Adding a JAVA system into Solman

Hi All,
I've recently added a standalone JAVA instance (No ABAP) into our Test setup. I can see the JAVA system (EDJ) in the SLD and I can see it in SMSY under System Components > Java-System, but this doesn't help me when I need to see it under Systems.
My main issue here is that I'd like to download Support Stacks for EDJ and when going via DSWP I can't select EDJ from the list because it's not listed under Systems in SMSY.
Hope this makes sense and someone can help me out :-p
Many Thanks in advance for any info

> Yes I could add it manually, but this doesn't really help when the rest of my systems are driven and updated by the SLD.
No - not ADD it but ASSIGN it.
> I can see the system under System Components > Java-System (which was added via the SLD), but I need to have it under Systems so that it will make downloading stack and packs easier.
- open the relevant ABAP system under SYSTEMS
- change to "change" mode
- select for the relevant Java system (e. g. Enterprise Portal core) "Relevant" and "System component assignment"
- select the system component
- select "Java"
Then you can download both SPs for ABAP + Java at the same time.
Markus

Similar Messages

Adding Stand alone Java System In solman

Hi Experts,
Can we add a stand alone java system in solution manager.We have a standalone java system installed for Enterprise portal system.If possible please help me with any help full documents.
Regards,
Vamshi.

Hi,
yes, it is possible to monitor SAP AS JAVA on Solmon.
1. On System JAVA is installed, start sapccmsr agent
2. Before that you need to copy csmreg file to your java system.
There is an excellent from service market place about this. please refer the following
service.sap.com/monitoring
Thanks!

How to LMDB configuration Java system to Solman

Dear Gurus,
We have already installed a java instance system. We want to define and connect to it to our solman (LMDB). We have already defined many ABAP systems in the solman, but we dont know how to do it for JAVA instance system. Which guide should we follow for it ? Could you please help us ?
Regards

Hi Kemal,
Please check below SAP notes to register Java system to SLD based upon the Java system version :
For As Java NW 7.1X and higher
1786493 - Setting Up the SLD Data Supplier for AS Java Based Systems (NW 7.1X and higher)
Setting Up the SLD Data Supplier for AS Java Based Systems lower than NW 7.1X:
SAP Note 673144 (J2EE Engine registration in the System Landscape Directory).
Kindly check that the SLD and LMDB sync job is running correctly;
So that the system will be automatically added in LMDB after it has been registered in Solution Manager SLD.
Hope this helps.
Thanks & Regards,
Nisha

WEB AS JAVA System In SOLMAN

Hi Experts,
              Normally we add the abap system in SOLMAN where we can monitor.
              Is it possible to add a web AS java in the SOLMAN where we can
              monitor centrally. If so can you please suggest me some documents
              or procedure to do this.
Regards,
Vamshi.

Hi,
yes, it is possible to monitor SAP AS JAVA on Solmon.
1. On System JAVA is installed, start sapccmsr agent
2. Before that you need to copy csmreg file to your java system.
There is an excellent from service market place about this. please refer the following
service.sap.com/monitoring
Thanks!

How to add EP 7.0 system in SOLMAN with smsy

Hi Gurus
I have solman ehp1 SPS25, want to add the managed systems through TA :SMSY
The Tabs are showing in the Landscape components are __>
1. server 2. Databases 3. Product systems (Product systems w/o product, SAP ERP, SAP SOLUTION MANAGER)
4. Technical Systems ( JAVA,..)
I want to add a EP 7.0 system in to SMSY, so i added at (server, Databases). but in the Product systems i could not able to see the SAP NW ,....)
kindly let me know how or where to add an EP system into SOlman.
Thanks in advance
Regards
Balaji

Hello Balaji
1 i think i have to configure this in http://<solmanhost>/sld by giving the path of EP system and EP systems user J2ee_admin
please correct me.
--> You have to create the data supplier bridge in your http://<ep7host>:5<instance no>00/sld under administration --> data supplier and give the path of the Sol man system with user SLDDSUSER (normally or a user with sufficient authorization). J2EE_ADMIN probably has enough rights but I wouldn't recommend placing J2EE_ADMIN in such connection as the user-id can get locked if the password is incorrect or at same point of time the password is changed and you forget to also update the data supplier user/pass.
A data supplier bridge will send updated data to the target defined in the data supplier. So after you trigger the update of your local EP7 SLD, the data supplier comes into action and you should also see the timestamp is updated in your Sol Man SLD (under technical systems search the SID of your EP7 SAP system).
2 can it be done in Portal's VisualAdmin? please correct me.
do i need to delete the existing portal system ( which configured manually) from solman smsy?
Two times yes I would recommend you cleanup your manual entries (deleting them)
Kind regards
Tom

