An install operation took too long to execute - wireless install of new printer

New printer, out of the box.
Every time I try and install the printer wirelssly using the CD Rom, it stalls at 99% install and returns message
"an install operation took too long to execute. this is a fatal error preventing product use."  I have tried the following (in this order) with no success:
- Downloading latest driver (even though CD Rom install said I had the latst driver)
- Turning HP Smart Install off on the printer, removing the printer from Device Manager, rebooting and reinstalling
- Temporarily disabling firewall and virus protection software, removiremoving the printer from Device Manager, rebooting and reinstalling
Help!!

Hi @Slup ,
I see by your post that the installation is stalling at 99%. Thank you for provided all the steps you have already taken.
I would really like to be able to help you resolve this issue.
Disconnect the USB cable first.
Remove the drivers first from the Print Server Properties if you have a printer icon listed in the Devices and Printers window. Highlight the printer, across the top of the window, click on Printer Server Properties, on the Driver tab, highlight and remove the printer, LaserJetPro 200 clr MFP M276nw and any Universal PCL drivers.
Uninstall the software from the CD. Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
Uninstalling the Printer Software.
Then start the installation again, immediately follow the steps in this document after connecting the USB cable please.
A Fatal Error Displays During Software Installation.
Disregard the printer model. This should allow the software to fully install properly.
Test the printer.
How is the printer connected? (USB/Ethernet/Wireless)
Please let me know if you require any additional assistance.
Have a fantastic day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

  • HP LaserJet 1536dnf MFP - Install operation took too long to execute.

    I am running Windows XP.  When attempting to install the full driver (print, scan, fax), the setup gets to 99% and then hangs.  Eventually I receive the error message "An install operation took too long to execute.  This is a fatal error preventing product use."  There are no error codes.  I have looked through various postings and searched the internet for resolutions.  Have spent hours trying different ways but all have the same result.
    Any suggestions would be much appreciated.
    Thank you!

    If you cannot get the installation to install, did you try some of the steps in the link Shane_R offered in the previous post?
    Are you installing the printer USB, wireless, or Ethernet?
    What method are you using to install (download or software disc)?
    If download, which driver are you having problems with?
    If the previous document didn't help, then it may be a startup-service preventing the installation from going through.  Turn off your anti-virus software temporarily and follow the instructions in the link below on how do turn those services off and how to update the installer just during the installation process, and then let me know how it goes.
    --A fatal error occurred during installation' (MSI Error 1603) Displays During HP Software Installatio...--
    I know you said your problem is different than the one mentioned above but I think these steps will be the same and hopefully get your printer installed.  If it doesn't help, answer my questions above please so I can determine the next step to take.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Unable to deploy apps to SharePoint: "Operation took too long"

    Hi, I am currently developing a SharePoint application. Until recently I was able to deploy my application without any issues. However, I have been unable to deploy any custom application to SharePoint over the last couple of days. Installation of custom
    applications now seems to hang for about 15 minutes before the server responds with an error message "The operation took too long." I am perplexed, as the deployment process has been working fine made I have made no major changes to my application.
    Please let me know if you have any ideas!
    Thanks

    Hi Venktesh,
    Thanks for your prompt response.
    Sorry I should have mentioned this earlier.
    I am getting error at this line...
    p_clob := p_clob || UTL_RAW.cast_to_varchar2 (UTL_ENCODE.base64_encode (DBMS_LOB.SUBSTR (l_bfile, ncurrent_pointer, l_step)));
    This loop runs for around 5 times i.e. 5000 * 4 = 20000 and then errors out after that.
    If size of my image is below 23000, it works fine.
    Still do you think it is related to BFILE. Actually BFILE operation works successfully for around 4 times.

  • I'm in the process of installing ios 7.1 update in my  5s and it took too long. Can i stop its installation?  Great thanks.

    Hello everyone! I'm in the process of installing ios 7.1 update in my  5s and it took too long. Can i stop its installation? Can't open my phone.. what shoudl I do?  to Great thanks.

    Help pls... thank you.

  • Query is taking too long to execute - contd

    I am unable to post the entire explain plan in one post as it exceeds maximum length.
    Please advise on how to post this.
    Previous post Link : Link: Query is taking too long to execute
    Regards,
    Sreekanth Munagala.
    Edited by: Sreekanth Munagala on Oct 27, 2009 8:31 AM
    Edited by: Sreekanth Munagala on Oct 27, 2009 8:34 AM

