Aironet 1130 AG

I am configuring the Access Point and after going through the Express Setup and Express Security pages, and after turning the radios on, the Services page no longer displays HTTP, or any other services. It does however display the following...
" \n'; for (i=0; i "
and that is all.
Any ideas what has happened? I am configuring two of these and each one does this same thing, so I do not believe it to be a hardware error.

The Bootloader version is 12.3(8)JEA.... It seems that when I go to Security-->Admin Access and change the Authentication to "Local User List Only" and then remove the Global Password, the Services page disappears. Unless someone has something better, I think that I will keep a Global Password, but change it. That seems to have worked....

Similar Messages

  • Dual SSID (with dual VLAN) on Cisco AiroNet 1130

    Cisco Community,
    I need some major help in figuring out how to change our wireless setup. Currently, we have 2 Cisco AiroNet 1130 WAP's in the office that go directly into the 2 POE ports on our Cisco ASA 5500. These WAP's have 1 SSID and are using WEP for security. After demonstrating the flaws of WEP to my boss, he has agreed that we should use something more secure and I've suggested WPA. We want visitors to our office to be able to hop on our wireless but on a separate guest SSID with WEP.
    I'd like the internal SSID to route to the ASA and take the default route to the internet (it will be our new fiber connection once it's installed in a couple weeks). The default route is whichever connection is working since our ASA 5500 will fail over when it detects an outage.
    I'd like the guest SSID to route to the ASA and then go over our existing cable connection. This connection will be our backup once the fiber connection is installed. Since we won't be using it very often, but will be paying for it, I advised that we send all guest wireless traffic over this connection since 50/5 is plenty for guests.
    I have no idea how to create a VLAN and implement it but I can generally figure things out with a little help. The current SSID (which will be the internal SSID) has no VLAN. We do currently have a few VLANS on our network, one for voice (.42) and one for data (.100) and the default (.0). What device to I create the VLAN on (Cisco 5500?) and how to I setup the WAP? I need very basic instructions to start and I'm also trying to do this without causing downtime if possible.
    I've attached a diagram of what it should look like. Red indicates our internal network and Blue indicates the guest network. I can send screenshots as well.
    Hope everyone is enjoying their holidays.
    Thanks,
    Cody

    Cody,
    Here is a good doc to follow... it explains multiple ssid's and vlans
    https://supportforums.cisco.com/docs/DOC-14496
    Sent from Cisco Technical Support iPad App

  • Aironet 1130 ag not booting

    I have an aironet 1130 ag that won't boot,
    the following is displayed in the console.
    Xmodem file system is available.
    flashfs[0]: 10 files, 3 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 15998976
    flashfs[0]: Bytes used: 2670592
    flashfs[0]: Bytes available: 13328384
    flashfs[0]: flashfs fsck took 26 seconds.
    Base ethernet MAC Address: 00:1c:58:06:a1:1a
    Initializing ethernet port 0...
    Reset ethernet port 0...
    it freezes at the above point
    I tried holding down the mode button to transfer a new image via tftp but that failed (the link b/w the ap and the computer never came up)
    It seems the the ap can't bring the ethernet interface up.  Is this a hardware problem or is there something else i should try?

    I would think about an RMA at this point.
    Nicolas

  • Cisco Aironet 1130

    I need to configure SNMP on our company Aironet 1130.   I am told there is a tool we can use that will allow us do the configuration from a PC vs connecting directly to the device.. If that is true, where can I download it?

    I would like to enable SNMP on the device so that our SolarWinds Orion NPM server can monitor the device
    Ok.  NOOOOOOOOOOOW I understand you. 
    You need to enable one of two types of SNMP communities:  Read Only or Read-Write.
    For example, if your SNMP community is TV for Read-only and RADIO for Read-Write then it's this:
    snmp-server community TV ro
    snmp-server community RADIO rw

  • Cisco aironet 1130 and Intermec CV30

    Hi to all,
    I've a little problem with three Cisco 1130 AP. Anticipately i tell you that i'm not a guru of cisco wireless, but my implementation is very simple. I need a roaming for the 3 AP. I only have Ap, so i configure one as Master Ap and the others like repeater with cisco aironet extension configured. All 3 on the same channel and only the Master one broadcast SSID. Wep security implemented. My Cv30 terminals randomly loose the signal also if they're near an AP. They use windows mobile but i think is only a wrong config problem. I need help. Thank you very much.
    Alex

    The device is using the LWAPP image.. please upgade the same to autonomous image and convert the same..
    Please use the below doc that i hv written and this will helpu!!
    https://supportforums.cisco.com/docs/DOC-14960
    Please dont forget to rate the usefull posts!!
    Regards
    Surendra

  • Difference between aironet 1130 and 1230

    can you please tell me what are the differences between this 2 Aironet?
    regards

    Here is the data sheets,
    1230
    http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6108/product_data_sheet0900aecd801b9068.html
    1130
    http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6087/product_data_sheet0900aecd801b9058.html
    Regards,
    ~JG
    Do rate helpful posts

  • Aironet 1130 Configuration

    We have a Cisco Aironet 1130AG Access Point in our Community Centre.
    It was originally installed by the County Council, with no security password set.
    We were unable to access the AP as the technician who installed it had changed the password from the default, but hadn't recorded it (and has now left).
    We therefore did a Factory Reset, which has enabled us to configure the AP. However, there are a few problems:
    1) If the AP is re-booted, it loses all the settings;
    2) We can't save the Current Startup Configuration;
    3) We don't seem to be able to change the default password.
    Regards
    Adrian Cobley

    The fact that you can't save the configuration or that it gets deleted after a reboot, points to an issue with the nvram, it might be a hardware failure.
    However as George said, paste the configuration to take a look, also issue a show ver and let us know which version are you using.

  • Manage new Aironet 1130 with web browser

    Hello,
    I bought a wi-fi Aironet 1130AG, I plug it in my network, it gets an IP address with my DHCP server but I can not manage it with my internet browser, "Internet Explorer can not display this page ". Wifi terminal responds to ping.
    Thank you for your help.
    Anthony

    When you recieve brand new AP you should be able to console into it.
    Just to evaluate what you really have we need to have console output :
    May be the IOS image is corrupted for example.
    If after checking the console and making sure that nothing wrong , i would say re-image the AP using console session.
    check the following link for more information on how to download ios image to the AP:
    http://www.cisco.com/en/US/partner/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b-chap20-firmware.html#wp1035644
    Please Don't forget to rate correct answers

  • Aironet 1130 AG Ping Drops.

    Hello Friends,
    We have 5 Access point in our network. recently we discovered ping drops in all access point. the pings dropping randomly. sometime one request time out or three times.
    All APs are connected with POE edge switch.For test,  we attached with other Core switch with power adapter but again same problem. We created different VLan & tried but same result.Even we upgraded OS to 12.4(25d)JA2
    We tested same AP with other company network & there its working without any drops.
    We are facing this issue since one month & there is no changes in network configuration.
    Please advice on this problem.
    Thank You..

    We tested same AP with other company network & there its working without any drops.
    So when you say this, to me it's no change in the AP configuration, but your just connecting it to another network and it's working fine. So that being said, looks like a meteors configuration issue not an issue.  
    -Scott

  • Aironet 1130 AG series Browser configuration Service Tab display issue

    Has anyone ran into an issue accesing the service tab to display the service summary page? I ran into this issue while configuring the wap through the browser when suddenly the service tab will not display the services summary page.
    System Software Version: 12.4(10b)JA

    Here are 2 responses from Cisco:
    1.Hi Carlo,
    I came to know that the fix for the bug CSCsl22021 should be available from the Cisco website, this month, ie, in March. However, as indicated earlier, the fix is in the testing phase, as of now.
    Thanks for your time and support,
    We do value your business.
    Rajan Parmar
    Cisco TAC Engineer - Wireless
    Cisco Systems Inc.
    [email protected]
    1-212-329-2092 Ext-2060
    Monday to Friday 08:00 AM to 5:00 PM (EST)
    2.Hi Carlo,
    Thank you for the update.
    I researched on the issue and got the following details:
    Our case is being hit by a bug. For the details, please visit http://tools.cisco.com/Support/BugToolKit and enter the bug id as CSCsl22021.
    As of now, its the test code that is available as the fix, and it requires additional testing on it. If you wish, we can send you the test code, however, we cannot provide guarantee for it work without any flaws in the production environment. Otherwise, you may downgrade the existing IOS by downloading code from http://tinyurl.com/yqc4sx. You may downgrade to 12.3.8-JEA3(LD).
    Please feel free to contact me for any clarification.
    Thanks for your time and support,
    We do value your business.
    Rajan Parmar
    Cisco TAC Engineer - Wireless
    Cisco Systems Inc.
    [email protected]
    1-212-329-2092 Ext-2060
    Monday to Friday 08:00 AM to 5:00 PM (EST)
    Carlo..

  • Aironet 1130 AG Series

    I am in the process of setting up a free wireless network for visitors and tenants to use in their free time. I have run into a problem with a tenant wanting to keep their employees off the network by issuing a password. I would like to avoid this if at all possible by simply blocking their work computers Mac Addresses from accessing the network. Can this be done via the control pages as I know nothing about CLI? If so where do I start?
    Much thanks for any help I can get on this.

    Configuring Filters
    http://www.cisco.com/en/US/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b-chap16-filters.html
    Please don't forget to rate my post.  Thanks.