SAP NW 7.4 as java system sync with solution manager system 7.1 issue

Dear all,
I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
Below are the activities completed:
1) Through template installed I have rgeisterd the system into Solman SLD.
2) Sync completed succfully exact product version is shwoing in solman SLD
3) after that I have checked in SMSY and LMDB its showing prefectly
4) But in SMSY its shwoing only under technical system,not showing product systems
5) I have assigned in product system in LMDB
Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
I ma getting belwo error.
No system found for this product/product instance
Message no. SOLAR_SPROJECT110
Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
Advance Thanks

Hi,
re-check if the 7.4 system is correctly registered in the solman SLD system.
Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
Please note - SLD -> LMDB -> SMSY.
So, if the first 2 don't have the correct information, you wont have much joy with smsy.
Rgds
Deepak

Adding a JDBC driver in Sun Java System Web Server 7

I'm trying to configure JDBC database connection pooling for a Microsoft SQL Server 2005 Express Edition though the Sun Java System Web Server 7 administration console. I don't want to use the MSSQL JDBC driver that comes bundled with the SJSWS 7. So I've downloaded the lastest MSSQL JDBC driver from the Microsoft website and put in the "lib" subdirectory of the SJSWS installation directory. So when I go to add a new JDBC resource through the administration console, the newly added MSSQL database driver doesn't appear in the "Driver Vendor" drop-down box.
How do I add the downloaded JDBC driver to the server so that it appears in the "Driver Vendor" drop-down under "Create JDBC resource".

Check this documentation from MS on using the JDBC driver with DataSource
http://msdn2.microsoft.com/en-us/library/ms379052.aspx
SJS Web Server 7.0 should work with any driver that has support for javax.sql.DataSource. The great majority of drivers do.
So instead of using the driver name, use the DataSource class name:
com.microsoft.sqlserver.jdbc.SQLServerDataSource
The properties to add should be:
user=username
password=password
servername=sql_server_hostname
portnumber=sql_server_port
databasename=databasename
In general, all the setters required to get the datasource configured can be set as properties.

Sun Java System Application Server into Netbean 6.1

Hi , I am new to Java community,
I like to lean J2EE so I downloaded
jdk-1_5_0_16-windows-i586-p and installed
then I installed
java-tools-bundle-update5-windows
I am trying to do the initial setup and do the sample
The Java EE 5 Tutorial
See this tutorial for information on building and deploying Java EE 5 applications.
When I try to register the Sun Java System Application Server into Netbean 6.1
I could not I have warning, says
Provide a valid server installation location
But I gave, C:\Sun\AppServer
If you guys can give any light on this appreciated

It doesn't sound like you have installed a Java EE (formerly J2EE) application server. Your download of "jdk-1_5_0_16-windows-i586-p" is Java Standard Edition, which you need, but you also need an implementation of Java Enterprise Edition. The [Sun Java System Application Server|http://developers.sun.com/appserver/] is certainly a valid Java EE implementation, but I don't see in your steps where you downloaded that. There are several types of NetBeans downloads ("bundles") you can perform and I believe that one or more bundles (such as "All" and "Web & Java EE") includes GlassFish as part of the download. I recommend using the GlassFish Java EE implementation that comes with NetBeans 6.1 for learning how to use Java EE with NetBeans. Alternatively, you can download GlassFish separately at [https://glassfish.dev.java.net/|https://glassfish.dev.java.net/].

How are the java system properties loaded into the Oracle 8.1.7

I have listed the java system properties both standalone and in the Oracle database. The standard list of system properties is quite extensive and informative. But the list of system properties from the Oracle database is severely truncated.
I expect these properties are initialized on database startup.
If that is the case, I expect there to be a file and initialization parameters that define where the information is kept and there values.
Can anyone give me some guidance?

