AFS SD creat DN for no stock

Hi friends.
AFS MTO business,so I config do not use ARun.
I want to creat DN for no stock.And I close ATP check.
But I can not create DN for no stock.
So I want to know AFS can create DN for no stock.
Error text:
Order cannot be delivered (see long text)
Message no. VL461
Diagnosis
Possible reasons include:
The copy conditions specified in Specify copy control for deliveries do not allow the order to be delivered.
The order is blocked for delivery.
The order document is incomplete.
Procedure
Pay attention to any notes that may be recorded in the log.
You can display the copying requirements defined for this transaction in Customizing.

Up

Similar Messages

  • How to control "Procurement parameter" for plant stock.

    Hi everyone
    I have changed Subject and question as below;
    Our customer wants to create P.R manually before MRP running for some of reason.
    After create Project/WBS/Network/Activity and assign component to Activity,  when assign
    component to activity, set "Procurement parameter""Requisition + reservation for WBS elemen",
    then P.R is automatically created. For project stock it seems OK. However when I try to do
    same thing for plant stock, I can choose only "Reservation for network". How to control this part?
    Experts, please give me your advice.
    Regards,
    Satoru
    Edited by: Tempra Samurai on Jan 23, 2010 12:37 AM

    Hi,
    Create a Procurement Key in OPS8 and under Priorities give Priority 1 to Plant stock and 2 to Project Stock.
    So attach a material to Activity in CJ20N a reservation will be created without AcctAssgcat Q ,Special Stock Q.
    Here in this case you can directly issue goods to project also if unrestricted stock is availabe ,here the system will consider only 281 Now.
    After you run MRP ,system will create PRs on the basis of Requirement and availabity but without the reference of WBSE because you are creating PR for Plant stock.
    Hope it is clear.
    Muzamil

  • Error in creating delivery for STO

    Hi SAP Gurus !!
    I have these errors while trying to create delivery for a Stock Transport Order between 2 plants using transaction "VL10F"
    APO: Check instructions YA / BE does not exist for loca tion product PFSIND_SM_TEST_FCO / 2383
    APO: Check mode YA and business event BE not defined                                         
    APO: Internal error: Item $ 1/000001                                                         
    Only 0,00 PC of material PFSIND_SM_TEST_FCO available                                        
    An item with no delivery quantity is not permitted. Item will be deleted.                    
    I have chcked that there is sufficient stock available at the storage location level in the supplying plant.
    Can you please help me out of this please......

    Dear,
            Please try to check whether some STO is still pending for do complete process. If there is any pending STO then stock is block for this material.
    Regards,
    Sandip Shaktavat

  • How to create an Internal Customer  for Ineterplant stock Transfer

    Daer Gurus,
    Please tell me how to create an Internal Customer for Interplant stock transfer.
    Actually I have three plants out of them two plants are providing goods to third plant. Also both the plants do the stock transfer in eachother.
    How to maintain the Two plants as supplier and third one as a receiver plant. 
    which account group I should use and what details I have to use for it ?  Do I need to maintain all three plants under same account group? I know the theoratical process only for stock transfer please guide me on this Internal customer issue.
    thanks in advance
    regards,
    Sanjay

    Hi,
    Take your three plants as AAAA, BBBB and CCCC.... and these 3 plants may be assigned to the Sales Area of AAA 10 10, BBB 10 10 and CCC 10 10.
    Your STO will have following 4 flows.
    1. AAAA - CCCC
    2. AAAA - BBBB
    3. BBBB- CCCC
    4. BBBB- AAAA
    you need to do the following settings...
    1. Assign the Sales Area for the Shipping Plants... for ex (AAAA - AAA 10 10 and BBBB - BBB 10 10)
    2. You need to Create a Internal Customer for every Rec. Plant and need to assign the same to the Rec Plant. And Also note that this customer needs to be created in the Sales Area which is assigned in the Shipping Plant.
    (Note that CCCC will be Rec Plant from Both AAAA and BBBB... So you need to extend that customer for both the Sales Area of the plants AAAA and BBBB)
    Following is the example settings required for our scenario 1.
    AAAA will be a supplying plant and CCCC will be rec. plant....  for this you need to create a internal Customer (for ex C1000) in Sales area AAA 10 10 (which is assigned to the plant AAAA) and assign the Customer number (C1000) to Plant CCCC.
    Now you created a plant CCCC as a customer in Sales Area AAA 10 10 (which is nothing but plant AAAA)...
    Also here you need assign the Sales Area AAA 10 10 to the Plant AAAA.
    Hope this will be useful to you.
    Thanks,
    Muthu

  • Reservations are not creating for a stock item PO

    Hi All,
    I have an issue with reservations for a stock material PO,
    Our's is extended classic scenario(BBP 3.0 & R/3 4.7), I have created a cart and approved the cart for a stock materials.
    As per business process, for a stock materials reservations are to be created but here after cart approval, under follow on documents tab, I am not getting any reservation details except shoopping cart number and its approval status.
    Can any one have idea on it?
    Through me some light,
    Thanks in advance,
    Govardhan,V.

