After updates the "preview" window is "hazy" CS 4.2.1

I worked with some .DV files the other day without any issues. Today I applied all updates to Adobe and now the same project that worked just fine the other day is acting weird. The preview video has what looks like a hazy on it and it when previewing a video the sounds works just fine but the video goes to black.
Any ideas. I was going to use windows restore to roll my computer back a few days but it was turned off.
Thanks
Jared

If you sure the update is to blame, just un-install your suite, run Clean CS4 a couple of times, and re-install. Turn your auto Adobe updates off so you can pick and choose the updates you want to apply.
Are you, by any chance, also running after effects??
Matthew

Similar Messages

Updating Output Preview window

Hello. I have a problem with output preview window. I found the thread with the same question: How to update Output Preview window? . But there are no answers. May be anybody can answer now.
Thank you.

I sent "PDPageNotifyContentsDidChange" notification. It helps to show new element with this colorant in document, but not in OP window.
It is very srange behavior. If you open OP window after adding colorant, OP window show it. If change Simulation Profile from CMYK to RGB (or RGB to CMYK or GS ets.) new colorant will appeared. Workaround: Maybe it posible to change this profile programmatically?
If you open OP window then change in preferences default working space and then open OP window again Simulation Profile won't be changed.

I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?

I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Problem with the preview window in Premiere Elements 10

Hi guys,
I have a question:
I have a new PC (data follow) and Adobe Premiere Elements 10.
My problem is that I see in the preview-window only one grey picture. The sound runs without problems! In other chats I red, that perhaps my graphic card is the reson of my problam. Is this thus? If so, how I can repair this?
PC:
AMD FX-8350 Eight Core Processor 4 GHrz
NVIDIA GeForce GTX 750 Ti
Do you need even more?
What I have already tried:
- Adobe Premiere Elements 10 anew inst.
- Graphics drivers update
- Check DirectX
- Windows Media Player and QuickTimePlayer anew Inst.
Already to many thanks for your help!!!!!
lg
Börni

borni123
What computer operating system is your Premiere Elements 10 to run on?
You are involved in the Premiere Elements 10/NVIDIA GeForce issue whose full details (description and fix) are included
in the Announcement at the top of this forum. Copy for your convenience below.
You gave a lot of details but did not include the computer operating system. This information may be the key whether
the known fix will work for you. The known fix requires roll back of the driver version to about May 2013. If your computer
is Windows 8 or 8.1 64 bit, there may not be a driver old enough to resolve the issue. This may force you consider
a Premiere Elements version other than 10 or a different video card/graphics card for your computer. This issue is
specific for Premiere Elements 10 and the NVIDIA GeForce cards.
Copy of Announcement at top of this forum....
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this
applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary
to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working
Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is
expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver
roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
The following is the specific link in the above for determining what older NVIDIA GeForce GTX750Ti driver versions are
available to you.
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
Please update us on your progress,
Thank you.
ATR

Is the Preview Window always an accurate representation?

CS3. Two issues:
1.
1920x1080 menu with 1920x1080 motion background(mpeg file). The menu file has an outline as well as drop shadow effect created in Photoshop.
However, in the preview window, the outline and drop shadow look different(see example). I realize I could get rid of the problem by collapsing the effect in Photoshop, but why do I have to? Some kind of scaling issue........?
2.
I have a motion background to the menu. What's moving is a little circular blade to the left of play movie, which spins. It makes 2 complete circles in 20 frames. The 11th and 21 frames would look like the first. ( The reason the background movie is 2 complete spins looping(instead of one) is that Encore won't use any movie less than .4 seconds as a menu background.)
Anyway, the preview window doesn't show a smooth looping spinning blade. It kind of starts again after 20 frames of looping instead of going on continiously "forever", which is what I want. OR is this just a preview window problem which will go away at burning time.
Any ideas?

Thanks for the title remote info. I ended up linking it to the main menu. It plays exactly the same.
The Transition Movie DOES play if my burned DVD plays in my laptop computer's internal DVD player. It also plays unburned within the project/within the preview window in Encore.
The very same DVD does NOT play the Transition Movie if I place it in the external "traditional" non-computer DVD that is hooked up to my 32 inch LCD TV set. It skips over the transitional movie and goes right to the regular movie. It's like my TV's DVD player ignores it(the transitional movie).
So my transitional movie DOES play:
1. As part of the project, unburned , and in the Encore preview window.
2. After burned onto disk and on my laptops internal DVD player.
Transition movie does NOT play:
1. After burned and on my regular DVD player hooked up to my television

Touch pad controls disappeared after update for Bootcamp windows 7

After updating Bootcamp for Windows 7 on my MacBook Pro 13" (Mid 2009), the touchpad lost its tap functionality and there, nolonger, is a touchpad tab in the Bootcamp Manager. Is there any way to reinstate the "tap to click" function?