    Hi Tubby,
    Today i executed only the first query in the view and it took almost 2.5 hrs.
    Here is the explain plan for this query
    SQL> SET SERVEROUTPUT ON
    SQL> set linesize 200
    SQL> select * from table(dbms_xplan.display);
    PLAN_TABLE_OUTPUT                                                                                                                                                                                      
    | Id  | Operation                                        |  Name                         | Rows  | Bytes | Cost  |                                                                                     
    |   0 | SELECT STATEMENT                                 |                               |     1 |   766 |  2448 |                                                                                     
    |   1 |  TABLE ACCESS BY INDEX ROWID                     | PO_VENDORS                    |     1 |    13 |     3 |                                                                                     
    |*  2 |   INDEX UNIQUE SCAN                              | PO_VENDORS_U1                 |     1 |       |     2 |                                                                                     
    |   3 |  TABLE ACCESS BY INDEX ROWID                     | PO_VENDORS                    |     1 |    29 |     3 |                                                                                     
    |*  4 |   INDEX UNIQUE SCAN                              | PO_VENDORS_U1                 |     1 |       |     2 |                                                                                     
    |   5 |  VIEW                                            | POC_ASN_PICKUP_LOCATIONS_V    |     2 |  2426 |    17 |                                                                                     
    |   6 |   UNION-ALL                                      |                               |       |       |       |                                                                                     
    |   7 |    NESTED LOOPS                                  |                               |     1 |    85 |     4 |                                                                                     
    |   8 |     NESTED LOOPS                                 |                               |     1 |    78 |     4 |                                                                                     
    |*  9 |      TABLE ACCESS BY INDEX ROWID                 | PO_VENDOR_SITES_ALL           |     1 |    73 |     3 |                                                                                     
    |* 10 |       INDEX UNIQUE SCAN                          | PO_VENDOR_SITES_U2            |     1 |       |     2 |                                                                                     
    |* 11 |      INDEX UNIQUE SCAN                           | PO_VENDORS_U1                 |     1 |     5 |     1 |                                                                                     
    |* 12 |     INDEX UNIQUE SCAN                            | FND_TERRITORIES_TL_U1         |     1 |     7 |       |                                                                                     
    |  13 |    NESTED LOOPS                                  |                               |     1 |    91 |    13 |                                                                                     
    |  14 |     NESTED LOOPS                                 |                               |     1 |    84 |    13 |                                                                                     
    |  15 |      TABLE ACCESS BY INDEX ROWID                 | PO_VENDORS                    |     1 |    13 |     3 |                                                                                     
    |* 16 |       INDEX UNIQUE SCAN                          | PO_VENDORS_U1                 |     1 |       |     2 |                                                                                     
    PLAN_TABLE_OUTPUT                                                                                                                                                                                      
    |* 17 |      TABLE ACCESS BY INDEX ROWID                 | FND_LOOKUP_VALUES             |     1 |    71 |    10 |                                                                                     
    |* 18 |       INDEX RANGE SCAN                           | FND_LOOKUP_VALUES_U2          |    13 |       |     2 |                                                                                     
    |* 19 |     INDEX UNIQUE SCAN                            | FND_TERRITORIES_TL_U1         |     1 |     7 |       |                                                                                     
    |* 20 |  COUNT STOPKEY                                   |                               |       |       |       |                                                                                     
    |  21 |   TABLE ACCESS BY INDEX ROWID                    | MTL_SYSTEM_ITEMS_B            |     8 |   136 |    12 |                                                                                     
    |* 22 |    INDEX RANGE SCAN                              | MTL_SYSTEM_ITEMS_B_U1         |     8 |       |     3 |                                                                                     
    |* 23 |  COUNT STOPKEY                                   |                               |       |       |       |                                                                                     
    |  24 |   TABLE ACCESS BY INDEX ROWID                    | MTL_SYSTEM_ITEMS_B            |     8 |   288 |    12 |                                                                                     
    |* 25 |    INDEX RANGE SCAN                              | MTL_SYSTEM_ITEMS_B_U1         |     8 |       |     3 |                                                                                     
    |  26 |  TABLE ACCESS BY INDEX ROWID                     | FND_TERRITORIES_TL            |     1 |    24 |     2 |                                                                                     
    |* 27 |   INDEX UNIQUE SCAN                              | FND_TERRITORIES_TL_U1         |     1 |       |     1 |                                                                                     
    |  28 |  NESTED LOOPS                                    |                               |     1 |    40 |     5 |                                                                                     
    |  29 |   TABLE ACCESS BY INDEX ROWID                    | HZ_CUST_ACCOUNTS              |     1 |    11 |     3 |                                                                                     
    |* 30 |    INDEX UNIQUE SCAN                             | HZ_CUST_ACCOUNTS_U1           |     1 |       |     2 |                                                                                     
    |  31 |   TABLE ACCESS BY INDEX ROWID                    | HZ_PARTIES                    |     1 |    29 |     2 |                                                                                     
    |* 32 |    INDEX UNIQUE SCAN                             | HZ_PARTIES_U1                 |     1 |       |     1 |                                                                                     
    |  33 |  TABLE ACCESS BY INDEX ROWID                     | FND_TERRITORIES_TL            |     1 |    24 |     2 |                                                                                     
    |* 34 |   INDEX UNIQUE SCAN                              | FND_TERRITORIES_TL_U1         |     1 |       |     1 |                                                                                     
    |  35 |  TABLE ACCESS BY INDEX ROWID                     | FND_TERRITORIES_TL            |     1 |    24 |     2 |                                                                                     
    |* 36 |   INDEX UNIQUE SCAN                              | FND_TERRITORIES_TL_U1         |     1 |       |     1 |                                                                                     
    |* 37 |  COUNT STOPKEY                                   |                               |       |       |       |                                                                                     
    PLAN_TABLE_OUTPUT                                                                                                                                                                                      
    |* 38 |   TABLE ACCESS BY INDEX ROWID                    | ONTC_MTC_PROFORMA_HEADERS     |     1 |    21 |     3 |                                                                                     
    |* 39 |    INDEX RANGE SCAN                              | ONTC_MTC_PROFORMA_HEADERS_U2  |     1 |       |     2 |                                                                                     
    |  40 |  TABLE ACCESS BY INDEX ROWID                     | FND_TERRITORIES_TL            |     1 |    24 |     2 |                                                                                     
    |* 41 |   INDEX UNIQUE SCAN                              | FND_TERRITORIES_TL_U1         |     1 |       |     1 |                                                                                     
    |* 42 |  COUNT STOPKEY                                   |                               |       |       |       |                                                                                     
    |* 43 |   TABLE ACCESS BY INDEX ROWID                    | ONTC_MTC_PROFORMA_HEADERS     |     1 |    21 |     3 |                                                                                     
    |* 44 |    INDEX RANGE SCAN                              | ONTC_MTC_PROFORMA_HEADERS_U2  |     1 |       |     2 |                                                                                     
    |  45 |  SORT AGGREGATE                                  |                               |     1 |    39 |       |                                                                                     
    |  46 |   NESTED LOOPS OUTER                             |                               |     2 |    78 |  1828 |                                                                                     
    |* 47 |    TABLE ACCESS FULL                             | ONTC_MTC_PROFORMA_HEADERS     |     1 |    24 |  1825 |                                                                                     
    |  48 |    TABLE ACCESS BY INDEX ROWID                   | ONTC_MTC_PROFORMA_LINES       |     5 |    75 |     3 |                                                                                     
    |* 49 |     INDEX RANGE SCAN                             | ONTC_MTC_PROFORMA_LINES_PK    |    11 |       |     2 |                                                                                     
    |  50 |  NESTED LOOPS                                    |                               |     1 |   766 |  2448 |                                                                                     
    |  51 |   NESTED LOOPS                                   |                               |     1 |   761 |  2447 |                                                                                     
    |  52 |    NESTED LOOPS                                  |                               |     1 |   746 |  2445 |                                                                                     
    |  53 |     NESTED LOOPS                                 |                               |     1 |   694 |  2443 |                                                                                     
    |  54 |      NESTED LOOPS                                |                               |     1 |   682 |  2441 |                                                                                     
    |  55 |       NESTED LOOPS                               |                               |     1 |   671 |  2439 |                                                                                     
    |  56 |        NESTED LOOPS                              |                               |     1 |   612 |  2437 |                                                                                     
    |  57 |         NESTED LOOPS                             |                               |     1 |   600 |  2435 |                                                                                     
    |  58 |          NESTED LOOPS                            |                               |     1 |   575 |  2433 |                                                                                     
    PLAN_TABLE_OUTPUT                                                                                                                                                                                      
    |  59 |           NESTED LOOPS                           |                               |     1 |   552 |  2431 |                                                                                     
    |  60 |            NESTED LOOPS                          |                               |     1 |   533 |  2429 |                                                                                     
    |  61 |             NESTED LOOPS                         |                               |     1 |   524 |  2428 |                                                                                     
    |  62 |              NESTED LOOPS                        |                               |     1 |   455 |  2427 |                                                                                     
    |  63 |               NESTED LOOPS                       |                               |     1 |   429 |  2426 |                                                                                     
    |  64 |                NESTED LOOPS                      |                               |     1 |   389 |  2424 |                                                                                     
    |  65 |                 NESTED LOOPS                     |                               |     1 |   368 |  2422 |                                                                                     
    |  66 |                  NESTED LOOPS                    |                               |     1 |   308 |  2421 |                                                                                     
    |  67 |                   NESTED LOOPS                   |                               |     1 |   281 |  2419 |                                                                                     
    |  68 |                    NESTED LOOPS                  |                               |     1 |   253 |  2418 |                                                                                     
    |  69 |                     NESTED LOOPS                 |                               |     1 |   214 |  2416 |                                                                                     
    |  70 |                      NESTED LOOPS                |                               |    39 |  7371 |  2338 |                                                                                     
    |* 71 |                       TABLE ACCESS FULL          | RCV_SHIPMENT_HEADERS          |    39 |  5070 |  2221 |                                                                                     
    |* 72 |                       TABLE ACCESS BY INDEX ROWID| RCV_SHIPMENT_LINES            |     1 |    59 |     3 |                                                                                     
    |* 73 |                        INDEX RANGE SCAN          | RCV_SHIPMENT_LINES_U2         |     1 |       |     2 |                                                                                     
    |* 74 |                      TABLE ACCESS BY INDEX ROWID | PO_LINES_ALL                  |     1 |    25 |     2 |                                                                                     
    |* 75 |                       INDEX UNIQUE SCAN          | PO_LINES_U1                   |     1 |       |     1 |                                                                                     
    |* 76 |                     TABLE ACCESS BY INDEX ROWID  | PO_LINE_LOCATIONS_ALL         |     1 |    39 |     2 |                                                                                     
    |* 77 |                      INDEX UNIQUE SCAN           | PO_LINE_LOCATIONS_U1          |     1 |       |     1 |                                                                                     
    |* 78 |                    TABLE ACCESS BY INDEX ROWID   | PO_HEADERS_ALL                |     1 |    28 |     1 |                                                                                     
    |* 79 |                     INDEX UNIQUE SCAN            | PO_HEADERS_U1                 |     1 |       |       |                                                                                     
    PLAN_TABLE_OUTPUT                                                                                                                                                                                      
    |* 80 |                   TABLE ACCESS BY INDEX ROWID    | OE_ORDER_LINES_ALL            |     1 |    27 |     2 |                                                                                     
    |* 81 |                    INDEX UNIQUE SCAN             | OE_ORDER_LINES_U1             |     1 |       |     1 |                                                                                     
    |  82 |                  TABLE ACCESS BY INDEX ROWID     | OE_ORDER_HEADERS_ALL          |     1 |    60 |     1 |                                                                                     
    |* 83 |                   INDEX UNIQUE SCAN              | OE_ORDER_HEADERS_U1           |     1 |       |       |                                                                                     
    |* 84 |                 TABLE ACCESS BY INDEX ROWID      | HZ_CUST_SITE_USES_ALL         |     1 |    21 |     2 |                                                                                     
    |* 85 |                  INDEX UNIQUE SCAN               | HZ_CUST_SITE_USES_U1          |     1 |       |     1 |                                                                                     
    |* 86 |                TABLE ACCESS BY INDEX ROWID       | HZ_CUST_SITE_USES_ALL         |     1 |    40 |     2 |                                                                                     
    |* 87 |                 INDEX UNIQUE SCAN                | HZ_CUST_SITE_USES_U1          |     1 |       |     1 |                                                                                     
    |  88 |               TABLE ACCESS BY INDEX ROWID        | WSH_CARRIERS                  |     1 |    26 |     1 |                                                                                     
    |* 89 |                INDEX UNIQUE SCAN                 | WSH_CARRIERS_U2               |     1 |       |       |                                                                                     
    |* 90 |              TABLE ACCESS BY INDEX ROWID         | WSH_CARRIER_SERVICES          |     1 |    69 |     1 |                                                                                     
    |* 91 |               INDEX RANGE SCAN                   | WSH_CARRIER_SERVICES_N1       |     2 |       |       |                                                                                     
    |* 92 |             TABLE ACCESS BY INDEX ROWID          | WSH_ORG_CARRIER_SERVICES      |     1 |     9 |     1 |                                                                                     
    |* 93 |              INDEX RANGE SCAN                    | WSH_ORG_CARRIER_SERVICES_N1   |     1 |       |       |                                                                                     
    |  94 |            TABLE ACCESS BY INDEX ROWID           | HZ_CUST_ACCOUNTS              |     1 |    19 |     2 |                                                                                     
    |* 95 |             INDEX UNIQUE SCAN                    | HZ_CUST_ACCOUNTS_U1           |     1 |       |     1 |                                                                                     
    |* 96 |           TABLE ACCESS BY INDEX ROWID            | HZ_CUST_ACCT_SITES_ALL        |     1 |    23 |     2 |                                                                                     
    |* 97 |            INDEX UNIQUE SCAN                     | HZ_CUST_ACCT_SITES_U1         |     1 |       |     1 |                                                                                     
    |* 98 |          TABLE ACCESS BY INDEX ROWID             | HZ_CUST_ACCT_SITES_ALL        |     1 |    25 |     2 |                                                                                     
    |* 99 |           INDEX UNIQUE SCAN                      | HZ_CUST_ACCT_SITES_U1         |     1 |       |     1 |                                                                                     
    | 100 |         TABLE ACCESS BY INDEX ROWID              | HZ_PARTY_SITES                |     1 |    12 |     2 |                                                                                     
    PLAN_TABLE_OUTPUT                                                                                                                                                                                      
    |*101 |          INDEX UNIQUE SCAN                       | HZ_PARTY_SITES_U1             |     1 |       |     1 |                                                                                     
    | 102 |        TABLE ACCESS BY INDEX ROWID               | HZ_LOCATIONS                  |     1 |    59 |     2 |                                                                                     
    |*103 |         INDEX UNIQUE SCAN                        | HZ_LOCATIONS_U1               |     1 |       |     1 |                                                                                     
    |*104 |       INDEX RANGE SCAN                           | HZ_LOC_ASSIGNMENTS_N1         |     1 |    11 |     2 |                                                                                     
    | 105 |      TABLE ACCESS BY INDEX ROWID                 | HZ_PARTY_SITES                |     1 |    12 |     2 |                                                                                     
    |*106 |       INDEX UNIQUE SCAN                          | HZ_PARTY_SITES_U1             |     1 |       |     1 |                                                                                     
    | 107 |     TABLE ACCESS BY INDEX ROWID                  | HZ_LOCATIONS                  |     1 |    52 |     2 |                                                                                     
    |*108 |      INDEX UNIQUE SCAN                           | HZ_LOCATIONS_U1               |     1 |       |     1 |                                                                                     
    |*109 |    INDEX RANGE SCAN                              | HZ_LOC_ASSIGNMENTS_N1         |     1 |    15 |     2 |                                                                                     
    |*110 |   INDEX UNIQUE SCAN                              | HZ_PARTIES_U1                 |     1 |     5 |     1 |                                                                                     
    I will put the predicate information in another post.
    193 rows selected.
    SQL> spool offPlease suggest on how can we improve the performance.
    Regards,
    Sreekanth Munagala.

