After UD system is generating one new Batch??

Dear All,
I am facing a unique problem as below
After UD system is generating one new Batch, and the Initial batch is disappearing.
i.e While MIGO Batch is X, after UD it become Y, X is disappearing from system.
How we can solve this? Please let me know the possible reason for this.
Thanks & Regards
Kundan Kumar

Hi,
This is working after selecting No creation for movement type.
But I am surprised to see that we have the similar settings in Quality and Production server. But I am facing this problem in Dev Only. Please let me know why it is so? n let me know is there any other place where we maintain similar settings for movement type.
Thanks & Regards
Kundan Kumar

Similar Messages

When I atempt to send a web site via an email from FF, the system keeps opening one new mozalla screen after another. Nothing will stop this but logging off. I have to bookmark everything and then put it in an email. Your help is appreciated.

If I attempt to send a link to someone from a site I am visiting, ff starts opening one new start window after another. So fast i can't get it stopped. Even going into taskmaster which I sometimes have to try 3 or 4 times, it is impossible to get them all stopped they just keep multiplying. Only logging off or a restart will fix the problem.
The same think happens if I use a "send picture to". I don't know what else to do. I have run all the diagnostics I have. Checked all the drives, etc. Check all the ff settings. Nothing shows.

http://support.mozilla.com/en-US/kb/Managing+file+types
Don't set Firefox for '''mailto'''. <br />
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

Faulty Windows after 'successful' System Image restore to new hard drive.

This question posted as ' Cut down Win 7 after System Image restore to new HDD' in the community but no satisfactory answer. Please may I ask here.
Win reported a successful System Image creation of C: on my E: drive. C was replaced with a new 2TB drive (previously 1.5Tb) and the image restored. Win reported 'successful' restoration of C: immediately followed by the common 'You must restart
your computer to apply these changes...' which I assumed was just Win taking note of the new drive.
On running, everything seems fine at first but you start to notice faults. Most importantly Win doesn't seem to recognise itself. If you start some of the functions in control panel (eg System Manager) you get a message from User Account
Control 'Do you want to allow the following program from an unknown publisher to make changes to this computer?'.
Windows Live Mail won't work. You get a message 'Windows Live Mail could not be started. Closing Windows Live Mail. Your calendar contains corrupt data that is forcing Windows Live Mail to close (0x8E5E0247).' I have never used the
calendar function so there shouldn't be any data there.
Browsing history in IE is there on very first opening but is immediately lost and never recovered. Favourites are intact but all login details are lost. All your internet feeds are lost. Message 'The feed download was interrupted.....'
Trying to create new feeds is unsuccessful.    When you try and download something the usual IE message 'Do you want to run or save ... ' comes up at the bottom of the screen but the buttons do not work so you cannot get any downloads.
Installed non-Windows applications do seem to run OK though I usually switch back to the original drive pretty quick.
2 x Dell Precision T5500 desktops, both reasonably high spec and more or less identical though one is nearly 3 years old and the other approaching 4. Both Win7 x64. The fault identical on both machines. I have had these drives in and out
so many times trying to solve this there is a real risk of damaging the disk or lead. Can anyone suggest what might be wrong or how Win could be fixed?? I assume 2Tb is ok. Is it normal to get a restart message after a 'Successful' image
restore message. I've tried cloning the drive as well but got exactly the same messages and faults. Next I was going to try creating the image after running something like EndItAll and then seeing if the image would restore more successfully
to a different 1.5Tb drive though I don't see this should make any difference. 'Clutching at straws' comes to mind.
Thanks.

