AMD Athlon II X4 645 on Motherboard K9A2 CF

Hello,
AMD Athlon II X4 645 on Motherboard K9A2 CF will not work?

It's not in the CPU support list. If you have it try it else ask MSI. >> Contact MSI <<

Similar Messages

Overclock AMD Athlon II X2 250 on MSI 760GM-P21 (FX)

I want to overclock AMD Athlon II X2 250 on motherboard MSI 760GM-P21 (FX), integrated video card from motherboard and MS-TECH VERTIGO 520W 80+ power supply.
But before buy this power supply I had a NoName 400w.
And when I oc on NoName PSU after 3,3 ghz I receive BSOD.
How to oc more than 3,3 ?
Ty.

The CPU itself would work just fine up till the current draw exceeds the limit of CPU VRM (Voltage Regulator Module) and fry it. Even tho it's listed as supported don't use CPU over 95W and even then under heavy loads for longer periods of time a 95W CPU could possibly cause damage also. If using a 95W don't OC it any. The VRM on the 760GM was never intended for 125W CPU.
The only reason the 125W CPU is listed is because competing brands show support for them and MSI made the wrong decision to list them also just for competitive marketing purposes.

AMD Athlon 64 3800+ cpu upgrade to AMD Athlon 64 X2

Hello everyone,
First of all, I have been to cpu-upgrade.com and typed in my current (CPU)--> AMD Athlon 64 3800+ 2.40GHz (motherboard)--> ASUS A8M2N-LA (Naos) GL6.
According to the website, my AM2 Socket (940pin) is capable of upgrading to a Dual Core, Anyone know if that site is accurate or not? Any help would be nice. I need to get away from this single core.
1) Some CPU models require a BIOS upgrade, which a BIOS upgrade for this board is not available.
2) A lot of X2 Dual Cores work either using a 4400+, 4600+, and so on....
I do have a 550watt PSU installed, also I am using MSI Nvidia GeForce GT620 PCI-express 16x graphics, not using onboard.
I have read that some BIOS' upgrades terminate the onboard video, is that true? Basically, whatever I already have installed is current and up to date with all video/sound drivers, etc... If anybody very knowledgable knows for sure if an AMD Athlon 64 X2 will work in my system that would be nice. My specs below......
OS: Windows Vista Home Basic (32bit)
CPU: AMD Athlon 64 3800+ 2.40GHz
RAM: 2GB (GDDR2)
PSU: 550watt (all 20+4 for main cable to motherboard connected using all 24 pins + 4pin connector for CPU? I believe.
Sound: Realtek HD ALC888 High Definition Audio
Video: MSI Nvidia GeForce GT620 (GDDR3 with 2GB Video Memory).
Only thing I am bottle necking on is the CPU, and I would love to upgrade to Dual Core, once again, thank you for the help.

Hello @bigsnake,
I understand you are looking to upgrade your processor on your Compaq Presario Media Center SR2013WM Desktop PC. I am providing you with a link to a CPU-Upgrade thread concerning your very question ASUS A8M2N-LA CPU compatibility list. Now this is the only information I have been able to find concerning a processor upgrade for your Compaq Presario Media Center SR2013WM Desktop PC.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Cpu amd athlon II 450 x3

pls can someone help me
i hawe amd athlon II 450 x3 on motherboard NF520T-c35 and i dont hawe 3-rd core
the procesor is new
the old one vas 2core amd bios 1.0
i instaled bios 1.5 and i stil hawe 2 core on amd x3
also i try 1.7 bios and still nothing
why i dont hawe 3-core
pls help me

Quote from: srwle
omg i cant find how to post screeen shot here
>>Forum features & how to use<<
Quote from: srwle on 17-March-13, 16:36:40
mhtml:file://D:\firefox dawnloads\psr record\Problem_20130317_0932.mht!screenshot_0001.jpeg
thre is my cpu info
i yust bough it and instal in my pc
open thath link with explorer
, sorry but we can't open local files on your hdd. Just upload it to a pic hoster. Refer to the link above it's all described there.

Windows 8 64bit not compatible w/ AMD Athlon 64 processor and/or ASUS A8N-SLI motherboard.

