Aggregtaor Transformation without any condition showing zero records in target table

Hi Everyone, I have a source table which has 100 records,I just passing all the 100 records to aggregator transformation. In aggregator transformation i am not giving any condition,I just mapped from aggreator directy to target table.After running this mapping in target table i found 0 records in target table. why this happing can anyone explain this?

Magazinweg 7Taucherstraße 10Taucherstraße 10Av. Copacabana, 267Strada Provinciale 124Fauntleroy CircusAv. dos Lusíadas, 23Rua da Panificadora, 12Av. Inês de Castro, 414Avda. Azteca 123 I have the source table like this and i want to replace the character and sum up the numbers and how can i do it, I replace the character by reg_replace() function but I am not able to add the number because it is of not fixed length. My Output should be,71115705396

Similar Messages

ITunes opens but without any text showing. Drop down menus have text but not the app itself. I have a Mac Powerbook Pro running Windows XP under Boot Camp.

Running under Windows XP, a few upgrades ago iTunes started opening without any text showing in the application. Clicking on PLAY will play music but no text shows to indicate what's playing and no text to show music library. Drop down windows show text but not the app itself.
Subsequent upgrades and reinstalls have not corrected the problem, When I run under iOS (Snow Leopard), iTunes opens with text and runs correctly.
Help!

Because I created FAT32 partition using Boot Camp tool few days ago I installed my custom copy of Windows XP with SP3, IE7 and WMP10 integrated using nLite (for WMP10 integration use RVM Integrator). I did not use Boot Camp tool this time - I just booted CD using Option key. Then I installed Boot Camp 2.0 drivers you can find on Mac Disk 1. After this I installed Boot Camp drivers 2.1 update. In Add or remove Programs I checked drivers - I uninstalled old drivers which call identical, but you can skip this. Everything works fine BTW it is better to format your partition to NTFS - you have much less disk errors, you do not waste time for disk errors scans during Windows startup, your data are much more safe. If you need NTFS write permissions use great tool Paragon NTFS for Mac OSX or open source NTFS driver.
Message was edited by: limo79

Show zeroes in a control table (Module Pool)

Hi all.
I need showing zeroes in a control table.
I declared fields type char in the control table (and in the internal table) and it shows zeroes, but I need declare it type QUAN (control table and internal table).
With all types (except CHAR) I couldn't show de zeroes there.
If anybody can help me, I Will be grateful!

Hi,
In your PBO, inside LOOP ENDLOOP, have a module for screen modifications and for the last row that has totals, you set screen-invisible = 1 inside LOOP AT SCREEN. ENDLOOP.
For example,
If your screen has following PBO Logic,
MODULE ...
MODULE ...
LOOP ...
****New module here for screen modification if does not ****exist already.
    MODULE modify_screen.
ENDLOOP.
and then in MODULE modify_screen.
MODULE modify_screen.
****Basically check MATNR EQ 'TOTAL' or some thing like ****that
    IF <your condition for totals line>.
      LOOP AT SCREEN.
****Note instead of screen-name, you can assign a screen ****group to all columns w/o totals and then use
****SCREEN-GROUP1 EQ <your grp> logic
        IF screen-name EQ <your column name w/o totals>.
          screen-invisible = 1.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDMODULE.
On another note, since you are already disabling this fields in the last row, you have all the screen modification logic already I guess, so just add SCREEN-INVISIBLE = 1 for all fields w/o totals..
Hope this helps..
Sri
Message was edited by: Srikanth Pinnamaneni

I HAVE A SOURCE TABLE WITH 10 RECORDS AND TARGET TABLE 15 RECORDS. MY WUESTION IS USING WITH THE TABLE COMPARISON TRANSFORM I WANT TO DELETE UNMATCHED RECORDS FROM THE TARGET TABLE ??

I HAVE A SOURCE TABLE WITH 10 RECORDS AND TARGET TABLE 15 RECORDS. MY QUESTION IS USING WITH THE TABLE COMPARISON TRANSFORM .I WANT TO DELETE UNMATCHED RECORDS FROM THE TARGET TABLE ?? HOW IT IS ??

Hi Kishore,
First identify deleted records by selecting "Detect deleted rows from comparison table" feature in Table Comparison
Then Use Map Operation with Input row type as "delete" and output row type as "delete" to delete records from target table.

CRM Segment builder Showing zero records.

