After upgrade to mavericks usb devices are not recognised?
After upgrade from Mountain Lion 10.8.2 to Mavericks external USB speakers do not work and HP Inkjet USB printer is not recognised in control panel.
Pls advise on fault finding solutions
Best regards
Sergey
Back up all data.
In the iCloud preference pane, uncheck the box marked Calendars & Reminders if it's checked. You may get an alert that one or more calendars will be deleted from your computer. Confirm. The calendars won't be deleted from iCloud. Leave the preference pane open.
Quit Reminders if it's running, and also quit Calendar or iCal.
Triple-click the line below on this page to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
If you unchecked the box in the iCloud preference pane, check it again and close the preference pane.
Launch Reminders and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Similar Messages
-
After upgrading to Mavericks my iMac does not see my Sony camcorder anymore. I tried the new iMovie as well as the old version 9.0.9, which is still in Applications. I checked the camcorder and connections in iMovie on my MacBook (not upgraded) and that still functions properly, so the problem does not seem to be in iMovie, old or new, or in camcorder and connection.
Anybody with the same problem or a solution?
Thanks mbkomTry this
-
Devices are not recognised.
Hello
I recently updated the latest iTunes 11.3.0.54 on my computer running windows 8 and now all my devices are not recognised or detected.
I have de-authorized the computer and re-authorized again but it did not fix the problem.
Previous to the update all my device were synced and working perfectly.
Has anybody had this problem, please help.Hi jamiefromshepparton,
Welcome to the Apple Support Communities!
I understand that after you updated iTunes on your Windows 8 computer none of your devices are recognized. Please use the following article to help you isolate and resolve this situation.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Have a great day,
Joe -
After upgrading to maverick; help & other functions not working
After upgrading to maverick; help and other functions not working?
Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
After upgrade to Maverick, Canon printer is not responding.
Hi,
I've Macbook Air connected to office network through Wifi. My Office printer such as Canon IR C4080 and Ricoh Africo SP C242DN are not responding after Maverick upgraded. I tried to install new driver but still not working. Do you have any idea to solve this problem. Now I can only direct printing via browser.
Thank you in advance
KinGGreetings!
Not sure if any one is still following this thread, but I am having the same problem with a Canon iR c2550 on one of our macs. It just pauses and will not print. We only have the ufr driver capability. Here is my printer info:
Canon iR C2550:
Status: Stopped
Print Server: Local
Driver Version: 10.3.0
Default: Yes
Shared: No
URI: ipp://101.98.226.20/
PPD: Canon iR C2550
PPD File Version: 10.3.0
PostScript Version: (3010.000) 550
(3010.000) 651
CUPS Version: 1.7.2 (cups-372.4)
Scanning support: No
Printer Commands: AutoConfigure Clean PrintSelfTestPage
CUPS filters:
capdftopdl:
Path: /Library/Printers/Canon/CUPS_Printer/Bins/capdftopdl
Permissions: rwxr-xr-x
commandfilefilter:
Path: /Library/Printers/Canon/CUPS_Printer/Bins/commandfilefilter
Permissions: rwxr-xr-x
Fax support: No
Printer utility: /Library/Printers/Canon/CUPS_Printer/Utilities/Canon Office Printer Utility.app
Printer utility version: 10.3.0
PDEs:
FinishingPDE.plugin:
Sandbox compliant: Yes
Hope this helps - it is an imac running mavericks 10.9.5
Fr. Ambrose -
We have an ERP application(openerp), where the web client was working very fine.
After one of the upgrades of firefox, some of the icons on the web page that should open a sub-page for selection of items in the main page are not working any more. We click on them, yet no response
I donwloaded the fidler and it record any request sent from the PC when clicking those icons.
I tired internet explorer 8 and the icons are working, so it is not a server side problemHi,
There're some "known issuees" with some updates, as described in the following KB:
http://support.microsoft.com/kb/2962872/en-us
I would suggest install the update below which might solve the IE crash issue
http://support.microsoft.com/kb/2977629/en-us
Yolanda Zhu
TechNet Community Support -
After upgrading my ipad2 my apps are not working
I have recently upgraded my IPAD 2 after a long time.. but,after upgrade apps are not working!!!
Na!!! I restored factory settings.. now not able to copy aaps from itunes to IPAD
-
After upgrade attempt for 8310, device will not restart -- only blinking red light
Problem: I tried to upgrade the device software to 4.5, and now THE DEVICE WILL NOT RESTART AT ALL. Not with a hard reset. Not using the SIM and battery from my 8310 and putting it in hers. Nothing. Just a red light that blinks in a pattern: two quick blinks, then a pause; two quick blinks, then a pause, etc.
Background: This 8310 had vers. 4.2.2 device software, and something like 2.6 on the desktop. I downloaded/upgraded to 4.6 for the desktop and 4.5 for the device from the AT&T site. The Desktop manager prompted me to install the new device software... looking good. After several minutes, I got an "unknown error" message and it stopped the install.Following a support article, I uninstalled reinstalled both updates, but then the problem occurred: no NOTHING happens on the device screen at all, just the blinking red light when the device is plugged in.
