Alert Mail configuration in Solution Manager 7.1 for Portal Runtime errors

Dear Friends,
We have EP7.01 SP5 installed on windows environment with Oracle DB. Also we have SAP EHP 1 for SAP Solution Manager 7.0.
Please help to provide steps to configure
proactive mail alert configuration ,
GRMG for High availability
Any portal runtime errors
for PORTAL services in Solution Manager.
Regards,
Venkat.

Hello Venkat,
You will have to include the Portal system in the Central System administration of your Solution Manager.
As the EP system will be monitored by a sapccmsr running with -j2ee option this one can be configured separately. The agent will be started using the monitoring segment of the J2EE instance and therefore can be started more than once.
Here you should also use the latest sapccmsr agents.
The following link provides details on the required agents:
http://help.sap.com/saphelp_nw2004s/helpdata/en/ca/118110ff542640b7c86b570cc61ae3/frameset.htm
Please refer the below notes.
214247 RZ20: Questions on configuration of monitoring data
704349 Activating the CCMS monitoring for TREX 6.1 (NW2004
Note the EP system can only be monitored by using the SAPCCMSR agents. and then by implement a central autoreaction method you can generate e-mails from CCMS.
Automatic emails will get generated when certain thresholds are met. You must configure the thresholds from the central monitoring system for the nodes that you want email to be generated.
Please follow the steps in the note to configure central auto reaction.
429265 CCMS monitor architecture: Central auto-reaction
In the central monitoring system ( Solution Manager in your case ), Goto RZ20, choose the monitor for the nodes that you are monitoring. Select the node, click properties, & check the threshold values.
Also refer to the following notes:
547024 - Transfer the EP 5.0 Monitoring-Data to SAP CCMS
644783 -P 6.0 Monitoring via CCMS / SolMan
Also, check the following link that has information on portal monitoring :
http://service.sap.com/~sapidb/011000358700002004322004E
I guess this is a whole lot of information to assimilate and will be helpful to you to setup what you intend to.
Regards
Amit

Similar Messages

Solution Monitoring configuration with solution manager 4.0

Hi Friends,
I have to the Solution Monitoring configuration with solution manager 4.0.
Please provide steps or screen shot if any body having that.

Hi,
Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
This will solve your problem.
Feel free to revert back.
--Ragu
Message was edited by:
Raguraman C

How to Configure Solution Manager 3.2 for Support Desk

Please give me information for configure solution manager 3.2 for support desk. What r the steps to configure ?.
satinder lamba

Hi,
Check these
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
/people/kamran.ellahi2/blog/2006/01/13/setting-up-sap-service-desk-123-and-go
https://websmp201.sap-ag.de/~sapidb/011000358700001197002005E/Addtional_Information.pdf
This will allow you to succeed in configuring your Service Desk.
Feel free to revert back.
--Ragu

EWA Configuration in Solution Manager 7.1 in SP08

Hi All,
Could any one please advice on the Changes that has been taken place for EWA configuration in Solution Manager 7.1.
Warm Regards,
Sudhakar G

Hi
In addition to above also check below wiki link
How to create an Ad Hoc EWA report in Solution Manager 7.1 - Solution Manager - SCN Wiki
and below as well
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
I assume you have done post setup etc
Regards
Prakhar

AS Java (Config Wizard Configuration to Solution Manager)