  • Aironet 1240AG - cant use the web interface

    I am trying to configure a new Aironet 1240AG. After it picked an ip address from the DHCP in my lan, I still can't log in using the web interface. I am using an Internet Explorer 6.0 on Win 2000. It keeps telling me cannot find server. please i need assistance

    Hi Obinna,
    Sorry about the link :( The problem here is the fact that 12.3.(11)JX is a Lightweight image. Have a look;
    Warning: All Cisco Aironet Access Points receiving Cisco IOS Software Release 12.3(11)JX will only function in conjunction with a Cisco Wireless LAN Controller. They will no longer be able to function as Cisco Aironet Autonomous Access Points.
    This product bulletin describes the content and delivery information for Cisco IOS Software Release 12.3(11)JX. This is a Cisco Lightweight Access Point Protocol (LWAPP) upgrade and recovery support software image supporting Cisco Aironet 1100, Aironet 1130, Aironet 1200, Aironet 1230 AG, Aironet 1240 AG, and Aironet 1300 Series Access Points.
    http://www.cisco.com/en/US/products/ps5861/prod_bulletin0900aecd804b1a72.html
    You can use this method to convert the AP back to Autonomous Mode (and access via Web);
    Reverting the Access Point Back to Autonomous Mode
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
    You can convert an access point from lightweight mode back to autonomous mode by loading a Cisco IOS Release that supports autonomous mode (Cisco IOS release 12.3(7)JA or earlier). If the access point is associated to a controller, you can use the controller to load the Cisco IOS release. If the access point is not associated to a controller, you can load the Cisco IOS release using TFTP.
    Using a TFTP Server to Return to a Previous Release
    Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
    Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
    Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
    Step 3 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, and c1240-k9w7-tar.default for a 1240 series access point.
    Step 4 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
    Step 5 Disconnect power from the access point.
    Step 6 Press and hold MODE while you reconnect power to the access point.
    Step 7 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
    Step 8 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
    Step 9 After the access point reboots, reconfigure it using the GUI or the CLI.
    From this doc;
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
    Hope this helps!
    Rob

  • Aironet 1552E with 8-dBi Directional Antenna AIR-ANT2588P3M-N

    Hello everyone,
    Im building a local wireless network and im going to use the Aironet 1552E outdoor cisco access point, with 2 patch-directional Antenna 8dBi (AIR-ANT2588P3M-N) at 2,4 GHz.
    The problem im facing is that i have to cover a specific area with really thick walls (about 80cm cement and stone made). That obviously decreases my signal a lot. (i currently use an indoor cisco aironet 1130 (2dBi) and its really hard for it to have more than 3-4 signal bars inside the room).
    So i would like to know, how can i calculate the distance that the new access point with the patch antenna's going to cover?
    Or where can i find any specifications about the stength of the signal and the coverage area in real enviroment?
    Thanks in advance for your answers and comments,
    Periklis

    Dear Scott,
    I understand what you say, so to make it easier for you to provide me with a “possible” answer, I will inform you about the situation. And I hope that you will be able to help me.
    We have already placed a local wireless network using the 1130AG cisco Access points. That Cisco as you know has a 2dBi omnidirectional internal antenna.  We placed them outside of the buildings, inside of electrological boxes to protect them from the environmental changes.  The walls that the signal has to penetrate are about 80cm of cement and stone. (pretty thick walls…)
    Still, their signal differs (for ipad’s and smartphones) to 2-1  and laptops 4-5. Pretty good for an indoor AP placed outside of the buildings!
    In order to increase our signal to the maximum that we can, we decided to change the 1130AG’s with 1532 E or 1552 E  AP’s.  And combine them with the 2,4GHz external 8dBi directional PATCH antennas.
    After thinking about a way to provide better signal of wireless to our customers, we decided that  increasing the signals power from 2dBi to 8dBi as well as changing the antenna’s from omnidirectional to patch directional , we will be able to achieve better penetration of the signal inside the buildings.
    What im questioning you is, IF that thought of ours has a logic and that IF is gonna work with the current situation.
    Also, I would like to know since we will propably go for this method, in which high and distance from the 1st building it should be for better coverage?
    Hope to hear from you soon, since I really need an expert’s help on this task.
    Thank you

  • Using DHCP Option 60 with Aironet APs

    Hello,
    I'm trying to configure Aironet 1000 series and Aironet 1130 series APs to talk to a wireless controller card inside a 2811 ISR. I have a Catalyst 3550 L2/L3 Switch between my APs and the 2811. So far the Aironet 1000 series found the wireless controller successfully. The following is the current configuration for the 3550 DHCP pool:
    ip dhcp pool WLAN_CM
    network 172.27.2.0 255.255.255.0
    option 60 ascii "Airespace.AP1200"
    default-router 172.27.2.1
    option 43 ascii "172.27.3.12"
    I would like to add another option 60 statement to be able to connect the Aironet 1130 AP. Would this configuration work?:
    ip dhcp pool WLAN_CM
    network 172.27.2.0 255.255.255.0
    option 60 ascii "Airespace.AP1200"
    option 60 ascii "Cisco AP c1130"
    default-router 172.27.2.1
    option 43 ascii "172.27.3.12"
    I will try shortly in the lab. I am not sure if I need to create another DHCP pool entirely dedicated for the 1130.
    Any input will be much appreciated.

    Hello
    why do you use option 60?
    From my view, the AP needs just to know option 43 to find the controller, but the problem is that the airespace-ap wanna have option 43 in ascii and ios-ap in lwapp mode wanna have the option in hex.
    best regards
    Oliver

