Airport Extreme / Apple TV Connectivity issue -HELP!!

I am able to enter my WEP password on the Apple TV, and it connects to my wireless network. But, the next day, it doesn't show up in my list of devices on iTunes. I look at the setings on the apple TV, and it says I am not connected to network, and I have to enter password again. What setting do I need to adjust on the Airport Extreme or the Apple TV?

I have the same issue. Wish I could help.... It is ridiculously annoying to have to put in the password every day, yet it is all I can do!
I dont understand... even if it drops the connection to the TC, why cant it reconnect on its own like computers do?

Similar Messages

Airport Extreme 802.11n connectivity issues with Windows Vista

I recently purchased the 802.11n airport exterme base station and set it up using my MacBook Pro laptop. During the configuration process I set the security to be WEP enabled since there are other computers on my network, one of which has only an 802.11b wifi card, that can only accept WEP security protocol. The set up worked great and I was surfing on the internet with my Mac in no time.
When I go to connect to the 802.11n extreme base station with my Windows Vista desktop PC, I cannot get any type of connection. I re-entered the Network SSID to match that on the AE base station and re-entered the WEP enabled password.
Is there a compatibility issue between the Airport Extreme Base Station and Windows Vista? I realize that the base station works on XP based PCs but not sure why it could not work on a Vista machine. Any help anyone can offer would be greatly appreciated.
MacBook Pro Mac OS X (10.4.6) 1.83Ghz Intel Core Duo

Upon further review I determined the flaw with my earlier attempts to set up the airport exterme base station with my winodws vista desktop pc. I realized that I should not use a WEP key but rather a WPA key since the wireless adpater connected to my desktop is a wireless G enabled adapter that can handles WPA and WPA2 security.
Therefore, no issues with Vista and the airport extreme base station. Works great.
MacBook Pro Mac OS X (10.4.6) 1.83Ghz Intel Core Duo

Airport extreme unable to connect to new router

We just received a new router from our cable company. The old router worked with our airport extreme just fine. After hooking up the new router the airport extreme could not connect to it. I received the following error "error occurred while trying to access the apple wireless device. Make sure your connection is valid Error -6753" So then I tried to power off and reset the Airport extreme. The button was stuck on my reset button. I did figure that out and was able to click the button. But even if I would hear the audible click when i held down the reset button the amber light never flashed rapidly? Not sure what else to do. I have turned off the modem, unplugged the router, plugged them back in. etc. I just don't know where to go from here.
Thanks!
jodi

Were you able to get the AirPort Extreme to reset back to factory default settings, as LaPastenague detailed?
The amber light needs to flash rapidly for about 6-8 seconds during the process to indicate that the reset is taking place correctly. Once you release the reset button, the light will stay solid amber for 15-20 seconds or so, then change to slow blinking amber.
We are a bit confused as well, since in your first post you mention that you received a new router from the cable company, then later in the post, you mention that you have a (separate?) modem.
In the most recent post, you mention that you have a new modem. Is the new router from the cable company the same device as the new modem? Or, do you have a new modem and another new router in addition to the AirPort Extreme?
Can you clarify on exactly what devices that you have? Make and model numbers would help. We know that you have an AirPort A1408.

Wired connection to cable modem. Airport extreme has to connect to internet if computer goes to screen saver. Any way around this?

Airport extreme has to connect to internet if computer goes to screen saver. Any way around this?

Describe the issue in more detail.. as it doesn't currently make sense.. the AE should always be connected to the internet. It should never disconnect.. but the computer can fail to connect to wireless after sleep.. that is common problem.
See Tesserax docos if you have wireless connect issues after sleep.
https://discussions.apple.com/docs/DOC-3411

My airport extreme only will connect with computer or ipad not both

my airport extreme only will connect with computer or ipad not both

We need just a bit more information, please before we can begin to accurately troubleshoot this issue.
1) What is the make and model number of your modem?
2) What operating system are you using on the MacBook Pro at this time. Your tagline indicates that you are using OS X (10.4.8), but this is about 6-7 years out of date.
If you are no sure which operating system your Mac is using......click the Apple icon in the upper left corner of the screen, then click About This Mac. Post back with the OS X Version number that you see there.

