Adding header in report

Hi Experts,
could you please tell me how i can add one header statemntlike this in my report.
ABC COMPANY
Date-current date
Regards
Rajat

Hi ora-worm,
Thank you very much for your answer ,but what i am trying in my form is i am sending two parameter from one form and i want to display it on the reports.Could you please tell me the way i can implement it.
I the header section i have dragged two text field but i can not understand that how i can use them to show some date which is comming as a parameter
from a different form.
Will you please suggest some way.
Regards
Rajat

Similar Messages

Adding header in split alv using SALV

Hello Champs,
I have a requirement to display 6 diff reports in a screen. I have achieved it by using SALV(Split Container). Now I need to add header to each ALV report. The normal way of adding header in SALV doesnt work in the split ALV.
Can someone help me with this.
Thanks,
Greg

Hi, im experiencing the same situation right now, have you solved the problem? any inputs would be appreciated. thanks!

Common header across reports

Hi,
We are using crystal reports. There are around 400 reports in our application. We want to use a common header across the reports. The main challenge that we are facing now is if I have a change for the header then I have to open all the 400 reports make the change and then re-deploy them. Is there any way that is possible in Crystal where I have a common header report and if I change at on place then all the reports should get modified automatically.
Regards,
Prudhvi

since the reports weren't built using this method or using repository objects, you either have extra work to do now (on all 400 reports) or you need to pay money to get a third party product as per Venkatesh's suggestion above and then do some work for that as well. another product you may wish to look into is Rpt Inspector but you'd have to verify with them as to whether or not this would work in an enterprise environment.
for the subreport re-import method you need to add the report to all 400 reports and then save those 400 reports back to the repository. as a test you may wish to try this out with a couple of (two) reports. then open the "header" report up from the enterprise system, make a change, and then when you open up the two reports that use the header report, you should see the changes in those two reports.
i mentioned repository objects above as that's another way of updating objects on multiple reports when you've got an enterprise system and those objects have been stored in the repository and then added to your reports when designing. please see here for more info on this...an older document but the methodology would still be the same.

Adding a Crystal Report (report or layout) in a specific menu location

Hi,
i want to import a CR Report through SDK.
I found an example in the sdk help center. You can find it searching 'Adding a Crystal Report (report or layout)'.
It works but going in the Report and layout manager i find it under 'Lost Reports'.
i cannot find a way to specify the MENU LOCATION just like the Import Wizard allows.
Can anyone help me?
Thanks
Paolo

hi how you solve this??

Editing a pdf form that I created. Adding header error msg "do not have sufficient permissions to perform this task"

Editing a pdf form that I created. Adding header, currently the header only appears on page 1 of a 3 page pdf form. I want it to appear on each page. I am receiving the error msg "do not have sufficient permissions to perform this task"

In Adobe Acrobat use a Action for this.

Hr abap head counting report

need help in head counting report..
how to calculate the head counting report.
what is the purpose of the head count report.

based on requirement u can create
generally we can create by using PNP/PNCE logical database
if u want example to create report search in SDN u will get lot of examples
Gopi

How to create 2 lines header in Report painter

Hi. I am not good at Report painter. I want to create 2 lines header in Report painter just like SAP std report.
When I create a new form, I only have one line header form but cannot add additional header line.
I am looking at the 0SAPFS10-01 Trans.Fig.- Balances. which has two header lines
                           Debit              Credit            Balance       Accumulated Balanc
Periods                     &1FY               &1FY               &1FY               &1FY
I can create only one header just like
Periods                 Debit              Credit            Balance       Accumulated Balanc
cannot add additional line for
      &1FY               &1FY               &1FY               &1FY
please advise me
thanks in advance.

In report painter you can select variouselements based on which the data will be pulled. I haven't seen any report painter with two header lines and don't think report painter allows that. But for your requirement I believe you can select the periods in the header line itself.

HCM: Head cout report for infotype 1019

Dear Experts,
           I am new to HCM abap. I want to develope a head count report of three coloumns
in which I have to show designation/postion, number of overall planned employees in whole organization
for this designation , and number of employees currently working in this designation(in whole organization)
e.g;
Position                                           Planned Employees                             Current Employees
Manager Maintenance                               2                                                             1
Foreman                                                   10                                                           12
Infotype which manage this data is 1019. But I can't see any table to get this data. My question is that how I should proceed with this report, which table, FM etc. I should use to do the above task.
Thanks and Regards,
Sohail

thanks

Monthly Head count report as per Tax authority

Hi Experts,
Our team need to create report as per client requirements for Monthly Head count report by Tax auth. Please let me know is there any standard report through which we could refer for "Total head count per tax auth" output.
I will appreciate your prompt response.
Thanks,
Ankur

Dear All,
S_L9C_94000095 - Info System -> Reports -> Organizational Entity -> Headcount Changes
Balwant.

Head count report showing list of employees as un assigned 0ORGUNIT

Hi All,
Some of my Head count reports showing a list of employees as not assigned to any organizational unit , but in infocube it is showing org unit .
can any one clarify me onthis .
Thanks in advance.
Babu

I have done investigation all inf cube and master data info objects .
in 0ORGUNIT what i found is
0SOURCESYSTEM
0LOGSYS
both fields are missing .
those two fields effect any data loads.
and one more thing when i reload the data it is showing diffrent amount of employees as un assigned org unit.
Thanks for your prompt responce.

