Add Order Quantity to Pick List PLD

Can someone tell me how to add the Sales Order Quantity to the Pick List PLD. I tried adding a database field with PKL1-OrderEntry and then adding another with RDR1-Quantity and then relating that to the former with no luck. Any ideas from the PLD experts out there?.
Thanks,
Karl

Karl,
You have already done 80% of work by adding a database field with PKL1-OrderEntry and then adding another with RDR1-Quantity and then relating that to the former
You will need to add another database field PKL1-OrderLine (Order Row ID)
Then in the RDR1.Quantity field
Relate to: PKL1-OrderEntry
Next Segment: PKL1-OrderLine
This should work.
Good luck
Suda

Similar Messages

Group Items - Pick List PLD

Hi Guys,
Is it possible to change the standard 2007A PLD Pick List document so that it can group items together?
For example a pick list is created for 5 orders. In 3 of the orders is the same product, item AAA.
Instead of the standard report grouping the documents so that AAA appears 3 times, is there a way to group items so that it will appear only once?
Thanks,
Liam.

Hi Liam,
Crystal would be easy to get this.
Here's a link to how to do this in PLD (I've tried it - it takes some testing): http://www.sdn.sap.com/irj/scn/businessone-elearning
Part 3 - Depencies covers grouping & sorting.
Hope that helps,
Heather

System variable for Warehouse name in Pick list PLD

Hi Experts,
My customer would like to show the Warehouse name on the Pick List print layout.
What is the System Variable to display the Warehouse name on the Pick List?. Iu2019m working with Sap Business One 2007A.. Where can I find the system variables for Chile localization. Thanks Very Much
Claudia

Hi Claudio,
Try this,
->> Open the Pick List(System) PLD and Save as the New PLD.
->> Open the NEw PLD and Create 1 Database Field(for WareHouse Name) in Repetetive Area.
Table -> OWHS - WareHouse
Column -> WhsName - WareHouse Name
Save as and Run the Print Preview.
IF will not print the WareHouse Name in Print.
Do this in PLD.
->> Open your PLD.
--> Ralate to WareHouse Code Field ID in WareHouse Name Field at Content Tab on Properties Window.
Regards,
Madhan.

Printing Order acknowledgement and pick list

SAP 2007 A
Please follow scenario:
Create sales order with 3 line items. If we print order acknowledgement only display is correct. If we print either the pick list only or the order and pick list combination we sometimes see the three items repeated on the pick list and sales order prints fine. This only occasionally happens and we cannot see any pattern as to why it happens. Anyone ever experience this and/or have a suggestions as to what may be causing the problem

What is your PL? It sounds like a bug to me.
Thanks,
Gordon

How to add Order quantity in outbound ASN ?

Hello Experts,
I need to send the order quantity along with the delivery quantity in the outbound ASN. What is the procedure and which field do I need to include for order quantity ?
Thanks in advance

Hi Darshak,
The screenshot shared by me is just an example from the SAP standard IDoc DESADV (DELVRY02) you can modify this and create custom type based on your requirement. I think in your case this has been modified as basic type is saying ZDESADV you need to talk to your technical / functional team who can help. As far as standard SAP are concern you will find the E1EDL24 segment under data record(Screenshot attached)
ORMNG is a field where orignal order quantity gets stamped at the time of Delivery creation and you can find this field into table LIPS

Add ordered quantity to delivery note idoc desadv01 with user exit

Hi,
I am using the IDOC DESADV01 to output electronic delivery info when a user PGIs on a delivery note.
The problem is I need some extra data like the original order qty, this exists in field VBAP-KWMENG
So I think I would need to extend the idoc and do some kind of user exit to populate the value into the new idoc field.
Unfortunately I have no experience with this, can anybody advise if its the correct way and how to get started?
With thanks
Rob.

I apologies our system is totally different based on that I suggested.
But current I guess you have to extend idoc.
Below link is helpful for extending idoc.
Let me know if still if you face any problem.
http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi.jhtml
Thanks,
Narayan

PLD and Pick List question

Hello
I am trying to add ShipToCode from the RDR1 table to the PLD for Pick List, but it gives me a blank column when it should display the text values that are in ShipToCode..
Is there a way to display the values for ShipToCode?
Any help is appreciated, thank you

Hi David,
Check this thread for your answer:
Add Order Quantity to Pick List PLD
If you still have questions, just ask.
Thanks,
Gordon

Picking list cannot preview in Sales Order

Dear all expert,
I encounter problem in sales order with picking list in logistic tab being marked.
The system didn't allow picking list + order dialog box to allow to be choose & print.
There is similar setting & environment for another two companies. The picking list allow to print/preview in sales order. However, same scenario apply to company C, the picking list didn't allow to preview & print even the sales order logistic tab -> picking list being checked.
For your information, printing preference -> sales order -> print picking sheet had been marked as default.
Any idea & other configuration?
Thanks in advance.
Regards,
Eric

I dun think there is because of authorization issue. As the user was manager, superuser still recreate the same issue.
Any other suggestion from other? The question still not yet resolve..
Thanks for your suggestion.
Regards,
Eric
Edited by: Eric Tan Yan Liang on Aug 15, 2010 2:47 AM

Sales Order in Pick List

Hi all
How to display the Sales Order Document Number in Pick List to show in a Pick List User Defined Title field?
Kedalene