Why should I have to go through a plethora of troubleshooting techniques, then have to settle for using the Windows 8/ 32bit install CD, when I have a 64bit system? I think it's probably something in the Windows
8 /64bit code that causes it to fail install w/ AMD Athlon 64bit processor, and/or my ASUS A8N-SLI motherboard. After a lot of hassle I tried the Windows 8 /32bit CD and that seems to work fine. My real question is, why should I have to settle
for 32bit on a 64bit system?

I had the same experience trying to install Window 8 Pro 64bit (Build 9200) on an old XP SP3 32bit system, but I somehow got it working; the full story.
I had two XP Sp3 32 bit systems I wanted to upgrade to Window 8 Pro 64 bit (with the $40 upgrade deal available now). System#1 is: I7 920/Asus P6T deluxe/EVGA 560Ti/3GB/1 TB SATA 300 drive/1.44 Floppy/ 12X Bluray burner (pulled the old TV tuner card for
upgrade-incompatible). I ran the Windows 8 upgrade advisor - very few issues (TV Tuner card as mentioned and other software) - bought the upgrade. Downloaded the upgrade from my Win7Pro 64bit system to obtain the 64bit ISO (2.69GB) - burned to DVD. Installed
from DVD; no problems, finished in under 20 minutes - working great (really fast boot!).
System#2 is: Opteron 180/Asus A8N-E/EVGA 275GTX/2GB/1 TB SATA 300 drive/ 1.44 Floppy/ 16X DVD RW burner; the Windows 8 upgrade advisor - more incompatible software than system#1, but no incompatible hardware. I had read a number of blogs concerning the issues
others were having with the upgrade failing, so before I purchased, I thought I would run the 64bit install DVD I had (known to work on the other system) to see if it worked. I should note this system was not-in-use and thus I was not worried if the install
failed (I'd just be annoyed!). Ran the install from the DVD; initial splash screen - no spinning dots - waited 15 minutes (by which time no activity on DVD or hard drive) - failure. Rebooted - entered bios (1010) - tried many combinations of settings up to
disabling nearly everything (NVRAID, Legacy USB, Floppy, Audio97- all disabled / moved SATA into every slot (1-4) / tried SATA 150 and SATA 300 (SATA2, slots 3-4) - no change - failure X4 attempts. Now original XP3 installation is corrupted (GRRRR!) - I should
have imaged the drive BEFORE - oh well. Read more about others experience with this seemingly NForce board-related issue. Plan B - I will try install with an IDE (PATA) hard drive (80GB) - failure. Read more - some mention Window 8 installer not "liking" XP
partitions / disks (???); Plan C - Re-partition / format / check 80 GB IDE drive with WDTools - attempted Win8Pro install - failure. Dejected; last attempt before considering Win8Pro 32bit - Plan D - Re-partition / format / check 1 TB SATA 300 drive with SeaTools
(Barracuda 32GB buffer-7200rpm) - run Win8PRO 64bit install from DVD (build 9200) - success! Install took nearly an hour, with 3 reboots to the finish. Specifics (install configuration): 1 TB SATA drive in Slot 4 (SATA2), upgraded memory to 4GB Corsair PC3200
(4 slots filled), Two DVD drives on Primary IDE channel (master and slave), secondary IDE channel - no devices, bios (1010) - NVRAID, Audio97,1394 port,LAN -disabled; USB 2.0, USB Legacy, Floppy - enabled, IDE-Auto), TrendNet USB wireless adapter on USB slot
2 (motherboard), EVGA 275GTX in PCIe slot 1, no other cards. System seems to be performing well (fast boot times, no hangs), but as noted, no sound (I actually forgot to re-enable the Audio97 device in bios; it was 2am). I will see if I can get the Audio97
enabled today; my backup is to add a Turtle Beach Montego DDL PCI card (with the Windows7 64bit driver and run in compatiblity mode). Hope this saga might help some others out - good luck.

Motherboard for AMD Athlon Mobile

Which msi motherboards work best with amd mobile cpus ? I have an AMD Athlon 1500+ left from my broken laptop and was wondering if i could use it.

k7n2 works but it over volts it alittle.
some people get the mobile for the k7n2 to be able to overclock REAL hard.
heard of people reaching 2.7ghz on air cooling with a mobile.
but that was with 2500+ mobile

AMD Athlon XP 2800 (Barton Core) will not post at FSB 166 MHz.

