After replace the ATX case for K7T Turbo2 mainboard???

hi, Master outhere help plz...
after replace the ATX case for K7T Turbo2 mainboard??? why not boot up on screen any more , but power running is ok for the CPU fan , if i forgot any thing from this stage plz guide me the step.
thank for kindly supports soon...

psu max amps better than in old case ?
got to many stand offs under the board shorting it out ?

Similar Messages

If i want to replace the back case for an iphone 3g and i provide the back case, will Apple do the actual replacement for me?

The black back case on my iphone 3g is cracked. i would like to replace the back case with a new white one. I saw the video on how to do the replacement on youtube and found it complicated. if i take the new back case and the phone to Apple, will the replace the broken back case for me?

Regarding the iPhone 3G, the only repair that Apple Genius does on that device is the Front Screen Replacement. So they could help you get the front assembly back on when you are done with the repair. To give you a better idea, the Genius do not even replace the battery on the iPhone 3G. Apple will not help you with this repair.

Anybody have problems restoring Iphone 4 for verizon after replacing the LCD

anybody have problems restoring Iphone 4 for verizon after replacing the LCD

i didnt replace the screen on my verizon iphone, but i have had several problems in the past with restoring, however they are always easily solved for me by plugging into another computer and restoring from there once its restored off that computer you can then plug back into your computer and put your info back on.
also remember to copy the ipsw from your iphone software updates folder onto a flash drive and onto the computer you are using to update to save yourself form downloading the ipsw on that computer (if it is not already on that computer). then just do an option restore by holding option key when you hit restore and select the ipsw you want to restore to.
hope this helps

After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and itunes, it seems that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior..

After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and my ipod (Classic 160gb) it would seem that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior to the original harddrive's failure for Tiger OSX 10.4.11
Any ideas on the subject would be most helpful
Thanks in advance
Dingoh

The last security update released for Tiger users was the 2009-005 update. The latest version of QuickTime is 7.6.4. The last version of iTunes that can run on Tiger is 9.2.1, because 10.0 only supports Mac OS X Leopard and later.
So, are you on version 9.2.1?
Was it Tiger or Leopard you had on the drive before?
iTunes 9.2.1 download...
http://support.apple.com/kb/DL1056

Why do we have to replace the top case to replace a keyboard?

I see replacement keyboards sold all over the place online which means they must be able to com apart from the case. If this wasn't possible then why are these parts for sale and who are they intended for? People keep saying that you must replace the top case but you can buy just the keyboard from many sources. Can someone clear this up please? There wouldn't be a market for just the keyboad if you couldn't do it, so it's hard to believe it can't be done.....

Found two places on ifixit that explain how to do this... for anyone that may be looking for the same answer. You do NOT have to replace the entire upper case

I question for the people's out there who have the silicone case for the Micro, aka Rhino Sk

I have the silicone case too, aka Rhino skin.
what i was wondering, do you us the black belt clip that comes with it's
the reason i ask is because i used it once just to try it out. it seems like when ever you press down on it so you can clip it to your side, It's like it is putting to much pressure on the micro battery cover. what do you think? do you use you belt clip that came with your silicone case?
also i ended up with some fresh scratches.
do you use your belt clip that came with your rhino case?

Umm, well, I have a silicone case, but it didn't come with a belt clip, unless your talking about the hardcase that came with the micro.
If that's what your'e reffering to, no, I don't do that. I tried putting it in after it was in the silicone case, but once I saw that it didn't fit in directly and that I would have to add pressure, I didn't bother. I keep my Zen Micro in the silicone case, and then I put them in an altoids box. I have some soft cusion thingy on the inside of the lid so that my screen won't scrath, and I drilled a hole on the side of the altoids case for headphone/usb jack.

My hp 7160 wants to print in black only after replacing the yellow cartridge. Any suggestions?

My hp 7160 wants to print in black only after replacing the yellow cartridge. Ink level shows full amount. Test page prints fine.
I have tried different programs to color print in, all return the same error message.