The AT&T store tells me this is about the tenth "dead" Curve he's seen in about a week, apparently all occurring when folks have attempted a software updgrade. Any thoughts/help to offer?
Please help!
Solved!
Go to Solution.Check this instruction:
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry -
I upgraded iPhoto after upgrading to maverick. It will not open.
Does anyone know what to do to get iPhoto's to owrk after upgrading?
Not unless you give us some information. What happens? What error message do you? What version did you have? Do you have version 9.5 now?
LN -
(HELP!)After upgrading to Mavericks, windows xp is not working
I have upgraded to Mavericks. But now I can't get into windows xp.
what I usually do is hold on to "option" to get into XP.
instead have" MAC" " Windows" I have a third disck called " recover 10.9"
I then choose to open via Windows. It then ask me to go to safety mode or normal mode to start up.
It doesn't matter which one I chose, It will go to normally Windows openning screen and then quickly turn in to blue screen. Before I have the change to see what it says, it will go straight to restart.
How can I go back to Windows? without converting Mavericks back to my original mac version?
If the only way is to go back to my old version.
My time machine says that I don't have enough space in mac disc to do restore? if I delet everything I have in Mavericks, will it give me enough space? I have back up in time machine so it should be ok if I delet all my photos and musics.
and the most imprtant thing is will it make XP working again?I have same problem with the camera after upgrading my iphone 4 to ios 5. I can open the photoapp and focus but the app closes after the shutter goes black. I have tried reinstaling ios 5, but I still have the same problem. And I cant open the photoalbum eigther.
Can I downgrade to ios4? -
I upgraded to maverick last night and now my MacBook pro won't charge.
One thing to try is Resetting the System Management Controller .
-
Computer won't upgrade to 10.9.5 after Mavericks update.
This is all a little confusing now...let's stop and get the basics down so Chris and I are on the same sheet of paper:
What MacBook Pro do you have and how much memory and how much free space on the hard drive?
From the apple left side of the menu bar, About This Mac, More Info, System Report, Hardware and what does it show for Model Identifier?
You currently have Mac OS X 10.6.8 installed, downloaded 10.9.x from the Mac App Store? If so there should be an Installer for Mac OS X in the Finder, Applications folder if it has not yet installed. Exactly what does it give as the name for the installer and how big is it, should be a little larger than 5 GB. -
Imessaging after upgrade to 5.1.1 are not coming from right user
We have 3 iphones and an ipad on the same itunes account. We recently upgraded all three phones to the 5.1.1 and now we are having a strange problem. When I imessage it says it is coming from my daughters phone???? It seems that all three phones are showing that all imessages are coming from 1 phone. This is not good. Do I have to uninstall and reinstall everything?
This happens when multiple phones are using iMessage with the same Apple ID. Each needs to use a unique Apple ID to keep your message identities separated. On two of the phones go to Settings>Messages>Receive At, tap the Apple ID at the top, sign out, sign back in using a different ID.
-
After upgrade to Mavericks display options are no longer available
I am using a sony kde42xbr950 tv for my display for my mac mini. However, after I installed os x 10.9.4 I can't see the menu bar and neither options, resolutions below 720p, nor overscan is available to be able to fix it. I tried doing it with the tv screen options but that didn't change anything. Any suggestions? I can use it this way, but it isn't optimal.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
After updating to Mavericks, my reminders are not working?
I have update my system OS to Mavericks and my old reminders are stopped working, why this happened?
how to resolve it? why my reminders stopped?Back up all data.
In the iCloud preference pane, uncheck the box marked Calendars & Reminders if it's checked. You may get an alert that one or more calendars will be deleted from your computer. Confirm. The calendars won't be deleted from iCloud. Leave the preference pane open.
Quit Reminders if it's running, and also quit Calendar or iCal.
Triple-click the line below on this page to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
If you unchecked the box in the iCloud preference pane, check it again and close the preference pane.
Launch Reminders and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Maybe you are looking for
-
Trouble Creating PDF in Windows 7 64-bit
When right clicking a word document and choosing to convert to PDF the following error message pops up. Unable to find "Adobe PDF" printer or "Acrobat Distiller" printer. Do you want to run the installer in repair mode? Yes/No? I go ahead and say
-
Hi, I am new to dreamweaver and I need to create a site for the cafe I work for. I tried to make a form for making reservations online. I made a table and put the fileds inside it. It looks great. However, when I preview it in the browser, a javascri
-
Hi, I am not able to reboot my Mac desktop. When I switch on the Mac, I get a white screen with the Apple logo and the little rotating circle. The system refuses to boot. What can I do? Marcus
-
Hi, my airport connection will spontaneously drop a couple of times a day while I'm at work, but not on my home network. This doesn't happen to other mac (or pc) users on the same network. Could this be a problem with my hardware? Sorry, I'm not sure
-
Subcontracting of one of operations in the production order of SPK
Dear All, Example: Material A (soft) having special procurement key SPK as "52". In the routing of this material there r 3 operations 10, 20, 30. We have generated production order of this material A. We want to get 20 th operation done from outsid