Per top of the board “stickys” I have read a great number of the post on this board and done my homework to provide as much technical info to help you help me. This should explain some of it’s lengthy nature.
Aside from Memory, HDD and Video card every thing else has been unplugged from board and power or stripped out of slots to isolate the problem.
Presently running BIOS: A6712 V. 1B
*As seen on face of MoBo: KT4V MS-6712 Ver:10A
*The Original Box bar code label: KT4V-L (601-6712-050)
K7, KT400. 5.1 chnl. S/W Audio, LAN, D-Bracket 2.
CPU: AMD Athlon AXDL 2800 DLV4D
Q334763K40034 AQYHA 0447APMW
Chip lable
Athlon XP (Barton) Low Power Processor (Model 10) 2083 MHz
OPGA Organic Pin Grid Array 1.50 Volt max. Temp. 85°C
512 KB L2 Cache 333 MHz System bus (166 MHz FSB) x 12.5
Memory: x3- PC 2700 512 mb DDR 333 Super Talent
And shows at post as running 333MHz. MemTested to 1,000% with first 1 stick, then all 3 sticks presently on bios A6712vms.1B0. at fsb 100MHz (aprox. 24hr.) I even installed and ran other AMD utillitys while MemTest was running to “stress” the system memory with zero errors. During this period I checked Windows Task Manager > Performance, CPU usage at 100%, PF usage 1.35gb. No Probs.
Video card: Removed: MSI AGP-8X Ti4200- VTD8X 128 MB DDR 533MHz
Replace with: PCI card (to rule out AGP card prob.) Gilmont, nVidia 64mb
(also tried Matrox AGP 32mb card with no different results then above cards)
Power Supply: L&C Model: LC-B350 ATX = 350 watt
      115/130v      B/4a      60/50 hz
      +3.3v/+5v   1+12v   -12/-5v    +5vsb
      28a   35a    16a    0.8a    0.3a   2a
   +3.3v combined load 200w
Cooler: Slim Volcano 10+, P/N A1671, rated for up to AMD Athlon CP 3400+ & fresh heat sink compound. Freshly re-seated.
All PCI slots empty as I attempt to run bare bones to eliminate problems. (except now running Vido card in 1 slot)
Floppy Drive: ribbon unplugged from board
HDD-0: Seagate 8 gb master, (HDD tested w/no errors)
O/S: Win. XP w/sp2
HDD-1: slave/ unplugged from ribbon and power
Sony CD-Rom: Unplugged from PCI slot and power
SATA/RAID-usb 2.0 card and other HDD’s, removed and not included till Sys. runs at full potential.
Exterior HDD and Burner beyond the scope here and not attached.
O/S Win. XP-sp2
BIOS I have tried: The original; Ver:10A, ran fine on Athlon XP 1600 (1400 MP) 3 years.
•   Then with MSI Live Update 3: Installed v. 1c which couldn’t run FSB 166MHz (MSI:” Fixes system reports incorrect message for AMD 3200+ CPU.
- Supports Sempron L2 512K 3000+ CPU.)
However, v. 1.c did not work and would not post at all with the newly installed Barton AMD-XP 2800. [frankly this attempt was months ago and I do not remember whether it would post at the slower 100 and 133 FSB speeds, and also to muddle my memory further I was upgrading an A7N8X-D with a Barton XP 3000 and having similar problems on the ASUS,,, which is now running fine at full potential. ; - p
•   Then I selected and flashed A6712 V 1.7 122602, boots and runs Win.XP-sp2 at FSB 100MHz & 133MHZ. (MSI:” Supports AMD Barton XP2800+ (FSB333) CPU
-Fixes system sometimes will have IDE CRC error -Fixes D-bracket2+USB keyboard, cannot use keyboard on DOS mode.)” which couldn’t run FSB 166MHz.
I checked with the Tech. at the local shop where I purchased the KT4V MoBo. He suggested I try a different BIOS but he didn’t specify which one. He is a personal friend and admits to some bad luck and dead boards due to flashing bios so reluctant to mess with it.
•   Now running: A6712vms.1B0 – MSI hid this BIOS V. found here:
•   http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=362&kind=1
•    On a different page than the 2 versions mentioned above. http://www.msicomputer.com/support/bios_result.asp
•    No wonder people are frustrated and confused about different MoBo versions there ID #’s and the BIOS versions them selves as seen on this news board. MSI’s fault, no fault of anyone here trying to help.
A6712vms.1B0
Runs fine at FSB 100 (shows as XP 1250+) and FSB 133 (shows as XP 2200+) Booting to Win. XP-sp2 on CMOS, default setup other than minor tweaks to accommodate MSI Ti 4200 AGP 8X 125mb graphics card or Gilmond PCI card. But which couldn’t run FSB 166MHz .