Hello Gurus,
Iam running a segment builder in CRM and the BI report comes with Zero records. The report is all fine in BI and it works 100%, is there anything iam missing on the CRM side.
Please advice.
Thanks,
Praveen

Hello,
I think you might be having some of the characters as mandatory in BI report. When you run the report from CRM, the report expects the value for mandatory fields. You can pass these values from CRM before creating filters in Segment Builder.
Right click on the Attribute and click on the Edit filter condition and check search help of Variable Name if any of the fields are mandatory then give the reqd values here.
Once you put the values then create the filter for attribute.
Hope this will work.
Rgds
Mallikarjun

RSA7 shows zero records for delta upload of 2LIS_03_BF Datasource

Dear Professionals,
I am having constant issues with inventory management DataSource (2LIS_03_BF). I scheduled delta upload in r3 production using LBWE, keeping in mind that in LBWE there is no options for posting dates, ETC... In RSA3, there are records, but when i check RSA7, it is showing 0 records. What could be the problem. Do i need to do anything/activation anywhere in LBWE or RSA7 to see the records. Please advise.

Hi,
Normally there should be a collective run which transfers data from the application-specific queues to the BW delta queue (RSA7), just like this workflow:
MCEX03 queue==> RMBWV03 (Collective run job) ==> RSA7-Delta queue => BW
It is necessary to schedule the job control regularly - see point 3 of SAP Note 505700.
Check also these SAP Notes:
869628     Constant WAITUPDA in SMQ1 and performance optimization
728687     Delta queued: No data in RSA7
527481     tRFC or qRFC calls are not processed
739863    Repairing data in BW
Rgds,
Colum

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

Informatica failed to update records in target table

Hi,
Recently I converted hourly full load into incremental laod. everything is working good except updating records in target. Informatica not updating any records and I'm trying to understand and troubleshoot the issue. details given below
I ran mapping debugger and came to know Filter transformation is filtering the data instead of passing to next transformation because update flag is X.
ETL_PROC_WID AND LKP_ETL_PROC_WID are same and update flag = X.
I dont understand why ETL_PROC_WID AND LKP_ETL_PROC_WID are same. As per my knowledge Informatica generates new ETL_PROC_WID for every ETL run. If you know anything about it please let me know.
I executed code in SYS_COL_DIFF and UPDATE_FLG manually(on paper for few records) by assuming ETL_PROC_WID AND LKP_ETL_PROC_WID are different and got UPDATE_FLG=U
If you know how MPLT_GET_ETL_PROC_WID mapplet in OOTB works please let me know.
appreciate you for your help
Thanks
Jay.
Edited by: JV123 on Dec 12, 2012 9:29 AM

Welcome to the forum.
You can try your hands on MERGE while performing the INSERT operation
Something like this
MERGE INTO Emp_Org eo
USING (
          select Empno,deptno,empname,currenttimestamp from Emp
       ) x
ON (
               eo.Empno      = x.Empno
WHEN NOT MATCHED THEN
     INSERT
          Empno,
          country,
          Emporg,
          currenttimestamp,
          Targettimestamp
     VALUES
          x.Empno,
          'USA', /* Used Constant here */
          'Emporg', /* Used Constant here */
          x.currenttimestamp,
          sysdate /* Used Constant here */
     );If you are not ok with the solution, then provide some sample data with expected output

Need to Insert Records in target table.

Hi All,
This is my first thread in this forum.
My source table name is Emp and Target table name is Emp_Org.
Given below is the structure of the source table
Empno(p.key) deptno(p.key) empname currenttimestamp
Target Table MetaData.
Empno(p.key) country Emporg currenttimestamp Targettimestamp
My problem is In my source table I have 10000 records. While I run the job, out of 10000 records only 4000 records are Inserted into the target table. If I run the job again, I need to run the job from 4001 onwards not from the begining.
I don't know exactly how can I write a sql for above logic.
I don't have idea how to do this?. Any help would be really appreciated.
Edited by: 896227 on Nov 9, 2011 3:46 AM

Welcome to the forum.
You can try your hands on MERGE while performing the INSERT operation
Something like this
MERGE INTO Emp_Org eo
USING (
          select Empno,deptno,empname,currenttimestamp from Emp
       ) x
ON (
               eo.Empno      = x.Empno
WHEN NOT MATCHED THEN
     INSERT
          Empno,
          country,
          Emporg,
          currenttimestamp,
          Targettimestamp
     VALUES
          x.Empno,
          'USA', /* Used Constant here */
          'Emporg', /* Used Constant here */
          x.currenttimestamp,
          sysdate /* Used Constant here */
     );If you are not ok with the solution, then provide some sample data with expected output

Create a Master-Detail Records in target table

hi,
I have a source in a table that contains the infos of customers and for each customer record, we have three fields representing the customer ID
(Identity card, SIN, passport ID) and I want to create 3 record in the target table for each customer, each record contains information for each ID
How can we do with OWB?
thanks.

hello
i belive you need to use pivot operator
check out this blog
https://blogs.oracle.com/warehousebuilder/entry/pivoting_data_in_owb
rgds

PSA had delta records but while updating to DSO it shows zero records.