System*.properties file should be located in the $ORACLE_HOME/javavm/jahome directory
I have listed the java system properties both standalone and in the Oracle database. The standard list of system properties is quite extensive and informative. But the list of system properties from the Oracle database is severely truncated.
I expect these properties are initialized on database startup.
If that is the case, I expect there to be a file and initialization parameters that define where the information is kept and there values.
Can anyone give me some guidance?

Sun Java System Portal Server 6.0 FAQs

Sun Java System Portal Server 6.0 FAQs.
Author: Sanjeev Agarwal
Q. How to connect to external URLs from Sun ONE Portal Server? I want to use URL Scrapper for some of external sites/URLs.
Ans:
You can connect to external URLs if you have a Proxy Server running.
If you are using Web Server addition of Sun ONE the Portal Server then
go to /opt/SUNWam/servers/https-hostname.domainname/config/ dir
In the jvm12.conf file, enter the followings:
http.proxyHost=proxyservername.domainname
http.proxyPort=80 (or the appropriate proxy server port number)
https.proxyHost=proxyservername.domainname
https.proxyPort=80 (or the appropriate proxy server port number)
If you are using Sun ONE AppServer addition of Sun ONE Portal Server then
go to /var/opt/SUNWappserver/domains/domain1/<server-instance>/config dir
In the server.xml file, enter the followings:
<jvm-options>-Dhttp.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttp.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
<jvm-options>-Dhttps.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttps.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
After this modification restart the server.
Q. Explain all the processes (solaris 8 and S1 Portal Server 6.0) which runs when I start the Sun ONE Portal Server.
Ans.
These are the processes that a running Portal Server installation (Sun ONE WebServer addition, without SRAP) generally has by default.
1. Directory server processes:
- ns-slapd (LDAP server instance)
- uxwdog (admin server process) (parent process)
--- ns-httpd
----- ns-httpd
2. Auth Helper processes:
- doUnix
3. Web-Server/Identity-Server/Portal-Server processes:
As the Portal Server and Identity Server runs as web application on the Web Server, so they share the same JVM and processes.
- uxwdog (web server admin server process) (parent process)
--- ns-httpd
----- ns-httpd
(for each web server instance)
- uxwdog (parent process)
- ns-httpd
- ns-httpd
or (in case of MaxProc=n )
- uxwdog (parent process)
--- ns-httpd
----- ns-httpd
----- ns-httpd
----- n
Q. I have created a custom Provider but getting this error when I access the desktop, what do I do?
> error in the desktop.debug file:
> ERROR: DesktopServlet.handleException()
> java.util.MissingResourceException: Can't find bundle for base name CustomTabContainerProvider,
Ans:
It needs a resource bundle for the custom provider. You need to create a file CustomTabContainerProvider.properties (as mentioned in the error message) and put it into the /etc/opt/desktop/classes directory. If you are not using any properties defined in this resource file then it can be a empty file. Have a look on the properties files that bundled containerProviders uses in dir <portal-install-dir>/SUNWps/web-apps/https-<host.domain>/portal/WEB-INF/classes.
As you are extending JSPTabContainerProvider class, you can just copy the file JSPTabContainerProvider.properties from the above directory after renaming it to the <defined-provider-name>.properties (in your case CustomTabContainerProvider.properties) and move it into /etc/opt/desktop/classes directory.
Q. what is actually multiple instances of Portal Server means?
Ans:
Multiple instance of Portal Server means, you will have more http listeners for the same desktop contents and the same identity profiles stored in a single Directory Server which all the instances share.
In simple words you can have your Portal Server listening on different http ports, but uses same configuration, desktop and identities.
It can help you to share the load for Portal Server http requests. The alternate methods are to create more web server virtual server processes (maxProc=n, but in this case the listening port will be 1 only) or use some hardware load balancer.
You can achieve more from multiple instances if you have a multi level organization, you can change the look and feel of all the instances, images, services, components and can assign each instance to different organization or sub-organization.
Q. How do I check the availability of the Sun ONE Portal Server/Identity Server services.
Ans:
You can check the availability of Sun ONE Identity Server services from following urls.
http://<host.domainname>:<port>/amserver/sessionservice
http://<host.domainname>:<port>/amserver/loggingservice
To know the availability of components of Sun ONE Portal Server like Desktop/providers/Rewriter/Netmail you have to login into desktop. These are not services, but just the programming identities which will work if your Web Server and Identity Server is running.
Just go to URL http://<server>:<port>/portal/dt , if it shows up that means your portal server is fine, and these entities will work for sure.
Q. I am able to add the yahoo channels to existing users. But I am getting the weather for London not for local New Jersey. My language pref is to en|en_US and also the server is the default U.S server and not europe. How do I add the cities I want to see on weather channel?
Ans:
A Portal user himself (after login) can select what cities he want to see in weather channel.
Steps:
- click the edit button of weather channel
