Alias to iView and portal menu dependency - urgent

Hello All
I've created iView for WDJ application, and given it alias, so it can be accesed via https://my.portal.com/irj/portal/MyAppAlias. It works ok, but I'd like to open this app with portal menus (those, which normally lead to this app) to be highlighted and open just like in case when user clicks it. Menu is simple, top tab is role, then upper menu from workset and iView gives left panel menu to clik.
Is it possible to access application directly keeping menus properly handled?
Best regards
Thanks in advance
Maciej Gottfried

Hi Maciej,
You can create an iView from this application ,put it in any structure you want inside a role.
Then configure this iView property "quicklink" to the alias you want, for instance "MyAppAlias".
Afterwards when you type in the url: https://my.portal.com/irj/portal/MyAppAlias you would be navigated and see the app in the content area and TLN and DTN panel showing the exact structure where this iView is located.
more details on quick links:
http://help.sap.com/saphelp_nw73/helpdata/en/49/3e2a1129002221e10000000a42189d/content.htm?frameset=/en/49/3d203a13301ec6e10000000a42189b/frameset.htm
Best Regards,
Tal

Similar Messages

Iview and Portal

Hello,
Does anyone knows about iview and Portal. Could somebody share with me some documents about the same.
Thanks
Jose

Also check out BW E-Learning links given below.
https://www.sdn.sap.com/irj/sdn/elearning?class=/eclasses/ebw201/main.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/18b32994-0701-0010-018b-8793877b07a2

Regd Integration of Domino.doc and Portal !! Urgent !!

Hi
I Want to know whether we can integrate Oracle 9i AS Portal with Domino.doc (which is used for document management).
I dont know much about Domino.doc .
Can anyone guide me whether the integration is possible or not and if so which documents should i refer to do the integration. i searched for domino.doc in oracle sites but i didnt encounter any useful document regd this.
Regds
Rajesh kanna.V

Hello Senthil,
yes, for the integration of the user interface of any Lotus Notes/Domino application you have the following options:
1: Rendering on Domino
- URL iViews to Domino Web App
- leveraging Enterprise Portal eventing for communication between the Domino iViews and other portal iViews
- leveraging Enterprise Portal styles for consistent look and feel
2: Rendering on Enterprise Portal
- using XSLT and ?ReadViewEntries to render NotesViews (flat and categorized)
- using XSLT and ?ReadEntries to render Outlines for Navigation. Also the assignment of such an iView to a pages dynamic navigation is possible. Navigation events are communicated through portal eventing
- using SOAP or web agents and DXL to render documents
SAP Consulting has alredy implemented all those options mentioned in customer projects. Please get back to me if you need more information or samples.
Regards
Michael

Entitlements and portal menu

Hi,
we created an Entitlement based in a role that compares a Session
Property Set's property value to "someValue".
We applied that Entitlement to a book within the portal desktop and
checked the View capability.
A Pageflow portlet in the header of the shell sets "someValue" or
"someOtherValue" in the Http Session according to the drop-down
selection submitted by the user.
We expected that when "someOtherValue" is submitted and set in the
Http Session the book should not appear in the portal menu.
But the book gets hidden only after the next interaction with the
portal (a click in some menu item, a refresh in the browser etc).
- What is the moment when the Portal engine applies Entitlements to
resources?
- How to refresh the entitled resources collection (books and pages)
after setting some value in the Http Session?
Thanks,
Eduardo.
Edited by: Eduardo Gouvea on Oct 2, 2008 10:16 AM

Hello Eduardo,
I am no expert in the portal lifecycle but I can see that the entitlements were evaluated and then the pageflow executed so it seems like a solution would be to send a redirect from your pageflow after you set the property that effects visitor entitlements: http://beehive.apache.org/docs/1.0.2/netui/apidocs/javadoc/org/apache/beehive/netui/pageflow/annotations/Jpf.Forward.html#redirect()
This use case is similar to logging in a user. After you authenticate a user you should always redirect back to the portal because who knows what is left over from evaluating entitlements before you authenticate them... the user could have been logged in as someone else prior to another login.