  • Last flush took too long message in history files

    On a few occations I have observed the following warning the
    the history files:
    TRANS BEWARE Jul 7 12:29:40 Last flush took too long (314 msecs)
    What does this mean? Is it an indication of something serious wrong
    with the HADB server?

    http://docs.sun.com/source/817-5051/pt_tuningHADB.html -
    "To avoid this problem, keep the HADB executables and the history files on physical disks other than those keeping the data devices."
    -Alexis

  • This report cannot be executed because it may take too long to execute

    Dear expert,
    i am getting below message when user is trying to execute the report. I am new to Basis support, can any one let me know how to resolve this problem. This in R3 4.6 version
    "This report cannot be executed because it may take too long to execute"
    Thanks in advance for your help.
    Regards.
    Ameture

    Hi Ameture,
    This is not permanant solution, for better and running smooth business pls inform to ababper to change bad codding and provide expert coding so that you can run this report at any time. Becuase same problem already done with me. I have checked all the thing even the coding also and inform to abaper to change specific coding and expert coding. I found result immediately, earlier that report took 3-4 hours and now take 15-20 minuts only. Now user and myself both are happy.
    Regards,
    Anil

  • NetworkManager: "association took too long"

    I have been running arch linux on this laptop for a year now, with the broadcom-wl driver for my card. As of yesterday, WPA encryption stopped working.
    Regular, non-encrypted wireless works fine - but WPA2 Enterprise encryption won't work, and the only message  that I could see was 'Activation (eth0/wireless): association took too long.'
    Here is the whole log (from /var/log/daemon.log):
    The Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) starting connection 'YaleSecure'
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0]
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0/wireless): access point 'YaleSecure' has security, but secrets are required.
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> (eth0): device state change: config -> need-auth (reason 'none') [50 60 0]
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> (eth0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0]
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0/wireless): connection 'YaleSecure' has security, and secrets exist. No new secrets needed.
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Config: added 'ssid' value 'YaleSecure'
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-EAP'
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Config: added 'auth_alg' value 'OPEN'
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Config: added 'password' value '<omitted>'
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Config: added 'eap' value 'TTLS'
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Config: added 'fragment_size' value '1300'
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Config: added 'phase2' value 'auth=MSCHAPV2'
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Config: added 'identity' value '********'
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Config: added 'bgscan' value 'simple:30:-45:300'
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
    Sep 24 15:14:37 localhost NetworkManager[1039]: <info> Config: set interface ap_scan to 1
    Sep 24 15:14:38 localhost NetworkManager[1039]: <info> (eth0): supplicant interface state: inactive -> scanning
    Sep 24 15:14:38 localhost NetworkManager[1039]: <info> (eth0): supplicant interface state: scanning -> associating
    Sep 24 15:14:39 localhost NetworkManager[1039]: <info> (eth0): supplicant interface state: associating -> associated
    Sep 24 15:14:41 localhost NetworkManager[1039]: <info> (eth0): supplicant interface state: associated -> disconnected
    Sep 24 15:14:45 localhost ntpd[1036]: Deleting interface #4 eth1, 128.36.14.121#123, interface stats: received=33, sent=37, dropped=3, active_time=600 secs
    Sep 24 15:14:45 localhost ntpd[1036]: 129.6.15.29 interface 128.36.14.121 -> (none)
    Sep 24 15:14:45 localhost ntpd[1036]: 129.6.15.28 interface 128.36.14.121 -> (none)
    Sep 24 15:14:45 localhost ntpd[1036]: 64.90.182.55 interface 128.36.14.121 -> (none)
    Sep 24 15:14:45 localhost ntpd[1036]: 169.229.70.183 interface 128.36.14.121 -> (none)
    Sep 24 15:14:45 localhost ntpd[1036]: peers refreshed
    Sep 24 15:15:02 localhost NetworkManager[1039]: <warn> Activation (eth0/wireless): association took too long.
    Sep 24 15:15:02 localhost NetworkManager[1039]: <info> (eth0): device state change: config -> need-auth (reason 'none') [50 60 0]
    Sep 24 15:15:02 localhost NetworkManager[1039]: <warn> Activation (eth0/wireless): asking for new secrets
    Sep 24 15:15:11 localhost NetworkManager[1039]: <info> (eth0): supplicant interface state: disconnected -> inactive
    I did upgrade some packages yesterday, but I can't figure out what it could have been. My wireless was working on 9/23, and I restarted at least once that day. I tried downgrading 'python-mako', 'openconnect', 'python2-pyopenssl' and 'glib-networking' and restarting, but that didn't help.
    Here is the pacman log from before the wireless stopped working:
    [2011-09-15 16:45] Running 'pacman -Syu'
    [2011-09-15 16:45] synchronizing package lists
    [2011-09-15 16:45] starting full system upgrade
    [2011-09-20 11:28] Running 'pacman -Syu'
    [2011-09-20 11:28] synchronizing package lists
    [2011-09-20 11:28] starting full system upgrade
    [2011-09-20 11:35] Running 'pacman -R ipython'
    [2011-09-20 11:35] removed ipython (0.11-1)
    [2011-09-20 11:35] Running 'pacman -S -- ipython'
    [2011-09-20 11:36] Running 'pacman -S -- ipython ipython2'
    [2011-09-20 11:36] Running 'pacman -S -- ipython ipython2'
    [2011-09-20 11:39] Running 'pacman -R ipython-docs'
    [2011-09-20 11:39] removed ipython-docs (0.11-1)
    [2011-09-20 11:39] Running 'pacman -R ipython3'
    [2011-09-20 11:39] removed ipython3 (0.11-1)
    [2011-09-20 11:39] Running 'pacman -S -- ipython ipython2'
    [2011-09-20 11:39] installed ipython (0.11-3)
    [2011-09-20 11:39] installed ipython2 (0.11-3)
    [2011-09-20 11:40] Running 'pacman -S -- python-pygments python2-sip python2-pyqt'
    [2011-09-21 00:37] Running 'pacman -Syu'
    [2011-09-21 00:37] synchronizing package lists
    [2011-09-21 00:37] starting full system upgrade
    [2011-09-21 00:38] upgraded libmysqlclient (5.5.15-1 -> 5.5.16-1)
    [2011-09-21 00:38] upgraded mysql-clients (5.5.15-1 -> 5.5.16-1)
    [2011-09-21 00:38] upgraded mysql (5.5.15-1 -> 5.5.16-1)
    [2011-09-21 00:38] upgraded akonadi (1.6.0-3 -> 1.6.1-1)
    [2011-09-21 00:38] upgraded chromium (13.0.782.220-1 -> 14.0.835.163-1)
    [2011-09-21 00:38] upgraded sdl (1.2.14-7 -> 1.2.14-8)
    [2011-09-21 00:38] upgraded ffmpeg (20110910-1 -> 20110916-1)
    [2011-09-21 00:38] upgraded file (5.08-1 -> 5.09-1)
    [2011-09-21 00:38] upgraded git (1.7.6.1-1 -> 1.7.6.3-1)
    [2011-09-21 00:38] installed p11-kit (0.6-2)
    [2011-09-21 00:38] upgraded gnutls (3.0.2-1 -> 3.0.3-1)
    [2011-09-21 00:38] upgraded glib-networking (2.28.7-4 -> 2.28.7-5)
    [2011-09-21 00:38] upgraded gparted (0.9.0-3 -> 0.9.1-1)
    [2011-09-21 00:38] upgraded gpodder (2.18-1 -> 2.19-1)
    [2011-09-21 00:38] upgraded lftp (4.3.1-2 -> 4.3.2-1)
    [2011-09-21 00:38] upgraded lib32-nspr (4.8.6-2 -> 4.8.9-1)
    [2011-09-21 00:38] upgraded lib32-nss (3.12.8-1 -> 3.12.11-1)
    [2011-09-21 00:38] upgraded librsvg (2.34.1-1 -> 2.34.1-2)
    [2011-09-21 00:38] upgraded libssh (0.5.1-1 -> 0.5.2-1)
    [2011-09-21 00:38] upgraded libwebkit (1.4.2-1 -> 1.4.3-1)
    [2011-09-21 00:38] upgraded libwebkit3 (1.4.2-1 -> 1.4.3-1)
    [2011-09-21 00:38] upgraded lua (5.1.4-7 -> 5.1.4-8)
    [2011-09-21 00:38] upgraded ocaml (3.12.1-1 -> 3.12.1-2)
    [2011-09-21 00:38] upgraded python2-numpy (1.6.0-1 -> 1.6.1-1)
    [2011-09-21 00:38] upgraded python-numpy (1.6.0-1 -> 1.6.1-1)
    [2011-09-21 00:38] upgraded totem-plparser (2.32.5-1 -> 2.32.6-1)
    [2011-09-21 00:38] upgraded wget (1.13.3-1 -> 1.13.4-1)
    [2011-09-21 00:38] upgraded xorg-server-common (1.10.3.901-1 -> 1.10.4-1)
    [2011-09-21 00:39] upgraded xorg-server (1.10.3.901-1 -> 1.10.4-1)
    [2011-09-21 08:14] Running 'pacman -Syu'
    [2011-09-21 08:14] synchronizing package lists
    [2011-09-21 08:14] starting full system upgrade
    [2011-09-21 08:14] upgraded chromium (14.0.835.163-1 -> 14.0.835.186-1)
    [2011-09-21 08:15] Running 'pacman -U vidalia-0.2.14-1-x86_64.pkg.tar.xz'
    [2011-09-21 08:15] upgraded vidalia (0.2.12-1 -> 0.2.14-1)
    [2011-09-21 08:15] Running 'pacman -Syu'
    [2011-09-21 08:15] synchronizing package lists
    [2011-09-21 08:15] starting full system upgrade
    [2011-09-22 13:32] Running 'pacman -S -- impressive'
    [2011-09-22 13:33] installed impressive (0.10.3-2)
    [2011-09-22 13:33] Running 'pacman -S -- pdftk'
    [2011-09-22 13:33] installed gcc-gcj-ecj (4.5-1)
    [2011-09-22 13:33] installed gcc-gcj (4.6.1-1)
    [2011-09-22 13:33] installed pdftk (1.44-4)
    [2011-09-22 17:07] Running 'pacman -Syu'
    [2011-09-22 17:07] synchronizing package lists
    [2011-09-22 17:07] starting full system upgrade
    [2011-09-22 17:07] upgraded cython (0.15-1 -> 0.15.1-1)
    [2011-09-22 17:07] upgraded deluge (1.3.3-2 -> 1.3.3-3)
    [2011-09-22 17:07] upgraded kde-agent (20110602-1 -> 20110922-1)
    [2011-09-22 17:07] upgraded sdl (1.2.14-8 -> 1.2.14-9)
    [2011-09-22 17:08] Updating font cache... done.
    [2011-09-22 17:08] upgraded ttf-liberation (1.07.0-1 -> 1.07.1-1)
    [2011-09-22 17:08] upgraded virtuoso (6.1.3-1 -> 6.1.3-2)
    [2011-09-22 21:39] Running 'pacman -Syu'
    [2011-09-22 21:39] synchronizing package lists
    [2011-09-22 21:39] starting full system upgrade
    [2011-09-23 23:17] Running 'pacman -Syu'
    [2011-09-23 23:17] synchronizing package lists
    [2011-09-23 23:18] starting full system upgrade
    [2011-09-24 01:06] Running 'pacman -Syu'
    [2011-09-24 01:06] synchronizing package lists
    [2011-09-24 01:06] starting full system upgrade
    [2011-09-24 01:07] upgraded python2-pyopenssl (0.12-1 -> 0.13-1)
    [2011-09-24 01:07] upgraded deluge (1.3.3-3 -> 1.3.3-4)
    [2011-09-24 01:07] upgraded docutils (0.8-1 -> 0.8.1-1)
    [2011-09-24 01:07] upgraded ffmpeg (20110916-1 -> 20110923-1)
    [2011-09-24 01:07] upgraded gstreamer0.10-ffmpeg (0.10.11-1 -> 0.10.12-1)
    [2011-09-24 01:07] upgraded openconnect (1:3.11-1 -> 1:3.12-1)
    [2011-09-24 01:07] upgraded python-mako (0.4.1-1 -> 0.4.2-1)
    [2011-09-24 01:08] upgraded wine (1.3.28-1 -> 1.3.29-1)
    [2011-09-24 01:32] Running 'pacman -Syu'
    [2011-09-24 01:32] synchronizing package lists
    [2011-09-24 01:32] starting full system upgrade
    [2011-09-24 01:33] Running 'pacman -Syyu'
    [2011-09-24 01:33] synchronizing package lists
    [2011-09-24 01:33] starting full system upgrade
    [2011-09-24 01:33] Running 'pacman-color -Syyu'
    [2011-09-24 01:33] synchronizing package lists
    [2011-09-24 01:33] starting full system upgrade
    [2011-09-24 01:34] Running 'pacman -Syu'
    [2011-09-24 01:34] synchronizing package lists
    [2011-09-24 01:34] starting full system upgrade
    [2011-09-24 01:34] Running 'pacman -U packer-20110924-1-any.pkg.tar.xz'
    [2011-09-24 01:34] upgraded packer (20110808-1 -> 20110924-1)
    [2011-09-24 01:35] Running 'pacman -U pidgin-gnome-shell-extension-git-20110924-1-any.pkg.tar.xz'
    [2011-09-24 01:35] upgraded pidgin-gnome-shell-extension-git (20110624-1 -> 20110924-1)
    [2011-09-24 01:35] Running 'pacman -U reinteract-git-20110924-1-x86_64.pkg.tar.xz'
    [2011-09-24 01:35] upgraded reinteract-git (20110726-1 -> 20110924-1)
    I would appreciate any help. Thanks!