No post at FSB 166 mhz (once, it did flash a post screen stating AMD Athlon XP 2800 for about 2 sec. before going blank) Manual power down. Just now I rebooted with FSB 166, and again saw the AMD Athlon XP 2800 at top of the post screen as I hit pause break,,,, then the machine power crashed to Off. Once it even loaded Win.XP-sp2 but crashed to power off with in 2 min.
I must have booted this beast a dozen times or more after Clear CMOS jumper each time it went to blank screen with mach. still running. Start over; set Default settings and work up with FSB 100, 133, each time to read what POST says and see if it will boot to O/S.
Btw: I have looked for clear evidence through the not so specific descriptions MSI uses to separate these board model #s and may be part of my current problem with correct board ID = correct BIOS ID.
Found here:
[VIA] unofficial FAQ for KT4 series motherboards
https://forum-en.msi.com/index.php?topic=6090.0
Eg: - KT4 Ultra (MS-6590), 6-channel hardware audio codec
• KT4 Ultra (Pure Version)
• KT4 Ultra-B (Bluetooth ready)
• KT4 Ultra-BSR (Bluetooth ready + Serial ATA RAID)
• KT4 Ultra-FISR (Bluetooth ready, Serial ATA RAID, Gigabit LAN, IEEE 1394)
- KT4V (MS-6712), 6-channel software audio codec
• KT4V-L, with onboard 10/100 LAN
- KT4M (MS-6596) micro-ATX board
• KT4M-L, with onboard 10/100 LAN
- KT4A Ultra, (MS-6590) NEW!! based on KT400A chipset
• KT4A Ultra (Standard Version)
• KT4A Ultra-SR (Serial ATA RAID)
• KT4A Ultra-FISR (Serial ATA RAID, Gigabit LAN, IEEE 1394)
And a very similar version of this on Official MSI site. Both seem to try and make a difference between modles with on board Lan, and Blue Tooth ready.
Take a look at my original box sticker:
*As seen on face of MoBo: KT4V MS-6712 Ver:10A
*The Original Box bar code label: KT4V-L (601-6712-050)
K7, KT400. 5.1 chnl. S/W Audio, LAN, D-Bracket 2.
Yup, it says all this on the sticker and the in the manual and verified on the MoBo. So I can only guess at all parts of the puzzle as they gave them to me which lead me to the afore mention BIOS versions I ran, or am running. The sticker points to nearly half of the boards above except for the MS-6712 and the Ver:10a which is what I based my BIOS choices on. If someone knows differently and can lead me to official Nfo with a better answer I’m all ears.
Just saw this: Latest Official BIOS : KT4 MS-6590 (1.4), KT4V MS-6712 (1.8 ) , KT4M MS-6596 (1.1)>>Here: [VIA] unofficial FAQ for KT4 series motherboards
« on: 24 October 02, 05:14:04 » But these links and all but one link in this ‘sticky’ are broken .
So if (1.8) is the Latest Official BIOS for KT4V MS-6712 then what is this at the Official MSI SITE ?
KT4V
BIOS Type
AMI® BIOS     File Sizes
485KB
Version
1.C     Update date
Update Description   -Support Sempron L2 512K 3000+ CPU.
BIOS Type
AMI® BIOS     File Size
Version
1.B     Update date
2004-8-9
Update Description   Support Sempron 2200+/2300+/2400+/2500+/2600+/2800+ CPU.
BIOS Type
AMI® BIOS     File Sizes
485Kb Version
1.A     Update date
2004-5-13
Update Description   - System is unstable to run 3DMark03 with ATI 9600 PRO
- Add "PS/2 Keyboard Detection" Function.
- Support AMD 2400+ CPU.
BIOS Type
AMI® BIOS     File Sizes
514KB
Version
1.9     Update date
2003-7-29
Update Description   -Fixed Adaptec 2100S SCSI card cannot be used
-Modify CPU temperature detection
-Support boot from Onboard LAN
BIOS Type
AMI® BIOS     File Sizes
514KB
Version
1.8     Update date
2003-2-12
Update Description   -Support AMD Barton XP3000+ (FSB333) CPU
-Add "CPU Halt Command Detection" item in the BIOS Setup
Please also keep in mind I’m not trying to scuff anyone’s shoes…I just want to get what’s right for my board so that it and the CPU can live up to their full, "as advertised" potential and run with the other 3 big dogs under my desk.
This seems descriptive enough and rather lengthy. Just doing my homework and reporting my findings so I won’t include actual CMOS settings unless requested. I have notes on all settings I currently use to boot with this problem.
Other Dogs:
ASUS A7N8X-D running Athlon XP 3000 barton core 10 (runs fsb 400..whoknew?), Mem:2.5gb Super Talent
ASUS A7M266-D running Athlon XP 2800 (mp), Mem: 3gb Super Talent
Athlon XP 2800 (mp)
I don’t want to boar you with the details.
Yes, and the above have been upgraded w/new chips GFX cards and BIOS,,, NP.
Cut to sound track: Down on the BIOS again,,, wasn’t that Creedance Clear Water Revival?
Any suggestions or insights are much appreciated.