  • Problem with certificate authentication at wlc 4402

    Hi,
    we have a problem to get a connection from the client to the WLC. 
    we  are using Cisco Aironet 1130 AG and a Cisco 4402 WLC in our network. The certificate service is installed on a Windows 2008 R2 server. We use a standalone Root CA with a Enterprise Sub CA hierarchy. Issueing certificates to clients works fine. The vendor and ca certificates are installed on the WLC and the user have his user certificate. During implementation we used following document: "http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008093f1b9.shtml#wlc". Instead of Anonymous Bind, we use a service user to read in AD (works fine, too).
    We use the Intel/PRO wireless utility on our Testclient and configured it for EAP-FAST and TLS. We can select the installed certificate in the utility, but when we try to connect, the utility throw the message: "Authentication failed due to an invalid certificate".
    We´ve logged the WLC and thats a part of the logfile (i´ve greyed out all enterprise data):
    *EAP Framework: Jan 18 12:08:21.921: EAP-AUTH-EVENT: Waiting for asynchronous reply from LL
    *LDAP DB Task 1: Jan 18 12:08:21.921: ldapTask [1] received msg 'REQUEST' (2) in state 'IDLE' (1)
    *LDAP DB Task 1: Jan 18 12:08:21.922: LDAP server 1 changed state to INIT
    *LDAP DB Task 1: Jan 18 12:08:21.922: LDAP_OPT_REFERRALS = -1*LDAP DB Task 1: Jan 18 12:08:21.925: LDAP_CLIENT: UID Search (...)))
    *LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: ldap_search_ext_s returns 0 85
    *LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Returned 2 msgs including 0 references
    *LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Returned msg 1 type 0x64
    *LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Received 1 attributes in search entry msg
    *LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT: Returned msg 2 type 0x65
    *LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT : No matched DN
    *LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT : Check result error 0 rc 1013
    *LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT: Received no referrals in search result msg
    *LDAP DB Task 1: Jan 18 12:08:21.927: ldapAuthRequest [1] called lcapi_query base="..." (rc = 0 - Success)
    *LDAP DB Task 1: Jan 18 12:08:21.927: LDAP ATTR> dn = CN=... (size 76)
    *LDAP DB Task 1: Jan 18 12:08:21.927: Handling LDAP response Success
    *LDAP DB Task 1: Jan 18 12:08:21.927: 18:3d:a2:0a:ec:bc [Response] Client requested no retries for mobile 18:3D:A2:0A:EC:BC
    *LDAP DB Task 1: Jan 18 12:08:21.927: 18:3d:a2:0a:ec:bc Returning AAA Success for mobile 18:3d:a2:0a:ec:bc
    *LDAP DB Task 1: Jan 18 12:08:21.927: AuthorizationResponse: 0x33a5affc*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: Found context matching MAC address - 319
    *LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: (EAP:319) User credential callback invoked
    *LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: EAP Unable to find password in credentials. Skipped
    *LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: EAP Unable to find wlan in credentials. Skipped
    *LDAP DB Task 1: Jan 18 12:08:21.928: Authenticated bind : Closing the binded session*LDAP DB Task 1: Jan 18 12:08:21.928: ldapClose [1] called lcapi_close (rc = 0 - Success)
    *LDAP DB Task 1: Jan 18 12:08:21.929: LDAP server 1 changed state to IDLE
    *EAP Framework: Jan 18 12:08:21.930: EAP-EVENT: Received event 'EAP_LL_REPLY' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Using credential profile name: ...(0x78000041)
    *EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Maximum EAP packet size: 1000
    *EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Sending method new context directive for EAP context 0x78000041
    *EAP Framework: Jan 18 12:08:21.930: EAP-EVENT: Sending method directive 'New Context' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:21.930: eap_fast.c-EVENT: New context (EAP handle = 0x78000041)
    *EAP Framework: Jan 18 12:08:21.931: id_manager.c-AUTH-SM: Got new ID f700000e - id_get
    *EAP Framework: Jan 18 12:08:21.931: eap_fast.c-EVENT: Allocated new EAP-FAST context (handle = 0xF700000E)
    *EAP Framework: Jan 18 12:08:21.931: EAP-AUTH-EVENT: Sending method data for context 0x78000041
    *EAP Framework: Jan 18 12:08:21.931: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
    *EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Received Identity
    *EAP Framework: Jan 18 12:08:21.931: eap_fast_tlv.c-AUTH-EVENT: Adding PAC A-ID TLV (436973636f0000000000000000000000)
    *EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Sending Start
    *EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-SM: Changing state: Reset -> Start
    *EAP Framework: Jan 18 12:08:21.931: eap_fast.c:2367: eap-fast tx packet:
    *EAP Framework: Jan 18 12:08:21.931: eap_fast.c:138: Version: 1  Flags:S  Length:0x0014
    *EAP Framework: Jan 18 12:08:21.931: eap_core.c:1422:     Payload:  00040010436973636F00000000000000 ...
    *EAP Framework: Jan 18 12:08:21.931: eap_fast.c-TX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:21.931: eap_core.c:1484: Code:REQUEST  ID:0x 0  Length:0x001a  Type:FAST
    *EAP Framework: Jan 18 12:08:21.932: eap_core.c:1422:     Payload:  2100040010436973636F000000000000 ...
    *EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: EAP method state: Continue
    *EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: EAP method decision: Unknown
    *EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: Current method = 43
    *EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
    *EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-TX-PAK:
    *EAP Framework: Jan 18 12:08:21.932: eap_core.c:1484: Code:REQUEST  ID:0x 2  Length:0x001a  Type:FAST
    *EAP Framework: Jan 18 12:08:21.932: eap_core.c:1422:     Payload:  2100040010436973636F000000000000 ...
    *EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Started EAP tick timer
    *EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:21.932: LOCAL_AUTH: Found matching context for id - 319
    *EAP Framework: Jan 18 12:08:21.932: LOCAL_AUTH: (EAP:319) transmit event
    *EAP Framework: Jan 18 12:08:21.932: AuthorizationResponse: 0x13c713fc*EAP Framework: Jan 18 12:08:21.934: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 1a
    *EAP Framework: Jan 18 12:08:21.934: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
    *aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: EAP: Received an auth request
    *aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: Found context matching MAC address - 319
    *aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 2) to EAP subsys
    *EAP Framework: Jan 18 12:08:22.291: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-RX-PAK:
    *EAP Framework: Jan 18 12:08:22.291: eap_core.c:1484: Code:RESPONSE  ID:0x 2  Length:0x0042  Type:FAST
    *EAP Framework: Jan 18 12:08:22.291: eap_core.c:1422:     Payload:  810000003816030100330100002F0301 ...
    *EAP Framework: Jan 18 12:08:22.291: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
    *EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: EAP Response type = Method (43)
    *EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: Sending method data for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.292: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.292: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
    *EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
    *EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-RX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:22.292: eap_core.c:1484: Code:RESPONSE  ID:0x 2  Length:0x0042  Type:FAST
    *EAP Framework: Jan 18 12:08:22.292: eap_core.c:1422:     Payload:  810000003816030100330100002F0301 ...
    *EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-AUTH-EVENT: Received TLS record type: Handshake in state: Start
    *EAP
    Framework: Jan 18 12:08:22.292: EAP-EVENT: Sending lower layer event
    'EAP_GET_CREDENTIAL_PROFILE_FROM_PROFILE_NAME' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.292: LOCAL_AUTH: Found matching context for id - 319
    *EAP
    Framework: Jan 18 12:08:22.292: LOCAL_AUTH: (EAP:319) Returning profile
    *EAP Framework: Jan 18 12:08:22.293: IOS_PKI_SHIM: [StartSession] - New session 0x335ee108 started (TP = 'vendor')
    *EAP Framework: Jan 18 12:08:22.293: IOS_PKI_SHIM: [StartSession] - Trustpoint identity (cert) set to 'Vendor'
    *EAP
    Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Subject : ...
    *EAP Framework: Jan 18
    12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Issuer : ...
    *EAP Framework: Jan 18
    12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Valid from '2012 Jan 12th,
    17:06:50 GMT' to '2016 Jan 11th, 17:06:50 GMT'
    *EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Is not a CA cert
    *EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: Added cert (type 1) to chain (1 present on chain)
    *EAP
    Framework: Jan 18 12:08:22.300: IOS_PKI_SHIM: [CA-CERT] Subject :
    *EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Issuer : CN=...
    *EAP
    Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Valid from
    '2012 Jan 12th, 16:54:49 GMT' to '2020 Jan 12th, 17:04:49 GMT'
    *EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Is a CA cert
    *EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: Added cert (type 2) to chain (2 present on chain)
    *EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [StartSession] - Getting older style priv key
    *EAP Framework: Jan 18 12:08:22.338: IOS_PKI_SHIM: Session 0x335ee108 init'd OK
    *EAP Framework: Jan 18 12:08:22.338: eap_fast_auth.c-AUTH-EVENT: Local certificate found
    *EAP Framework: Jan 18 12:08:22.339: eap_fast_auth.c-AUTH-EVENT: Reading Client Hello handshake
    *EAP Framework: Jan 18 12:08:22.339: eap_fast.c:286: EAP-FAST-AUTH-RX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.339: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x0033
    *EAP Framework: Jan 18 12:08:22.339: eap_core.c:1422:     Payload:  0100002F03014F16A8262631FC9DC042 ...
    *EAP Framework: Jan 18 12:08:22.340: eap_fast.c:202: Handshake type:Client Hello  Length:0x002F
    *EAP Framework: Jan 18 12:08:22.340: eap_core.c:1422:     Payload:  03014F16A8262631FC9DC042253D3E24 ...
    *EAP Framework: Jan 18 12:08:22.340: eap_fast_auth.c-AUTH-EVENT: TLS_RSA_WITH_AES_128 proposed...
    *EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA proposed...
    *EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_RSA_WITH_RC4_128 proposed...
    *EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_DH_anon_WITH_AES_128_CBC_SHA proposed...
    *EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: Proposed ciphersuite(s):
    *EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT:     TLS_RSA_WITH_AES_128_CBC_SHA
    *EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT:     TLS_DHE_RSA_WITH_AES_128_CBC_SHA
    *EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT:     TLS_RSA_WITH_RC4_128_SHA
    *EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT:     TLS_DH_anon_WITH_AES_128_CBC_SHA
    *EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: Selected ciphersuite:
    *EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT:     TLS_DHE_RSA_WITH_AES_128_CBC_SHA
    *EAP Framework: Jan 18 12:08:22.343: eap_fast_auth.c-AUTH-EVENT: Building Provisioning Server Hello
    *EAP Framework: Jan 18 12:08:22.344: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.344: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x002A
