly the filter on the digitizer ?
Best regards,
Armindo PINTO
Attachments:
niScope Butterworth filter.vi ‏272 KB

Hello NewCLAD,
Thank you for posting on the National Instruments' forum.
I think the difference between both your Waveform is how you read your sample.
On one hand you use the multi-read wdt VI and in the other hand you use Fetch Measurement VI. If you use indicator, you can see that the number of samples is different between them.
If you want more inforamtion you can use these links:
- http://digital.ni.com/public.nsf/allkb/75A7E5F36CEB679F862576420055C8F0?OpenDocument
- http://digital.ni.com/public.nsf/allkb/8403533DB4AB37C7862572130014056E?OpenDocument
Kind regards.
Pierre_D
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
LabVIEW Tour
Journées Techniques dans 10 villes en France, du 4 au 20 novembre 2014

How to add a Wait Step in BPM for the synchronous send step

Hi,
we have a scenario where in one of the step in BPM is a synchronous step which sends data to ECC system and gets the Respose .
The Requirement is that we need to add a wait for the Synchronous step in BPM as the data sent to RFC(ECC) need to get comitted before sendng the response which requires some wait time.
Currently we are getting the Response to PI from ECC where it was reported as the response is not correct.
Is this possible to add wait

> Is this possible to add wait
No, this does not make any sense.
The BPM waits for the response anyway.
You could change the scenario to an asynchonous pair of messages.
But in my opinion the error is inside the ECC, because the response from ECC is not correct.

Add-On Registration, Java

Hi all,
I'm having difficulties to understand how to register an Add-On.
The only help I could found ("SAP Business One SDK Add-On Installation and Registration") is not enough to make me understand how I can add a menu in the B1, and how I can add a Java class.
I read about Lutz's project, like everybody I think, I support this initiative. I hope I'll be able to help soon.
Thanks for your help
Sebastien

I just write this post because I have the answer.
It is not possible to create JAVA form or Add-On to be incorporated in Business One.
The class which comes with the SDK just allows to have access to the data. There is no class to access to the UI API
If you want to develop forms in Java, you will have to open them on a separate screen, without link to SBO Client, even if you can share the same database.
Sebastien

Add an IVI Step Type

I would like to use an iviRFSigGen with teststand (Currently using ver 2.0). Can I add a step type to do this or is there a step type already available to do this.

Hi,
We have a beta version of the custom step "IviRfSigGen".
Unfortunately, it was not tested so well, it seems like starting exsample for you.
Please see the attached zip. file and Your comments and suggestions are very welcomed.
Br,Sergei
"Only a life lived in the service to others is worth living..." - Albert Einstein
Attachments:
IviRFGen.zip ‏444 KB

Add limits to step settings via TestStand API from LabVIEW

Dear LabVIEW and TestStand Community!
I'm trying to add FileGlobal Variables as limits to TestStand step NumericLimit programmatically, via LabVIEW, via TS API. I attach screenshot of the code, which I use (part of it - the module, which only sets values to low and high limit of the step), and also I attach, what I manage to get.
In TS, when I open sequence file, after running of the code, I can see in the description line of the test, that it accepted limits, which I set from LV - you can see it from the screenshot, it is marked with yellow. But in the Tab "Limits", there are still default numeric values, not FileGlobal Variables.
Could anyone explain, what doest it mean, and how to set up them correctly?
Thanks a lot in advance!
Solved!
Go to Solution.
Attachments:
Limits.PNG ‏33 KB
Add Limits.PNG ‏15 KB

It's kind of sequence generator what I'm doing now...
Thank you very much for fast reply, but when I setup "UsexxxExpr" to true, it doesn't change the situation... Could you, please, check my attachment? Maybe, some mistake in syntax?
Attachments:
Add Limits.PNG ‏23 KB

Add 2nd sharpening step which acts upon the results of the first step

Consider adding a 2nd sharpening step which acts upon the results of the first step. For artsy reasons, you might want normal sharpening, then enhance edges as a second step. For lower quality images, two sharpenings can be an effective form of noise reduction. For whatever reason I often run two sharpening steps in a row in CS5, where the second step would look bad without the first.

Scott T Martin wrote:
Lightroom already has 3 levels of sharpening: "capture" sharpening in the develop module (detail panel), "creative" sharpening with the localized adjustment brush and "print" sharpening in the print module.
Is there a problem with the current implementation that you think could be improved?
A good example is one I had yesterday: a raw camera file of a water action shot where it is desirable to have two sets of sharpen settings, --one finer radius (.8 to 1.2) for the normal sharpening of the shot, and then another step which is a coarse one (about 2.1 + separate detail/masking setting) to enhance water droplets. The second masking only applies to the second step, thereby preserving the desirable sharpened detail of the first step. This allows the water droplets to be targeted in a narrow bandwidth, and made spherical and sparkely, giving the photo depth. The same could apply to coarse animal hair, ice crystals, etc. The reason I want the sharpen steps in "capture" mode is so they can be copied separately and pasted to multiple photos.
The only way to do this now is to use CS5 to sharpen the water droplets after the normal sharpen which then severs the chain of Lightroom history. It's much harder to reverse a previous change once Photoshop is resorted to. And subsequent changes do not behave the same on a non-raw image.
What type of image content are you using that the current set of tools isn't satisfactory? (ie: are you talking about camera RAW files or film scans that were shot out of focus? More details would help.)
Actually both. Other uses I've had for a second sharpening step is to target, and enhance edges on lower quality scanned images. However I have less of a problem fixing these images in Photoshop because: they are usually one-of-a-kind, and they have no raw data to work with. I just make sure the scan is as accurate as possible and that becomes the starting point.
The brush sharpen is handy but not for the above purpose requiring a different radius. And of course copy/pasting brush strokes does not work on action photos.
I hope this helps to clarify my request