Welcome, and thank you for a thorough input! Hope I don't miss something you already said!
Quick version: Try setting processor voltage to 1,5 volt.
Long version:
Posting at wrong FSB can be put down to two things:
1 The processor isn't what you thought it is, but I think you eliminated that.
2 The system cannot run the processor at the correct speed. Mainly this has to with overheating, and/or that memory and processor cannot cooperate. This must be it, as you noticed the processor is correctly recognised.
You have little connected right? Then the best thing would be to pull power cable out. Take the motherboard and redo the seating of the processor, this is much better done with motherboard taken out.
At the same time, I suggest you clear CMOS. Should always be done when changing processor, and I've noticed on the Internet there are a few 1,5V XP2800 around.
http://64.233.183.104/search?q=cache:Q4eIa6OhudcJ:forums.amd.com/lofiversion/index.php/t47487.html+AXDL2800DLV4D+problem&hl=sv&gl=se&ct=clnk&cd=1

K9N Neo-F and AMD Athlon X2 AM2 6000+ (125W)

Hi Everyone!
I want to upgrade my PC, now I have:
MSI K9N Neo-F motherboard
S/N: 601-7260-010K0609058577
MS-7260 ver. 1.0 K9N Neo nForce 550, AMD AM2
CPU: AMD Athlon X2 AM2 3800+
RAM: GoodRam 2x512MB (667) and 2x1GB (667)
GPU: Zotac GF 8800GT
Now I want to buy:
CPU: AMD Athlon X2 AM2 6000+ (125W)
RAM: GeIL 2x2GB (800) Black Dragon II
My question is: can I use this new CPU on old motherboard?
Have anyone similiar configuration?
In this topic: https://forum-en.msi.com/index.php?topic=108896.0 someone has the same motherboard and CPU, but talking abolut PSU...
Waiting for help :-)

Quote from: Arcur on 04-June-08, 03:59:54
I was looking for a 125watt board too and its really hard to find one from MSI that have the things I want, I cant even find a board with Nvidia chipset, amd2+ and support a 125 watt processor (or not tested OK yet) or some boards without a cpu support list yet. So no AM2+ for you if you want a 125watt processor on it and a nvidia chipset. is there any reason why MSI cant fix 125watt support?
If you dont care about a future quadcores upgrade you can buy a old AM2 board, but dont forgot to look at the cpu support list, because the most AM2 boards doesnt support 125watt either. ???
"I was looking for a 125watt board too and its really hard to find one from MSI that have the things I want, I cant even find a board with Nvidia chipset, amd2+ and support a 125 watt processor (or not tested OK yet) or some boards without a cpu support list yet. So no AM2+ for you if you want a 125watt processor on it and a nvidia chipset. is there any reason why MSI cant fix 125watt support? "
That is not true, 125W support usually have high end mainboards.
"I cant even find a board with Nvidia chipset, amd2+ and support a 125 watt processor (or not tested OK yet) or some boards without a cpu support list yet. "
Here are they:
K9N2 SLI Platinum/K9N2 Zilent ==> http://global.msi.com.tw/index.php?func=proddesc&prod_no=1443&maincat_no=1&cat2_no=171
K9N2 Diamond ==> http://global.msi.com.tw/index.php?func=proddesc&prod_no=1438&maincat_no=1&cat2_no=171
AM2+ Nvidia chipset boards, not only support 125W, but support 140W CPU too.