No Signal with Airport Extreme (Integrated) card - iMac G5 [Help!]

Hello all,
Finally experiencing my first issue with a Mac. I have a Second Generation iMac G5, purchased in June of this year (2005). I have used it's integrated Airport Extreme card to connect to my WLAN since I purchased it, with the only issue being I have to occasionally power cycle my Linksys router to re-enable wireless (When this happens, all of my wireless computers are affected)
This evening, while on my iMac G5, I lost internet connectivity (iTunes was unable to look up CD music track info from the web)..Safari wouldn't load pages either. So i power cycled my wireless router again.
After it came back up, My signal strength stayed at 0 on my iMac. After power cycling the router, turning off/on my Aiport card, and rebooting my mac, my signal strength is still at 0.
I am also using a piece of software called MacStumbler to detect networks and signal strength. Randomly, it's picking up my network: It'll pop up and then dissapear.
I have not moved my iMac this afternoon, or even recently (Since July). I put it to sleep in the evenings. The Airport card is integrated so there's no antenna to come loose.
Any Ideas? Suggestions? Thanks!

Tom, Belbe,
Thanks for your responses. I still dont know what "WAS" causing my Integrated Airport Extreme Problems. I turned my iMac off last night and left it off all morning until around 12 AM CDT or so. When it came up, the wireless worked fine..and has all day.
Belbe, i have the "Put hard disks to sleep whenever possible" un-checked, and have for a while. My wireless went out while my machine was up and running and while i was importing music in iTunes. It may have been my router just not accepting my iMac's MAC address after I power cycled it.
I'll mark this as answered and move along quietly

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced.

My airport extreme will not connect to the Internet

My airport extreme will not connect to my toshiba router. I connected it to my office internet this morning but when I hooked it up at home it simply will not connect. I have tried resetting all the settings and have had no luck. It did work once upon a time. I currently have my airport express hooked up so I know there is connectivity.

I could never figure it out after trying everything I could and going to the genius bar I ended up just purchasing another extreme. The really funny thing is that I can set up a network between the two and it works fine. I am using it at work now with out any problems so I guess there is really no loss :-?

Airport Extreme won't connect with my cable modem (Time Warner)

OK, I'm tired of staring at a blinking amber light. I'm reaching out to anyone out there who's had this problem. I've got everything connected right, the software loaded, the connections set on my laptop (Macbok Pro). But still my Airport Extreme won't connect to the Internet. I've tried different cables, rebooting both my modem and my Airport. For the record, I've had a Mac IT guy from my advertising agency come by my house and make sure that everything's installed and hooked up right. But it still keeps saying that my IP address is invalid, even though I can connect (wired) using the modem.
I suspect I'll just have to take it to the Genius Bar or something. But anybody got any ideas? I really want to join the 'n' generation....
-neil

atotheb, Welcome to the discussion area!
Did you power off the cable modem when switching the Ethernet connection from laptop to AirPort Extreme base station (AEBS)? This is usually required.

Using AirPort Extreme hub to connect to stereo

Is it possible to use a second Airport Extreme hub to connect to stereo speakers?
If it is, what kind of cable might one use to do this?
Thanks
Charles
iBook G4 Mac OS X (10.4)

No, the AirPort Extreme base station (AEBS) does not have any type of audio output.
Are you thinking of the AirPort Express which does have an audio output?

Internet connection is through airport extreme is not connected

internet connection through airport extreme is not connected maybe there is a problem setting it up

Is it possible that using a Netgear Router connected
to the AE (which is also a router if I understand
correctly) could cause connection problems ?
Yes.
Ensure that that the AEBS is configured to not distribute IP addresses.
Also ensure that the AEBS is on a different channel to the DG834G.
iFelix

Make AirPort Extreme share internet connection with Time Capsule

Hello,
This is the situation: in one room there's an old Mac, the modem which delivers the internet and the AirPort Extreme which is connected to the modem.
In another room there's the Mac Pro, the Time Capsule which is connected to the Mac Pro with an ethernet cable and to a printer via USB.
I want the AirPort Extreme to wirelessly share it's internet connection with the Time Capsule so that the Time Capsule can share the printer with all three Macs (old Mac, Mac Pro and Macbook Pro), the Mac Pro can use the Time Capsule for Time Machine functionality and maybe the Macbook Pro too.
And just using the Time Capsule for internet.
How can I do this?
At the moment the AirPort Extreme is disconnected and the Time Capsule is used instead, but this way I can't share the printer...
Thanks!