    *EAP Framework: Jan 18 12:08:22.344: eap_core.c:1422:     Payload:  0200002603015F3325EADF12E6296F91 ...
    *EAP Framework: Jan 18 12:08:22.344: eap_fast.c:202: Handshake type:Server Hello  Length:0x0026
    *EAP Framework: Jan 18 12:08:22.345: eap_core.c:1422:     Payload:  03015F3325EADF12E6296F91530FE67F ...
    *EAP Framework: Jan 18 12:08:22.345: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.345: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x0B54
    *EAP Framework: Jan 18 12:08:22.346: eap_core.c:1422:     Payload:  0B000B50000B4D00059F3082059B3082 ...
    *EAP Framework: Jan 18 12:08:22.346: eap_fast.c:202: Handshake type:Certificate  Length:0x0B50
    *EAP Framework: Jan 18 12:08:22.346: eap_core.c:1422:     Payload:  000B4D00059F3082059B30820483A003 ...
    *EAP Framework: Jan 18 12:08:22.347: eap_fast_crypto.c-EVENT: Starting Diffie Hellman phase 1 ...
    *EAP Framework: Jan 18 12:08:22.661: eap_fast_crypto.c-EVENT: Diffie Hellman phase 1 complete
    *EAP Framework: Jan 18 12:08:22.677: IOS_PKI_SHIM: PKI_SignMessage PostHashEncrypt ret SUCCESS.. op_len 128
    *EAP Framework: Jan 18 12:08:22.678: eap_fast_auth.c-AUTH-EVENT: DH signature length = 128
    *EAP Framework: Jan 18 12:08:22.678: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.678: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x028D
    *EAP Framework: Jan 18 12:08:22.679: eap_core.c:1422:     Payload:  0C0002890100FFFFFFFFFFFFFFFFC90F ...
    *EAP Framework: Jan 18 12:08:22.679: eap_fast.c:202: Handshake type:Server Key Exchange  Length:0x0289
    *EAP Framework: Jan 18 12:08:22.679: eap_core.c:1422:     Payload:  0100FFFFFFFFFFFFFFFFC90FDAA22168 ...
    *EAP Framework: Jan 18 12:08:22.679: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.680: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x000B
    *EAP Framework: Jan 18 12:08:22.680: eap_core.c:1422:     Payload:  0D00000704030401020000
    *EAP Framework: Jan 18 12:08:22.680: eap_fast.c:202: Handshake type:Certificate Request  Length:0x0007
    *EAP Framework: Jan 18 12:08:22.680: eap_core.c:1422:     Payload:  04030401020000
    *EAP Framework: Jan 18 12:08:22.681: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.681: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x0004
    *EAP Framework: Jan 18 12:08:22.681: eap_core.c:1422:     Payload:  0E000000
    *EAP Framework: Jan 18 12:08:22.681: eap_fast.c:202: Handshake type:Server Done  Length:0x0000
    *EAP Framework: Jan 18 12:08:22.682: eap_fast_auth.c-AUTH-EVENT: Sending Provisioning Serving Hello
    *EAP Framework: Jan 18 12:08:22.682: eap_fast_auth.c-AUTH-SM: Changing state: Start -> Sent provisioning Server Hello
    *EAP Framework: Jan 18 12:08:22.682: eap_fast.c-EVENT: Tx packet fragmentation required
    *EAP Framework: Jan 18 12:08:22.683: eap_fast.c:2367: eap-fast tx packet:
    *EAP Framework: Jan 18 12:08:22.683: eap_fast.c:138: Version: 1  Flags:LM  Length:0x03DE
    *EAP Framework: Jan 18 12:08:22.683: eap_core.c:1422:     Payload:  160301002A0200002603015F3325EADF ...
    *EAP Framework: Jan 18 12:08:22.684: eap_fast.c-TX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:22.684: eap_core.c:1484: Code:REQUEST  ID:0x 0  Length:0x03e8  Type:FAST
    *EAP Framework: Jan 18 12:08:22.684: eap_core.c:1422:     Payload:  C100000E33160301002A020000260301 ...
    *EAP Framework: Jan 18 12:08:22.684: EAP-AUTH-EVENT: EAP method state: Continue
    *EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: EAP method decision: Unknown
    *EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: Current method = 43
    *EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-TX-PAK:
    *EAP Framework: Jan 18 12:08:22.685: eap_core.c:1484: Code:REQUEST  ID:0x 3  Length:0x03e8  Type:FAST
    *EAP Framework: Jan 18 12:08:22.686: eap_core.c:1422:     Payload:  C100000E33160301002A020000260301 ...
    *EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Started EAP tick timer
    *EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.686: LOCAL_AUTH: Found matching context for id - 319
    *EAP Framework: Jan 18 12:08:22.687: LOCAL_AUTH: (EAP:319) transmit event
    *EAP Framework: Jan 18 12:08:22.687: AuthorizationResponse: 0x13c713fc*EAP Framework: Jan 18 12:08:22.755: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 297
    *EAP Framework: Jan 18 12:08:22.755: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
    *aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: EAP: Received an auth request
    *aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: Found context matching MAC address - 319
    *aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 6) to EAP subsys
    *EAP Framework: Jan 18 12:08:22.831: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.831: EAP-AUTH-RX-PAK:
    *EAP Framework: Jan 18 12:08:22.831: eap_core.c:1484: Code:RESPONSE  ID:0x 6  Length:0x015c  Type:FAST
    *EAP Framework: Jan 18 12:08:22.831: eap_core.c:1422:     Payload:  810000015216030100070B0000030000 ...
    *EAP Framework: Jan 18 12:08:22.831: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.831: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
    *EAP Framework: Jan 18 12:08:22.832: EAP-AUTH-EVENT: EAP Response type = Method (43)
    *EAP Framework: Jan 18 12:08:22.832: EAP-AUTH-EVENT: Sending method data for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.832: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.832: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
    *EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
    *EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-RX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:22.832: eap_core.c:1484: Code:RESPONSE  ID:0x 6  Length:0x015c  Type:FAST
    *EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422:     Payload:  810000015216030100070B0000030000 ...
    *EAP
    Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Received
    TLS record type: Handshake in state: Sent provisioning Server Hello
    *EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Reading Client Certificate handshake
    *EAP Framework: Jan 18 12:08:22.832: eap_fast.c:286: EAP-FAST-AUTH-RX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.832: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x0007
    *EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422:     Payload:  0B000003000000
    *EAP Framework: Jan 18 12:08:22.832: eap_fast.c:202: Handshake type:Certificate  Length:0x0003
    *EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422:     Payload:  000000
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c-EVENT: Client Certificate handshake empty
    *EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-EVENT: Rx'd I-ID: "EAP-FAST I-ID" from Peer Cert
    *EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-ERROR: Required cert not provided by client
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c:255: Content:Alert  Version:0301  Length:0x0002
    *EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422:     Payload:  0228
    *EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-SM: Changing state: Sent provisioning Server Hello -> Alert
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c:2367: eap-fast tx packet:
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c:138: Version: 1  Flags:L  Length:0x0007
    *EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422:     Payload:  15030100020228
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c-TX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:22.833: eap_core.c:1484: Code:REQUEST  ID:0x 0  Length:0x0011  Type:FAST
    *EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422:     Payload:  810000000715030100020228
    *EAP Framework: Jan 18 12:08:22.833: EAP-AUTH-EVENT: EAP method state: Continue
    *EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: EAP method decision: Fail
    *EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: Current method = 43
    *EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-TX-PAK:
    *EAP Framework: Jan 18 12:08:22.834: eap_core.c:1484: Code:REQUEST  ID:0x 7  Length:0x0011  Type:FAST
    *EAP Framework: Jan 18 12:08:22.834: eap_core.c:1422:     Payload:  810000000715030100020228
    *EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Started EAP tick timer
    *EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.834: LOCAL_AUTH: Found matching context for id - 319
    *EAP Framework: Jan 18 12:08:22.834: LOCAL_AUTH: (EAP:319) transmit event
    *EAP Framework: Jan 18 12:08:22.834: AuthorizationResponse: 0x13c713fc
    We think that the reason why it didn´t work, is the part:
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c-EVENT: Client Certificate handshake empty
    *EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-EVENT: Rx'd I-ID: "EAP-FAST I-ID" from Peer Cert
    *EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-ERROR: Required cert not provided by client
    But we aren´t sure.
    Maybe anyone can help us. Many thanks in advance.
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.01.18 12:08:18 =~=~=~=~=~=~=~=~=~=~=~=
    debug aaa all disable                     debug aaa all enable(Cisco Controller) >*Dot1x_NW_MsgTask_0: Jan 18 12:08:21.917: 18:3d:a2:0a:ec:bc Audit Session ID added to the mscb: 0a63081e000000994f16a825
    *Dot1x_NW_MsgTask_0: Jan 18 12:08:21.917: Creating audit session ID (dot1x_aaa_eapresp_supp) and Radius Request
    *aaaQueueReader: Jan 18 12:08:21.917: AuthenticationRequest: 0x30b52e90
    *aaaQueueReader: Jan 18 12:08:21.917: Callback.....................................0x10b7803c*aaaQueueReader: Jan 18 12:08:21.917: protocolType.................................0x00140001*aaaQueueReader: Jan 18 12:08:21.917: proxyState...................................18:3D:A2:0A:EC:BC-02:00*aaaQueueReader: Jan 18 12:08:21.917: Packet contains 16 AVPs (not shown)*aaaQueueReader: Jan 18 12:08:21.917: 18:3d:a2:0a:ec:bc [Error] Client requested no retries for mobile 18:3D:A2:0A:EC:BC
    *aaaQueueReader: Jan 18 12:08:21.918: 18:3d:a2:0a:ec:bc Returning AAA Error 'No Server' (-7) for mobile 18:3d:a2:0a:ec:bc
    *aaaQueueReader: Jan 18 12:08:21.918: AuthorizationResponse: 0x3e04bd08
    *aaaQueueReader: Jan 18 12:08:21.918: structureSize................................32*aaaQueueReader: Jan 18 12:08:21.918: resultCode...................................-7*aaaQueueReader: Jan 18 12:08:21.918: protocolUsed.................................0xffffffff*aaaQueueReader: Jan 18 12:08:21.918: proxyState...................................18:3D:A2:0A:EC:BC-02:00*aaaQueueReader: Jan 18 12:08:21.918: Packet contains 0 AVPs:*aaaQueueReader: Jan 18 12:08:21.918: LOCAL_AUTH: EAP: Received an auth request
    *aaaQueueReader: Jan 18 12:08:21.918: LOCAL_AUTH: Creating new context
    *aaaQueueReader: Jan 18 12:08:21.918: EAP-EVENT: Received context create from lower layer (0x0000013F)
    *aaaQueueReader: Jan 18 12:08:21.918: id_manager.c-AUTH-SM: Got new ID 78000041 - id_get
    *aaaQueueReader: Jan 18 12:08:21.918: EAP-EVENT: Received credential profile name: "(null)" from LL
    *aaaQueueReader: Jan 18 12:08:21.918: EAP-EVENT: Allocated new EAP context (handle = 0x78000041)
    *aaaQueueReader: Jan 18 12:08:21.919: LOCAL_AUTH: Created new context eap session handle 78000041
    *aaaQueueReader: Jan 18 12:08:21.919: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 1) to EAP subsys
    *EAP Framework: Jan 18 12:08:21.919: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:21.920: EAP-AUTH-RX-PAK:
    *EAP Framework: Jan 18 12:08:21.920: eap_core.c:1484: Code:RESPONSE  ID:0x 1  Length:0x002b  Type:IDENTITY
    *EAP Framework: Jan 18 12:08:21.920: eap_core.c:1422:     Payload:  416E6472652E54736368656E74736368 ...