    Same here broadcom card and used brcmsmac driver. Fuck networkmanager, use wicd and wicd-gtk = flawless victory.

  • Update statement taking too long to execute

    Hi All,
    I'm trying to run this update statement. But its taking too long to execute.
        UPDATE ops_forecast_extract b SET position_id = (SELECT a.row_id
            FROM s_postn a
            WHERE UPPER(a.desc_text) = UPPER(TRIM(B.POSITION_NAME)))
            WHERE position_level = 7
            AND b.am_id IS NULL;
            SELECT COUNT(*) FROM S_POSTN;
            214665
            SELECT COUNT(*) FROM ops_forecast_extract;
            49366
    SELECT count(*)
            FROM s_postn a, ops_forecast_extract b
            WHERE UPPER(a.desc_text) = UPPER(TRIM(B.POSITION_NAME));
    575What could be the reason for update statement to execute so long?
    Thanks

    polasa wrote:
    Hi All,
    I'm trying to run this update statement. But its taking too long to execute.
    What could be the reason for update statement to execute so long?You haven't said what "too long" means, but a simple reason could be that the scalar subquery on "s_postn" is using a full table scan for each execution. Potentially this subquery gets executed for each row of the "ops_forecast_extract" table that satisfies your filter predicates. "Potentially" because of the cunning "filter/subquery optimization" of the Oracle runtime engine that attempts to cache the results of already executed instances of the subquery. Since the in-memory hash table that holds these cached results is of limited size, the optimization algorithm depends on the sort order of the data and could suffer from hash collisions it's unpredictable how well this optimization works in your particular case.
    You might want to check the execution plan, it should tell you at least how Oracle is going to execute the scalar subquery (it doesn't tell you anything about this "filter/subquery optimization" feature).
    Generic instructions how to generate a useful explain plan output and how to post it here follow:
    Could you please post an properly formatted explain plan output using DBMS_XPLAN.DISPLAY including the "Predicate Information" section below the plan to provide more details regarding your statement. Please use the {noformat}[{noformat}code{noformat}]{noformat} tag before and {noformat}[{noformat}/code{noformat}]{noformat} tag after or the {noformat}{{noformat}code{noformat}}{noformat} tag before and after to enhance readability of the output provided:
    In SQL*Plus:
    SET LINESIZE 130
    EXPLAIN PLAN FOR <your statement>;
    SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);Note that the package DBMS_XPLAN.DISPLAY is only available from 9i on.
    In 9i and above, if the "Predicate Information" section is missing from the DBMS_XPLAN.DISPLAY output but you get instead the message "Plan table is old version" then you need to re-create your plan table using the server side script "$ORACLE_HOME/rdbms/admin/utlxplan.sql".
    In previous versions you could run the following in SQL*Plus (on the server) instead:
    @?/rdbms/admin/utlxplsA different approach in SQL*Plus:
    SET AUTOTRACE ON EXPLAIN
    <run your statement>;will also show the execution plan.
    In order to get a better understanding where your statement spends the time you might want to turn on SQL trace as described here:
    When your query takes too long ...
    and post the "tkprof" output here, too.
    Regards,
    Randolf
    Oracle related stuff blog:
    http://oracle-randolf.blogspot.com/
    SQLTools++ for Oracle (Open source Oracle GUI for Windows):
    http://www.sqltools-plusplus.org:7676/
    http://sourceforge.net/projects/sqlt-pp/