Can I put a amd 64 X2 3800+ on a motherboard msi K8N neo2 platinium ?

hello
I'm sorry for my bad english but I'm french ....
can I put a amd 64 X2 (dual core) 3800+ on a motherboard msi K8N neo2 platinium ?
Which is the highest processor which I can put on this mothercard ?
thanks well for your help
@+

I'm sorry but I dont find the info on the msi website. I listened it ! but I don't know the adress that you give me.
thanks well for the adress :
but I don't know if it's e4 or e6 or manchester .... if you help me for that proc :
http://cgi.ebay.fr/processeur-AMD-Athlon-64-X2-dual-core-3800-socket-939_W0QQitemZ290129683087QQihZ019QQcategoryZ80141QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and that : http://cgi.ebay.fr/AMD-Athlon-64-X2-4800-socket-939_W0QQitemZ190124445607QQihZ009QQcategoryZ80141QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and that :
http://cgi.ebay.fr/AMD-ATHLON-64-X2-4200-4-4-GHZ-1MB-CACHE-939-DUAL-CORE_W0QQitemZ270133637708QQihZ017QQcategoryZ80141QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I don't want to make a error ....
thanks very well for your help
@+

K7T266Pro2-A - system unstable wid amd athlon xp 1880+?

I have a K7T266Pro2-A motherboard wid an AMD athlon xp 1800+ processor. My main problem is when I load the optimal bios settings to get the processor at 1800+, my system becomes unstable. It works fine at the default speed of 1153 mhz. Anyone know how to fix this?

Quote
i changed my FSB to 166mhz
You mean fsb133 I think, fsb166 isn't supported by the K7T266Pro2-A.
Btw: No need for apology, better asking here than blowing up your hardware.

AMD Athlon 2400+ core speed

I have recently purchased a new MSI KT4 Ultra (FISR)
MS-6590 motherboard and an AMD Athlon 2400+ processor.
However the motherboard is only picking up the processor to be an AMD Athlon 1800+. When I go into the bios and look at the CPU core speed it is set to 100Mhz when it should be 133Mhz. I would change this value but it is disabled (greyed out). How can I set my motherboard to use the processor correctly asa 2400+ ?
Thanks
Paul

Hi, i have similer problem, i have the same MB and chip the 2400xp and when i put it on 133mhz and 15x multi which is stated on the MSI website and save it in the bios, my monitor light flashes, its like my graphics card is not working, but i can hear my pc booting up, but i just can't see anything, i have updated my graphics card drivers and the bios for the MB but still no luck, i have to clear the cmos to get my monitor back but then the chip speed is back to 1800.
i have a ti4200 8x agp card and i am a little miffed as i didn't buy a 2gig chip to have it running at 1.6gig, does anyone have any idea.
zombi69

MSI KT4 ultra and AMD ATHLON 2600+ and Corsair 512Mb 3200

Hello,
i've bought a: MSI KT4 ULTRA and a AMD ATHLON 2600+
Today, i've updated the bios to the version 1.3! So: no problem to reboot after the process complete.
BUT, now i can't set the CPU at 2.16Ghz (280Mhz clock) because if i set the clock up to 100Mhz it doesn't reboot anymore! the motherboard detect the frequency @ 1250 Mhz :(((
Please: HELP ME
(sorry for the grammar and / the english) but i'm a french guy.

Hi,
I had the same issues, see the thread:
http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=11717&boardid=13&styleid=1
Essentially I had to set (in the BIOS) the FSB to 166 and left the Multiplier on auto. This ment the processor was reported properly as 2600+, but the memory will only run at 333 MHz... Yeah I think I wasted the money on getting the latest and greatest memory too....
Had me worried for a while, I though my supplier had palmed a bad chip off on me.... It just that the board can't do the highest speed chips and the highest speed memory at the same time (it states that that is unsupported in the manual...)
hope the helps...