Hello.
While I try to configure "NW:Solution Manager-AS Java(Config Wizard configuration to Solution Manager)" in NWA I receive the following error:
Error: Name or password is incorrect (repeat logon)
Step: J2EE User: SOLMAN with SID and Client extension
Why the program uses the user "CTC_NULL" (in the attached log) to login to the destination?
I never created such user.
I am grateful for every tip.
Log:
J2EE User: SOLMAN with SID and Client extension
Description
No specified detailed description
State
START_ACTION_ERROR
Result
A user with the name SM2CTCSMR001 exists in the System
Checking the step
Please go to the J2EE Engine Useradministration using an user with administrator role (e.g. Administrator)
Take care that 'user' is selected in the combo box and enter the user name SM2CTCSMR001 into the input field, then press the 'Start' button
If the user exists, he will be shown in the table, if you select the entry you can see details about him
Executing the step manually
Please go to the J2EE Engine Useradministration using an user with administrator role (e.g. Administrator)
Press the 'Create User' button
The create user dialog appears
Please execute following steps in the 'General Info' Tab to create the user:
In the input field Logon-Id enter the name SM2CTCSMR001
In the combo box 'Security Policy' select the entry 'System User (Internal RFC and Background Processing)'
Please enter a password and confirmation for the user
Press the save button to save the user
Support Information
Type of Action
InvokeServiceDebug Events
error message
Error: Name or password is incorrect (repeat logon)
InvokeService:J2EE User: SOLMAN with SID and Client extension
Library: sap.com/tclmconfig~content
SourcePath ./com_sap_sm_ctc_scenario_simulate/com_sap_sm_ctc_scenario_ui_process/ext_1206447991146/proc_1197052628227/proc_1207325025157/proc_1207755933502/maintainUser
Time 2012/02/29 at 08:46:42
WSDL content/common/service/usermanagement/maintainUser.wsdl
Destination parameters
user : CTC_NULL
password : % secure content %
host : host1
sysnr : 00
client : 000
language : EN
Execute Java Service
Library: sap.com/tclmctcutilcore_ear
Class: com.sap.ctc.util.core.services.UserFacade
Method: void com.sap.ctc.util.core.services.UserFacade.maintainUser(java.lang.String, java.lang.String, java.lang.String)
Arguments (3)
userName : SM2CTCSMR001
password : % secure content %
userType : password1
InvokeService- Result: ERROR
Refresh Env. Messages: false
Duration: 0.141 sec
Exception Class: com.sap.mw.jco.JCO$Exception
Exception Message: Name or password is incorrect (repeat logon)

Hi,
As far as we could see, you're facing an authorization issue. To solve
that...
Can you check that the user executing the task (SOLMAN, i suppose) is
assigned the authorization - you can run an authorization trace using
transaction ST01 (check only the authorization box) and reproduce the
issue. The resulting trace should show which authorization failed. Once
this is established the necessary authority can be assigned to the user.
Thanks,
Regards
Vikram

Solution Manager Data Extraction for BW

Hi,
We have a Solution Manager in place for SAP Systems. Our requirement is to extract data from Solution Manager into BW and provide BW Reports for Solution Manager Reporting & analysis.
What are the standard DataSources/Extractors available in solution manager for this?
What are the Business Contents (Infosources) available in BW?
Any help will be rewarded.
Regards
Prasad

Hi Prasad,
have you already found the related IMG tree? It guides you through the setup.
Transaction SPRO -> SAP Reference IMG -> SAP Solution Manager -> Scenario-Specific Settings -> Operations -> BI Reporting
transaction: RSA5 (Installation of DataSource)
- 0SM_SMG_ROOT                   Oberster Knoten Solution Manage
-- 0SM_SMG                        Solution Manager
--- 0SM_DSWPBI_DB390
--- 0SM_DSWPBI_DB400                  DB400 Data
--- 0SM_DSWPBI_DBADA                  Adabas Data
--- 0SM_DSWPBI_DBDB2                  DB2 Data
--- 0SM_DSWPBI_DBINF                  Informix Data
--- 0SM_DSWPBI_DBMSS                  SQL Server Data
--- 0SM_DSWPBI_DBORA                  Oracle Data
--- 0SM_DSWPBI_MODUL                  Module Data
--- 0SM_DSWPBI_PERF                   Performance Data
--- 0SM_DSWPBI_SERVER                 Server Data
--- 0SM_DSWPBI_SYSDATA                System Details Data
--- 0SM_DSWPBI_SYSTEM                 System Data
Best regards,
Ruediger Stoecker

How to integrate Solution Manager system to Enterprise Portal

Hi all,
HOW TO INTEGRATE SOLUTION MANAGER SYSTEM TO ENTERPRISE PORTAL SYSTEM

Hi,
First establish SSO between portal and solution manager.
make the iview from com.sap.portal.epsolman.EPSolman
check the link for help
ep and solution manager support desk
Thanks
Santosh

SUPM 2. 0 - Automated script management - Portal runtime error

Hi,
Whenever I click on "Automated Script Management" I receive this message:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 11:14_15/06/11_0008_11133350
Refer to the log file for details about this exception.
When I look at the log history, I see 1 error: "No hierarchy maintained for object type".
What do I have to do to resolve the issue?
Thanks,
François

