ALE Problem inter SAP system
Dear Expert,
I am a fresher in ALE. I have configure ALE in my Development and Q/A system. Dev system as sender and Q/A as receiver.
When I try to send GL account master data from Dev to Q/A, I have problem. I cannot see my GL Account in Q/A system. In sender, I see the log and found that IDoc status is ok.
Regards,
MAL
Hello MAL,
Please ensure that the user id in TRFC LUW has proper authorizations.Additonally also ensure the user in target group has proper authorizations Please give them autorizations not only to create and process idocs (S_IDOC* authorization objects) Also authorizations to create and change GL accounts (F_SKA1_BUK,F_SKA1_KTP etc. authorization objects) should be given to the user involved in QA system (this user is same as in the RFC destination for QA) If this is a system or communication user then SAP_ALL can be given. Do that and then process the TRFC queue.
Regards.
Ruchit.
Similar Messages
-
Problem in SAP system after ECC 6.0 installation
Hi SAP Gurus,
I have been installing ECC 6.0 with database as ORACLE on Sun Solaris SPARC 64-bit.
I m currently stuck at the phase 27,when the SAP instance is started.
My SAP system is not coming up.
I have checked all profiles with sappfpar pf=<profile> check and none of them are giving errors.they are giving only warnings.
I am hereby pasting the dev_ms,dev_disp & dev_w0 files:
dev_ms:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Wed Oct 22 14:28:09 2008
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 19059
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 19059) [msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] load acl file = /usr/sap/DBM/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [10.48.152.173] gmsc2 (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 1] MsHttpInit: full qualified hostname = gmsc2.in.capgemini.com
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] MsHttpOwnDomain: own domain[1] = in.capgemini.com
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsDBM (3600) ***
[Thr 1] *** I listen to internal port 3900 (3900) ***
[Thr 1] *** HTTP port 8100 state LISTEN ***
[Thr 1] CUSTOMER KEY: >T1454016479<
[Thr 1] Wed Oct 22 14:28:49 2008
[Thr 1] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from gmsc2_DBM_00 [msxxserv_mt. 4669]
[Thr 1] Wed Oct 22 14:39:02 2008
[Thr 1] *** ERROR => MsSCheckConnections: no response from client C1 (127.0.0.1) after 300 secs received [msxxserv_mt. 3158]
[Thr 1] *** ERROR => MsSCheckConnections: disconnect now [127.0.0.1] [msxxserv_mt. 3162]
dev_disp:
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid DBM
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 19060
Wed Oct 22 14:28:11 2008
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 19060) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 111 successfully loaded
shared lib "dw_xtc.so" version 111 successfully loaded
shared lib "dw_stl.so" version 111 successfully loaded
shared lib "dw_gui.so" version 111 successfully loaded
shared lib "dw_mdm.so" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gmsc2_DBM_00 <
DpShMCreate: sizeof(wp_adm) 19344 (1488)
DpShMCreate: sizeof(tm_adm) 5710008 (28408)
DpShMCreate: sizeof(wp_ca_adm) 31200 (104)
DpShMCreate: sizeof(appc_ca_adm) 10400 (104)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2080)
DpShMCreate: sizeof(wall_adm) (40056/36728/88/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0xffffffff6e400000, size: 6404896)
DpShMCreate: allocated sys_adm at 0xffffffff6e400000
DpShMCreate: allocated wp_adm at 0xffffffff6e402218
DpShMCreate: allocated tm_adm_list at 0xffffffff6e406da8
DpShMCreate: allocated tm_adm at 0xffffffff6e406e08
DpShMCreate: allocated wp_ca_adm at 0xffffffff6e978ec0
DpShMCreate: allocated appc_ca_adm at 0xffffffff6e9808a0
DpShMCreate: allocated comm_adm at 0xffffffff6e983140
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0xffffffff6ea08e20
DpShMCreate: allocated gw_adm at 0xffffffff6ea08ea0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff6ea08ed0
DpShMCreate: allocated wall_adm at 0xffffffff6ea08ed8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)EsStdUnamFileMapInit: ES base = 0x0xfffffffe60000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
Wed Oct 22 14:28:13 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( gmsc2) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >gmsc2_DBM_00 <)