  • Oracle8i Install: Argument list too long

    When I try to install Oracle8i Enterprise 815 on Linux-Mandrake
    6.0 (2.2.12 kernel) using a bash shell under fvwm/KDE/GNOME, I
    get the following error messages:
    [oracle]$ ./runinstaller
    Intializing Java Virtual Machine from /usr/local/bin/jre. Please
    wait..
    Error in CreateOUIProcess(): -1
    : Argument list too long
    Would anyone have an idea what's going wrong here?
    Thanks.
    Scott Langley
    [email protected]
    null

    How large is ARG_MAX in /usr/src/linux/include/linux/limits.h and
    MAX_ARG_PAGES in ./include/linux/binfmts.h? On my system (RH6),
    ARG_MAX is 128K and MAX_ARG_PAGES is 32 (4K pages). The argument
    lists used by the Oracle installer for its subprocesses are
    pretty long!
    -David
    Scott Langley (guest) wrote:
    : When I try to install Oracle8i Enterprise 815 on Linux-Mandrake
    : 6.0 (2.2.12 kernel) using a bash shell under fvwm/KDE/GNOME, I
    : get the following error messages:
    : [oracle]$ ./runinstaller
    : Intializing Java Virtual Machine from /usr/local/bin/jre.
    Please
    : wait..
    : Error in CreateOUIProcess(): -1
    : : Argument list too long
    : Would anyone have an idea what's going wrong here?
    : Thanks.
    : Scott Langley
    : [email protected]
    null

  • UIMsg_RefreshWindows is taking too long to execute

    Hi all,
    I have a Process Model sequence file that calls the PostUIMessageEx method with the UIMsg_RefreshWindows parameter on the SequenceFielPostStepRuntimeError and the SequenceFilePostStepFailure callbacks. This has been taking really long to execute (>3 minutes) since I moved to TS3.5 about a month ago. Do you guys know of any issue of this method with these particular  parameters on TS3.5? What could be causing this problem?
    Attachments:
    UIMsg.jpg ‏92 KB

    Hi, <<...
    There is nothing out of normal among your parameters. The synchronize option you selected is going to make the method wait until the operator interface process the message. So it depends on what you put in your UI message event handler. I'm not aware of anything related to this method itself that could cause this slow execution behavior. If you could send us a simplified version of the project, maybe we can further investigate the issue.
    Song D
    Regards,
    Song Du
    Systems Software
    National Instruments R&D

  • Query taking too long to execute

    Hi All,
    I have just moved a cube from DEV to Q and loaded the data(using INIT). I have created a query to test the data. When I execute the query, the initial result is showing up quickly but when I drill down using one char, say CHAR ABC, it is taking a lot time(I am waiting from last 25 min to see the result but it is still running). The same query is not taking any time when run in T. What could be the problem. This query is my first query in Q.
    Any suggestions would be highly appreciated.
    Best Rgds,
    James.

    GO to RSRV and you will see a an option " All combined tests.
    IN that, you will see " Check data for master data". Double click that and enter your CHAR* and run the test.
    Next under transaction data " run each of the tests" for the ODS / Cube that you run the report from.
    These tests usually will point to inconsistency. You may also want to look the design of cube / ODS. In ODS, you may have to check the key fields.
    Ravi Thothadri

  • Query taking too long to execute after clone

    Hi All,
    We have a query which is working fine in our development environment and taking around 15 secs to execute the query. When we run the same query with same parameters in a recently cloned instance, the query is taking 1200 secs to execute.
    Please help us on this issue.
    Thanks,
    Raghava

