Head count report showing list of employees as un assigned 0ORGUNIT

Hi All,
Some of my Head count reports showing a list of employees as not assigned to any organizational unit , but in infocube it is showing org unit .
can any one clarify me onthis .
Thanks in advance.
Babu

I have done investigation all inf cube and master data info objects .
in 0ORGUNIT what i found is
0SOURCESYSTEM
0LOGSYS
both fields are missing .
those two fields effect any data loads.
and one more thing when i reload the data it is showing diffrent amount of employees as un assigned org unit.
Thanks for your prompt responce.

Similar Messages

  • Hr abap head counting report

    need help in head counting report..
    how to calculate the head counting report.
    what is the purpose of the head count report.

    based on requirement u can create
    generally we can create by using PNP/PNCE logical database
    if u want example to create report search in SDN u will get lot of examples
    Gopi

  • Monthly Head count report as per Tax authority

    Hi Experts,
    Our team need to create report as per client requirements for Monthly Head count report by Tax auth. Please let me know is there any standard report through which we could refer for  "Total head count per tax auth" output.
    I will appreciate your prompt response.
    Thanks,
    Ankur

    Dear All,
    S_L9C_94000095 - Info System -> Reports -> Organizational Entity -> Headcount Changes
    Balwant.

  • Head count Report

    Hi Experts,
    We have a requirement at my client's place. the client wants to know the total number of employee's working under a particular department.
    For example, In a HR department if there are 4 employees , the report should specify the count ie. give the total number of employees working, not the list of employees.
    Please help me with your valuable inputs.
    Regards,
    Smitha

    Hi!
    Please use the T-code : 'S_PH9_46000219 - Headcount Changes' to know the headcount and changes report
    Regards
    Sheetal

  • Report showing list of installed equipment at site

    Hi,
    I need a report showing
    1. List of installed equipment at site.
    2. List of installed equipment at based on sales order number.
    Please tell me how to find these reports.
    Thanks in advance
    Anil

    run tranz IH08

  • Report  showing list of order confirmations and open/close reservations?

    Hi
    Can we have any standard report having list of  order confirmations and open/close reservations in SAP PM ?
    Regards
    Pooja

    Hi Pooja,
    Try IW12, Display Document flow, if you are looking for a combined report of Order confirmations and Material status.There are various other reports related to order confirmations and Material status seperately. For material status you can use IWBK.
    Better place to post PM questions is in Enterprise Asset management Forum.
    Warm regards,
    Srinivas Potluri

  • HCM: Head cout report for infotype 1019

    Dear Experts,
               I am new to HCM abap. I want to develope a head count report of three coloumns
    in which I have to show designation/postion, number of overall planned employees in whole organization
    for this designation , and number of employees currently working in this designation(in whole organization)
    e.g;
    Position                                           Planned Employees                             Current Employees
    Manager Maintenance                               2                                                             1
    Foreman                                                   10                                                           12
    Infotype which manage this data is 1019. But I can't see any table to get this data. My question is that how I should proceed with this report, which table, FM etc. I should use to do the above task.
    Thanks and Regards,
    Sohail

    thanks

  • How to list those employees who do not have a certain pay rate type set up

    Hi,
    I'm trying to create a report that lists all employees who DO NOT have a certain pay rate role type set up.  An employee can have multiple pay rate roles - for example: chargeable miles, non-chargeable miles, subsistence, etc.
    I want to identify all those employees who do not have, say, subsistence yet set up.
    I joined the employee table to the employee rates table. The employee_role_id=20 is the particular rate role value that I am interested in. I want to only list those employees who do not have rate of role type 20 set up. That way I can go and set one up for these employees.  At present, I am using selection criteria where employee_role_id=20. This brings back only those employees that have an employee_role_id of 20 setup. I would like to do the inverse but setting <>20 only screens out those roles with value 20 and displays all of the rest of the pay role values for each employee.
    Any help is appreciated.
    thx!
    Mark

    if you are not sure about the linking i suggest to just show all roles associated to all the employees,
    group by employee
    create true/false formula for the role_ids  where ONLY your 20 role is TRUE per employee
    then exclude all false - that should give you only the employees that are missing that particular role.

  • Customer Recievables Ageing by Sales Employee showing No Sales Employee

    Dear Sir(s),
    We are on SAP Business One 8.81 PL04.
    The customer recievables Ageing by Sales Employee report shows "No Sales Employee". when we group by sales employee on the selection criteria.
    We have setup all our Customers with sales employees in the Business Partner Master Data.
    Please advise on what could be the cause of this.
    Kind Regards,
    Asif M.

    Hi Rahul,
    Yes, the sales employee details are captured on the invoice.
    Infact, on the "No sales employee" Group, only the Incoming Payments (Type : RC) show for the diferent customers and yet these incoming payments were paid based on the invoices which have the sales employees captured.
    The customers appear both on the "No Sales Employee" Group as negative balances as well as its correct "Sales Employee' group as positve balance. The report shows correctly when we select the group by as  "customer" in the selection criteria.
    Regards,
    Asif

  • Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List

    Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List.But the Employee is active . Is there any setup for this activity?