Hi..
Since you are getting an error of Hierarchy, you have to follow the following steps:
1. After specifying the Hierarchy name in SPRO, Login to SuPM and go to "Settings" tab and select the tab "Default Hierarchy"
2. Here, you have to select the Hierarchy which you want it to be used by SuPM application
3. Then, you have to go to "Application Properties" and select "Data Source Administration"
4. You have to Refresh All the Data Sources to reflect the changes.
Now, Try using the application, it will not throw you any error.
Hope it helps,
Regards,
Raghunandan GV

Trigger alert on yellow in Solution Manager

Can somebody tell me how I can trigger an alert on yellow in business process monitoring in solution manager?
Useful answers will be rewarded.
Alessia

Hello Venkat,
You will have to include the Portal system in the Central System administration of your Solution Manager.
As the EP system will be monitored by a sapccmsr running with -j2ee option this one can be configured separately. The agent will be started using the monitoring segment of the J2EE instance and therefore can be started more than once.
Here you should also use the latest sapccmsr agents.
The following link provides details on the required agents:
http://help.sap.com/saphelp_nw2004s/helpdata/en/ca/118110ff542640b7c86b570cc61ae3/frameset.htm
Please refer the below notes.
214247 RZ20: Questions on configuration of monitoring data
704349 Activating the CCMS monitoring for TREX 6.1 (NW2004
Note the EP system can only be monitored by using the SAPCCMSR agents. and then by implement a central autoreaction method you can generate e-mails from CCMS.
Automatic emails will get generated when certain thresholds are met. You must configure the thresholds from the central monitoring system for the nodes that you want email to be generated.
Please follow the steps in the note to configure central auto reaction.
429265 CCMS monitor architecture: Central auto-reaction
In the central monitoring system ( Solution Manager in your case ), Goto RZ20, choose the monitor for the nodes that you are monitoring. Select the node, click properties, & check the threshold values.
Also refer to the following notes:
547024 - Transfer the EP 5.0 Monitoring-Data to SAP CCMS
644783 -P 6.0 Monitoring via CCMS / SolMan
Also, check the following link that has information on portal monitoring :
http://service.sap.com/~sapidb/011000358700002004322004E
I guess this is a whole lot of information to assimilate and will be helpful to you to setup what you intend to.
Regards
Amit

I want all ccms alerts come into my solution manager

Hello,
I want to monitor all the ccms alerts in all the systems from my solution manager.
We are using solmon (4.0) SP 14.
We are using ECC6, all systems in the landscape should configure to solmon
Like if any backgroind job fails it should come to somon alert inbox,if it coming near to any threshold i should get a alert in solmon alert in box,what ever it shows yellow or red ccms it should come to solmon
please help me in doing this
Regards
Mahesh

Mahesh,
That is possible with solution manager. You need to define system landscape and setup the system monitoring, central system administration.
Please check transactions codes SMSY, DSWP and SDCCN.
http://help.sap.com/saphelp_nw04/helpdata/en/02/5ec13690581b20e10000009b38f839/frameset.htm
http://service.sap.com/rkt-solman
Hope this helps.
Manoj Chintawar
Edited by: Manoj Chintawar on Mar 17, 2009 8:29 AM