    Hi All,
    I have 4 unions in my query. individual sqls are running in very less time. But when i use all of them in UNION then im getting performance issue. Below is my query:
    SELECT /*+ parallel(xla_l) parallel(xla_h) leading(xla_h) */
    XLA_L.code_combination_id,
    gl.name,
    fnd_flex_ext.get_segs('SQLGL', 'GL#', gl.chart_of_accounts_id, xla_l.code_combination_id) ACCOUNT,
    xla_oa_functions_pkg.get_ccid_description (gl.chart_of_accounts_id, xla_l.code_combination_id) account_description ,
    xla_h.accounting_date,
    XLA_L.accounting_class_code,
    NVL(lk7.meaning, xla_l.accounting_class_code) accounting_class,
    xla_h.entity_id,
    xla_h.event_type_code,
    et.event_class_code,
    bud.budget_name,
    xla_h.ledger_id,
    xla_l.entered_dr,
    xla_l.entered_cr,
    te.ledger_id trx_ledger_id,
    te.legal_entity_id,
    et.entity_code,
    te.source_id_int_1,
    te.source_id_int_2,
    te.source_id_int_3,
    te.source_id_int_4,
    te.source_id_char_1,
    te.source_id_char_2,
    te.source_id_char_3,
    te.source_id_char_4,
    te.security_id_int_1,
    te.security_id_int_2,
    te.security_id_int_3,
    te.security_id_char_1,
    te.security_id_char_2,
    te.security_id_char_3,
    te.valuation_method,
    xla_h.application_id,
    xs.drilldown_procedure_name,
    GL_CUSTOM_DRILL_DOWN.get_trx_description(te.source_id_int_1,et.entity_code) description,
    null fleet_number,
    null Vendor_Name,
    xs.je_source_name JournalSource,
    xla_h.je_category_name JournalCategory,
    XLA_L.AE_LINE_NUM Line
    FROM xla.xla_ae_lines XLA_L,
    xla.xla_ae_headers xla_h,
    xla_gl_ledgers_v gl ,
    xla_lookups lk5 ,
    xla_lookups lk7,
    xla.xla_events xla_e ,
    xla.xla_event_types_tl et ,
    xla.xla_event_classes_tl ec ,
    xla.xla_transaction_entities te,
    gl_budget_versions bud ,
    --gl_import_references ir,
    xla.xla_subledgers xs
    --gl_je_lines gl_l
    where
    --ir.gl_sl_link_id=XLA_L.gl_sl_link_id
    --and ir.gl_sl_link_table=XLA_L.gl_sl_link_table
    --and gl.ledger_id       = xla_h.ledger_id
    --AND
    xla_h.ae_header_id = xla_l.ae_header_id
    AND xla_h.application_id = xla_l.application_id
    AND lk7.lookup_code(+) = xla_l.accounting_class_code
    AND lk7.lookup_type(+) = 'XLA_ACCOUNTING_CLASS'
    AND xla_e.event_id = xla_h.event_id
    AND xla_e.application_id = xla_h.application_id
    AND xs.application_id =xla_h.application_id
    AND te.entity_id =xla_h.entity_id
    AND te.application_id =xla_l.application_id --xla_h.application_id
    AND ec.application_id = et.application_id
    AND ec.entity_code = et.entity_code
    AND ec.event_class_code = et.event_class_code
    AND ec.language = USERENV('LANG')
    AND et.application_id = xla_h.application_id
    AND et.event_type_code = xla_h.event_type_code
    AND et.language = USERENV('LANG')
    AND lk5.lookup_code = NVL(xla_h.funds_status_code, 'REQUIRED')
    AND lk5.lookup_type = 'XLA_FUNDS_STATUS'
    AND bud.budget_version_id(+) = xla_h.budget_version_id
    and xs.je_source_name != 'Cost Management'
    and (xla_l.gl_sl_link_id,xla_l.gl_sl_link_table) in (select ir.gl_sl_link_id, ir.gl_sl_link_table from
    gl_import_references ir,
    gl_je_lines gl_l
    where ir.je_header_id = gl_l.je_header_id
    and gl_l.je_line_num=ir.je_line_num
    and gl_l.period_name =NVL(:1,gl_l.period_name)
    and gl_l.code_combination_id =:2)
    UNION
    SELECT
    lines.code_combination_id LINE_CODE_COMBINATION_ID,
    lr.target_ledger_name LEDGER_NAME,
    fnd_flex_ext.get_segs('SQLGL', 'GL#', b.chart_of_accounts_id, lines.code_combination_id) ACCOUNT,
    xla_oa_functions_pkg.get_ccid_description (b.chart_of_accounts_id, lines.code_combination_id) account_description,
    h.date_created,
    null,
    null,
    null,
    null,
    null,
    null,
    h.ledger_id LEDGER_ID,
    lines.entered_dr LINE_ENTERED_DR,
    lines.entered_cr LINE_ENTERED_CR,
    lines.ledger_id LINE_LEDGER_ID,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    null,
    lines.description LINE_DESCRIPTION,
    null FLEET_NUMBER,
    null Vendor_Name,
    h.je_source JournalSource,
    h.je_category JournalCategory,
    lines.JE_LINE_NUM Line
    FROM gl_period_statuses ps,
    gl_je_lines lines,
    gl_je_headers h,
    gl_je_batches b,
    gl_ledger_relationships lr
    WHERE lr.source_ledger_id = lr.target_ledger_id
    --AND lr.target_currency_code = DECODE ( GLR03300_pkg.get_ledger_currency, 'ALL123456789012345', lr.target_currency_code, GLR03300_pkg.get_ledger_currency )
    AND lr.application_id = 101
    AND b.average_journal_flag = 'N'
    AND b.je_batch_id = h.je_batch_id
    AND b.actual_flag = 'A'
    AND h.je_header_id = lines.je_header_id
    AND h.currency_code = DECODE ( GLR03300_PKG.get_entered_currency_code, 'ALL123456789012345', h.currency_code, NULL, h.currency_code, GLR03300_pkg.get_entered_currency_code )
    AND h.ledger_id = lr.source_ledger_id
    AND lines.period_name = ps.period_name
    and lines.period_name = NVL(:3,lines.period_name)
    AND ps.ledger_id = lines.ledger_id
    AND ps.application_id = 101
    AND lines.code_combination_id=:4
    AND h.je_source != 'Cost Management'
    UNION
    SELECT /*+ parallel(xla_l) parallel(xla_h) leading(xla_h) */ gl_l.code_combination_id LINE_CODE_COMBINATION_ID,
    gl.name,
    fnd_flex_ext.get_segs('SQLGL', 'GL#', gl.chart_of_accounts_id, xla_l.code_combination_id) ACCOUNT,
    xla_oa_functions_pkg.get_ccid_description (gl.chart_of_accounts_id, xla_l.code_combination_id) account_description,
    xla_h.accounting_date,--gjh.date_created,
    XLA_L.accounting_class_code,
    NVL(lk7.meaning, xla_l.accounting_class_code) accounting_class,
    null,
    null,
    null,
    null,
    xla_h.ledger_id LEDGER_ID,
    NVL(xla_l.entered_dr,0) LINE_ENTERED_DR,
    NVL(xla_l.entered_cr,0) LINE_ENTERED_CR,
    te.ledger_id trx_ledger_id,
    te.legal_entity_id,
    et.entity_code,
    te.source_id_int_1,
    te.source_id_int_2,
    te.source_id_int_3,
    te.source_id_int_4,
    te.source_id_char_1,
    te.source_id_char_2,
    te.source_id_char_3,
    te.source_id_char_4,
    te.security_id_int_1,
    te.security_id_int_2,
    te.security_id_int_3,
    te.security_id_char_1,
    te.security_id_char_2,
    te.security_id_char_3,
    te.valuation_method,
    xla_h.application_id,
    xs.drilldown_procedure_name,
    GL_CUSTOM_DRILL_DOWN.get_trx_description(te.source_id_int_1,et.entity_code) description,-- gl_l.description LINE_DESCRIPTION,
    cii.instance_number FLEET_NUMBER,
    (select a.vendor_name
    from RCV_VRC_TXS_VENDINT_V a
    where a.wip_entity_id = mmt.TRANSACTION_SOURCE_ID
    AND a.organization_id = mmt.organization_id
    and a.item_id = mmt.inventory_item_id) Vendor_Name,
    xs.je_source_name JournalSource,
    xla_h.je_category_name JournalCategory,
    gl_l.JE_LINE_NUM Line
    FROM xla.xla_ae_lines XLA_L,
    xla.xla_ae_headers xla_h,
    xla_gl_ledgers_v gl ,
    xla_lookups lk5,
    xla_lookups lk7,