How to Add Non SAP steps in test package

Hi Experts,
As our Client requirement is to load end to end test scripts/packages in solution manager. which includes non sap systems where it does not have URL and that legecy system contains 4 to 5 legecy steps(i.e as a place holder as text) along with 5 to 6 sap steps.
in solution manager test package should show all sap and legecy steps(i.e as a place holder as text) which is total 10 to 11 steps.
Can any one guide me on this please.
Regards,
Naveen Gunda

Hello Naveen,
the approach for non-SAP steps is more or less the same like for SAP steps using SOLAR02.
The only difference in your case (without URL) is that you can't assign a test object to the related test document and so navigation to the system under test will not work.
General Infoamtion regarding Test Management in Solution Manager can be found in our Wiki page in section Test Option 1.
http://wiki.scn.sap.com/wiki/display/SM/SAP+Solution+Manager+WIKI+-+Test+Management
Let me know if you have further questions.
Kind Regards Reiner

How do I add user registration to a website?

OK, so I have a project I want to undertake, but I am facing a major hurdle and looking for help. My site requires me to make it possible for a user to
1) Register for an account
2) Post content on the site
3) Give me some admin control to prevent spamming, abuse, ect.
I've never under taken a web project with anything like this before, and I'm fairly new to Dreamweaver. Is there an easy way to accomplish these tasks though Dreamweaver? For instance Coppermine makes having a photo database very straight forward. Is there something similar for user management?
Thanks for any help you can give.

The big 4 Open Source CMS Frameworks:
WordPress
http://wordpress.org
Joomla!
http://joomla.com
Drupal
http://drupal.com
Concrete 5
http://www.concrete5.org/
Drupal vs Joomla vs WordPress -- which is better?
http://www.computerworld.com/s/article/9219685/Site_builder_shootout_D rupal_vs._Joomla_vs._WordPress
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

What homepage URL do I use for add ons registration

I've entered every search engine on my device and when I hit register jt tells me please enter url WTF??

What are you trying to do? Are you an extension developer?

Can we add custom steps by default in startup,main and cleanup sequence

I have made some of the custom steps which i want by default to be included in start up,main and clean up sequence when ever i press for a new sequence. I am using teststand4.0.Cna any help mein this regard.

Hello kpraveen,
Ray is correct in that you would need to create a Sequence File that loads a new sequence file into memory, then adds the specified step to the setup, main, and cleanup step groups of the new sequence files main sequence, and finally loads the new sequence file into the Sequence Editor. I've gone ahead and put together an example sequence that implements
this. This example sequence places a Message Popup step in the setup,
main, and cleanup step groups of a new sequence file (name will be
"<no path>") loaded into the Sequence Editor. Once you've modified this sequence to load your custom steps, it is up to you where you place it for use in the toolbar.
As Ray suggested, I believe the Tools Menu would be the best place to have this feature since the Tools menu is not process model dependent. To add this option to the Tools Menu:
1. Go to Tools»Customize.
2. In the Items Text field select where you want to place this option in the Tools Menu list and click Add.
3. In the Add Tools Menu Item window, select Sequence as the Item Type from the drop down menu.
4. Browse to New Custom Sequence File.seq in the Sequence File field then select Main Sequence in the Sequence field.
5. Click OK to exit the Add Tools Menu Item window.
6. In the Customize Tools Menu window, change the name of your Tools option in the Item Text Expression field. For example I changed the Item Text Expression field to "New Custom Sequence File".
6. Click OK to exit the Customize Tools Menu window.
7. Now if you go to Tools, you should see the New Custom Sequence File option and once clicked, it should load a new sequence file with your specified steps in the Setup, Main, and Cleanup step groups.
This should get you on your way kpraveen. Good luck!
Manooch H.
National Instruments
Attachments:
New Custom Sequence File_40.seq ‏5 KB

Add extra step to approval workflow

Hello,
I have an approval workflow where it requires 2 people to approve the document, one after the other. All working nicely.
Once both approvers have approved the document, I would like an extra step (task) added before the workflow initiator is emailed that the workflow has been approved.
I would like a third person to be emailed to do something with the document (I can add the instruction in the email that is sent).
After the third person completes the task, then the workflow initiator is notified the approval workflow has finished (as per usual).
Is it possible to modify the approval workflow to add that extra step? And if it is, could you kindly advise how to do that? I would be very grateful.
Thank you.
Mel
Mel

Ah, I change initial load job, to pass "writeRolePrivilege" and it's ok.
but I don't know which table i change.if you know it, tell me. thanks

Add-on registration steps

Similar Messages

Maybe you are looking for