    *EAP Framework: Jan 18 12:08:21.920: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
    *EAP Framework: Jan 18 12:08:21.920: EAP-AUTH-EVENT: EAP Response type = Identity
    *EAP Framework: Jan 18 12:08:21.920: EAP-AUTH-EVENT: Received peer identity: [email protected]
    *EAP Framework: Jan 18 12:08:21.920: EAP-EVENT: Sending lower layer event 'EAP_GET_CREDENTIAL_PROFILE_FROM_USERNAME' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:21.920: LOCAL_AUTH: Found matching context for id - 319
    *EAP Framework: Jan 18 12:08:21.921: LOCAL_AUTH: (EAP) Sending user credential request username '[email protected]' to LDAP
    *aaaQueueReader: Jan 18 12:08:21.921: AuthenticationRequest: 0x33a6ae18
    *aaaQueueReader: Jan 18 12:08:21.921: Callback.....................................0x10765234*aaaQueueReader: Jan 18 12:08:21.921: protocolType.................................0x00100002*aaaQueueReader: Jan 18 12:08:21.921: proxyState...................................18:3D:A2:0A:EC:BC-00:00*aaaQueueReader: Jan 18 12:08:21.921: Packet contains 2 AVPs (not shown)*EAP Framework: Jan 18 12:08:21.921: EAP-AUTH-EVENT: Waiting for asynchronous reply from LL
    *LDAP DB Task 1: Jan 18 12:08:21.921: ldapTask [1] received msg 'REQUEST' (2) in state 'IDLE' (1)
    *LDAP DB Task 1: Jan 18 12:08:21.922: LDAP server 1 changed state to INIT
    *LDAP DB Task 1: Jan 18 12:08:21.922: LDAP_OPT_REFERRALS = -1*LDAP DB Task 1: Jan 18 12:08:21.922: ldapInitAndBind [1] called lcapi_init (rc = 0 - Success)
    *LDAP DB Task 1: Jan 18 12:08:21.925: ldapInitAndBind [1] configured Method Authenticated lcapi_bind (rc = 0 - Success)
    *LDAP DB Task 1: Jan 18 12:08:21.925: LDAP server 1 changed state to CONNECTED
    *LDAP DB Task 1: Jan 18 12:08:21.925: disabled LDAP_OPT_REFERRALS*LDAP DB Task 1: Jan 18 12:08:21.925: LDAP_CLIENT: UID Search (base=DC=group,DC=jenoptik,DC=corp, pattern=(&(objectclass=Person)([email protected])))
    *LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: ldap_search_ext_s returns 0 85
    *LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Returned 2 msgs including 0 references
    *LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Returned msg 1 type 0x64
    *LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Received 1 attributes in search entry msg
    *LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT: Returned msg 2 type 0x65
    *LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT : No matched DN
    *LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT : Check result error 0 rc 1013
    *LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT: Received no referrals in search result msg
    *LDAP DB Task 1: Jan 18 12:08:21.927: ldapAuthRequest [1] called lcapi_query base="DC=group,DC=jenoptik,DC=corp" type="Person" attr="userPrincipalName" user="[email protected]" (rc = 0 - Success)
    *LDAP DB Task 1: Jan 18 12:08:21.927: LDAP ATTR> dn = CN=Tschentscher\, Andre,OU=Users,OU=SSC,OU=JOAG,DC=group,DC=jenoptik,DC=corp (size 76)
    *LDAP DB Task 1: Jan 18 12:08:21.927: Handling LDAP response Success
    *LDAP DB Task 1: Jan 18 12:08:21.927: 18:3d:a2:0a:ec:bc [Response] Client requested no retries for mobile 18:3D:A2:0A:EC:BC
    *LDAP DB Task 1: Jan 18 12:08:21.927: 18:3d:a2:0a:ec:bc Returning AAA Success for mobile 18:3d:a2:0a:ec:bc
    *LDAP DB Task 1: Jan 18 12:08:21.927: AuthorizationResponse: 0x33a5affc
    *LDAP DB Task 1: Jan 18 12:08:21.927: structureSize................................180*LDAP DB Task 1: Jan 18 12:08:21.927: resultCode...................................0*LDAP DB Task 1: Jan 18 12:08:21.927: protocolUsed.................................0x00000002*LDAP DB Task 1: Jan 18 12:08:21.927: proxyState...................................18:3D:A2:0A:EC:BC-00:00*LDAP DB Task 1: Jan 18 12:08:21.928: Packet contains 2 AVPs:*LDAP DB Task 1: Jan 18 12:08:21.928:     AVP[01] Unknown Attribute 0......................CN=Tschentscher\, Andre,OU=Users,OU=SSC,OU=JOAG,DC=group,DC=jenoptik,DC=corp (76 bytes)*LDAP DB Task 1: Jan 18 12:08:21.928:     AVP[02] User-Name................................Andre.Tschentscher@group.jenoptik.corp (38 bytes)*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: Found context matching MAC address - 319
    *LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: (EAP:319) User credential callback invoked
    *LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: EAP Unable to find password in credentials. Skipped
    *LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: EAP Unable to find wlan in credentials. Skipped
    *LDAP DB Task 1: Jan 18 12:08:21.928: Authenticated bind : Closing the binded session*LDAP DB Task 1: Jan 18 12:08:21.928: ldapClose [1] called lcapi_close (rc = 0 - Success)
    *LDAP DB Task 1: Jan 18 12:08:21.929: LDAP server 1 changed state to IDLE
    *EAP Framework: Jan 18 12:08:21.930: EAP-EVENT: Received event 'EAP_LL_REPLY' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Using credential profile name: [email protected] (0x78000041)
    *EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Maximum EAP packet size: 1000
    *EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Sending method new context directive for EAP context 0x78000041
    *EAP Framework: Jan 18 12:08:21.930: EAP-EVENT: Sending method directive 'New Context' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:21.930: eap_fast.c-EVENT: New context (EAP handle = 0x78000041)
    *EAP Framework: Jan 18 12:08:21.931: id_manager.c-AUTH-SM: Got new ID f700000e - id_get
    *EAP Framework: Jan 18 12:08:21.931: eap_fast.c-EVENT: Allocated new EAP-FAST context (handle = 0xF700000E)
    *EAP Framework: Jan 18 12:08:21.931: EAP-AUTH-EVENT: Sending method data for context 0x78000041
    *EAP Framework: Jan 18 12:08:21.931: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
    *EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Received Identity
    *EAP Framework: Jan 18 12:08:21.931: eap_fast_tlv.c-AUTH-EVENT: Adding PAC A-ID TLV (436973636f0000000000000000000000)
    *EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Sending Start
    *EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-SM: Changing state: Reset -> Start
    *EAP Framework: Jan 18 12:08:21.931: eap_fast.c:2367: eap-fast tx packet:
    *EAP Framework: Jan 18 12:08:21.931: eap_fast.c:138: Version: 1  Flags:S  Length:0x0014
    *EAP Framework: Jan 18 12:08:21.931: eap_core.c:1422:     Payload:  00040010436973636F00000000000000 ...
    *EAP Framework: Jan 18 12:08:21.931: eap_fast.c-TX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:21.931: eap_core.c:1484: Code:REQUEST  ID:0x 0  Length:0x001a  Type:FAST
    *EAP Framework: Jan 18 12:08:21.932: eap_core.c:1422:     Payload:  2100040010436973636F000000000000 ...
    *EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: EAP method state: Continue
    *EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: EAP method decision: Unknown
    *EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: Current method = 43
    *EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
    *EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-TX-PAK:
    *EAP Framework: Jan 18 12:08:21.932: eap_core.c:1484: Code:REQUEST  ID:0x 2  Length:0x001a  Type:FAST
    *EAP Framework: Jan 18 12:08:21.932: eap_core.c:1422:     Payload:  2100040010436973636F000000000000 ...
    *EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Started EAP tick timer
    *EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:21.932: LOCAL_AUTH: Found matching context for id - 319
    *EAP Framework: Jan 18 12:08:21.932: LOCAL_AUTH: (EAP:319) transmit event
    *EAP Framework: Jan 18 12:08:21.932: AuthorizationResponse: 0x13c713fc
    *EAP Framework: Jan 18 12:08:21.933: structureSize................................74*EAP Framework: Jan 18 12:08:21.933: resultCode...................................255*EAP Framework: Jan 18 12:08:21.933: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:21.933: proxyState...................................18:3D:A2:0A:EC:BC-02:00*EAP Framework: Jan 18 12:08:21.934: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:21.934: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 1a
    *EAP Framework: Jan 18 12:08:21.934: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
    *aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: EAP: Received an auth request
    *aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: Found context matching MAC address - 319
    *aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 2) to EAP subsys
    *EAP Framework: Jan 18 12:08:22.291: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-RX-PAK:
    *EAP Framework: Jan 18 12:08:22.291: eap_core.c:1484: Code:RESPONSE  ID:0x 2  Length:0x0042  Type:FAST
    *EAP Framework: Jan 18 12:08:22.291: eap_core.c:1422:     Payload:  810000003816030100330100002F0301 ...
    *EAP Framework: Jan 18 12:08:22.291: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
    *EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: EAP Response type = Method (43)
    *EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: Sending method data for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.292: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.292: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
    *EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
    *EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-RX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:22.292: eap_core.c:1484: Code:RESPONSE  ID:0x 2  Length:0x0042  Type:FAST
    *EAP Framework: Jan 18 12:08:22.292: eap_core.c:1422:     Payload:  810000003816030100330100002F0301 ...
    *EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-AUTH-EVENT: Received TLS record type: Handshake in state: Start
    *EAP Framework: Jan 18 12:08:22.292: EAP-EVENT: Sending lower layer event 'EAP_GET_CREDENTIAL_PROFILE_FROM_PROFILE_NAME' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.292: LOCAL_AUTH: Found matching context for id - 319
    *EAP Framework: Jan 18 12:08:22.292: LOCAL_AUTH: (EAP:319) Returning profile '[email protected]' (username '[email protected]')
    *EAP Framework: Jan 18 12:08:22.293: IOS_PKI_SHIM: [StartSession] - New session 0x335ee108 started (TP = 'vendor')
    *EAP Framework: Jan 18 12:08:22.293: IOS_PKI_SHIM: [StartSession] - Trustpoint identity (cert) set to 'Vendor'
    *EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Subject : C=DE, ST=Thuringia, L=Jena, O=Jenoptik AG, OU=Jenoptik SSC GmbH, CN=Cisco WLC 1st, [email protected]
    *EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Issuer : DC=corp, DC=jenoptik, CN=Jenoptik WLAN Certificate Authority
    *EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Valid from '2012 Jan 12th, 17:06:50 GMT' to '2016 Jan 11th, 17:06:50 GMT'
    *EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Is not a CA cert
    *EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: Added cert (type 1) to chain (1 present on chain)
    *EAP Framework: Jan 18 12:08:22.300: IOS_PKI_SHIM: [CA-CERT] Subject : DC=corp, DC=jenoptik, CN=Jenoptik WLAN Certificate Authority
    *EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Issuer : CN=Jenoptik Certificate Authority
    *EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Valid from '2012 Jan 12th, 16:54:49 GMT' to '2020 Jan 12th, 17:04:49 GMT'
    *EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Is a CA cert
    *EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: Added cert (type 2) to chain (2 present on chain)
    *EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [StartSession] - Getting older style priv key
    *EAP Framework: Jan 18 12:08:22.338: IOS_PKI_SHIM: Session 0x335ee108 init'd OK
    *EAP Framework: Jan 18 12:08:22.338: eap_fast_auth.c-AUTH-EVENT: Local certificate found