WebDynpro iViews and Portal Eventing

Hi All,
I am planning to prepare a proof of concept with following requirements.Can you please give me hints and resources to prepare this in 2 days?
1)Interaction between iViews using EP eventing.
2)Exploring how and what kind of data can be passed from one iView to the another (String , Java Objects etc)
3)Keeping track of various events of EP especially finding out if we can track when the user session is invalidated by the Portal so that we can free objects from memory.
4)The sample code should have 2 to 3 iViews interacting with each other and passing data.With detailed description of each steps from coding till deployment to the EP.
Thanks & Regards,

Hi Noaman,
You can use EPCM for eventing between iviews in portal. Also we can use the same for communication between Webdynpro and EP applications.
You can pass parameters using client data bag. The code for sender ....
var an='Hello';
EPCM.storeClientData("urn:namesapce","key",an);
EPCM.raiseEvent("urn:namesapce","eventname");
Code at the reciver....
function fn_selection()
var info=EPCM.loadClientData("urn:namesapce","key");
document.myform.name.value=info;
EPCM.subscribeEvent("urn:namesapce","eventname",fn_selection);
This is the javascript code for triggering and subscribing events in between iviews.
Hope this Helps
gEorgE

J2EE_Admin Unable to Add iView Permissions (Connecting BEx and Portal)

Hi guys,
I'm trying to set up a connection between BEx Web and Portal in a Netweaver 2004s environment.
Following notes 917950, I have made the configuration using Template Installer and RSPOR_SETUP.
Perhaps unsurprisingly, there are some issues.
Diagnostics & Support Desktop Tool (note 937697) shows 6 red lights:
1. BI iView Permissions
2. BI Mastersystem
3. BI Portal System Permissions
4. URLs Prefixes Customized on Both J2EE and ABAP Side
5. User Mapping of User DDIC
6. WebAS ABAP Certificate and Login Modules Configuration
Here, let's just look at
1. BI iView permissions.
Error: 
The BI Report-Report Interface iView does not have the necessary permissions for being called directly.
My question is
Why can't the J2EE_Admin user do the following fix (Note 983683)?
1) In the portal, follow the path
"Content Administration -> Portal Content"
"Portal Content -> Content Provided by SAP -> Platform Add Ons ->
"Business Intelligence -> iViews -> BEx Launcher (transactions for RRI)"
(pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.rritransaction).
2) From the context menu for this entry, choose "Open" -> "Permissions".
3) "Search" for the "User Group" (Caution: not the "role") "Everyone" and add this to the list of assigned authorizations.
Set the value "None" in the selection field of the "Administrator" column and set the indicator "User". Save your changes.
The "ADD" button is not clickable!! Is it because the J2EE_ADMIN user is not authorized to add permissions?
I hope the experts here can provide some light into the situation. Points will be awarded for helpful answers. Thank you!!
Regards,
SJ

2. BI Mastersystem
it depends on the type of error, see the hint given by the disgnostics tool, if it is sothing to do with BW system alias, so you have to connect to your portal and in system configuration->systemlandscape-> right click on SAP_BW then choose system alias and add the one proposed earlier in the diagnostics tool
3. BI Portal System Permissions
add group everyone on you SAP_BW system on systemlandscape
4. URLs Prefixes Customized on Both J2EE and ABAP Side
the one declared in the portal should be the same as the one in RSPOR_T_PORTAL table. you can modify this table to include the domain name of your URL
5. User Mapping of User DDIC
open your java admin consol (http://server....:5sid00 and then click on user administration, choose ddic the in the mapping tabulation click on modify the enter j2ee_admin as a user for the mapping, it should solve this point, don't forget to save.
6. WebAS ABAP Certificate and Login Modules Configuration
for this one you have to give the error text so i can help.
if it helps give points.
Regards.
Lakhdar Mourad

MDM Custom Iview and Standard Iview Portal Eventing

Hi
I'm trying to develop a custom iview which updates a Standard MDM Result Set iview:
I found this documentation:
http://help.sap.com/saphelp_mdm550/helpdata/en/45/c87cfd43e56f75e10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/12195312-0e01-0010-a392-debbd32e39d4
So i created an iview which raises this event
WDPortalEventing.fire("urn:com.sap.pct.mdm.appl.masteriviews","updateSearch","ID=115551&RefreshSearch=True");
Then i upladed my code in the portal, created a new iview and put it in the same page with a Result Set iview. During testing when i rise the event form the custom iview, the standard Result Set catch this event but instead of update it gives the following error:
Error occurred: Error performing search. com.sap.mdm.internal.protocol.manual.ServerException: Illegal value for parameter, com.sap.mdm.internal.protocol.manual.ServerException: Illegal value for parameter (see log for details)
In SDN there is a thread with the same problem (Search Standard iView + Search Custom iView) which is not solved.
Can somebody help me ?