DpStartStopMsg: start msg sent
Wed Oct 22 14:28:14 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Wed Oct 22 14:28:21 2008
ERROR => W0 (pid 19071) died [dpxxdisp.c 14441]
ERROR => W2 (pid 19073) died [dpxxdisp.c 14441]
ERROR => W3 (pid 19074) died [dpxxdisp.c 14441]
ERROR => W4 (pid 19075) died [dpxxdisp.c 14441]
ERROR => W5 (pid 19076) died [dpxxdisp.c 14441]
ERROR => W7 (pid 19078) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbb
ERROR => W8 (pid 19079) died [dpxxdisp.c 14441]
ERROR => W1 (pid 19072) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbb --> 0xba
ERROR => W6 (pid 19077) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xba --> 0xb8
ERROR => W9 (pid 19080) died [dpxxdisp.c 14441]
ERROR => W10 (pid 19082) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 19085) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 19087) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=14
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 22 14:28:31 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Oct 22 08:58:31 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 19071 Ended no 1 0 0
1 DIA 19072 Ended no 1 0 0
2 DIA 19073 Ended no 1 0 0
3 DIA 19074 Ended no 1 0 0
4 DIA 19075 Ended no 1 0 0
5 DIA 19076 Ended no 1 0 0
6 UPD 19077 Ended no 1 0 0
7 ENQ 19078 Ended no 1 0 0
8 BTC 19079 Ended no 1 0 0
9 BTC 19080 Ended no 1 0 0
10 BTC 19082 Ended no 1 0 0
11 SPO 19085 Ended no 1 0 0
12 UP2 19087 Ended no 1 0 0
Dispatcher Queue Statistics Wed Oct 22 08:58:31 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
2
2
2000
4
2
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
this is only a part of dev_disp file.
dev_w0:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid DBM
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 19071
M
M
M Wed Oct 22 14:28:12 2008
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 19071) [thxxhead.c 1267]
M ThInit: running on host gmsc2
M calling db_connect ...
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DBM on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x106ab1350 0x106ab8e10 0x106ac95a8
C Attaching to DB Server DBM (con_hdl=0,svchp=0x106ac94d8,srvhp=0x106acb828)
C
C Wed Oct 22 14:28:13 2008
C Starting user session (con_hdl=0,svchp=0x106ac94d8,srvhp=0x106acb828,usrhp=0x106ab9628)
C Now '/@DBM' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x106ac94d8,usrhp=0x106ab9628)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DBM on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x106ab1350 0x106ab8e10 0x106ac95a8
C Starting user session (con_hdl=0,svchp=0x106ac94d8,srvhp=0x106acb828,usrhp=0x106ab9628)
C
C Wed Oct 22 14:28:14 2008
C Now 'SAPSR3/<pwd>@DBM' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance DBM is running on gmsc2 with ORACLE version 10.2.0.2.0 since OCT 21, 2008, 06:23:58
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081022 142812 gmsc2
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,
.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0xffffffff7397a000, size: 4400000)
M SHM_ROLL_AREA (addr: 0xfffffffe56000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0xfffffffe50000000, size: 67108864)
M SHM_ROLL_ADM (addr: 0xffffffff73db0000, size: 2672386)
M SHM_PAGING_ADM (addr: 0xffffffff77c00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe48004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff77e00000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)ES initialized.
B
B Wed Oct 22 14:28:15 2008
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
I
I Wed Oct 22 14:28:17 2008
I *** ERROR => shmget(10019,29999888,2016) (22: Invalid argument) [shmux.c 1556]
B dbtbxbuf: Shm Segment 19: Cannot attach
B ***LOG BBB=> ADM message TBX buffer: function shmcreate0 returns RC = 256 [dbtbxbuf#2 @ 16094] [dbtbxbuf1609 4]
B ***LOG BZL=> internal error in table buffer: table buf init fail [dbtbxbuf#2 @ 1701] [dbtbxbuf1701 ]
B dbtbxbuf: return code (sap_rc): 2, Buffer TBX_GENERIC will not be available
B db_tblinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 260]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 2067]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1509]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10283]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 19071) [dpuxtool.c 260]
Quick help would be appreciated since installation it held up.