Prblem Service Desk configuration in Solution Manager 4.0

Hi All,
Here I have done the configuration of Service Desk in Solution Manager 4.0 by using the document which I have for release 3.2. However I have face some problem in Step Initially create and Assign the Satellite Systems as iBase C and Manually create and Assign the Satellite Systems as iBase Co .So I exclude above mention step. But still I am able to create the support message from Satellite Systems.
So can please let me know whether it will work fine in upcoming time or Do I need to test my Service Desk configuration for same.
Moreover please let me know how to test Service Desk configuration for real time environment.
Following are the step and problem which I face while doing the Service desk configuration.
STEP 1 #Initially Create and Assign the Satellite Systems as iBase C
To be able to use the Service Desk and Change Request scenarios in SAP Solution Manager, you need to define the Installed Base (iBase). An iBase component has to be created for each satellite system from which Service Desk messages will be sent to the SAP Solution Manager system.
The iBase components for the iBase structure SOL_MAN_DATA_REP (installation 1) can be created and assigned either automatically or manually. Note that these components and the assignments can only be created once automatically for every solution. To refresh your existing iBase data execute IMG activity Manually Create and Assign the Satellite Systems as iBase Components.
Requirements:-
You have defined your system landscape in the Solution Manager System Landscapes(transaction SMSY).
Activities:-
1. In transaction SOLUTION_MANAGER, open a solution.
2. Choose Operations -> Service Desk.
3. Choose Edit -> Initial Data Transfer for iBase.
The data is copied automatically. The iBase systems for the solution are automatically assigned to SOL_MAN_DATA_REP (installation "1"). An iBase component is created for each system installation number (which can be displayed by choosing System -> Status).
For each solution repeat these steps.
Problem in STEP1 :- I am not able to check the System  Status.
STEP 2 #Manually Create and Assign the Satellite Systems as iBase Co
In this IMG activity, you define the Installed Base (iBase) manually, i.e. for refreshing existing iBases after solutions have been changed.
An iBase component has to be created for each satellite system from which Service Desk messages will be sent to the SAP Solution Manager system.
Activities:-
1. In transaction Change Installed Base (IB52), use the input help (F4) to find the Installed Base with external ID SOL_MAN_DATA_REP.
2. Continue as follows:
 If SOL_MAN_DATA_REP does not exist:
a) Call transaction Create Installed Base (IB51).
b) Choose iBase Category 01 (Installed Base).
c) Choose Enter.
d) Specify the iBase header data in the iBase section.
e) Specify the external ID SOL_MAN_DATA_REP and enter a short description.
 If SOL_MAN_DATA_REP exists:
a) Choose iBase No. 1 (SOL_MAN_DATA_REP).
b) Choose the SAP WEB AS component.
3. To assign the systems as iBase components, go to the Text item tab.
Three components are included in the standard package.
4. Add all the satellite systems as text items to the table:
o Column Short text: Description of the system
o Column Identification: System ID, space, installation number
5. Save.
After changes have been made to a solution, repeat these steps to update system landscape data for iBase.
Note:-
Every system is only listed once in the iBases. That means a system is not listed in an iBase if it has been listed in another iBase before.
Problem in STEP2:- Here I am not able to find Text item tab as per point 3 .
STEP 3 # Assign Business Partners to iBase Components
You need to assign business partners to the new iBase components.
Activities:-
1. In transaction Change iBase (IB52), choose Goto -> Partner
2. Assign business partners with the following functions to the new iBase component systems:
o Administrator
o Key User
o Sold-to Party
3. Save.
4. Repeat these steps for each iBase component.
Problem in step3 :- In IB52 t-code screen there no any menu path like goto  partner
Thanks a lot,
Harshal

Hi Harshall,
You have to enter the value as 1 in Installed base field and then press enter.
You will be taken inside and then you will be able to see the Goto - Partner screen.
Hope this will help.
Please reward points suitably.
Regards,
Naresh.

Problem in Application Help Configuration in Solution Manager

Hi Experts,
Here I facing one problem during Application Help configuration..
When I am going through application help for Solman Configuration it's taking me to standard erp help..
Where as in SR13, under PlainHtmlHttp,
In path tab I had given saphelp_sm40/helpdata for solution manager document.
But for other standard t-code it's giving actual application help.
where for SMSY,SOLAR01 etc i am not getting the application help.
Looking for advices.
Thanks & Regards,
Sumanta Chatterjee

Dear Sumanta,
This depends on how you want to (or how you can) use this http://help.
sap.com site.
At first you must be aware of the different areas on this site, these
areas have different URL structures, for example:
- http://help.sap.com/saphelp_erp2004 <<< for mySAP ERP
- http://help.sap.com/saphelp_47x200 <<< for R3 Enterprise
- http://help.sap.com/saphelp_nw04 <<< for SAP NetWeaver 04
- http://help.sap.com/saphelp_sm32 <<< for SAP Solution Manager 3.2
The main problem is that in the area "http://help.sap.com/saphelp_sm32"
there is only online documentation for the Solution Manager
functionality.
Can you please check the table SBAON_CCHK with transaction SE16.
The following record must exist:
MANDT COMPONENT NAME_EN
xxx ST Solar Help
If this record does not exist, please create this record manually.
This should help resolve the issue.
Regards
Amit