Hello, thanks for your interest.
Yes, principally it's the Windows features which are faulty. It's not that they don't work at all (except for win live mail which gives that message about being forced to shutdown), rather that there are faulty features.
All of the functions in control panel, for example, work OK. But when you select them there is this message from user account control ' Do you want to allow the following program from an unknown publisher to make changes to this computer'.   It
then goes on to give details the oddity being that the publisher is listed as 'Unknown'. This is the standard User Account Control dialogue but the strange thing is that it is not recognising the functions coming with windows.    If you
click yes it goes on to open device manager or whichever one it was that you wanted and the function works quite normally.
Non windows applications (including Microsoft Office) run normally without the user account control dialogue. The only oddity I noticed today was that one program seemed to have lost it's licencing information and gave a message that the
month trial period was up with an invitation to licence.
Today I tried to restore an image to a replacement 1.5TB disc. (i.e. the same size as the image was made from). The whole process went quite smoothly and Windows seemed to be working without the faults on the replacement drive.     So
having shown that the image must be OK I tried swapping the 1.5 drive for the 2Tb drive and repeating the restore from the same image.   Immediately on running, Windows gave me the message 'You must restart the computer to apply these changes....
(which it had not done for the 1.5Tb restoration) and all the old faults were back.   The message might be quite innocent and simply indicate that Windows is taking note or the different size drive but it seems to be associated with the arrival of
the faults. (The new drive is formatted as for the 1.5Tb with C: and Recovery partitions and the extra space left unallocated).
No, I have not tried Reinstalling Windows Live Mail yet. Today I was working on the newer machine and my mail is on the older one. It is odd that both machines show exactly the same problem. It must be something to do with the move to a different size disk.   I
guess I would have to reinstall IE as well as that was the other application that was really faulty.
Yes, that is the thread I tried in the community but I didn't get any solution.

Does SSRS Cache report generate a new cache automatically after expiration?

When you cache a report in SSRS 2008 and set it to expire after a number of minutes, for example 30 minutes, Does the report refresh after it expires and generate a new cached report automatically or it refreshes only when the report is requested or run?
For example, if I run the report at 10:00AM, it will expire at 10:30AM, then when someone else runs the report at 11:15AM, Will there have been a new Cached report or it will be processed as new(in other words, it is not based on a Cached report)?
Thanks!

Hi,
When the expire time is reached, the new cache will not be created until the next time the report is requested.
If someone runs the report at 11:15AM, the last used time would be 11:15AM and it will be expired at11:20AM. There is no cached report, unless you have a cache refreah plan.
You can check the ExecutionCache table in the ReportServerTempDB to verify if a new cache is created or not.
Reference:
Caching Reports (SSRS)
http://technet.microsoft.com/EN-US/library/ms155927.aspx
Thanks.
Tracy Cai
TechNet Community Support

Creation of new batch while transfer posting

Dear Experts,
Please guide me to meet the following requirement:
I am posting the Goods Receipt for the production order to the Quality stock by using indicator X in T Code MB31. The material is batch Managed and QM is not implemented.
Now after the Quality Inspection this batch is posted to Un-restricted Stock with movement type 321. Here the requirement is to create a new batch whereas system is setting the original batch (batch in QI stock) as receiving batch. My requirement is to have a new batch number here either automatically (incremental for internal number range) or could be entered manually.
But when I enter a new batch number the system throws an error message "Batch MATERIAL_NUMBER PLANT SLOC BATCH_NUM does not exist". Message no. M7042. The requirement is to post the stock to a new batch here.
Experts, kindly help me clear my understanding as where I am going wrong. How to be able to create a new batch here. Also how to generate a new batch number automatically during the goods movement.
Thanks & Regards,
Rohit.

Hi Rohit,
Sometime back, I have copied the below information from this forum for ref. Just check the usefulness of this information for your requirement.
You can further enquire about this with other gurus in this forum, before taking any decision.
Configure Customer Exits for intern. batch number assignment
You can use SAP enhancement SAPLV01Z for internal batch number assignment. This enhancement contains two function module exits that you can use to define number ranges or templates for batch numbers.
u2022 EXIT_SAPLV01Z_001. You use this exit to replace the number range object and/or interval proposed by the system with your own number range object and/or interval.
In addition, you can, for instance, stop the system from assigning an internal number depending on the material or plant. You can also use this exit to stop the dialog box from appearing.
u2022 EXIT_SAPLV01Z_002. Using this exit, you can either change the number assigned by the system, or assign your own number.
Note
Both exits contain a communication structure with application data from the respective business transaction (plant or material type, for example). If you need further information, such as the time, the user name or the date, you must include them yourself in one of the exits.
The system always checks whether the assigned batch number already exists in the system. If it does, it terminates the function without assigning a batch number.
Example
In function module exit EXIT_SAPLV01Z_001, the system uses the material type to determine number range interval XY. This number range is then used to determine number 0000100123 as the next batch number .
In function module exit EXIT_SAPLV01Z_002, the final batch number 'ABCD100123' is determined from batch number 0000100123 and plant ABCD. The system suppresses the leading zeros.
If you do not use a sequential counter for the batch number, you can skip internal number assignment in exit EXIT_SAPLV01Z_001 to specify your own batch number in exit EXIT_SAPLV01Z_002.
Activities
1. Implement the required enhancement.
Either create a new project or use an existing one.
2. Activate the project.
Your enhancement works only after the project has been activated.
Madhava