Regards,
Santosh BhatHi,
I am finding following error in your log:
MsSClientHandle: no server provides service ENQ (4), requested from gmsc2_DBM_00 http://msxxserv_mt. 4669
UPD 0 0 2000 0 0
--------++++--
+
ENQ 0 0 2000 0 0
--------++++--
+
BTC 0 0 2000 0 0
--------++++--
+
SPO 0 0 2000 0 0
--------++++--
+
UP2 0 0 2000 0 0
Please assign no. of work processes to at least 1 for above mentioned type of work process. -
Java connector calls against sap system with logon groups
hi there.
i want to use java connector to connect to a sap system and run a function. my problem: the sap system has more than one instance and i do not want to connect against the central instance. i want to use a logon group. does anyone have an idea how to handle this?
thanks,
martinhi,
check this
http://help.sap.com/saphelp_nw04/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
http://nwadave.com/NwadExplorer/data/SAPDoc/architecture/SAP-Client_LogonAndCommunication.doc
let me know u need any further info
bvr -
Using ale u can send from sap to sap and sap to non sap systems
hi,
using ale u can send from sap to sap and sap to non sap systems,
then what is diff b/w ALE and EDIHello KALYAN KUMAR,
Application Link Enabling (ALE)
1.You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems.
2.ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
3.ALE enables the integration of business processes across several SAP or non-SAP systems.
Electronic Data Interchange (EDI)
1.You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor).
2. The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12).
3. This enables communication with non-SAP systems.
By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message
I hope u understands the difference:) -
Problem with Send and Receive Emal In SAP System
Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PMHi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael -
Sales Order from one SAP to another SAP system thru ALE
I am trying to send a Sales order IDOC from one SAP system to another SAP system (basically from DEV to QAS). Will i be able to do this using ALE ? If so, how ? I don't want this Sales order to be posted as PO in QAS. I want it to stay as a sales order.
hi,
use BAPI SALESORDERCREATE
~linganna -
Setup of ALE Audit in SAP Receiver System
Hello,
for a scenario JDBC -> XI -> IDoc, I have to setup ALE Audit in the receiver SAP sytem.
I have followed the steps in the How-To-Guide (Handle acknowledgements for IDocs):
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
However I just want to have acknowledgements sent back to SAP XI for a specific type of IDoc (source coming from the database) and not all received IDocs as there are different sender systems sending IDocs (some of them via XI some of them directly).
Is there a way to configure ALE Audit in a way ALEAUDITs are sent just for specific sender systems / IDoc types. I want to avoid that the SAP XI system receives ALEAUDIT for all inbound IDocs.Hey,
This document describe how the handle audit the the sender and the receiver systems are SAP system, when one of the sides (sender/receiver) is not SAP system,
than the configuration become much more complex.
As of XI SP18, there are ways to control ALEAUD,
for more information, read:
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393634373435%7d
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc -
Inconsistencies data between ODS and RSA3 in SAP system (delta problem??)
Hi everyone,
I have a problem in my SAP BW production system. There is inconsistencies data between ODS (using tcode LISTCUBE) and Datasource in SAP system (tcode RSA3).
I'm using Datasource: 0FI_GL_10 and ODS: 0FIGL_O10.
In SAP system (using RSA3):
GL Account: 1202012091
Comp Code : 5400
Bus Area: 5401
Fiscal Year :2008
Period: 07
Accum Balance : $0
Credit Total: $350
Debit Total: $350
Sales : $0
And in ODS (using ListCube):
GL Account: 1202012091
Comp Code : 5400
Bus Area: 5401
Fiscal Year :2008
Period: 07
0BALANCE : $350 (it should be $0,shouldn't it? )
0CREDIT: $0 (it should be $350,shouldn't it? )
0DEBIT: $350
0SALES: $350 (it should be $0,shouldn't it?)