    *EAP Framework: Jan 18 12:08:22.339: eap_fast_auth.c-AUTH-EVENT: Reading Client Hello handshake
    *EAP Framework: Jan 18 12:08:22.339: eap_fast.c:286: EAP-FAST-AUTH-RX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.339: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x0033
    *EAP Framework: Jan 18 12:08:22.339: eap_core.c:1422:     Payload:  0100002F03014F16A8262631FC9DC042 ...
    *EAP Framework: Jan 18 12:08:22.340: eap_fast.c:202: Handshake type:Client Hello  Length:0x002F
    *EAP Framework: Jan 18 12:08:22.340: eap_core.c:1422:     Payload:  03014F16A8262631FC9DC042253D3E24 ...
    *EAP Framework: Jan 18 12:08:22.340: eap_fast_auth.c-AUTH-EVENT: TLS_RSA_WITH_AES_128 proposed...
    *EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA proposed...
    *EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_RSA_WITH_RC4_128 proposed...
    *EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_DH_anon_WITH_AES_128_CBC_SHA proposed...
    *EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: Proposed ciphersuite(s):
    *EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT:     TLS_RSA_WITH_AES_128_CBC_SHA
    *EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT:     TLS_DHE_RSA_WITH_AES_128_CBC_SHA
    *EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT:     TLS_RSA_WITH_RC4_128_SHA
    *EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT:     TLS_DH_anon_WITH_AES_128_CBC_SHA
    *EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: Selected ciphersuite:
    *EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT:     TLS_DHE_RSA_WITH_AES_128_CBC_SHA
    *EAP Framework: Jan 18 12:08:22.343: eap_fast_auth.c-AUTH-EVENT: Building Provisioning Server Hello
    *EAP Framework: Jan 18 12:08:22.344: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.344: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x002A
    *EAP Framework: Jan 18 12:08:22.344: eap_core.c:1422:     Payload:  0200002603015F3325EADF12E6296F91 ...
    *EAP Framework: Jan 18 12:08:22.344: eap_fast.c:202: Handshake type:Server Hello  Length:0x0026
    *EAP Framework: Jan 18 12:08:22.345: eap_core.c:1422:     Payload:  03015F3325EADF12E6296F91530FE67F ...
    *EAP Framework: Jan 18 12:08:22.345: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.345: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x0B54
    *EAP Framework: Jan 18 12:08:22.346: eap_core.c:1422:     Payload:  0B000B50000B4D00059F3082059B3082 ...
    *EAP Framework: Jan 18 12:08:22.346: eap_fast.c:202: Handshake type:Certificate  Length:0x0B50
    *EAP Framework: Jan 18 12:08:22.346: eap_core.c:1422:     Payload:  000B4D00059F3082059B30820483A003 ...
    *EAP Framework: Jan 18 12:08:22.347: eap_fast_crypto.c-EVENT: Starting Diffie Hellman phase 1 ...
    *EAP Framework: Jan 18 12:08:22.661: eap_fast_crypto.c-EVENT: Diffie Hellman phase 1 complete
    *EAP Framework: Jan 18 12:08:22.677: IOS_PKI_SHIM: PKI_SignMessage PostHashEncrypt ret SUCCESS.. op_len 128
    *EAP Framework: Jan 18 12:08:22.678: eap_fast_auth.c-AUTH-EVENT: DH signature length = 128
    *EAP Framework: Jan 18 12:08:22.678: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.678: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x028D
    *EAP Framework: Jan 18 12:08:22.679: eap_core.c:1422:     Payload:  0C0002890100FFFFFFFFFFFFFFFFC90F ...
    *EAP Framework: Jan 18 12:08:22.679: eap_fast.c:202: Handshake type:Server Key Exchange  Length:0x0289
    *EAP Framework: Jan 18 12:08:22.679: eap_core.c:1422:     Payload:  0100FFFFFFFFFFFFFFFFC90FDAA22168 ...
    *EAP Framework: Jan 18 12:08:22.679: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.680: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x000B
    *EAP Framework: Jan 18 12:08:22.680: eap_core.c:1422:     Payload:  0D00000704030401020000
    *EAP Framework: Jan 18 12:08:22.680: eap_fast.c:202: Handshake type:Certificate Request  Length:0x0007
    *EAP Framework: Jan 18 12:08:22.680: eap_core.c:1422:     Payload:  04030401020000
    *EAP Framework: Jan 18 12:08:22.681: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.681: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x0004
    *EAP Framework: Jan 18 12:08:22.681: eap_core.c:1422:     Payload:  0E000000
    *EAP Framework: Jan 18 12:08:22.681: eap_fast.c:202: Handshake type:Server Done  Length:0x0000
    *EAP Framework: Jan 18 12:08:22.682: eap_fast_auth.c-AUTH-EVENT: Sending Provisioning Serving Hello
    *EAP Framework: Jan 18 12:08:22.682: eap_fast_auth.c-AUTH-SM: Changing state: Start -> Sent provisioning Server Hello
    *EAP Framework: Jan 18 12:08:22.682: eap_fast.c-EVENT: Tx packet fragmentation required
    *EAP Framework: Jan 18 12:08:22.683: eap_fast.c:2367: eap-fast tx packet:
    *EAP Framework: Jan 18 12:08:22.683: eap_fast.c:138: Version: 1  Flags:LM  Length:0x03DE
    *EAP Framework: Jan 18 12:08:22.683: eap_core.c:1422:     Payload:  160301002A0200002603015F3325EADF ...
    *EAP Framework: Jan 18 12:08:22.684: eap_fast.c-TX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:22.684: eap_core.c:1484: Code:REQUEST  ID:0x 0  Length:0x03e8  Type:FAST
    *EAP Framework: Jan 18 12:08:22.684: eap_core.c:1422:     Payload:  C100000E33160301002A020000260301 ...
    *EAP Framework: Jan 18 12:08:22.684: EAP-AUTH-EVENT: EAP method state: Continue
    *EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: EAP method decision: Unknown
    *EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: Current method = 43
    *EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-TX-PAK:
    *EAP Framework: Jan 18 12:08:22.685: eap_core.c:1484: Code:REQUEST  ID:0x 3  Length:0x03e8  Type:FAST
    *EAP Framework: Jan 18 12:08:22.686: eap_core.c:1422:     Payload:  C100000E33160301002A020000260301 ...
    *EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Started EAP tick timer
    *EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.686: LOCAL_AUTH: Found matching context for id - 319
    *EAP Framework: Jan 18 12:08:22.687: LOCAL_AUTH: (EAP:319) transmit event
    *EAP Framework: Jan 18 12:08:22.687: AuthorizationResponse: 0x13c713fc
    *EAP Framework: Jan 18 12:08:22.687: structureSize................................1048*EAP Framework: Jan 18 12:08:22.687: resultCode...................................255*EAP Framework: Jan 18 12:08:22.687: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.688: proxyState...................................18:3D:A2:0A:EC:BC-02:01*EAP Framework: Jan 18 12:08:22.688: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.688: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 3e8
    *EAP Framework: Jan 18 12:08:22.688: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
    *aaaQueueReader: Jan 18 12:08:22.700: LOCAL_AUTH: EAP: Received an auth request
    *aaaQueueReader: Jan 18 12:08:22.701: LOCAL_AUTH: Found context matching MAC address - 319
    *aaaQueueReader: Jan 18 12:08:22.701: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 3) to EAP subsys
    *EAP Framework: Jan 18 12:08:22.701: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.701: EAP-AUTH-RX-PAK:
    *EAP Framework: Jan 18 12:08:22.702: eap_core.c:1484: Code:RESPONSE  ID:0x 3  Length:0x0006  Type:FAST
    *EAP Framework: Jan 18 12:08:22.702: eap_core.c:1422:     Payload:  01
    *EAP Framework: Jan 18 12:08:22.702: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.703: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
    *EAP Framework: Jan 18 12:08:22.703: EAP-AUTH-EVENT: EAP Response type = Method (43)
    *EAP Framework: Jan 18 12:08:22.703: EAP-AUTH-EVENT: Sending method data for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.704: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.704: eap_fast.c-AUTH-EVENT: eap_fast_rx_packet(): EAP Fast NoData (0x2b)
    *EAP Framework: Jan 18 12:08:22.704: eap_fast.c:2367: eap-fast tx packet:
    *EAP Framework: Jan 18 12:08:22.704: eap_fast.c:138: Version: 1  Flags:M  Length:0x03E2
    *EAP Framework: Jan 18 12:08:22.705: eap_core.c:1422:     Payload:  3A2F2F2F434E3D4A656E6F7074696B25 ...
    *EAP Framework: Jan 18 12:08:22.705: eap_fast.c-TX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:22.705: eap_core.c:1484: Code:REQUEST  ID:0x 0  Length:0x03e8  Type:FAST
    *EAP Framework: Jan 18 12:08:22.705: eap_core.c:1422:     Payload:  413A2F2F2F434E3D4A656E6F7074696B ...
    *EAP Framework: Jan 18 12:08:22.706: EAP-AUTH-EVENT: EAP method state: Continue
    *EAP Framework: Jan 18 12:08:22.706: EAP-AUTH-EVENT: EAP method decision: Unknown
    *EAP Framework: Jan 18 12:08:22.706: EAP-AUTH-EVENT: Current method = 43
    *EAP Framework: Jan 18 12:08:22.706: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.707: EAP-AUTH-TX-PAK:
    *EAP Framework: Jan 18 12:08:22.707: eap_core.c:1484: Code:REQUEST  ID:0x 4  Length:0x03e8  Type:FAST
    *EAP Framework: Jan 18 12:08:22.707: eap_core.c:1422:     Payload:  413A2F2F2F434E3D4A656E6F7074696B ...
    *EAP Framework: Jan 18 12:08:22.707: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.708: EAP-EVENT: Started EAP tick timer
    *EAP Framework: Jan 18 12:08:22.708: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.708: LOCAL_AUTH: Found matching context for id - 319
    *EAP Framework: Jan 18 12:08:22.708: LOCAL_AUTH: (EAP:319) transmit event
    *EAP Framework: Jan 18 12:08:22.709: AuthorizationResponse: 0x13c713fc
    *EAP Framework: Jan 18 12:08:22.709: structureSize................................1048*EAP Framework: Jan 18 12:08:22.709: resultCode...................................255*EAP Framework: Jan 18 12:08:22.709: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.710: proxyState...................................18:3D:A2:0A:EC:BC-02:02*EAP Framework: Jan 18 12:08:22.710: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.710: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 3e8
    *EAP Framework: Jan 18 12:08:22.711: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
    *aaaQueueReader: Jan 18 12:08:22.723: LOCAL_AUTH: EAP: Received an auth request
    *aaaQueueReader: Jan 18 12:08:22.723: LOCAL_AUTH: Found context matching MAC address - 319
    *aaaQueueReader: Jan 18 12:08:22.724: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 4) to EAP subsys
    *EAP Framework: Jan 18 12:08:22.724: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.725: EAP-AUTH-RX-PAK:
    *EAP Framework: Jan 18 12:08:22.725: eap_core.c:1484: Code:RESPONSE  ID:0x 4  Length:0x0006  Type:FAST
    *EAP Framework: Jan 18 12:08:22.725: eap_core.c:1422:     Payload:  01
    *EAP Framework: Jan 18 12:08:22.725: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.726: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
    *EAP Framework: Jan 18 12:08:22.726: EAP-AUTH-EVENT: EAP Response type = Method (43)
    *EAP Framework: Jan 18 12:08:22.726: EAP-AUTH-EVENT: Sending method data for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.726: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.727: eap_fast.c-AUTH-EVENT: eap_fast_rx_packet(): EAP Fast NoData (0x2b)
    *EAP Framework: Jan 18 12:08:22.727: eap_fast.c:2367: eap-fast tx packet:
    *EAP Framework: Jan 18 12:08:22.727: eap_fast.c:138: Version: 1  Flags:M  Length:0x03E2
    *EAP Framework: Jan 18 12:08:22.728: eap_core.c:1422:     Payload:  BD84CC4BF49A766267DA94429BEBE087 ...
    *EAP Framework: Jan 18 12:08:22.728: eap_fast.c-TX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:22.728: eap_core.c:1484: Code:REQUEST  ID:0x 0  Length:0x03e8  Type:FAST
    *EAP Framework: Jan 18 12:08:22.728: eap_core.c:1422:     Payload:  41BD84CC4BF49A766267DA94429BEBE0 ...
    *EAP Framework: Jan 18 12:08:22.729: EAP-AUTH-EVENT: EAP method state: Continue
    *EAP Framework: Jan 18 12:08:22.729: EAP-AUTH-EVENT: EAP method decision: Unknown