    Hi,
    This is because the query is excluding the current site you are trying to modify since it is actually in the report.
    You can include in your query:
    or site_id = :Pxx_SITE_ID
    Where Pxx_SITE_ID is the item holding the site_id value and xx is your page number.
    Thank you,
    Erick

  • How to extract the number of employees (Head count) in a particulr month

    Hi Experts,
    We are trying to have a customized report  on  Having the  employee  headcount  for a particular month  with number of employees joined on the month and number of employees left the organisation.What is the way to get it.
    Please advice.
    V Sai.

    Hi Vicky Sai,     
    The standard report is S_PH9_46000223 - EEs Entered and Left
    If you want to obtain the numbers in the same screen you should do the following1
    1 - access the report
    2 - further selection button - select Action type and move it to the Selection fields (you will get it on the screen)
    3 - select action Hiring and action Leaving (so that the report will only count these elements)
    4 - Period - current month
    5 - run the report
    6 - you will now have to see the number of employees (unfortunately you cannot do Sum here as you could do in a Querry that you would build as you would add the Count field so we need to do a little trick)
    7 - Change layout icon - View tab- select Preferred view instead of SAP List viewer ->Microsoft Excel
    8 - Select a template - press save
    9 - You will see now the report in the Excel format. You can do sums if you want, add formulas, or you simply delete the first line and just look at the latest line filled in (total number of EE who left or were hired during the month)
    If you do your own Querry - you can skip the Excel part and make a screen variant with the Sums.
    At least now you have 2 options that you can choose from
    Regards,
    Adriana

  • Negative reporting - Show employees who haven't attended a course

    Hi
    I have two infocube, one containing all employees within the company and on containing courses (incl employee participant information).
    Now I would like to create a query which shows employees which havent attended a specific cause. It should be possible to select the course in the variable screen and then get the list of employees which havent attended the course.
    How can I do that?
    Thanks and kind regards.
    Torben

    Hi Torben.
    I think I made a mistake with constant selection on 0employee - it should be a constant selection for course-ID and a count of 0employee in both cubes, because, IF you have attended a course, you will be in BOTH cubes, so the count will be greater than 1. If you have not attended a course, you will only exist in the "all employees, no course info"-cube and the count will be exactly 1.
    Also, I think you would have to utilize exception aggregation for the 0employees in your counter, to count them correctly for any selection of time, costcenter, etc. (In 7.0 you can use a calculated kf for this, in 3.5 you need to use an infoobject just for this)
    In the query, make two restricted key figures, one counting the employees in each cube (restriciton on inforprovider). Use constant selection on emplty course-ID selection to count employees in the "all employees, no course info"-cube. Put a variable for course-ID in the other RKF, to let users select a specific course.
    Then add the two RKFs in a calculated key figure and make a condition on the calculated key figure = 1 (set it to evaluate for employee only, I think). Hide the two restricted key figures.
    Put 0employee in the rows.
    Now the query should return only the employees who did not attend a specific course. You can add variables for other common dimensions, fx time, costcenter, etc. If you want to drill on the course-ID, fx in the rows after employee to see who attended what, you need to switch off the condition.
    Well, it should be possible to make it work that way and I hope the above will help to get you there.
    Good luck!
    Jacob

  • Rebate report or list which shows the balance of each rebate in the list

    Hi,
    VB(8 list rebates; this report lists the rebates in the selected range and you can drill in...Even after drill in this list does not include settlements or manual accruals and so does not reprent the balance? Any thoughts or experience with this issue?
    a further question;
    when you have several hundred, is there a report or list that shows the open balance of each rebate with out drilling into each rebate number?
    thanks
    Craig

    Hi,
    Have you tried the following :-
    Compare Rebate Basis: Billing Documents Versus Statistics
    Title
    Comparison of the Rebate Basis and Accrual Corrections
    Purpose
    The report RV15B002 gives you the option of comparing statistics from the rebate settlements with the values from the billing documents. These values can differ if you start rebate processing later and want to take into account old billing documents. The report also allows you to post a rebate correction agreement, which corrects accruals.
    Regards,
    Amrish Purohit

  • A report that lists all non-exempt employees that do not have a supervisor

    HI all,
    Please help. This is urgent.
    bold "A report that lists all non-exempt employees that do not have a supervisor assigned in R/3." bold
    I have already selected non-exempt employees but don't know how to select people who do not have a supervisor" What selection criteria I should choose in the ad-hoc query
    Thanks a bunch,
    Rashmi

    Hi
    Actually its not that difficult. You can give a criteria in selection where relationship A002 is equal to a space . Replace A002 in this example with the relatioship you have defined for 'Reports(line) to'.
    Regards
    Waz

  • Report to list all infotype record per employee

    Hi All
    is there a report that list all infotypes record per employee  ?
    thanks for helping
    Corinne

    Hi,
    It will not be feasible as all the IT has different fields.
    There is no standard report as Mr, Raghu mentioned.
    Ketul

Maybe you are looking for