I have tried these :
1. Check if there is a start routine / routine or not in transfer or update rules....and...i get nothing
2. Check the data using tcode FBL3N..but the data is ok
And then i tried to trace the process chain and find error on delta infopackage which pull these data
Date
07.30.2008 : 231141 records --> error (ODS activation) --> request has deleted forever
07.31.2008 : 2848 records --> error (ODS activation) --> request has deleted forever
08.01.2008 : 135679 records --> error (ODS activation) --> request has deleted forever
08.02.2008 : 135679 records --> successfull repeat delta action
From 30 July until 1 August there is an error on delta infopackage because
fail to activate ODS (No SID found for value 'RIM' of characteristic 0UNIT). On 2 August someone delete the red requests and repeat the delta and success. Is there any possibilities that this problem arise because of this? If this the cause, how to bring back 2848 and 231141 records which has deleted?
Thank you and Regards,
-Satria-Hi everyone,
I have solved my problem. I executed my infopackage again (selection condition using GL Account which have wrong amount) with update mode 'Full update' and choose Scheduler > Repair Full Request and tick the checkbox.Thank you.
Regards,
-Satria- -
Problem in moving object from one SAP system to another....
Hi,
I have created a transport request in System A client 800.
I am trying to move the Transport request to System B client 900.
(Note: A and B are different SAP systems)
I first release the object going in system A client 800 using transaction se09.
Now I go to System B client 900 and then to transaction STMS. After this I click on display import queue for System A inside transaction STMS in System B. Then I go to EXTRAS ->Other Requests Add. The import queue name is defaulted by System A and then I add the Transport Request number. Then the system asks me to login in Sytem A client 800. I login successfully. But I get an error message:
"Transport control program tp ended with error code 0247
Errors: addtobuffer has problems with data- and/or cofile"
Can someone tell me how to solve this error ? What is the issue ?
Regards,
Rajesh.Hi Rajesh,
Check this link:
tp ended with error code 0247
http://www-1.ibm.com/support/docview.wss?rs=2366&context=SSZ8F3&dc=DB520&uid=swg21243429&loc=en_US&cs=UTF-8&lang=en&rss=ct2366tivoli
Solar_migration to different sid
http://www.sapfans.com/forums/viewtopic.php?p=790715&sid=3528f52126b6764d5cb28acb67f752fe
http://www.sapfans.com/forums/viewtopic.php?t=221340&view=next&sid=0e5e06508287d3f738bc97ce7aea8426
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/transport-request-to-import-queue-with-error-740676
Hope any of this link helps you out.
Regards,
Vivek -
Problem after deinstallation of JDK during SAP System running....
Hello...
I am working as a SAP BASIS trainee.I am facing some problem related with java and SAP System.
Actually an SAP System was already running on the my system and suddenly i required to work on eclips (an IDE for java). And to install eclips it required JDK 1.6 version.But as we know that for SAP System an JDK 1.4 version required only.
I forgot and deinstalled JDK 1.4 and Installed JDK 1.6. and again tryied to installed eclips bt it was still throwing an error that it required JDK 1.6 and currently JDK 1.4 is running.
On the other hand SAP System was getting problem during SAP START ( dialog queue waiting time elapsed .......). and finally not working.
I deinstalled JDK 1.6. now SAP System is working fine. It is getting started and everything is right.
Could i get any problem latter regarding to SAP Start??and why i cant use eclips on the same system??
Thanks in advance.
Uttam Kumar.> Could i get any problem latter regarding to SAP Start??and why i cant use eclips on the same system??
You need to make sure that the SAP system uses the correct JDK. You can install two JDKs in parallel (don't upgrade but install the 1.6 JDK in a separate directory).
Anyway, NWDI should not be installed on the server but on a local workstation.