Hi Kedalene,
If i understand u correctly then Sales Order no is already in Pick List form.
If that Column is not visible then activate from Form Setting of Pic List. Column Name is Doc No which will show Sales Order no of Pick List.
If i am not understanding then Please explain more.
Thanks
Regards::::
Atul Chakraborty

Released qty exceeds available qty pick list error

Hello experts,
I have the following scneario:
1) In stock 570
2) COmmitted 10,100
3) Available -9530
I want to create a pick list for 100 and the system doesn't let me saying " Release qty exceeds available qty".
Can someone please explain why?????????????????????
Thanks

Hi,
As an enhanced functionality in SAP Business One version 8.8, the Pick and Pack Manager now allows the user to release items to a pick list even when there is no available quantity to release, such as when merchandize exists but has not yet been entered into SAP Business One.
In spite of this enhancement the user cannot release an item from a Sales Order to a Pick list when the item does not have sufficient available quantity in stock to cover the quantity of the Sales Order.
The system shows the following error message:
"Released quantity exceeds available quantity"
Solution
This enhanced functionality only works if the "Block Negative Inventory by" checkbox is not selected under Administration -> System Initialisation ->Document Settings -> General tab
Check Note No. : 1485867 as well.
Kind Regards,
Jitin
SAP Business One Forum Team

Material pick list

Hello Gurus;
I want to see the material pick list for a particular order in my system. I can see it for other maintenance orders, except a few orders. I have checked that the orders in question are released & material posting against the order is not performed, also delta print is not ticked in the order. I would like to know, what is causing the erratic behaviour, pls. suggest.
Points assured.
Thanks & Regards
Hemant

Hello Thyagarajan;
To see the material pick list (many other preconfigured print list): go to selected order in change mode; order-> print->order-> then select pick list
There are following requisites to see the material pick list:
a) Order should have compents attached
b) order should be realeased
c) It should not be printed before
d) printer should be configured, otherwise use LP01 as standard
Hope this helps.
Hemant

Crystal Report Pick List - "Table ADM1 could not be found" Error

Hi,
When preview is select in sales order, we select pick list gets error.
Crystal Report Window Forms Viewer:
"Table ADM1 could not be found"
Error in File Temp { .........} .rpt
The table could not be found"
If I login remotely , then log into SAP as this user I do not get an error.
I have given user full authorisation.
I have run Verify Database.
I am assuming it is some database or network user access rights.
Could anyone help on this?
Kind Regards,
Eric

Report was developed and tested against a 'test' database and then imported into a 'production' database.
Problem appears to be that when B1 connects it does not reset the login credentials for the unlinked tables such as ADM1 and OADM.
Performing the following steps appears to solve the problem. Not sure how many of them are really necessary.
1. Develop and test against the test system as before.
2. Save as a .rpt file outside B1.
3. 'Set Datasource Location' to the appropriate B1 datasource for the production database and individually link every table as well as the data source.
4. Save the .rpt file again.
5. Import into the production database.
This does not specifically address the issue where it worked when logged in to the server but not remotely. Perhaps when logged in remotely the test database was not visible but when logged in locally it was.

Printer for Pick List

Hi,
Just want to know if there's a way I can set a certain printer for Pick List for a certain Distribution Channel.
if useful.
points will re rewarded.
else.
do nothing
endif.
Thanks.

Hi,
The Pick List is printed from the Pick and Pack Manager.
goto Inventory > Pick and Pack > Pick List and then Open the Pick List and Print from there.
If this is what you are doing then if your FMS are set to Auto Refresh then as soon as your Pull the Pick list the FMS should fire and the mode should change to UPDATE.
Also, u can try this.
You can print the pick list from the Sales Order by selecting Pick List as your default report. Everything works fine from there. I don't have to do anything else then the sales order to get the Pick List right. I only have to select which file I want to print.
hope this works 4 u.
cheers,
Hema.

Pick List UDF data

Hi Everyone,
I would like to ask if it is possible to pass the data I encoded in the Pick List and upon clicking the Deliver button the value will be loaded in a user defined field in my Delivery Document? Here's the scenario:
I created a UDF in the Pick List to record the truck that will deliver all sales orders in one pick list. I need to pass the truck data in all delivery documents that will be created which are based on the sales orders in my pick list. Will that be possible? Any help will be appreciated. Thanks in advance.
Malu

Hello
With Formatted Search on Delivery:
select top 1 'UDF_NAME' from opkl T0 where T0.AbsEntry = $[$38.10000308.0]
regards
János
Edited by: János Nagy on Aug 25, 2010 4:33 PM

PLD one to one pick list to sales order

I have bit of an unusual situation. Please bear this in mind before answering. Make the assumption the every pick list will only have the contents of one sales order. But... I'm trying to get the BP address and cardcode onto the page header in PLD
What I'm trying to do right now is to create a field with Pick list - rows : OrderEntry and in the next field set it up as Sales Order : Bill To and relate it back to the previous field
I can get it to pull the orderEntry into the header area, but if I try to add the SO:Bill To field and relate but, it does not appear to work
Any suggestion

Hello,
As you mentioned even though the Pick list - rows : OrderEntry is called in the header, the SO table is not exposed and there is no possibility to make a join and call the SO bill to Address.
An option left is:
Create a UDF (address structure) on the Pick list.
Call the address via a FMS.
Display the UDF in the Header.
Use a Formula field to call the Business Partner description from the repetitive area 0 to the Header.
hope that help.
Regards

Add Order Quantity to Pick List PLD

Similar Messages

Maybe you are looking for