- click on the area you belong to from Available Sections
- select the cities from Available Cities select box and add them to Your Choices.
- click finished from select city page and then again click finished from select area page.
It will come back to the Portal Desktop and you will see all the cities you have selected in the weather channel.
Q. How to use getContent() method to use in custom jsp providers (developed by ourselves) so that it can be used to retrieve a jsp page. I have already placed the JSP file in the directory structure /etc/opt/SUNWps/desktop/default/channel_dir. But still the jsp is not being displayed.
Ans:
You don't have to do anything in the custom JSPProvider's getContent method except the call { return super.getContent(request,response); } . If all you want is just to show your jsp, then create a channel from the default JSPProvider, and edit the property contentPage of that channel from samplecontent.jsp to your jsp name, save the changes and login again. You should see your JSP.
Q. I want to remove all the buttons (help/edit etc.) from all the channels/one particular channel in my desktop?
Ans:
You can hide any buttons you want from any channel.
These steps show how to hide all the buttons.
1. Create a channel say "myNetlet" from netlet provider.
2. Set the channel title to "myNetlet"
3. Go to the dir /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider and edit the file providerCommands.jsp, and modify the last line :
from :
<%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%>
to:
<% if ( !(title.equals("myNetlet"))){ %><%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%><% } %>
4. Clean the dir mentioned below which contains compiled JSPs. /var/opt/SUNWps/https-<host>.<domain>/portal/tmp/_jsps/_etc/_opt/_SUNWps/_desktop/_default_en/_JSPTableContainerProvider/_html and reload the page.
Relogin, and you would not see any buttons on "myNetlet" channel. You can customize this logic as per your needs.
Q. How to change the title of SampleJSP Channel. I tried to change the channel properties title value via iplanet directory Server Access Management GUI. But it is not getting reflected.
Ans:
Through Admin console you can change the channel property "title", and as soon as you refresh the page (Shift reload) of relogin in the portal it get's reflected.
The reason to this problem may be due to the channel property "title" is having "propagate" value as false and you are setting the channel title in the org level display profile not in the user level display profile.
So better you change the channel name in user's display profile also.
For this login into admin console and go to :
- View: "User Management" -> click on organization -> Show: Users
- click on the blue arrow of that user
- click on Edit in section Desktop (this will open a window)
- then change the channel properties same way you do for Organization display profile.
Q. Login Problem with SunOne Portal 6.0.
I was able to download and install sun one portal 6 on Solaris 8. The sample portal page came up after installation. However whenever I try to login to the Login channel with "amadmin" and the passphrase I used during installation, it takes me to another page - iPlanet/LDAP authentication page. Here I tried using the same login, but fails every time (the same login page appears). The url that shows is "http://<hostname>/amserver/login?module=dproadmin&goto=/amconsole/base/AMAdminFrame"
I tried registering myself as a new user as well. This too fails.
Ans:
Make sure you are giving fully qualifying the hostname in the url which invoked the desktop. This in fact is documented in the administration documentation. If the hostname is not fully-qualified, the login page goes into an endless mode. Again, the correct url is "http://<fully-qualified-hostname>/portal". Once you get to the desktop, the login and the new user registration works.
Q. How to send variables/parameters from 1 app to another app deployed on Sun ONE Portal Server? It may be the apps or different JSPs of JSP provider channel.
How to achieve inter channel communication in Sun ONE Portal Server?
Ans:
You can use servlet context object or session, or may be the request object itself to store the information from one channel and use that in another channel. The use of either of these 3 approaches may depend on your requirements. Using session, the information will be available to that user's channels only, using request, the information will be available for that user and that request only and by using ServletContext you can share the information across users and sessions. You can obtain DesktopServlet's ServletContext object inside JSP/JSPProvider.
Q. I am trying to modify the default desktop JSPs in TableContainerProvider and TabCotntainerProvider dirs, but it is not picking my modified JSPs ? what do I do?
Ans:
One easiest way to 100% ensure that it updates all your new jsp pages is to remove all the compiled jsps so that with next request the Sun ONE Portal Server compiles all the jsps and will make sure that your modification will be taken care of in next request.
Go to /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ and remove everything. and access the Portal server, it will be little slow as it has to compile all the JSPs again. Here you will find directories in the name of Containers and Channels, so if you are modifying any particular Container/Channel you can just delete that only. This approach can help a lot during development time.
Q. What is the location of compiled JSPs in Sun ONE portal Server and what servlet spec does it supports?