Markus -
How we can import an IDOC structure from one SAP system to another w/o ALE
Hi Gurus,
How we can import an IDOC structure from one SAP system to another? we're not able to use ALE tech, these two sap systems are isolated.
Any response will be awarded!
Thanks a lot.
Samsonhi,
1.One is by change pointer concept i.e by executing the RBDMIDOC.We can generate the idoc and automatically to the inbound System.
2.By executable program also like bd10 and bd11.
Regards,
SHIVA(reward if helpful). -
How to add other SAP systems in CCMS ALE Monitoring
Hi all, how do I add other SAP systems to be ALE monitored centrally in the PI system?
I want to monitor the Idocs in the SAP R/3 system centrally in PI with CCMS. Default is only ALE for the PI system itself.You can add additional systems to CCMS quite easily.
I would recommend this to be done in Solution Manager though!
http://help.sap.com/saphelp_nw04s/helpdata/en/c8/40a442b024b211e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
Also, search Google for SAP CCMS Central monitoring. -
Hi,<br>
<br>
I am trying to install the SAP ERP 2004 and I need to log on to the SAP system to change the DDIC password.<br>
<br>
The problem is that I cannot log on to the system because the SAP instance is not started successfully. The disp+work.exe <br>process starts OK but after few minutes it stop.<br>
<br>
Please, give me a solution how to change the DDIC password.<br>
<br>
I am sending below the content of dev_w0 log<br>
<br>
Thank you,<br>
Vasil<br>
<br>
<br>
<br>
trc file: "dev_w0", trc level: 1, release: "640"<br>
*<br>
ACTIVE TRACE LEVEL 1<br>
ACTIVE TRACE COMPONENTS all, M<br>
*<br>
B <br>
B Wed Jul 29 10:17:34 2009<br>
B create_con (con_name=R/3)<br>
B Loading DB library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' ...<br>
B Library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' loaded<br>
B Version of 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43)<br>
B New connection 0 created<br>
M systemid 560 (PC with Windows NT)<br>
M relno 6400<br>
M patchlevel 0<br>
M patchno 43<br>
M intno 20020600<br>
M make: multithreaded, Unicode<br>
M pid 3676<br>
M <br>
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3676) [dpxxdisp.c 1160]<br>
I MtxInit: -2 0 0<br>
M DpSysAdmExtCreate: ABAP is active<br>
M DpSysAdmExtCreate: JAVA is not active<br>
M DpShMCreate: sizeof(wp_adm) 10528 (1316)<br>
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)<br>
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)<br>
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)<br>
M DpShMCreate: sizeof(comm_adm) 290000 (580)<br>
M DpShMCreate: sizeof(vmc_adm) 0 (372)<br>
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)<br>
M DpShMCreate: SHM_DP_ADM_KEY (addr: 060C0040, size: 3192688)<br>
M DpShMCreate: allocated sys_adm at 060C0040<br>
M DpShMCreate: allocated wp_adm at 060C1B58<br>
M DpShMCreate: allocated tm_adm_list at 060C4478<br>
M DpShMCreate: allocated tm_adm at 060C44A0<br>
M DpShMCreate: allocated wp_ca_adm at 0636B0E8<br>
M DpShMCreate: allocated appc_ca_adm at 06370EA8<br>
M DpShMCreate: allocated comm_adm_list at 06372DE8<br>
M DpShMCreate: allocated comm_adm at 06372E00<br>
M DpShMCreate: allocated vmc_adm_list at 063B9AD0<br>
M DpShMCreate: system runs without vmc_adm<br>
M DpShMCreate: allocated ca_info at 063B9AF8<br>
M DpShMCreate: allocated wall_adm at 063B9B00<br>
X EmInit: MmSetImplementation( 2 ).<br>
X <ES> client 0 initializing ....<br>
X Using implementation flat<br>
M <EsNT> Memory Reset disabled as NT default<br>
X ES initialized.<br>
M <br>
M Wed Jul 29 10:17:35 2009<br>
M calling db_connect ...<br>
C Thank You for using the SLOLEDB-interface<br>