Hi @obxgirl,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Replacing the bottom case on my 1.33 PB

I just replaced the screen on my PB.I just picked up a mint condition bottom case
{My bottom case is in bad shape} I checked my iFixit.com and cannot find a guide on how to replace the bottom case.Any ideas? Thanks

Cornelius-
I forgot to say that usually I put full links because it's easier for people to see that what's being posted is a link that they need to go to. Also helps them visualize what the link is for future reference. I know you've seen some of my old posts where I do utilize embedded links instead of putting the huge/long web addresses.
For instance, I could easily say, "Go look at this LINK for more info." They'd click on the word thread and never make a connection. Some may miss it altogether, overlooking the fact that it is a link. Those that notice it won't have a reference point going into the page. It'd be better to have something to look at.
Like, go to this link for more information:
http://discussions.apple.com/thread.jspa?messageID=6454427
Or even, see the following link, "Thermal Paste Thermal Tape Question Logic Board" for more information.
You can see that in this, case, the link doesn't really present an issue because it's not long. And I don't think, for the times I haven't used the HREF method, that I've put drastically long links that wrap the page. (Also, I e-mailed you earlier about something, in case you don't check, if you know what I mean).
=)
Message was edited by: Pismo 900
By the way, that thread may be of help when replacing the bottom case, since you'll need thermal paste and Kapton tape on hand, even a spudger--Apple "black stick"--during the installation process.
(And we might be reminded, you and I, of going off topic. And we wouldn't want that now, would we?).

Replacing the upper case?

I had some problems with a bad tech about a year ago on my MBP (mid 2010, unibody), where one of the rubber feet came off, and I took it into the apple store. They decided to replace them for free for me, but in the process dented the unibody lower case so that the bottom does not fit perfectly. Well, they didn't record this, and then told me I would have to pay to fix it and my computer was out of warranty.
In any case, I have just delt with it since, but now, I was thinking that I may just replace the bottom case myself, but can't seem to find anything to tell me the right way to take it apart so that I don't damage anything. I've found some of the cases, online, for around $100, and when I went to the apple store, they told me it was several hundred dollars.
Besides all of my frustration in this not being my fault, I am trying to decide what is my best course of action here. To buy a case and install it myself, or just to sell it (computer works fine, has Mountain Lion, no damage to screen, just some scratches on the bottom of the case, and the dent mentioned), and buy a newer one. Just not sure how much I would get for it, now.

Lower case/ feet: http://support.apple.com/kb/HT5236
upper case youtube: http://www.youtube.com/watch?v=B3oGp1IaQIM
uppercase ifixit: http://www.ifixit.com/Guide/Replacing+MacBook+Pro+15-Inch+Unibody+Mid+2010+Upper +Case/3105/1
sell your Mac: http://www.sellyourmac.com/sell-your-used-mac.html

What is the best way to replace the Inline Views for better performance ?

Hi,
I am using Oracle 9i ,
What is the best way to replace the Inline Views for better performance. I see there are lot of performance lacking with Inline views in my queries.
Please suggest.
Raj

WITH plus /*+ MATERIALIZE */ hint can do good to you.
see below the test case.
SQL> create table hx_my_tbl as select level id, 'karthick' name from dual connect by level <= 5
2 /
Table created.
SQL> insert into hx_my_tbl select level id, 'vimal' name from dual connect by level <= 5
2 /
5 rows created.
SQL> create index hx_my_tbl_idx on hx_my_tbl(id)
2 /
Index created.
SQL> commit;
Commit complete.
SQL> exec dbms_stats.gather_table_stats(user,'hx_my_tbl',cascade=>true)
PL/SQL procedure successfully completed.
Now this a normal inline view
SQL> select a.id, b.id, a.name, b.name
2 from (select id, name from hx_my_tbl where id = 1) a,
3 (select id, name from hx_my_tbl where id = 1) b
4 where a.id = b.id
5 and a.name <> b.name
6 /
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=7 Card=2 Bytes=48)
1 0 HASH JOIN (Cost=7 Card=2 Bytes=48)
2 1 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
3 2 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
4 1 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
5 4 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
Now i use the with with the materialize hint
SQL> with my_view as (select /*+ MATERIALIZE */ id, name from hx_my_tbl where id = 1)
2 select a.id, b.id, a.name, b.name
3 from my_view a,
4 my_view b
5 where a.id = b.id
6 and a.name <> b.name
7 /
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=8 Card=1 Bytes=46)
1 0 TEMP TABLE TRANSFORMATION
2 1 LOAD AS SELECT
3 2 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
4 3 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
5 1 HASH JOIN (Cost=5 Card=1 Bytes=46)
6 5 VIEW (Cost=2 Card=2 Bytes=46)
7 6 TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6967_3C610F9' (TABLE (TEMP)) (Cost=2 Card=2 Bytes=24)
8 5 VIEW (Cost=2 Card=2 Bytes=46)
9 8 TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6967_3C610F9' (TABLE (TEMP)) (Cost=2 Card=2 Bytes=24)
here you can see the table is accessed only once then only the result set generated by the WITH is accessed.
Thanks,
Karthick.