    Hi. Reservations are not supported in extended classic.
    Or at least they were not when I last asked SAP about 3 years ago.
    Unless something has changed the only solution was to use the BADI BBP_EXTLOCALPO_BADI to deactivate extended classic if it is an item you want a reservation for.
    You would then end up using the classic scenario for these reservation items only.
    Regards,
    Dave.

  • Create auotmatic purchase order for non stock materials

    Hi,
    Please provide me information on how to create automtaic purchase order for non stock materials in MM system.
    Regards

    Hi,
    For automatic PO creation follow the steps.
    1) Material Master purchasing view tick automatic PO check box  (Material type NLAG)
    2) Vendor Master purchasing view tick automatic PO check box.
    3) Maintain Source list for Vendor & Material.
    4) Maintain Purchase Info Record.
    5) Create a Purchase Requisition.
    6) Use T.Code: ME59N & execute for PR for vendor, you will be able to create automatic PO.
    Note
    Ensure that Purchase Info Record should be there.
    If you have more than one vendor then fixes only one vendor in source list.
    During PR creation select source determination check box.
    SAM

  • Prevent User to create PRs. for stock materials.

    Dear All,
    How can i  restrict a user not to make PR for Stock material ? I have a Stock material type FRMT.
    please suggest me any authorisation Object or User Exit ....
    Regards,
    Pardeep malik

    Authorization process:
    In OMS2 maintain a certain value like Z01 in the field Authorization group for your Stock material type FRMT...then ask your BASIS person to use this group in authorization object
    BAdI:
    Use BAdI ME_PROCESS_REQ_CUST...here use the logic that the while creating PR system will check the MATNR & further its MTAT...if found MTAT = FRMT then it will issue a customized error message thus preventing user from saving the PR
    Regards,
    Indranil

  • Why cannot create delivery for Sales Ord in SAP, even there is enough stock

    Hello
    I am trying to create delivery for sale order. I did for some lines. But it shows meassage "An item with no delivery quantity is not permitted. Item will be deleted." for the other lines, even there is enough stock.
    Appreciate your comments:)
    BR
    Happy

    Hi Happy,
    Please refer following link for better understanding the concept and functionality :--
    Re: Schedule line control in sales order
    http://www.sapfans.com/forums/viewtopic.php?f=5&t=127586
    Re: Delivery without Sales order? If yes,how can we track those materials?
    Regards
    Rajesh

  • Can we create Physical inventory document for SO stock (E stock)?

    Hi,
    Can we create Physical inventory document, enter count, then post different for SO stock (E stock)?
    I try these, after post the different, system does not make any adjustment on my stock quantity.
    How can we do these? I wish to zerorize my SO stock quantity. It was a mistake created earlier.
    Thanks

    Hi,
    Thanks for your helps.
    I try, after I run batch input, where can I know the Physical Inventory Document created via SM35?
    And I try MI01 with indicate E special stock indicator, it allow to put SO number and SO line item.
    Can I know what is different by using MI01 and MIE1? When we will using MIE1?
    Thank you.

  • Create Outbound Delivery without Stocks

    Hello.
    Anybody with AFS experience?
    When creating outbound delivery with reference to an STO, the system allows me to allocate the full quantity (60pcs), even if the available stocks is only 40pcs.
    How is this possible?  My understanding, we will only be able to create the delivery for the available stocks.
    Help.

    Hi Gemma,
       If there are no stock at all, then you will not be able to create delivery agianst STO. If there is partail qty available, then delivery can be created. eg. if stock is 20 kg  and in the STO if the qty is 40 kg, you will still be able to create delivery, but when stock is 0 kg, you will not be able to create delivery..........it will give an error message" An item with no delivery quantity is not permitted. Item will be deleted."
    hope this helps............
    Rgds,
    Anitha J

  • Stock Ledger Report in Day Wise not giving correct values for Opening Stock

    Dear Experts,
    I m working on Sock ledger report to give the day wise data.
    since yesterdays closing Stock will become opening stock of today,
    To get Opening Stock,
    I have restricted the stock key figure with 2 variables on calday        
                                  (DATE FROM var with <=(Lessthan or equal to) and offset -1
                                   DATE TO      var with <=(Lessthan or equal to) and offset -1)
    To get Closing Stock,
    I have restricted the Stock key figure with 2 variables on calday        
                                  (DATE FROM var with <=(Lessthan or equal to)
                                   DATE TO      var with <=(Lessthan or equal to) )
    But in the output Opening stock values are not coming correctly and for given range of dates,
    for last date, opening stock is showing as Zero.
    Could you please tell me how can I achieve the correct values for opening stock.
    Thanks in advance.