Hi all,
I have a delta info package which picks up the delta records. The data is successfully extracted from source system and updated in the PSA. But the no of records extracted to the DSO are zero. Couldnt understand what is the problem. Request your valuable inputs on this issue.

Inside the InfoPackage which you ran, click on the Monitor button or hit F6. In the next screen, open up the folder with the correct run date and select the node - on the right hand side of the screen, click on the tab named Details. Click on No to the subsequent dialog box. Here, open up the last node named "Processing (data packet)" then open up node named "Data Package". Open up all nodes under this one and you'll probably find that either there is a custom start/end routine in the Transfer Rules or in the Update Rules which is filtering out the records from the PSA from updating the target (Cube/ODS). One of these nodes will show you the exact count of how many records came into PSA and how many were passed on to the data target to update it and the reason behind it, for e.g. "Number of data records changed form 16 to 2 in start routine".
Hope this helps.
Cheers,
Sougata.

Infocube showing zero records...

Hello All,
I am loading data from flat file to ODS then to cube, after loading the data i can see the number of records transfered and added in the ods, but not in the infocube.
Please help...
Regards,
MC

Hi MC,
Please Make sure that the data load to ODS is successful, check the number of records added to the ODS.
If everything is fine with ODS , then
1. Check the details tab in RSMO, here you can see the status of records added.
2. Check the update rule of the InfoCube.
Then delete the request from the InfoCube by making total status to RED manually.
Then reset the datamart status of the ODS request then reschedule it.
Hope it helps...
Regards,
Zakirahamed SM

Viewing document without any guides showing WHEN FIRST Open

I know how to turn off the guides when the document is already open. But I don't have a clue how to save the document, so that the end user can open a clean page?

As far as I know, View > Grids & Guides > Show/Hide Guides gets saved
with the file. If you Hide Guides and save the file, the next person to
open the file shouldn't see guides.
This is not technically "when first open".
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Zero records in delta update

Dear All,
In HR :Time management (Time and Labour )(cube) 0PT_C01 two data sources are there and one is 0HR_PT_1 , during delta load it does not get any recors and it will show zero records at cube level and in r/3 rsa3 ir shows new records.Please suggest how to solve this issue.
Regards
Albaik

Hi,
This is because you havent run the init load till now.
We have to run a init load before running delta(one time process).
now as you have selected init with datatransfer, you got all the records transferred.
from next time, no need to run init and you can proceed with delta.
Cheers,
Srinath.

0PS_WBS_EVA (earned value) returns zero records

Hello,
I've activated the business content datasources for Project systems. I'm unable to get any records for earned values from R/3. The following datasources show zero records:
0PS_WBS_EVA
0PS_NWA_EVA
0PS_ORD_EVA
0PS_NAE_EVA
Can anyone tell me the tables to where these datasources are hitting? Help.SAP wasn't much of a help. I have already looked there.
Are there any settings within ECC that need to be changed in order to get data for the above datasources?
I'm getting data for the CO datasources related to project systems, such as 0CO_OM_WBS_6, 0CO_OM_OPA_6 and so on.
Due to zero records from the above datasources, there is no data coming in the Earned Values cube of Project systems.
Regards,
Sameer

Dear Oscar,
Thanks for your response,
The Actual Cost posted by our Functional Consultant is USD 250, but i am getting the Total Actual cost is ZERO (Sum of -250 +250) as i shown above.
the posted actual cost is +250, finally we need this figure only,
if i do restriction on Sender receiver Indicater field with S than i will get Actual Cost 250, but in SAP standard RKF for Actual Cost there is no restriction on Sender receiver Indicater field (S & H)
I hope you got my point now.
Thanks
Amar Reddy

Aggregtaor Transformation without any condition showing zero records in target table

Similar Messages

Maybe you are looking for