Ans: The Portal server 6.0 runs on Sun ONE Web Server 6.0 sp2, which supports only jdk 1.3 and servlet spec 2.2 only. The Sun ONE Portal Server keeps the compiled jsps of desktop and channels in : /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ dir as per the channels/container names.
Servlet 2.3 is supported if you run the Portal Server edition that runs on Sun ONE Application Server 7.0.
Q. How do I change jdk for Sun ONE Portal Server to another jdk? I want to change the JDK of only one of my Portal Server instances, is it possible? how?
Ans:
Yes you can achieve both.
A. To change the JDK for all the server instances:
Open <portal-install-dir>/SUNWam/servers/https-admserv/start-jvm file and modify the first line
NSES_JDK=/usr/java_1.3.1_04; export NSES_JDK
to
NSES_JDK=<your-jdk-location> ; export NSES_JDK
then open <portal-install-dir>/SUNWam/servers/https-<instance-name>/config/jvm12.conf file of all the server instances and add a line
jvm.option=-server after the first line
B. To change the JDK for a particular server instances:
Make a another copy of the start-jvm file rename it and modify the jdk location in it as mentioned above.
Open the start script from <portal-install-dir>/SUNWam/servers/https-<instance-name> dir and modify these lines :
if test -r {SERVER_ROOT}/https-admserv/start-*
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/start-*
modify this to
if test -r {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
Note: As Portal Server 6.0 uses Web server 6.0 sp2, jdk 1.4 is not supported.
Q. How do I create a custom login page or a link, which will just log me into the portal server.
Ans:
You can create a custom page in your jsp page, just add this portion of html into your web page :
<FORM action="http://<server>:<port>/amserver/login?module=<login-module>&page=1" method=post name=login_form2 target=_top>
Login page using <login-module><br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
The <login-module> can be LDAP or Unix or Membership which ever you have enabled. Or instead of this you can create a link. For example for LDAP auth module :
"<a href="http://<server>:<port>/amserver/login?module=LDAP&page=1&TOKEN0=user&TOKEN1=password" target=_top> Login into Portal </a>"
where user and password are the user credential for the portal server.
Q. Can I install a portal server pointing to another Identity server? I want to install few postal servers (on different machines) pointing to same identity server, is it possible?
Ans:
No, right now the Sun ONE Portal Server is tightly integrated with Sun ONE Identity Server so you can't just install only Sun ONE Portal Server and point it to another Sun ONE Identity Server. You can have a common Directory server if you want.
Q. I have an application which takes input in from anonymous user and then to complete the request the user than has to login. I am having problem in passing the taken input from anonymous page to logged in user. all the request parameters are lost when I log in. How do i get the request parameters after I log in
Ans:
You can create a custom login page and submit the form to "/amserver/login" with a hidden parameter "goto" through which you basically specify which url to go after you log in. So you can use this mechanism to create a query string with all your request parameters you want to pass after login. For example:
You can create a jsp which take few inputs from user and to complete the request you have to login so it posts the input form to a login jsp and stores the parameters taken from user in a hidden field (goto) :
<FORM action="/amserver/login?module=LDAP&page=1" method=post name=login_form2 target=_top>
Login page using LDAP<br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<INPUT TYPE=HIDDEN NAME="goto" VALUE="/portal/dt?param1=<%=request.getParameter("param1")%>&param2=<%=request.getParameter("param2")%>">
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
After you login through this page both the param1 and param 2 will be available in the request object after you login and you can retrieve them in your application or jsp.
Q. I have few System.out.println in my jsp which i am using in my JSP provider channel, but when I look at the portal server's /var/opt/SUNWam/debug/desktop.debug file, none are there. I looked at the web server's access and error logs too, but it is not there also. Can somebody tell me how do it get those ? Do we have any other mechanism to put debug logs ?
Ans
By default the binary which web server runs is uxwdog which eats up System.out.println output. If you want to see the System.out.println then you need to change the product binary from the start script of the portal server instance.
- Go to <portal-install-dir>/SUNWam/servers/https-<instance-name> and open the start script
- Change the PRODUCT_BIN=uxwdog to PRODUCT_BIN=ns-httpd , save the file
- Run the script ./start to start the portal server
Note : with ns-httpd ON the server will not leave that shell, and in the same window/shell you will be able to see all your System.out.println statements. To close the server you have to kill the server process with "kill -9 pids" command
Alternate way is to use api inside your application or jsp:
<%@page import="com.sun.portal.providers.jsp.JSPProvider, com.sun.portal.providers.*, com.sun.portal.providers.containers.*, com.sun.portal.providers.context.*" %>
<% JSPProvider p=(JSPProvider)pageContext.getAttribute("JSPProvider");
ProviderContext pc = p.getProviderContext(); %>
<%-- after that you can use these lines any where in your jsp --%>
<%
pc.debugError("your error msg");
pc.debugMessage("your msg");
pc.debugWarning("your warning msg");
%>
The particular mgs will be shwon in /var/opt/SUNWam/debug/desktop.debug file as per your "debugLevel" parameter setting in /etc/opt/SUNWps/desktop/desktopconfig.properties file. By default the debugLevel is set to error so only pc.debugError("error msg") will be shown.