    Hi Arjun,
    Seems like you are making it more complicated. What is your selection screen criteria?
    Ideally you should only use the offset.
    You will have say Calday in rows and stock in Column
    ____________Opening Stock_____________Closing Stock
    01/06/2009___(Closing stock of 31/05/2009)_(Stock of 01/06/2009)
    02/06/2009___(Closing stock of 01/06/2009)_(Stock of 02/06/2009)
    03/06/2009___(Closing stock of 02/06/2009)_(Stock of 03/06/2009)
    So, from above scenario, create one RKFs and include Calday in it. Create a replacement path variable on calday and apply the offset as -1.
    So, your Opening Stock will be calculated by closign stock of previous day.
    - Danny

  • T Code for Project Stock for a particular period

    I want to check my project stock for a particular period, is there any Standard T Code, if not how to find the solution. Please revert me the solution.
                                                                                    Thank you.

    Hi
    Please check the following Report
    S_P00_07000140 - Inventory and Raw Material for Special Stock Report
    To access the report, from the SAP Easy Access menu, choose Accounting >> Financial Accounting >> General Ledger >> Reporting >> Tax Reports >> Thailand >> Inventory and Raw Material for Special Stock Report
    OR
    please try to create a Query by using the following tables..
    MSPR
    MARA
    MAKT
    Tnx.
    Abdul

  • Z table for Closing Stock

    Hi ,
    My  requirement is to make Z table for closing stock.
    As ours is a pharma firm  and we have implemented SAP in Aug 2008.
    Now for  closing stk  we are using S033 and MSEG table to get opening stk
    SELECT SUM( mzubb ) SUM( magbb ) INTO (w_dr_menge , w_cr_menge)
            FROM s033
           WHERE sptag < so_fkdat-low
             AND werks = werks
             AND matnr = matnr.
      w_opening_balance = w_dr_menge - w_cr_menge.
    and for closing stk = opening stk - sale + receive.
    Now the problem is  when we want to retrieve data for closing stk for last month ,it is checking all the records since Aug 2008  for opening stk and it is taking too much time to retrieve data.
    Can anyone plz suggest any alternative for thsi problem.
    I will really appriciate your help.
    Regards,
    Archana

    Hi
    done this before. for sure you will experience an performance problem in your current setup. what we did is we create a program that calculates the ending inventory of the month then beginning inventory of the following month we are executing this in every end of the month. In that case when we need to access the previous month the ztable must be use. make sure that your program can do rerun of the ending and beginning of stock because there are chances of previous posting of reversals.
    Thanks,
    Best regards,
    Etrafanob

  • Adding Cost of Sales for Non-Stock articles to POS Inbound Pricing Schema

    Hi guys
    I'm working on a requirement to derive the Cost of Sales for non-stock items by pulling the current cost for the site and multiplying it by the billed quantity on VBRP. We could create a new condition type using purchase org, article and site in the condition table and manually enter condition records. However it would be more elegant to copy prices from the Purchasing list or deal prices into new condition types in the POS inbound pricing procedure. However SAP standard doesn't seem to allow condition copying from purchasing to sales.
    Regards
    Brett

    Hi ,
    As it happens you need to do this for Non-Stock Articles only.... then you need a routine to do this .
    And then in IS -Retail do  we not use  NETPrice or Final Cost Price to derive the Sales Price ... In that case you get the Cost Price when the Billing doc is getting posted at line level...
    Regards
    Amitava

  • Excise invoice issue for non stock orders

    Hi,
    We are unable to create excise invoice for non stock materials. When we try to create excise invoice with refernce to the billing document, the following error appears (message no 81681: reference document of 2917 is not delivery document). This process was working properly before updating patches, but after the updation, we are not able to generate excise invoice for non stock materials. (FYI: In the case of non stock order we are using order related billing). Any solution to resolve this error??
    regards
    John
    Edited by: Gino12 on Oct 28, 2010 10:00 AM

    For sales with material type NLAG, Item category TAX and schedule line category CX contain the standard settings along with copy control settings (VTFL, item level requirement 004) that suit your case.

Maybe you are looking for