    *EAP Framework: Jan 18 12:08:22.729: EAP-AUTH-EVENT: Current method = 43
    *EAP Framework: Jan 18 12:08:22.729: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.730: EAP-AUTH-TX-PAK:
    *EAP Framework: Jan 18 12:08:22.730: eap_core.c:1484: Code:REQUEST  ID:0x 5  Length:0x03e8  Type:FAST
    *EAP Framework: Jan 18 12:08:22.730: eap_core.c:1422:     Payload:  41BD84CC4BF49A766267DA94429BEBE0 ...
    *EAP Framework: Jan 18 12:08:22.731: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.731: EAP-EVENT: Started EAP tick timer
    *EAP Framework: Jan 18 12:08:22.731: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.731: LOCAL_AUTH: Found matching context for id - 319
    *EAP Framework: Jan 18 12:08:22.732: LOCAL_AUTH: (EAP:319) transmit event
    *EAP Framework: Jan 18 12:08:22.732: AuthorizationResponse: 0x13c713fc
    *EAP Framework: Jan 18 12:08:22.732: structureSize................................1048*EAP Framework: Jan 18 12:08:22.732: resultCode...................................255*EAP Framework: Jan 18 12:08:22.733: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.733: proxyState...................................18:3D:A2:0A:EC:BC-02:03*EAP Framework: Jan 18 12:08:22.733: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.734: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 3e8
    *EAP Framework: Jan 18 12:08:22.734: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
    *aaaQueueReader: Jan 18 12:08:22.746: LOCAL_AUTH: EAP: Received an auth request
    *aaaQueueReader: Jan 18 12:08:22.747: LOCAL_AUTH: Found context matching MAC address - 319
    *aaaQueueReader: Jan 18 12:08:22.747: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 5) to EAP subsys
    *EAP Framework: Jan 18 12:08:22.747: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.747: EAP-AUTH-RX-PAK:
    *EAP Framework: Jan 18 12:08:22.748: eap_core.c:1484: Code:RESPONSE  ID:0x 5  Length:0x0006  Type:FAST
    *EAP Framework: Jan 18 12:08:22.748: eap_core.c:1422:     Payload:  01
    *EAP Framework: Jan 18 12:08:22.748: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.749: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
    *EAP Framework: Jan 18 12:08:22.749: EAP-AUTH-EVENT: EAP Response type = Method (43)
    *EAP Framework: Jan 18 12:08:22.749: EAP-AUTH-EVENT: Sending method data for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.750: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.750: eap_fast.c-AUTH-EVENT: eap_fast_rx_packet(): EAP Fast NoData (0x2b)
    *EAP Framework: Jan 18 12:08:22.750: eap_fast.c:2367: eap-fast tx packet:
    *EAP Framework: Jan 18 12:08:22.750: eap_fast.c:138: Version: 1  Flags:  Length:0x0291
    *EAP Framework: Jan 18 12:08:22.751: eap_core.c:1422:     Payload:  34C4C6628B80DC1CD129024E088A67CC ...
    *EAP Framework: Jan 18 12:08:22.751: eap_fast.c-TX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:22.751: eap_core.c:1484: Code:REQUEST  ID:0x 0  Length:0x0297  Type:FAST
    *EAP Framework: Jan 18 12:08:22.751: eap_core.c:1422:     Payload:  0134C4C6628B80DC1CD129024E088A67 ...
    *EAP Framework: Jan 18 12:08:22.751: EAP-AUTH-EVENT: EAP method state: Continue
    *EAP Framework: Jan 18 12:08:22.751: EAP-AUTH-EVENT: EAP method decision: Unknown
    *EAP Framework: Jan 18 12:08:22.752: EAP-AUTH-EVENT: Current method = 43
    *EAP Framework: Jan 18 12:08:22.752: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.752: EAP-AUTH-TX-PAK:
    *EAP Framework: Jan 18 12:08:22.752: eap_core.c:1484: Code:REQUEST  ID:0x 6  Length:0x0297  Type:FAST
    *EAP Framework: Jan 18 12:08:22.752: eap_core.c:1422:     Payload:  0134C4C6628B80DC1CD129024E088A67 ...
    *EAP Framework: Jan 18 12:08:22.753: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.753: EAP-EVENT: Started EAP tick timer
    *EAP Framework: Jan 18 12:08:22.753: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.753: LOCAL_AUTH: Found matching context for id - 319
    *EAP Framework: Jan 18 12:08:22.753: LOCAL_AUTH: (EAP:319) transmit event
    *EAP Framework: Jan 18 12:08:22.754: AuthorizationResponse: 0x13c713fc
    *EAP Framework: Jan 18 12:08:22.754: structureSize................................711*EAP Framework: Jan 18 12:08:22.754: resultCode...................................255*EAP Framework: Jan 18 12:08:22.754: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.754: proxyState...................................18:3D:A2:0A:EC:BC-02:04*EAP Framework: Jan 18 12:08:22.754: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.755: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 297
    *EAP Framework: Jan 18 12:08:22.755: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
    *aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: EAP: Received an auth request
    *aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: Found context matching MAC address - 319
    *aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 6) to EAP subsys
    *EAP Framework: Jan 18 12:08:22.831: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.831: EAP-AUTH-RX-PAK:
    *EAP Framework: Jan 18 12:08:22.831: eap_core.c:1484: Code:RESPONSE  ID:0x 6  Length:0x015c  Type:FAST
    *EAP Framework: Jan 18 12:08:22.831: eap_core.c:1422:     Payload:  810000015216030100070B0000030000 ...
    *EAP Framework: Jan 18 12:08:22.831: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.831: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
    *EAP Framework: Jan 18 12:08:22.832: EAP-AUTH-EVENT: EAP Response type = Method (43)
    *EAP Framework: Jan 18 12:08:22.832: EAP-AUTH-EVENT: Sending method data for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.832: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.832: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
    *EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
    *EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-RX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:22.832: eap_core.c:1484: Code:RESPONSE  ID:0x 6  Length:0x015c  Type:FAST
    *EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422:     Payload:  810000015216030100070B0000030000 ...
    *EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Received TLS record type: Handshake in state: Sent provisioning Server Hello
    *EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Reading Client Certificate handshake
    *EAP Framework: Jan 18 12:08:22.832: eap_fast.c:286: EAP-FAST-AUTH-RX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.832: eap_fast.c:255: Content:Handshake  Version:0301  Length:0x0007
    *EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422:     Payload:  0B000003000000
    *EAP Framework: Jan 18 12:08:22.832: eap_fast.c:202: Handshake type:Certificate  Length:0x0003
    *EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422:     Payload:  000000
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c-EVENT: Client Certificate handshake empty
    *EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-EVENT: Rx'd I-ID: "EAP-FAST I-ID" from Peer Cert
    *EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-ERROR: Required cert not provided by client
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c:255: Content:Alert  Version:0301  Length:0x0002
    *EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422:     Payload:  0228
    *EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-SM: Changing state: Sent provisioning Server Hello -> Alert
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c:2367: eap-fast tx packet:
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c:138: Version: 1  Flags:L  Length:0x0007
    *EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422:     Payload:  15030100020228
    *EAP Framework: Jan 18 12:08:22.833: eap_fast.c-TX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:22.833: eap_core.c:1484: Code:REQUEST  ID:0x 0  Length:0x0011  Type:FAST
    *EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422:     Payload:  810000000715030100020228
    *EAP Framework: Jan 18 12:08:22.833: EAP-AUTH-EVENT: EAP method state: Continue
    *EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: EAP method decision: Fail
    *EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: Current method = 43
    *EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-TX-PAK:
    *EAP Framework: Jan 18 12:08:22.834: eap_core.c:1484: Code:REQUEST  ID:0x 7  Length:0x0011  Type:FAST
    *EAP Framework: Jan 18 12:08:22.834: eap_core.c:1422:     Payload:  810000000715030100020228
    *EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Started EAP tick timer
    *EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.834: LOCAL_AUTH: Found matching context for id - 319
    *EAP Framework: Jan 18 12:08:22.834: LOCAL_AUTH: (EAP:319) transmit event
    *EAP Framework: Jan 18 12:08:22.834: AuthorizationResponse: 0x13c713fc
    *EAP Framework: Jan 18 12:08:22.834: structureSize................................65*EAP Framework: Jan 18 12:08:22.834: resultCode...................................255*EAP Framework: Jan 18 12:08:22.835: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.835: proxyState...................................18:3D:A2:0A:EC:BC-02:05*EAP Framework: Jan 18 12:08:22.835: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.835: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 11
    *EAP Framework: Jan 18 12:08:22.835: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
    *aaaQueueReader: Jan 18 12:08:22.838: LOCAL_AUTH: EAP: Received an auth request
    *aaaQueueReader: Jan 18 12:08:22.838: LOCAL_AUTH: Found context matching MAC address - 319
    *aaaQueueReader: Jan 18 12:08:22.838: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 7) to EAP subsys
    *EAP Framework: Jan 18 12:08:22.838: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.839: EAP-AUTH-RX-PAK:
    *EAP Framework: Jan 18 12:08:22.839: eap_core.c:1484: Code:RESPONSE  ID:0x 7  Length:0x0006  Type:FAST
    *EAP Framework: Jan 18 12:08:22.839: eap_core.c:1422:     Payload:  01
    *EAP Framework: Jan 18 12:08:22.839: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.839: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
    *EAP Framework: Jan 18 12:08:22.839: EAP-AUTH-EVENT: EAP Response type = Method (43)
    *EAP Framework: Jan 18 12:08:22.839: EAP-AUTH-EVENT: Sending method data for context 0x78000041
    *EAP Framework: Jan 18 12:08:22.839: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.839: eap_fast.c-AUTH-EVENT: eap_fast_rx_packet(): EAP Fast NoData (0x2b)
    *EAP Framework: Jan 18 12:08:22.840: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
    *EAP Framework: Jan 18 12:08:22.840: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
    *EAP Framework: Jan 18 12:08:22.840: eap_fast_auth.c-RX-AUTH-PAK:
    *EAP Framework: Jan 18 12:08:22.840: eap_core.c:1484: Code:RESPONSE  ID:0x 7  Length:0x0006  Type:FAST
    *EAP Framework: Jan 18 12:08:22.840: eap_core.c:1422:     Payload:  01
    *EAP Framework: Jan 18 12:08:22.840: eap_fast_auth.c-AUTH-EVENT: Received ACK from peer
    *EAP Framework: Jan 18 12:08:22.840: EAP-AUTH-EVENT: EAP method state: Done
    *EAP Framework: Jan 18 12:08:22.840: EAP-AUTH-EVENT: EAP method decision: Fail
    *EAP Framework: Jan 18 12:08:22.840: EAP-EVENT: Received get canned status from lower layer (0x78000041)
    *EAP Framework: Jan 18 12:08:22.840: EAP-EVENT: Sending method directive 'Free Context' on handle 0x78000041
    *EAP Framework: Jan 18 12:08:22.840: eap_fast.c-EVENT: Free context (EAP handle = 0x78000041)
    *EAP Framework: Jan 18 12:08:22.840: id_manager.c-AUTH-SM: Entry deleted fine id f700000e - id_delete
    *EAP Framework: Jan 18 12:08:22.840: IOS_PKI_SHIM: Session 0x335ee108 deleted
    *EAP Framework: Jan 18 12:08:2