Q. Multipart form (file upload) processing in providers? Is it supported
Ans:
The Sun ONE Portal Server's DesktopServlet does not have the ability to process a request with the content encoding type of multipart/form-data. DesktopServlet does not pass the input stream for the request on to the Provider.
To accomplish handling of multipart/form-data type requests, it is necessary to create a companion servlet or JSP that process the multipart/form-data. This servlet can then pass control back to the Portal channel. The data from the file can be shared between the servlet and the provider by using static Java members or by storing the data in a back-end database and then passing a reference to the data over to the provider.
Q. After installing the Portal Server I am trying to login as admin, but it is failing and coming back to login page every time. How do I login?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Try login using these credentials.
Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
Q. I installed Sun ONE Portal Server 6.0 some time back, and now I want to know all the installation parameters and user/passwords for whole portal installation. How do I do that?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
In case you have forgotten the port numbers and PASSPHRASE that you give during installation, you still can see all the information for each component of your Portal Server Installation. The Portal server and it's components like Directory Server, Web Server and IDSAME are installed as Solaris package so the system has all the information for these packages.
Portal Server : See file /var/sadm/pkg/SUNWps/pkginfo
Directory Server : See files /var/sadm/pkg/SUNWamds/pkginfo and /var/sadm/pkg/SUNWamdsc/pkginfo
Web Server : See file /var/sadm/pkg/SUNWamws/pkginfo
Identity Server : See file /var/sadm/pkg/SUNWamsam/pkginfo
Note: In any case you should never edit/modify these files.
Q. Controlling the display of the help (?) button.
Where are the links/image elements defined for the help/edit/minimize buttons? the leafWrapper.jsp pulls the hashtable out of the HttpRequest, and that hashtable is being used by providerCommands.jsp:
Hashtable commands = (Hashtable)request.getAttribute("provider_cmds");
Any idea where this is being set?
Ans:
- You can remove the help/edit button of any channel by adding the line into the Channel's properties by editing the Xml of display profile in the admin console.
<String name="helpURL" value="" advanced="false" merge="replace" lock="false" propagate="true"/>
<Boolean name="isEditable" value="false" advanced="false" merge="replace" lock="false" propagate="true"/>
The Attribute 'provider_cmds' is set into /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider/tablecolumn.jsp :
<dttable:getProviderCommand id="provider_cmds" scope="request" />, and after that only the leafwrapper.jsp is included, but the Hashtable is generated by a class com.sun.portal.providers.util.ProviderCommands.java and made available through taglib classes. So you can't change the generated contents/string in the Hashtable.
But you can change the default 'alt' text displayed and the images linked to the help/edit icons. As this modification is at Provider level, it will change the icons for all the channels in the desktop.
Please see the file:
/opt/SUNWps/web-apps/https-<host>.<domain>/portal/WEB-INF/classes/JSPTABLEContainerProvider.properties.
Here you will find the mapping. The image location are given from the context root of portal server which is by default : /opt/SUNWps/web-apps/https-<host>.<domain>/portal.
Q. I have a number of web applications needed to integrate to portal server. Any pointers or tips of what my option is?
Ans:
You can very well integrate all your web application with Portal server. Portal Server 6.0 has web container same as Sun ONE web server 6.0 Sp2, which runs on Jdk-1.3.
If your web applications are just Servlets/Jsps then you can very well port them on Portal server's webserver which supports war module deployment. (infect for Web server the Portal server and Identity server is like a war module.)
There can be two possibilities in this case, either you put the whole of your application on portal server and make the link available into the desktop via 'Application Provider Channels' or you can create a client to your web application into portal server.
If your web application is on Sun ONE Application server 7.0 and needs authentication, you can also have SSO. If you just want to show the link of your web application into desktop then you can either use URL Scrapper to show the first page of your web application or use Bookmark channel to provide just the url.
The easiest way to make a client of your web application is to use JSP Channel using JSPProvider and put your logic into the samplecontents.jsp file or you can create your own custom Provider extending JSPProvider. There can be a lot of different configurations, depending on the web application you want to integrate and your needs
Q. I removed few channels from the org level display profile but still they are coming to the desktop of users, I had accessed the desktop before. why?
Ans:
If you still see any channel after you remove it from the display profile at organization lever, that means you have to edit the user's display profile. So go to admin console and select User from Show: menu and click on the blue arrow near the user. In the right frame under the 'Desktop' category click on the Edit link (right side). This will open user's display profile in a window. Now edit it as per your requirements.