C Using dynamic link library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll'<br>
C dbmssslib.dll patch info<br>
C patchlevel 0<br>
C patchno 43<br>
C patchcomment View with literal containing (0x60) (786638)<br>
C np:(local) connection used on UPAYWEB1<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
C Provider Release:9.00.1399.06<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
C <br>
C Wed Jul 29 10:17:36 2009<br>
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes<br>
C Using shared procedure name cache UPAYWEB1_UFTUFT_UFT_MEM initialized by another process.<br>
C Connected to db server : [UPAYWEB1] server_used : [np:(local)], dbname: UFT, dbuser: uft<br>
C pn_id:UPAYWEB1_UFTUFT_UFT<br>
C Not using MARS (on sql 8.0)<br>
B Connection 0 opened<br>
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost <br>
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090729 101735 UPAYWEB1 <br>
C The IRow interface is supported by this OLEDB provider<br>
M db_connect o.k.<br>
I <br>
I Wed Jul 29 10:17:40 2009<br>
I MtxInit: 0 0 0<br>
M SHM_PRES_BUF (addr: 0AD60040, size: 4400000)<br>
M SHM_ROLL_AREA (addr: 5EF60040, size: 160563200)<br>
M SHM_PAGING_AREA (addr: 0B1A0040, size: 72417280)<br>
M SHM_ROLL_ADM (addr: 0F6C0040, size: 1603610)<br>
M SHM_PAGING_ADM (addr: 0F850040, size: 525344)<br>
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F8E0040<br>
M ThCreateNoBuffer index size: 3000 elems<br>
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0F970040<br>
X EmInit: MmSetImplementation( 2 ).<br>
X <ES> client 0 initializing ....<br>
X Using implementation flat<br>
X ES initialized.<br>
C The IRow interface is supported by this OLEDB provider<br>
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
B dbtbxbuf: Buffer TABL (addr: 146900C8, size: 30000000, end: 1632C448)<br>
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1<br>
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5<br>
B dbtbxbuf: protect_shm = 0, force_checks = 0<br>
B dbtbxbuf: tsize_retry = 14304000<br>
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]<br>
B dbtbxbuf: Buffer TABLP (addr: 163300C8, size: 10240000, end: 16CF40C8)<br>
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1<br>
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5<br>
B dbtbxbuf: protect_shm = 0, force_checks = 0<br>
B dbtbxbuf: tsize_retry = 5047296<br>
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]<br>
B dbtbxbuf: Reading TBX statistics:<br>
B dbtbxbuf: 0 object entries precreated<br>
B Layout of EIBUF buffer shared memory:<br>
B 0: 1 * 4 = 4<br>
B 1: 1 * 344 = 344<br>
B 2: 8 * 20 = 160<br>
B 3: 4001 * 48 = 192048<br>
B 4: 2000 * 232 = 464000<br>
B 5: 4001 * 4 = 16004<br>
B 6: 1 * 200 = 200<br>
B 7: 65 * 4 = 260<br>
B 8: 13755 * 256 = 3521280<br>
B Tracing = 0, Shm Protection = 0, Force checks = 0<br>
B dbexpbuf: Buffer EIBUF (addr: 16D000D0, size: 4194304, end: 171000D0)<br>
B ***LOG BB0=> buffer EIBUF started with length 4096k bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]<br>
B Layout of ESM buffer shared memory:<br>
B 0: 1 * 4 = 4<br>
B 1: 1 * 344 = 344<br>
B 2: 8 * 20 = 160<br>
B 3: 4001 * 48 = 192048<br>
B 4: 2000 * 232 = 464000<br>
B 5: 4001 * 4 = 16004<br>
B 6: 1 * 200 = 200<br>
B 7: 65 * 4 = 260<br>
B 8: 13755 * 256 = 3521280<br>
B Tracing = 0, Shm Protection = 0, Force checks = 0<br>
B dbexpbuf: Buffer ESM (addr: 171100D0, size: 4194304, end: 175100D0)<br>
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]<br>
B Layout of CUA buffer shared memory:<br>
B 0: 1 * 4 = 4<br>
B 1: 1 * 344 = 344<br>
B 2: 8 * 20 = 160<br>
B 3: 3001 * 48 = 144048<br>
B 4: 1500 * 232 = 348000<br>
B 5: 3001 * 4 = 12004<br>
B 6: 1 * 200 = 200<br>
B 7: 193 * 4 = 772<br>