Is that AirPort Extreme "flat" or dome-shaped? If it's flat (802.11n-capable), you should be able to configure the "main" router to "Allow this network to be extended" and the other to "Join a wireless network". If the Extreme is dome-shaped, then you need a more-complicated "WDS" arrangement. In either case it shouldn't matter much which router plays which role.
I'm not sure what you mean by "And just using the Time Capsule for internet."
Nathan-NL wrote:
At the moment the AirPort Extreme is disconnected and the Time Capsule is used instead, but this way I can't share the printer...
Is the printer connected to the USB port of the Time Capsule? Can you see the printer in the "Printer" panel of AirPort Utility? What happens when you try to use it from one of the Macs?

Airport Extreme-won't connect after the latest Apple software update

My iBook will no longer connect to the wi-fi provider at our marina since the last two security updates to 10.3.
The iBook works just fine with all other wi-fi signals in fact pulls in one that's a half mile away! Yet, it will not connect nor show signal strength with this one wi-fi provider. They haven't changed their signal and it occured immediately after I installed the latest software updates.
When I shut down the computer today, for just a moment, a message flashed "should I grant permission to allow the marina wi-fi to connect". But it was gone before I could "click" on the button. Haven't been able to get that message again. I've tried to re-connect via "Other" and keying in the wi-fi system name and password but no luck.
How can I restore my connection to this wi-fi?
Thanks,
iBook G4 Mac OS X (10.3.9) Airport Extreme
iBook G4 Mac OS X (10.3.9)

I had this issue last month after upgrading Quicktime and downloading a security upgrade. For some reason (which Apple couldn't derive), the upgrades for their products screwed up my Keychain, and the only way to fix it was to reset my Keychain. Like you, I run 10.3.9, and this happened with two different upgrades on both my iBook and my iMac.
The reset process is as follows:
Go to Keychain Access in Utilities
Access Keychain First Aid (under Window menu)
Choose Options
Choose "Reset Keychain"
What a pain...I've stopped downloading upgrades from Apple until this gets resolved. Of course, that's not a good "solution" either.
John

External HDs connected to Airport Extreme and Imovie / Iphoto issues

I recently purchased a WD mac edition "my book" hardrive in order to store all my imovie, iphoto and itunes files externally. I connected the hard drive to my airport extreme base station but was unable to move my imovie files to the hard drive. Instead I received some derivation of the following message - "volume not compatible." After being transferred to a number of different people at apple support, I was finally told that the imovie, iphoto etc... are not compatible with hard drives that are connected wirelessly. I cannot believe that this is the case (presumably imovie files can be saved on timecapsule). I would be most grateful if someone could help me out here.

I was finally told that the imovie, iphoto etc... are not compatible with hard drives that are connected wirelessly. I cannot believe that this is the case
Nor can I. Files are files, some are bigger than others but to a hard disk, they're all the same.
I would presume that you don't get this message when connecting your My Book directly to the computer's USB port?
Apple Support simply couldn't have understood you correctly. I wouldn't expect to use iMovie or iPhoto to manipulate remotely stored files, but merely copying them for archival purposes is a completely legitimate use for the external HD.
This makes no sense. Perhaps you could post your question in an iLife forum.

Has anyone had issues with the airport extreme 802.11 connecting with a linksys SPA941 phone?

Got the new AirPort Extreme. Trying to connect my Linksys SPA941 phone to it. Mute button flashes so call receiver cannot hear me. Tested wires..All good. Changed modem..All good. Had same issue with Linksys router EA4500 i just traded in. Hoped to fix the issue with Airport. Same issue is occuring.

One more thing. I was using the Linksys WRT54G2 router before. Did not have any issues. It was going bad on me.

Airport Extreme / Apple TV Connectivity issue -HELP!!

Similar Messages

Maybe you are looking for