sorry, I have same task and tried same code for my alias, table and field.
     WDPortalEventing.fire("urn:com.sap.pct.mdm.appl.masteriviews",
               "updateSearch",
               "MDMSystemAlias=NSI_PRODUCTION_ALIAS&MDMTableName=Assets&R3Code=411000000000000006&RefreshSearch=True");
I fire event (for my alias, table and field)
but not any resultset or Current Search on page is catching this search.
please provide which options must be set made for views on page so that result set to be updated,
I hope this may help
does it need to add some custom event to result set?
thanks
Edited by: Ivan Ivanov on Aug 21, 2009 3:49 PM

SAP Portal Network - WebDynpro iView and SAP Application iView sharing

Hello All,
I've read about the restrictions in SAP Portal supporting the WSRP standard for application sharing. Mainly WebDynpro iViews and SAP application iViews sharing is not supported. That is in the case of a SAP Portal as producer and Non-SAPPortal as consumer.
I'm interested in a WebDynpro iViews and SAP application iViews sharing in a only-SAP Portals Network, where SAP Portals act as producer and consumer.
I've heard about the Remote Role Assignment and Remote Content Copy that are used in such case. I would like to ask if anyone knows if these can help overcome the restriction in sharing WebDynpro iViews and SAP application iViews that is present with WSRP? And if the advantage of WSPR, that is the application execution and rendering on the producer side, and as follows decreasing of bandwidth usage, is remaining in the case of the Remote Role Assignment and Remote Content Copy.
Thanks,
Mladen

Hi Manish,
for sharing content between SAP and non-SAP Portals, your case, refer to
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/23fb36cad10d23e10000000a1553f7/frameset.htm
All the possibilities and restrictions of WSPR in the case of SAP EP are explaind there.
For sharing content between only SAP Portals refer to my other thread:
Portal Network - Content Sharing
Hope it helps you!
Mladen

How to change the ESS objects, iViews and Pages, translation in the portal?

Hello everyone,
I'd like to change the standard SAP translation for iView and Pages in the Portal level. Does anybody knows how to do this?
My landscape is NW2004s and ESS for ECC 6.0
Regards
Luciano

you can change the standard SAP iViews and Pages using the Portal Content Translation feature of the Portal ( go to Content Administration->Portal Content Translation. Follow the instructions at
http://help.sap.com/saphelp_nw04/helpdata/en/25/08174082fe1961e10000000a155106/frameset.htm
all ESS iviews and pages have their content "ready for translation" and you can use the instructions above to translate that content.
Tiberiu
please award points if response was useful.

Implementation guide for ESS/MSS. Urgent for ECC6 and Portal 7.

HI ALL,
i need documents on Implementation guide for ESS/MSS. Urgent for ECC6 and Portal 7.
Thanks in advance.

Hi
Please go through the link in the below thread.
/message/3262434#3262434 [original link is broken]
Also try this ESS - 4.6C version to gain some knowledge:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAESS/ESSIAC.pdf
If this helps, pl do reward.
Thanks
Narasimha

Portal Eventing between Web DynPro Java iView and non-Web DynPro iView

Dear Experts,
I have 1 Web DynPro Java iView and 1 non-Web DynPro (using JSPDynPage and JSP) iView, both attached to a page. When Web DynPro Java iView fire a portal raise event, the portal iView did not execute the javascript function tied to the event subscribed.
Here is the code snippet which reside in the Web DynPro Java iView that is used to fire the event
String param = "test";
WPortalEventing.fire("urn:com.company.Test1", "TestEvent", param);
This the code snippet that is in the jsp page
function notifyTest(param)
     // Code to print param value here
EPCM.subscribeEvent("urn:com.company.Test1", "TestEvent", notifyTest);
Note:
1. When Web DynPro Java iView fire the portal event the entire page is refreshed, including the non-WDP iView.
2. When EPCM is replaced with window.top.EPCM, the page is refreshed, it is totally hanged with progress bar.
Can anyone help to solve this problem?

hi
Please write the below code snippet in ur jsp for notifyTestjavascriptfunction
function notifyTest( eventObj ) {
     eventParameter=eventObj.dataObject;
     // code to print the parameter "eventParameter"
Thanks
Harsimran

Transporting VC Models and related pages and iviews across portals

Hi,
Hope you all are doing good.
We have a particular requirement, which i hope you will be able to give some inputs.
We have models for which we have .gml files. In addition we have the models deployed in Portal as iviews under Visual Composer folder.
Our requirements is to transport the models in VC and iviews in Portal to a new installation.
When we take the content dump from portal for the models and import into new installation it works fine.
But when we want to make changes in VC model (.gml) files and redeploy the VC application in Portal, it does not over write the existing iview for same VC application in Portal.
The ID's of the deployed iviews for same VC appls are getting changed and hence not updating the same one.
Any idea what we are missing ?
Appreciate your help
Regards
Sumit