Can sum1 help me wif my AMD ATHLON XP 2000

i need to no if i can test my CPU or motherboard without another system the same, cause i cant get hold of a mobo to stik my CPU in or a CPU to stik in my MOBO is there any other solution say obvious signs i should look for on my mobo or CPU any help would be appriciated THANKS!!!
Problem System
MSI 6390u (VIA KM266A Chipset)(VT 8235)
AMD Athlon XP 2000+
GeForce 4 MX 128MB AGP (on-board = S3 Savage 8)
2x 256 DDR333 Kdata
30Gb Maxtor Fireball3 ATA133 4 MB
40GB Seagate Barracuda ATA100 4 MB
C-Media PCI Sound Card CM3DX (On-Board = AC'97 Audio)
DVD-RW dual layer
DVD/CD-RW combo drive
ISO 400 PSU 300w 3.3v=20A,5v=30A,12v=15A
No. 2
Gigabyte K8NS
AMD ATHLON 64 3000+
2x 512 mb DDR 400
Nvidia GeForce 6600 256MB AGP
200GB Seagate ATA 100 7200rpm
ThermalTake PurePower 420w
Samsung DVD-RW Dual Layer ATA33
Nvidia Nforce3 250 Chipset
On-Board Audio
ThermalTake PurePower 420w 5v=40A, 3.3v=30A, 12v=18A

Sweet as i dont have a problem with your rules mate its all good, and if u so good at this u could have told me to do continuity tests on my Mobo, also voltage test to verify everything getting the correct voltage, ive carried out my own tests on the mobo an what do ya no its got a bad connection through a track on the topside of the mobo right next to the CPU where the HSF connects to the foot, i have scratched the mobo surface with a screwdriver whilst removing the CPU and broken a track, so much for not been able to test this stuff osnavi, u guys deal more with software issues aye and hardware conflicts an stuff
MSI 6390u (VIA KM266A Chipset)(VT 8235)
AMD Athlon XP 2000+
GeForce 4 MX 128MB AGP (on-board = S3 Savage 8)
2x 256 DDR333 Kdata
30Gb Maxtor Fireball3 ATA133 4 MB
40GB Seagate Barracuda ATA100 4 MB
C-Media PCI Sound Card CM3DX (On-Board = AC'97 Audio)
DVD-RW dual layer
DVD/CD-RW combo drive
ISO 400 PSU 300w 3.3v=20A,5v=30A,12v=15A
No. 2
Gigabyte K8NS
AMD ATHLON 64 3000+
2x 512 mb DDR 400
Nvidia GeForce 6600 256MB AGP
200GB Seagate ATA 100 7200rpm
ThermalTake PurePower 420w
Samsung DVD-RW Dual Layer ATA33
Nvidia Nforce3 250 Chipset
On-Board Audio
ThermalTake PurePower 420w 5v=40A, 3.3v=30A, 12v=18A

KT4V and AMD Athlon Xp 2400+

Ive got a KT4V motherboard with a Geforce MX 440 Graphics card, 512DDR PC2100 Ram and an AMD Athlon Xp 2400+ Cpu. I was wondering wether anyone could tell me anything i could do to make my system run that bit faster without overclocking.
Im gonna get a new case soon with a better power supply and cooling so im glad to hear any suggestion for overclockin as well. Its not gonna be watercooled or anything like that so i cant go extreme with the fsb and stuff.

problem is your ram,your best o/c is lower multiplier,read the wire trick thread as you need that and then run it at 166 fsb or a bit more
but chances are at 166 your rams not going to boot being only pc 2100
so leave it be as far as multiplier and raise fsb a bit at a time
due to the multiplier bit your chipset uses at around mid 140 fsb it will not boot as agp and pci will be out of specs to much

BIOS PANIC---Please Help!!! (Amd athlon Xp2100+)

Hi ya'll!
2nite I got an idea to upgrade my motherboard using MSI Live update. Everything worked out fine. BUT, later on I noticed that after flashing my Cpu was set to XP1500+. Thing is I got XP2100+!!! I made a resquedisk before flashing, but it doesn't seam 2 work!
Any1 got any ideas how I could get my ordinary Cpu speed back???(1300---->1733)
System:
Amd athlon Xp 2100+
Mb MSI MS - 6712 KT3V
Ram 1024 DDR

...OK...you're in the wrong forum but here's what happened...your FSB was set to 100 after you flashed...correct setting for 2100+ XP is 133 (2 X 133 = 266MHz)...

AMD Athlon II X4 645 on Motherboard K9A2 CF

Similar Messages

Maybe you are looking for