    xla.xla_events xla_e ,
    xla.xla_event_types_tl et,
    xla.xla_event_classes_tl ec,
    xla.xla_transaction_entities te,
    gl_budget_versions bud,
    gl_import_references ir,
    xla.xla_subledgers xs,
    gl_je_lines gl_l,
    mtl_transaction_accounts mta,
    XLA_TRANSACTION_ENTITIES_upg xte,
    xla_distribution_links xdl,
    mtl_material_transactions mmt,
    WIP_ENTITIES WIE,
    WIP_DISCRETE_JOBS WDJ,
    csi_item_instances CII
    where
    ir.gl_sl_link_id=XLA_L.gl_sl_link_id
    and ir.je_header_id = gl_l.je_header_id
    and gl_l.je_line_num=ir.je_line_num
    and ir.gl_sl_link_table=XLA_L.gl_sl_link_table
    and gl_l.period_name =NVL(:5,gl_l.period_name)
    and gl_l.code_combination_id = :6
    and xla_h.ae_header_id = xla_l.ae_header_id
    AND xla_h.application_id = xla_l.application_id
    AND lk7.lookup_code(+) = xla_l.accounting_class_code
    AND lk7.lookup_type(+) = 'XLA_ACCOUNTING_CLASS'
    AND xla_e.event_id = xla_h.event_id
    AND xla_e.application_id = xla_h.application_id
    AND xs.application_id =xla_h.application_id
    AND te.entity_id =xla_h.entity_id
    AND te.application_id =xla_l.application_id --xla_h.application_id
    AND ec.application_id = et.application_id
    AND ec.entity_code = et.entity_code
    AND ec.event_class_code = et.event_class_code
    AND ec.language = USERENV('LANG')
    AND et.application_id = xla_h.application_id
    AND et.event_type_code = xla_h.event_type_code
    AND et.language = USERENV('LANG')
    AND lk5.lookup_code = NVL(xla_h.funds_status_code, 'REQUIRED')
    AND lk5.lookup_type = 'XLA_FUNDS_STATUS'
    AND bud.budget_version_id(+) = xla_h.budget_version_id
    AND mta.reference_account = gl_l.code_combination_id
    AND mmt.transaction_id = mta.transaction_id
    and mta.transaction_id = xte.source_id_int_1
    AND mta.inventory_item_id =mmt.inventory_item_id
    AND mta.organization_id = mmt.organization_id
    AND mmt.transaction_type_id = 35
    and xte.entity_id = xla_e.entity_id
    and xdl.source_distribution_type = 'MTL_TRANSACTION_ACCOUNTS'
    and xdl.source_distribution_id_num_1 = mta.inv_sub_ledger_id
    and xdl.APPLICATION_ID=707
    and xla_h.ae_header_id = xdl.ae_header_id
    and xdl.ae_header_id = XLA_L.ae_header_id
    and ir.gl_sl_link_table = 'XLAJEL'
    and ir.gl_sl_link_id = XLA_L.gl_sl_link_id
    and gl_l.je_header_id = ir.je_header_id
    and gl_l.je_line_num = ir.je_line_num
    and mmt.TRANSACTION_SOURCE_ID = wie.wip_entity_id
    AND mmt.organization_id = wdj.organization_id
    and wie.wip_entity_id = wdj.wip_entity_id
    and wdj.asset_group_id = cii.inventory_item_id
    and wdj.maintenance_object_id=cii.instance_id
    and xs.je_source_name = 'Cost Management'
    UNION
    SELECT /*+ parallel(XLA_L) parallel(xla_h) leading(xla_h) */ gl_l.code_combination_id LINE_CODE_COMBINATION_ID,
    gl.name,
    fnd_flex_ext.get_segs('SQLGL', 'GL#', gl.chart_of_accounts_id, xla_l.code_combination_id) ACCOUNT,
    xla_oa_functions_pkg.get_ccid_description (gl.chart_of_accounts_id, xla_l.code_combination_id) account_description,
    xla_h.accounting_date,--gjh.date_created,
    XLA_L.accounting_class_code,
    NVL(lk7.meaning, xla_l.accounting_class_code) accounting_class,
    null,
    null,
    null,
    null,
    xla_h.ledger_id LEDGER_ID,
    NVL(xla_l.entered_dr,0) LINE_ENTERED_DR,
    NVL(xla_l.entered_cr,0) LINE_ENTERED_CR,
    te.ledger_id trx_ledger_id,
    te.legal_entity_id,
    et.entity_code,
    te.source_id_int_1,
    te.source_id_int_2,
    te.source_id_int_3,
    te.source_id_int_4,
    te.source_id_char_1,
    te.source_id_char_2,
    te.source_id_char_3,
    te.source_id_char_4,
    te.security_id_int_1,
    te.security_id_int_2,
    te.security_id_int_3,
    te.security_id_char_1,
    te.security_id_char_2,
    te.security_id_char_3,
    te.valuation_method,
    xla_h.application_id,
    xs.drilldown_procedure_name,
    GL_CUSTOM_DRILL_DOWN.get_trx_description(te.source_id_int_1,et.entity_code) description,-- gl_l.description LINE_DESCRIPTION,
    cii.instance_number FLEET_NUMBER,
    (select a.vendor_name
    from RCV_VRC_TXS_VENDINT_V a
    where a.wip_entity_id = wta.wip_entity_id
    AND a.organization_id = wta.organization_id
    and a.item_id = cii.inventory_item_id) Vendor_Name,
    xs.je_source_name JournalSource,
    xla_h.je_category_name JournalCategory,
    gl_l.JE_LINE_NUM Line
    FROM xla.xla_ae_lines XLA_L,
    xla.xla_ae_headers xla_h,
    xla_gl_ledgers_v gl ,
    xla_lookups lk5,
    xla_lookups lk7,
    xla.xla_events xla_e ,
    xla.xla_event_types_tl et,
    xla.xla_event_classes_tl ec,
    xla.xla_transaction_entities te,
    gl_budget_versions bud,
    gl_import_references ir,
    xla.xla_subledgers xs,
    gl_je_lines gl_l,
    wip_transaction_accounts wta,
    XLA_TRANSACTION_ENTITIES_upg xte,
    xla_distribution_links xdl,
    -- mtl_material_transactions mmt,
    WIP_ENTITIES WIE,
    WIP_DISCRETE_JOBS WDJ,
    csi_item_instances CII
    where
    ir.gl_sl_link_table=XLA_L.gl_sl_link_table
    and gl_l.period_name =NVL(:7,gl_l.period_name)
    and gl_l.code_combination_id = :8
    and xla_h.ae_header_id = xla_l.ae_header_id
    AND xla_h.application_id = xla_l.application_id
    AND lk7.lookup_code(+) = xla_l.accounting_class_code
    AND lk7.lookup_type(+) = 'XLA_ACCOUNTING_CLASS'
    AND xla_e.event_id = xla_h.event_id
    AND xla_e.application_id = xla_h.application_id
    AND xs.application_id =xla_h.application_id
    AND te.entity_id =xla_h.entity_id
    AND te.application_id =xla_l.application_id --xla_h.application_id
    AND ec.application_id = et.application_id
    AND ec.entity_code = et.entity_code
    AND ec.event_class_code = et.event_class_code
    AND ec.language = USERENV('LANG')
    AND et.application_id = xla_h.application_id
    AND et.event_type_code = xla_h.event_type_code
    AND et.language = USERENV('LANG')
    AND lk5.lookup_code = NVL(xla_h.funds_status_code, 'REQUIRED')
    AND lk5.lookup_type = 'XLA_FUNDS_STATUS'
    AND bud.budget_version_id(+) = xla_h.budget_version_id
    AND wta.reference_account = gl_l.code_combination_id
    and wta.transaction_id = xte.source_id_int_1(+)
    and xte.entity_id = xla_e.entity_id
    and xdl.source_distribution_type = 'WIP_TRANSACTION_ACCOUNTS'
    and xdl.source_distribution_id_num_1 = wta.wip_sub_ledger_id(+)
    and xdl.APPLICATION_ID=707
    and xla_h.ae_header_id = xdl.ae_header_id
    and xdl.ae_header_id = XLA_L.ae_header_id
    and ir.gl_sl_link_table = 'XLAJEL'
    and ir.gl_sl_link_id = XLA_L.gl_sl_link_id
    and gl_l.je_header_id = ir.je_header_id
    and gl_l.je_line_num = ir.je_line_num
    and wie.wip_entity_id = wta.wip_entity_id
    AND wta.organization_id = wdj.organization_id
    and wie.wip_entity_id = wdj.wip_entity_id
    and wdj.asset_group_id = cii.inventory_item_id
    and wdj.maintenance_object_id=cii.instance_id
    and xs.je_source_name = 'Cost Management'
    Please help me in tuning the above query.
    Thanks
    Raghava