Thanks, but what do you mean by Windows Support Software? ... the Windows 7 drivers, Windows 7 OS, or Bootcamp for Windows 7 ?

I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Adjusting the Size of the Text in the Preview Window in RH8

Hello, Everyone!
I am new to the forum, but I've been lurking for a while.
We have upgraded from RoboHelp 7 to RoboHelp 8, and I have encountered some conversion issues. The primary layout type of the project is Microsoft HTML Help.
First, the text in the preview window is extremely small -- much too small to be useful to these old eyes. Has this changed in RoboHelp 8? Is there a setting somewhere that enables me to bump up the size of the preview text?
Also, I am encountering a number of spacing issues, including:
Extra space after an em dash (no spaces in version 7)
No space after a colon (there was a space in version 7)
Bullets display as numbers in the preview window, but seem to be OK in "live" version (bullets were fine in version 7)
Finally, we want to make this an AIR application, but the AIR option isn't available in the Single Source Layouts area for this project. When I create a new project, the AIR option is there. What am I missing?
Can anyone offer suggestions as to how I can fix these things? (I am not an "under the hood" kind of guy, so please don't assume I know a lot about the guts of RoboHelp.)
Thanks for any help you can offer!
clintfan

Hi there
When you examine the Single Source Layouts pod (View > Pods > Single Source Layouts) do you see AIR Help? If not, try right-clicking the pod and you should be able to define a new layout for AIR.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Video will not show in the preview window

I am using iMovie 08 and have some video that I pulled into iMovie using my iSight. Whenever I am trying to preview my movie it will not show in the preview window. I did a software update for iMovie and the issue is still happening. Any ideas??

Although the same not preview-able iMovie event played perfectly fine when transferred to a different mac running perian and divx, disabling Perian solved the issue on my macbook, too!
Thanks for the tip!
I still wonder why some clips preview and some don't (with perian running)...

Cannot play songs after updating the last version of iTunes

Did anybody else got the same problem?, not being able to play dowloads on your PC after updating the last version of iTunes 11.1.5.5?

Hello gtaborga,
The following article provides troubleshooting steps that can help get iTunes to play your music once more.
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Cheers,
Allen

Password problem after after updating the OS.

My iPad is asking for a password after after updating the OS.
I can no longer get in and I can't backup through iTunes.
How can I resolve this?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

After update, Creative Cloud window empty

after update, Creative Cloud window empty

Hi natzoo1964,
Please follow the mentioned steps:
Windows:
C/Users/User Name/AppData/Local/Adobe/OOBE/opm.db and delete it.
Mac:
~/Library/Application Support/Adobe/OOBE/opm.db and trash it. (http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html)
Launch CC desktop and try to sign in.
Regards,
Romit Sinha

TS1967 After 'updating' the newest iTunes version, I cannot sync my iPod Nano! It does not show up anymore.

After 'updating' the newest iTunes version, I cannot sync my iPod Nano! The 'old' version recognized and showed in icon to sync, but the newest version does not. Is there a way to sync the older iPods?

http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

[SOLVED] vi (vim) no longer works properly after updating the system

After updating the system with pacman -Syu vi stopped working. All syntax colors are gone, and everything is grey. When I press i to enter "insert" mode, editing is not visible. Changes are obscure and you can't tell what you are modifying. Quitting with :q will still prompt you to use :q! to abort changes, even if no changes were visibly made.
When scrolling to the beginning or end of a file, the screen flashes with grey glitch like areas. What happened to my vi!?!?!?!?!?
This all happened while following the beginner's guide to install arch linux. I realized this when trying to arbitrarily read a test file I made directly after updating.
The problems continued to be visible when installing and setting up sudo (those steps are the next steps that require vi)... I think the sudo installation worked... but my vi is horribly glitchy
Any ideas?
Last edited by trusktr (2010-02-19 07:19:55)

Setting EDITOR does not help in every case. For instance, visudo is by default hard linked to vi. (You can change this, I know. )
But in fact, vi is only a symlink to ex. So I simply renamed this link and put another symlink to vim (vim-big in my case since I in fact do use the gvim package).
/usr/bin/vi -> vim-big
/usr/bin/vi-simple -> ex
The drawback is that I have to set those links on every vi-update. (But I sure will remember...)
Last edited by bernarcher (2010-02-19 00:58:57)

After updating the software on my ipod touch to OS 6 it no longer works in my car

After updating the software on my ipod touch to OS 6.1.4 it no longer works in my car.

Try:
- Reset the car system
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem,then the iOS update broke compatibility. That happens sometimes.

After updates the "preview" window is "hazy" CS 4.2.1

Similar Messages

Maybe you are looking for