HI Sumit,
Whenever you import .gml file in new Portal firstly one model name should be created then only we can import the existing model from Dev box at that time the package name differ in such case.
this may be a precaution from SAP
I also tried the same thing what you did but getting the same kind of deployment what you are getting.
Hope your doubt are clear
Swapnil

Authschemes and portal / iviews - need help

I am aware that when I logon to the SAP portal, normally due to authschemes.xml configuration the default authscheme is used to authenticate the user (which uses the ticket auth template). I am interested to know if it is possible to configure the portal so that by entering a different url, I can use a new iview, and the iview will specify a non-default authscheme. This would allow me to logon using one method by entering the normal portal login URL and by another auth method by entering a different URL.
From what I understand about iviews (not much) I think this is possible, but I don't know for sure, and how to make it work. Can you help ?
Regards,
Tim

Patrick,
Sorry, but I am now very confused. I was under the impression that authschemes were configured in authschemes.xml and available for use in any J2EE authentication requirement, not just for portals. I have seen references before to using authschemes for non-portal login, and can see nothing which is portal specific.
My understanding of what you said before is :
1. user accesses portal
2. portal login page redirects to our servlet, which may ask the user some questions or give them options before deciding what type of authentication to use.
3. our servlet triggers the authentication via UME API
4. The auth stack is processed based on the authscheme name given in UME API, and CreateTicketLoginModule will be used to issue an SSO2 ticket for SSO purposes.
5. The servlet will then redirect back to the portal page and the SSO2 ticket in browser will allow the logon to complete.
Is the above what you were suggesting, or if not, can you help me understand where I am getting this confused/wrong ?
The part we are having problems with is step 3 where we are unable to pass the authscheme we want to use as a parameter.
Thanks,
Tim

Preview iView In Portal

Dear all:
when i previewed iView in the portal, i got some problems.
please give me some advices.Thanks~
1. Exception caught: com.sap.ip.bi.base.service.connection.ConnectionException: No connection exists for system "BP5"
com.sap.ip.bi.base.service.connection.ConnectionException: No connection exists for system "BP5"
at com.sap.ip.bi.base.portal.connection.PortalConnectionPool.getConnection(PortalConn... [see details]
2.Exception caught: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing
com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)... [see details]

Hi Aaron,
Check whether you have set all the following properties or not.
If not do this then you will be able to preview the iview in portal.
Connector - contains basic connectivty details
Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs,
Web Application Server - if you wish to access BSPs and/or Web Dynpro for ABAP and
User Management.
You also need at least one System Alias has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system.
Go through the below link which guides you in step-by-step creation.
https://wiki.sdn.sap.com/wiki/display/EP/HowtoConnecttoSAPR3SystemthroughEnterprisePortal7.0Usingan+iView.
Hope it helps you.
Regards,
Ponneswari.
Edited by: Ponneswari Adapa on Apr 15, 2010 6:15 AM

Creating SAP BW Report iview in Portal to access BW System

Hello Everybody ,
Iam creating an iview for publishin BW Reports in Enterprise Portal with the iview name SAP BW Report iview ,it asks for BEx Web Application Query String and Application Parameters and we are stuck over that.Do we need to create some standard templates for it and then connect them to reports .What should we enter under these parameters.Kindly revert back.
When we launch the SAPBWWebAppDesigner for template designing,an error message is displayed as mentioned below.Kindly please check that and the reason for its display.Do we need to make certain configurations for the Webapplication server for BW ,if any one has a document /guide available for that,kindly please revert back.
Error:
"You are logged on to an application server that does not support HTTP.Some of the Web Application Designer functions are therefore not available.Do you want to logon to a different application server?"
We are also not able to connect to the Web Application Server of BW directly by putting the url of the WAS into our browser.Are any extra configurations needed for that on the BW side for WEBAS.
You can send me attachents on my Email id which is [email protected] back soon,
Thanks,
Somya

Hello,
I was asking abt the following parameters to be entered in BW for Portal inorder to create RFC ,Rfc for BW in Portal is already created.
 Program ID
PortalDirectory
RFCDestination URL Prefix for Portal
Prefix of RM for BWMetadata
Export Path
Export File Name
Path in Portal
Name in Portal Content
System Alias
Logon Ticket Client
Portal SID
Import Path
Import File Name

Alias to iView and portal menu dependency - urgent

Similar Messages

Maybe you are looking for