SQL code to display Group Header in Reports

Please provide the sample sql module to use group headers in reports.
Even after reading the Extensibility guide, I am not able to write code with proper syntax.
I think all the below 3 parameters has to be used to show group header in Reports.
"oracle.sysman.eml.ip.render.elem.TableRender.columnGroupHeader"n
"oracle.sysman.eml.ip.render.elem.TableRender.columnGroupStart Col"n
"oracle.sysman.eml.ip.render.elem.TableRender.columnGroupEndCol"n.
I am not sure whether in a single call to mgmt_ip_param_value_record function in Reports, all 3 parameters has to be called.
Please help.

You will have to create a new mgmt_ip_param_value_record for each one of those.
I assume it will look something like this:
l_param_values(1) := MGMT_IP_PARAM_VALUE_RECORD(
'oracle.sysman.eml.ip.render.elem.TableRender.columnGroupHeader1',
'My New Group');
l_param_values(2) := MGMT_IP_PARAM_VALUE_RECORD(
'oracle.sysman.eml.ip.render.elem.TableRender.columnGroupStartCol1',
'start column');
l_param_values(3) := MGMT_IP_PARAM_VALUE_RECORD(
'oracle.sysman.eml.ip.render.elem.TableRender.columnGroupEndCol1',
'end column');
Where "start column" and "end column" would be names of columns already in your table.

Changing header in report painter

Hi All,
I have a requirement to change the header(column). I am using the global variable &5PY(Period/Year) in the characterictics value. So it displays an output like 06.2008. But the client needs this to be displayed as June 2008.
Kindly help me out with this.
Regards,
Karthik

In report painter you can select variouselements based on which the data will be pulled. I haven't seen any report painter with two header lines and don't think report painter allows that. But for your requirement I believe you can select the periods in the header line itself.

Adding field in Report Painter

Hello Gurus,
I am working in the Report Painter PR20-001.
My requirement is to add a new column in the output of the report but even when i am able to add a new field and save it on the reports execution i am unable to view the added field in the output.
Kindly tell me the entire procedure to add a new field in the output of the respective report painter output.
Regards,
Swati.

Hi,
Go to Global Parameters Definitaion in report painter, variable will be used only along with the field, just in global paramerters enter your desired field and click in next column, system will show you a pop up select your variable for that field...
now its just done run the report and test it!
If you still not make it refer to standard report of such kind, you will surely get it....
Regards,
Sayujya

Heading in report script

Hi,
I have a report like that:
                    07     Jan-Jul YTD     R12 Jul
2009     STO001     31111110     P31-111     34925.50     44631.48     257909.97
2009     STO001     31111110     P20-111     42.78     364.20     3704.85
2009     STO001     31111110     P53-111     5044.80     6740.31     44175.52
2009     STO001     31111110     P115     0.00     0.00     4018.71
However, I would like to have the header like that:
Ano     Presidencia     Contas     Produto     07     Jan-Jul YTD     R12 Jul
2009     STO001     31111110     P31-111     34925.50     44631.48     257909.97
2009     STO001     31111110     P20-111     42.78     364.20     3704.85
2009     STO001     31111110     P53-111     5044.80     6740.31     44175.52
2009     STO001     31111110     P115     0.00     0.00     4018.71
What can I do to obtain the report?
See my report script below:
//ESS_LOCALE English_UnitedStates.Latin1@Binary
{ STARTHEADING
SUPPAGEHEADING
ENDHEADING }
<SETUP
{ TabDelimit }
{ decimal 2 }
{ SUPCOMMAS }
{ SUPBRACKETS }
{ NOINDENTGEN }
<ACCON <SYM <END
<ROW("Ano","Presidencia" ,"Plano de Contas","Produto" )
// Column Members
//{WIDTH 15}
{MISSINGTEXT "0.00"}
<COLUMN ( "Período")
"07"
"Jan-Jul YTD"
"R12 Jul"
// Page Members
"Actual"
{SupMissingRows}
// Row Members
{ROWREPEAT}
<DESCENDANTS "Personal Perfil"
{ROWREPEAT}
"2009"
{ROWREPEAT}
<DESCENDANTS "Prêmios Emitido-"
{ROWREPEAT}
<DESCENDANTS "SPCT"
<DESCENDANTS "STO Escr"
Thanks

Essbase reports do not put row headers on (Headers for the dimension members from the <rows command).
The best I have been able to do in the past was to have a file with the header info I wanted and after the report was created concatinate the header file with the report file using the Dos copy command.

Purchase Order Header Status report

Hi All,
Just wondering in which table /report I could get the values of "STATUS" tab in PO header which has information about Ordered,Delivered,Still to deli.,Invoiced,Downpayments..
Does anyone know from wher i can get this information for list of PO's?
Inputs will be highly appreciated..
Thanks & Regards
Vikrant M Kelkar

Hi Sri,
Thanks for the reply, but change document table CDHDR doesnot help us..
Anyother table that you know...????
Regards
Vikrant M Kelkar

Adding header in report

Similar Messages

Maybe you are looking for