Unfortunately Web Server 6.0SP2 is no longer available for download.
If you must use Web Server 6.0, you should use the most current Service Pack. It is backward compatible and contains many performance and security fixes.

How to add a system into Solution Manager directory.

Hi!
Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
Also,
How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
AM I right?
regards,
Pratip Bhattacharyya

Hi Bratip Bhattacharyya,
SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
Bye
Message was edited by: Riccardo Escher

Adding a new system to the transport domain

Gurus ,
   currently our landscape is a 3 system landscape . We are SAP BUSINESS SUITE users . we are using ECC 6.0 on AIX with AS ABAP .
   we are planning for one sand box system on AIX with both AS ABAP and AS JAVA . but we have certain confusions and lack of clarity on certain portions . hope over which you all can throw light ,
   - Will there be any difference in license info for using ECC with AS ABAP (or) ECC with AS ABAP + JAVA .
- would be able to add this system to our transport domain without including the system in solution manager
- can we make clinet copies from a ECC system with ABAP alone to a ECC system with ABAP +JAVA
- How to get more clarity on the license perspective of adding this system
please guide us

1. Will there be any difference in license info for using ECC with AS ABAP (or) ECC with AS ABAP + JAVA .
According to me there is not any differences in license, when you apply for the license you have to select the system as ABAP+JAVA and i dont think that you need to install any license for java in ECC
2. would be able to add this system to our transport domain without including the system in solution manager
Yes if Solution manager is not your domain controller. You can add the system into your domain, For the transport between 2 system is the requriement is that both system should be same relase with Same ABAP support pack and Kernel (as per my understnading).
3. can we make clinet copies from a ECC system with ABAP alone to a ECC system with ABAP +JAVA
This is think might not be possible but not sure for this, becuase there must be some ddic difference in both system.
Please correct me if i am wrong.
Regards,
Subhash

Java System App Server 9 + CRLs?