Stock transfer of QM stock thereby creating a new batch number

Dear Experts,
I have searched for this content but didn't get content which match my requirement.
My client has placed a requirement.When they receive a material against a purchase order through movement type 101 they receive it to quality inspection stock.After quality inspection this material is taken to unrestricted area through movement type 321.
Now after this material comes to unrestricted area,this material is again subject to quality inspection.Quality testing is done after a particular period.
Next quality testing date is calculated based on this formula:-321 movement type posting date + quality inspection interval days maintained in material master.
i.e:-If for a material 321 movement type is 16th July 2014 & if quality inspection interval days for that material is maintained as 365 days then next quality inspection of that material will be after a year.
Now client has placed a requirement when this material comes to quality testing,15 days prior to quality testing this material should move to quality inspection area from the present unrestricted area thereby generating new batch number for that material.
This changes the client will view in MMBE.
Gurus Please help as I'm new to QM.
Kind regards,
Pradeesh.P

Hi,
This is not possible,you cannot generate a new batch number through recurring inspection.
If you require a new batch number then during stock posting in UD you post it to new material,in your
case this will be the same materiaal and you give new batch number.
In this way a batch material has come for inspection and after inspecting it you are changing the
batch number of the material.
CSN

System is generated extra line item of G/L while clearing throgh F-44

Dear Experts ,
When we processing clearing through F-44 , system is generating one extra line item of G/L , due to this system is not allowing for clearing as the message " Posting is only possible with zero balance ; correct document " is served by system.
Actually while clearing , i am including TDS clearing document (posted via F-54) also .
please suggest.
Thanks & Regards
Shailesh

Hi
1. First of all i have given advance to vendor with deducting TDS (@10%) via F-48
2. after that i have raised one invoice for same vendor with deducting TDS via FB60
3. vendor TDS clearing via F-54
4. now when i going for vendor clearing via F-44 with taking reference from above F-54 document
i got below error :

Generate a new version for PO header text change

Hi,
Could you pls instruct me the configuration settings to generate a new version for PO header text change? I secceeded in other fields, e.g. Inco Term, Order Qty, Delivery date, but failed in header and Item Text.
I added STXH_TDNAME but it doesn't work. Thanks!
Regards
Jully

Hi,
Thank you very for the feedback.
The 4th point of note 664928 says "This is not a change to print-relevant texts". I assume there is a way to configure the text as a "print-relevant text" and I confirmed my texted is configured for printing for operation 1 & 2 (create and change order) in:
MM > Purchasing > Messages > Texts for Messages > Define Texts for Purchase Order.
Still not working. Any idea? Do I miss anything? Thanks!
QUOTE of note 664928 :
Question:
You change the texts in a purchase requisition or a purchasing document. Why does the system not generate a new version?
Answer:
This is not a change to print-relevant texts.
Regards,
Jully

New batch creation during mvt 309 via MIGO

Hi,
I'm doing a transfer posting material to material (movement type 309). I want the system to automatically create a new batch (for the receiving material).
I've set in OMJJ for movement type 309 to create batch automatic/manual without check
I've also set M7199 from "W" to "E".
Once that was done, using MB1B, the system was able to automatically create a new batch for me based on the internal batch number range. However, when i tried the same movement using MIGO, it doesnt work. in MIGO, system always populate the "from" batch into the "dest" batch field.
Is there any way i can set so that in MIGO, the system to propose a new batch?
many thanks in advance