B 8: 5012 * 512 = 2566144<br>
B Tracing = 0, Shm Protection = 0, Force checks = 0<br>
B dbexpbuf: Buffer CUA (addr: 175200D0, size: 3072000, end: 1780E0D0)<br>
B ***LOG BB0=> buffer CUA started with length 3000k bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]<br>
B Layout of OTR buffer shared memory:<br>
B 0: 1 * 4 = 4<br>
B 1: 1 * 344 = 344<br>
B 2: 8 * 20 = 160<br>
B 3: 4001 * 48 = 192048<br>
B 4: 2000 * 232 = 464000<br>
B 5: 4001 * 4 = 16004<br>
B 6: 1 * 200 = 200<br>
B 7: 81 * 4 = 324<br>
B 8: 13754 * 256 = 3521024<br>
B Tracing = 0, Shm Protection = 0, Force checks = 0<br>
B dbexpbuf: Buffer OTR (addr: 178100D0, size: 4194304, end: 17C100D0)<br>
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]<br>
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#1 @ 2206] [dbcalbuf2206 ]<br>
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):<br>
B max_blocking_factor = 50, max_in_blocking_factor = 255,<br>
B min_blocking_factor = 5, min_in_blocking_factor = 10,<br>
B prefer_union_all = 1, prefer_union_for_select_all = 0,<br>
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,<br>
B convert AVG = 1, alias table FUPD = 0,<br>
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,<br>
B select * =0x00, character encoding = STD / []:X,<br>
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,<br>
B rule_fae->0, concat_fae->0, concat_fae_or->0<br>
B ***LOG BZY=> unexpected return code 000000064 calling db_cbufl [dbcalbuf#1 @ 4399] [dbcalbuf4399 ]<br>
B ***LOG BZY=> unexpected return code 17 calling init_shm_a [dbcalbuf#1 @ 1536] [dbcalbuf1536 ]<br>
B db_calinit failed<br>
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 252]<br>
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1901]<br>
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1359]<br>
M in_ThErrHandle: 1<br>
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9413]<br>
M <br>
M Info for wp 0<br>
M <br>
M stat = 4<br>
M reqtype = 1<br>
M act_reqtype = -1<br>
M rq_info = 0<br>
M tid = -1<br>
M mode = 255<br>
M len = -1<br>
M rq_id = 65535<br>
M rq_source = 255<br>
M last_tid = 0<br>
M last_mode = 0<br>
M int_checked_resource(RFC) = 0<br>
M ext_checked_resource(RFC) = 0<br>
M int_checked_resource(HTTP) = 0<br>
M ext_checked_resource(HTTP) = 0<br>
M report = > <<br>
M action = 0<br>
M tab_name = > <<br>
M <br>
M *****************************************************************************<br>
M *<br>
M * LOCATION SAP-Server upayweb1_UFT_01 on host upayweb1 (wp 0)<br>
M * ERROR tskh_init: ThIPCInit<br>
M *<br>
M * TIME Wed Jul 29 10:17:40 2009<br>
M * RELEASE 640<br>
M * COMPONENT Taskhandler<br>
M * VERSION 1<br>
M * RC 17<br>
M * MODULE thxxhead.c<br>
M * LINE 9589<br>
M * COUNTER 1<br>
M *<br>
M *****************************************************************************<br>
M <br>
M PfStatDisconnect: disconnect statistics<br>
M Entering TH_CALLHOOKS<br>
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP<br>
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]<br>
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]<br>
M Entering ThSetStatError<br>
M Entering ThReadDetachMode<br>
M call ThrShutDown (1)...<br>
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3676) [dpnttool.c 357]<br>Hi,<br>
<br>
The result from R3trans -d is:<br>
<br>
This is R3trans version 6.09 (release 640 - 26.10.04 - 15:45:42).<br>
unicode enabled version<br>
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."<br>
R3trans finished (0012).<br>
<br>
<br>
The content from trans.log is:<br>
<br>
4 ETW000 R3trans version 6.09 (release 640 - 26.10.04 - 15:45:42).<br>
4 ETW000 unicode enabled version<br>
4 ETW000 ===============================================<br>