Hi all -
I'm trying to set up my web apps under Java System App Server 9 on a Windows 2003 (Server) box. Everything is working just dandy, except that I cannot seem to get JSAS9 to recognize a Certificate Revocation List for my Certificate Authority certs. I have a URL specified in the CA cert's extensions for the CRL. I also have the CRL in all of my keys generated by the CA cert. Using Windows' cert manager, I can see that my keys and CA cert both list the URL correctly. I made two test keys, A and B, and added key B to the CRL. If I visit the URL specified for the CRL, I see that the key is indeed on the list. But when I visit my JSAS9 server, it still allows me to authenticate with it using the revoked key.
I also exported the CA cert key from my JSAS9 keystore and it only has the issuer name/owner name/valid dates/signatures, no CRL URL (the key I imported into JSAS9 most definitely does have the URL in the x509 extensions).
I haven't seen any config options for either specifying a static list of CRLs or for honoring the CRLs provided with CA certs or user certs. Anybody have any idea where to look for these options?
Thanks a ton,
Reid

Bump

Fetching data from java system

Hi All
I want to fetch the data from Java application into my SAP system how can i fetch that .
Thanks and rgards
Saurabh Khanna

you need BI system to do this, need to extract data using reports.
can also do from solman ehp1.
regards
nag

System Monitoring - Solman 7 EHP1

Hi
Solution Manager 7.0 EHP1 / Windows 2008 / Oracle
Satellite System R/3 Enterprise extn set 110 / Solaris on Sparc / Oracle
I am having trouble configuring System monitoring on solution Manager. Here is what I have done
Added the satellite system to SLD, Configured data collector (RZ70) in the satellite system, Pushed data from SLD to SMSYS (automatic transfer).
Installed CCMS agent + CCMSPING agent in satellite system. Checked connectivity in solman with RZ21. Connectivity is fine.
Created Monitor sets and monitors in CCMS for monitoring satellite system. Client data is visible in CCMS.
Created a solution in DSWP. Created logical component in SMSY. Assigned the logical component to the solution. Now I can see the data in DSWP.
Here are my questions
==================
1. In DSWP, everytime I have to view data, I have to click on "Setup System Monitoring" to view the alerts in the satellite system
I see a red alert reading for instance availability. Similarly,
In the system monitoring workcenter, I see the status of both the solution manager and the satellite system greyed out with a cross. When I move my mouse over it, it reads, no CCMSPING data available.
Any idea as to why this happens?
2. For what I see after I click on "Setup System Monitoring" I have parameters which I can configure. I see default values for these parameters. Is there like a recommendation or a template which can be used to setup these monitoring parameter values?
3. I have configured the ccmsping in the solution manager (for the solution manager) however the ccmsping service refuses to run. It throws a error reading "The system could not find the file specified". The ccmsping exe file is present in the location stated. Are there other files that this is looking for?
4. While registering the agent in the satellite system, I first registered with the CSMREG id. It failed with the message,
INFO: [SMG:040:CSMREG] connected to SMG, host sapsm.NA.XXX.NET, System Nr. 00, traceflag [ ]
INFO: SMG release is 701 , (kernel release 701 )
        RFC Error Info:
         message:
         status: EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
         intstat:
      Go Ahead anyway? n/[y] :
INFO: handling destination SAPCCM4X.SAPR3PR1.00
ERROR: can't register at SMG. RfcRc = 2, AUTHORITY_NOT_AVAILABLE
RFC Error Info for SALF_CSM_AGENT_REGISTER
message:
status: EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
intstat:
I then did this with a dialog user. That worked. Agent was registered in solution manager. Any idea on why this error would show up with the CSMREG? I am concerned about issues which can come up when the password for the dialog user changes.
I am not sure how to upload screenshots of what i see, probably if i do that, it will be easy to relate to the issue which I am mentioning here. Is there a way I can do that?
Let me know if you need any more information from my side to understand this.
Ideas will be appreciated.
thanks
Ravi

Hello Ravi,
Additionally you will want to look at SAP Note 1175058 - Problems with CCMSPING in SAP Solution Manager, especially
c) Ensure that the message server host name in the monitoring options of CCMSPING and the message server of the corresponding main instance of the relevant system is the same in the SAP Solution Manager landscape
(SMSY). Important: The monitoring options of CCMSPING must not be configured using an IP address.
Regards,
Paul

Adding a JAVA system into Solman

Similar Messages

Maybe you are looking for