Possibly, have a look at OSS 748216.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=748216
Regards,
Nick

Windows Update only find one new update when sytem loading

Hello
My client use windows 7 sp1 and it connects to wsus server for updates.
every time, wsus updated.
when my client system boot, only one new update downloaded from wsus.
other clients no problem.
With thanks

Hi Mehrzad,
Please follow the steps mentioned in the below article:
Troubleshoot Problems with the Windows Update Client
Any update, please feel free to post here.
Best regards
Michael Shao
TechNet Community Support

After transported work flow changes, 2 new inactive versions generated

Dear ABAP consultants,
I have generated new version in my development system and saved under the workbench TR, then have modified my workflow changes and activated the active version and release the sub tasks of Workbench TR and ask my basis to release and Transport TR.
After they imported TR, there is an error logs: Object type Z_proposal could not be generated.
And in target system, 2 workflow versions got generated.
Please help me on this.
Thanks
ANIL

Thanks for reply.
I have got issues and resolved.
--> I have missed out event Linkage between BOR to Workflow.
--> And also Z_proposal having some error in quality system, because of one structure used in Z_proposal object not found in my Quality system.
Regards
Anil Dasari

System shud not allow for batch change after bacth determiantion.

Dear ALL,
I have one Isuue at my client , there requiremtn is -
"Performing the process it was detected that the raw material and packaging material batches could be changed after the process order created, which allows to picking a batch instead FEFO. "
Is there any way that system not allow for any change related to batch and its qunitity.
Awaiting for fevorable respoce.
Regards,
Prerna Verma

Hi Prerena,
Activating Check Batch Tab in COR4 will performs an additional check in order itself.This check works after completing Batch Determination.For example during Batch Determination system has selected (as per your sort rule) Batch X for issue.But later User tries to change this Batch No. to Batch Y(by overwriting the batch no. in Batch field).But if you have activated this Check Batch function then system will perform the check immediately whether this new Batch complies the Batch Determination rule or not.And if found wrong then gives you an error or warning msg(depends oin your msg control).
my second point is regarding Transaction code COB1 to deactivate the Allow change function.See if you activate the this tab then you finds that qty fields editable during Batch determination.So you can change the qty. manually during batch detemination.
So in your case 2 level checks required.
1) During Batch Determination (COB1) - Deactivate Allow change
2) After Batch Determination(COR4) - Activate Check Batch
Regards,
Dhaval
Edited by: Dhaval on Sep 27, 2010 8:43 PM

My original Apple ID is associated with an email address that I no longer have access to. How do I reset the system to recognize my new email address as my primary point of contact and erase the other one?

My original Apple ID is associated with an email address that I no longer have access to. How do I reset the system to recognize my new email address as my primary point of contact and erase the other one?

If when you go to icloud.com and sign in with your current iCloud ID you see all your iCloud data there, you can safely sign out of the iCloud account on your Mac and choose Delete at all the prompts, then sign back in with the current ID. This only deletes the data from your Mac, not from iCloud. Your iCloud data will reappear on your Mac when you sign back in after a brief delay as it redownloads. If you have automatically imported your photo stream photos to your iPhoto library you won't lose them either (if you haven't, save them to your library first).
Again, only do this if when you go to icloud.com with your current ID you see your iCloud data there.

Capturing information that one new employee has joined in the system

Hi
How do I capture the information that one new employee has been joined in the system. Apart form per_all_people_f is there any table or some event that occures after joining the employee.

Hi
When a new employee comes into system a record will be created in per_all_people_f table thereby, telling the system of a creation of an employee.
You can write a sql query which will check for new creation of records in papf table checking conditions with sysdate.So if in future any employee comes into
system, an alert can be fired as per the requirement.
Thanks

How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album :)?

How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album, i want them in the camera roll ?

How can I delete EVERY THING off my Mac and have it like new?
Boot from the software install DVD and do an "erase and install" when prompted.

After UD system is generating one new Batch??

Similar Messages

Maybe you are looking for