Alert mail configuration for backup / Oracle database

Hello All,
I am trying to configure alert mail for successful backup in the system and i have did with most of the configurations. The steps are as follows:
Configured mail in 000 client and also assigned mail id for a user
Configured the method CCMS_OnAlert_Email_V2 (set the parameters and its auto reaction method)
Configured the nodes CCMS Monitor templates -> Database -> Oracle -> Backup / restore -> backup status -> last brbackup run and last successful complete backup with the method CCMS_OnAlert_Email_V2 as mentioned in the SAP note 176492
And after these configurations we receive the mail successfuly. However there are few issues which i would like to get corrected / clarified. Whenever a backup is started i am receiving a mail stating that brbackup has been started and whenever a backup fails i am receving mail stating brbackup is failed with some return code. But i am not receiving any mail after successful completion of backup. Am i missing any configuraions here? Is this the standard one and other configurations required for mail on successful backup? Please suggest
Regards,
Anandh

When should a message trigger an alert?
1.Always (at every message): The Alert Monitor triggers a alert with the corresponding message value for every message.
2.Message value (color) has changed: The Alert Monitor only triggers an alert if the alert color of a reported message changes. For example, an alert is triggered if a red message follows a yellow message.
3.The message sent has changed: The Alert Monitor only triggers an alert if the color or severity of a message changes or if a new message is sent.
4.Never: The Alert Monitor does not trigger any alerts.
As your requirement, I would suggest it to be set to "Always"
Please let us know how it works.
Regards
Puneeth

System monitoring configuration in solution manager EHP1

Hi all
I am in a bit of fix
We have upgraded our solution manager devlopment to EHP1
Now I have added one system through SMSY in solution manager to configure system monitoring
I have generated all the RFC's,I have created the logical component and solution and assigned the system to the solution
When I check my solution it is looking fine
Now when I go within solution and click on the tab system monitoring
It shows me on the left hand side -> Set up system monitoring
when I click on Set up system monitoring on the left part of SAP screen,strangely it doesnt take me to the activation of screen monitoring,it just shows me the best practices documents on the right side but nothing more than that
I have checked many guides,blogs and SAP tutors anfd have followed them but strangely I am not been able to go to the screen for activating system monitoring
Are there any activities that need to be done after upgrading to EHP1?
Are there any services to be activated for system monitoring?
Please advice
Rohit

I'm not 100% sure that it is necessary, but it won't hurt.
Perhaps the essential adjustment you need for system monitoring is being done in there.
It won't hurt

Post-Installation and Configuration of Solution Manager 7.1

Dear community,
we are a SAP Channel Partner and want to offer SAP BO support; therefore I am about to set up the Solution Manager 7.1 on a Windows 2008 R2 host with Oracle Database 11g. The installation has been completed successfully and I have applied our permanent license, but performing the following post-installation steps some problems and questions have arised. Because I don't want to write a novel right here, let's begin with the first issue:
Updating the Solman, as suggested in post-installation.
I want to update my ISS to SP 04 and followed the common instructions using ESPIN and SPAM (see, for example, this thread: ).
That means, all packages have been loaded from ESPIN into SPAM. The problem is, that I have SPAM version 0039, but I get error message "you need at least version 0040" when I try to start the update queue. Also, I am not able to download a newer version of SPAM from SMP (702-0043 and 702-0045 are available there), because I need MOPZ for that (a message comes up telling me that items in my download basket have to be confirmed before I am allowed to download them), which will be available not before basic configuration during solman_setup later on.
So, what to do? Is there another way to get that 5MB SPAM update or do I have to go on with the old version?
Thanks in advance
Sönke
Edited by: Sönke Schnurr on Dec 29, 2011 4:15 PM (small addendum)

Okay, I am just re-installing my Solution Manager 7.1, because I couldn't solve my SPAM problem (linked thread in my next-to-last post).
I would like to configure the whole SAProuter SNC thing now. The Solution Manager host is the same which has the SAProuter installed. I have already registered and certified it and created the Windows Service which starts the SAProuter (saprouter -r -S 3299 -G routerlog -K u201Cp:CN=XXX, OU=YYY, OU=SAProuter, O=SAP, C=DEu201C), XXX and YYY being the appropriate values.
Now I want to create my saprouttable. A beta version is this one here, based on some tutorials in the internet:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 3200
1. deny all other connections
D * * *
Do you think it's alright? I'm connecting via host port 3299, so the first two lines should be alright, shouldn't they?.
The fourth line P ? The local IP address of my host? What is that line for at all?
Another question: The connection to OSS doesn't work yet, probably because of our local hardware router firewall. Which ports do I have to forward? I suppose it is just 3299?
An elaborate answer would be highly appreciated!
Regards
Sönke

Alert Mail configuration in Solution Manager 7.1 for Portal Runtime errors

Similar Messages

Maybe you are looking for