High temperature after replacing the CPU T2500 - T7200 in T60

After replacing the CPU from T2500 to T7200 CPU temperature ranges from 70-85C. It seems to me high, I think about replacing thermal grease or thermal paste application. What's better? Do away with the original gray ribbon and attach a new heatsink or better smear toothpaste?
Solved!
Go to Solution.

orion9727 wrote:
there was a test done and toothpaste came out close to most themal paste.
artic 5 should never be used in a laptop.
it silver and thats a no no on mobile cpu.
use a non conductive one or a thermal pad.
the gray ribbon is a themal pad best to use WHAT CAME IN IT.
reason is that can be a shim and do away with that and no contact.
you went from a 31 watt to a 34 watt TDP not alot but it gonna run hot.
75-80 c is hot yea but you have 65nm cpu class thats gonna run hot because it old and getting a lot of work.
so you all know toothpaste might been used in tests but i not use because it can dry out and you dont know whats in in exacly.
thermal wise i do belive whats in toothpaste is very good thermal wise but stick with the gray ribbon.
Please disregard the above post(er).
I've used AS5 on thousands of ThinkPads with no ill effects, actually the exact opposite. Minimal research of experiences posted by other owners on Bill Morrow's ThinkPad Forum will confirm this statement as well. Arctic Silver is as good as it gets unless one wants to spend $50 for a tube of thermal paste.
To OP, your machine is running way too hot for the CPU in question. My 15" T60p with T7600 idles under 50 degrees C, and doesn't go over 62 in normal use. And yes, it has AS5 in it.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

IPad Air won't turn on after opening the smart case

iPad Air won't turn on after opening the smart case cover, it does not do it all the time but enough to concern me

Take both the iPad and the Smart Cover back to where you bought them for an evaluation. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Replaced the bottom case on MBP (2006)...now screen is blank!? Need help ASAP...please!

I just replaced the bottom case on my 2006 MBP (model A1211). I previously replaced the top case, optical, and disk drives and all has been running as good as new for months. I used the instructions on ifixit.com to replace the bottom case, following the instructions exactly. Now when I go to turn the computer on, the screen doesn't turn on. I thought maybe a connection or screw was loose, so I disconnected and reconnected everything. All connections are tight, no screws are loose or missing. What am *I* missing??

Nothing at all, guys? This has to be fairly common and I'm just missing something obvious?

Cooling fans constantly run @ full speed after replacing the upper CPU??

After replacing the upper CPU on a Power Mac G5 (June 2004), Dual 1.8Ghz PowerPC, model M9454LL/A, all the cooling fans constantly run at full speed. All other operations are normal.
I've read, "...after replacing or switching CPU locations the Logic Board doesn't properly recognize the CPU's in their new location and a "Thermal Calibration" is needed". Could a "Thermal Calibration" possibly correct the constant full fan speed issue?
What software would be required?

Hi-
Could a "Thermal Calibration" possibly correct the constant full fan speed issue?
Yes.
What software would be required?
The Apple Service Diagnostic disc (ASD) of the proper version for your machine.
Call an authorized Apple service provider and arrange a calibration, as the disc is not readily available to individuals.

Any have an idea of cost to replace the gold case on a 5s?

Anyone have an idea of cost to replace the gold case on a 5s?

Apple doesn't replace the case or sell the parts. Your only option with Apple is to replace the phone. The out-of-warranty replacement cost with a refurb unit for the 5s is $269 (in the USA)

After replace the ATX case for K7T Turbo2 mainboard???

Similar Messages

Maybe you are looking for