4 ETW000 <br>
4 ETW000 date&time : 29.07.2009 - 12:45:58<br>
4 ETW000 control file: <no ctrlfile><br>
4 ETW000 R3trans was called as follows: R3trans -d<br>
4 ETW000 trace at level 2 opened for a given file pointer<br>
4 ETW000 [dev trc ,00000] Wed Jul 29 12:46:00 2009 3083 0.003083<br>
4 ETW000 [dev trc ,00000] db_con_init called 24 0.003107<br>
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 105 0.003212<br>
4 ETW000 [dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library<br>
4 ETW000 41 0.003253<br>
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."<br>
<br>
Thank you,<br>
Vasil<br> -
SAP/System did NOT prompt me for a transport request for ALE BD64 CDM View!
Hi Experts,
Am doing ALE setup for sending sales orders IDOC out to a 3rd party system.
I have created the logical system and attached to a transport. Here we dont have necessity of linking a client to this logical system!
Then, I created a Distribution Model (CDM) View in BD64 transaction and added Message types to it, but SAP/System did NOT prompt me for a transport request!! Pls. let me know
1) Is it usual with CDMs creation that NOT prompting for a transport? if so, How my CDM/changes will be moved to QA/Production?
2) If not, Why system did not prompted me for a transport?
3) Then How Can I attach my CDM/changes to a transport?
Thank youI don't think we get a TR prompt when adding a view in BD64.
You've to individually maintain the CDM view in QAS & PROD. Also there is a functionality to "distribute" the CDM view, are you looking for something similar ? -
Problem :" No changes allowed to SAP system objects" ,pls...
Hi guys, I recently installed the minisap system successfully but after I log on to the system every time I want to create a new program ( SE80 ), change and edit old program then the systems responds " No changes allowed to SAP system objects".
Have anyone had the same problem.
I would be very grateful if any one could help me.Pls..
Note:Mini SAP i get from Books ( ABAP Objects: Introduction to Programming SAP Applications
by Horst Keller, Sascha Kruger )
Regards
Indra Budiman
[email protected]Hi Indra,
On the face of it, it seems you're trying to change the standard SAP objects (programs). Could you specify which program you're trying to change / add ?
Remember, all your new programs should begin with either a 'Z' or 'Y'.
Regards,
Anand Mandalika.
Maybe you are looking for
-
Column headings in a file extract to excel
I am writing a program that will extract data and download it as a tab delimited file which will be input to excel. I need to put column headings on the file and I have attached an sample of the code that I am using. It is working fine but I am not s
-
Hi All, can we use the column alias name in expression in a select query? example, select (10+20) as col1, (col1+30) as col2 from dual; when i execute the above query, i am getting "col1 is invalid identifier". can please some one answer to my query
-
I have set up i cloud but my calendars wont sync between MacBook, Ipad and iPhone. Is there a refresh style option or does anyone know what to do to make sure the calendar on my MacBook is the one that the other devices reads. Thanks everyone.
-
Since last month, when I try to use iTunes to sync apps or settings with my iPhone, there is an error (message : AppleMobileDeviceHelper has encountered a problem and needs to close. We are sorry for the inconvenience) showing very frequently and it
-
Dear All, First i am Wishing you a Very happy New Year. Herewith i am attaching the VI. This VI is occupying my total system time while execution. I need to collect around 400 texts from the user and store it in the file for future use. I need in tab