    Now we found the reason.
    The WLC doesn´t work with the Sub CA respectively with chain certificates for device authentication.
    "Support for Chained Certificate
    In controller versions earlier than 5.1.151.0, web authentication  certificates can be only device certificates and should not contain the  CA roots chained to the device certificate (no chained certificates).
    With controller version 5.1.151.0 and later, the controller allows  for the device certificate to be downloaded as a chained certificate for  web authentication.
    Certificate Levels
    Level 0—Use of only a server certificate on WLC.
    Level 1—Use of server certificate on WLC and a CA root certificate.
    Level 2—Use of server certificate on WLC, one single CA intermediate certificate, and a CA root certificate.
    Level 3—Use of server certificate on WLC, two CA intermediate certificates, and a CA root certificate.
    WLC does not support chained certificates more than 10KB size on the WLC.
    Note: Chained certificates are supported for web authentication only; they are not supported for the management certificate."
    So the WLC can´t decode the peer certificate.

Maybe you are looking for

  • Serious problems accessing iTunes 10 store and account

    It's been 2 days now that I can't access neither my iTunes account nor the store. Each time I try I instantly get this message: "iTunes could not connect to the iTunes Store. The network connection was lost. Make sure your network connection is activ

  • ERROR   OGG-01296,OCI Error ORA-01400

    Discarded record from action ABEND on error 1400 OCI Error ORA-01400: cannot insert NULL into ("SICK"."SI _RECORD"."CARD_TYPE") (status = 1400), SQL <INSERT INTO "SICK"."SI_CARD_RECORD" ("ORG_ID","CARD_NO","MODIFY_TIME","MODIFY_OPERATOR","REMARK") VA

  • Printing error in smartform

    Hii , I designed a smartform for purchase order,if the form has 10 materials in it the taxes are also printing individually for each material...for example if 10 materials in that form has cess,bed,ecess ,the taxes are printing individually for each

  • Trouble Connecting to FMS in the Amazon Cloud

    I get the following error message when I try to connect to and stream videos that I have uploaded to the Amazon Cloud (AWS Streaming Distribution) using the basic Strobe Media Playback: Connection attempt rejected by FMS server Connection failed. How

  • Documents open in separate Acrobat Window  Acrobat 9 Pro

    When I open multiple documents in Acrobat 9 Pro Extended, each opens in a separate window. In Acrobat 6 Pro, all files opened in the same window, & I could select which was displayed in the 'window' menu, or I could cascade or tile the documents. Can