  • Updates not installing/taking way too long.

    Hey everyone.
    So i just got my first iMac and of course as expected it asked me to download and update my computer OS and apps
    So i downloaded them and it asked me to restart to install so i clicked yes.
    then it goes to the blue screen with the loading bar that says "installing 6 updates" or whatever
    of course...it's probably at about...3% judging by the loading bar...and it's been that way for about 5 hours.
    i've tried this twice and both times its done the same thing.
    Can i safely assume that this is not normal?
    or do i just need to be patient and leave it overnight? (since this is the very first update i've had on the computer)

    Welcome to the Apple boards.
    No, it's not normal. Something is amiss.
    Usually when I get several updates at once, I install them one at a time.
    See if you can boot up in the safe mode (hold shift down on boot) and cancel the updates. Check your Login Items (Preferences->Users) and remove them if they are there.
    Someone else might know how to abort them if that's not how Apple does it.
    Then just do one at a time.
    Most updates, after downloading, take a few minutes in the Leopard GUI and a few more during reboot. Never more than 7 minutes, at least for me, and that included 10.5.1.

  • Background Job RSPPFPROCESS Taking too long to execute.

    Hi Gurus,
    I'm working with SAP CRM 2007 - Interaction Centre
    We have configured first response date and to do by date in item category.
    If agent fails to response within the first response date or if agent fails to complete
    to close the ticket within the to do by date,An action is configured to trigger and an
    escalation email(Smart Form) is sent to agent`s manager inbox.
    We have scheduled background job for the program RSPPFPROCESS with variant in background
    to trigger this actions( It is scheduled 4 times in a day ).
    Previously this job used to take 6 hours to complete execution.
    But now its taking 12 hours to complete the execution and there is no change in the
    variant.
    Can anyone please advice me reason for this behavior.
    Kind Regards,
    Vinod

    Hi Manfred,
    We are experiencing similar performance issue when running the RSPPFPROCESS  Job. We opened a OSS message for quite some time but didn't get any useful help from SAP.
    Can you please provide more information regarding your ZRSPPFPROCESS program on identifying the crtical performance steps to resolve the performance issue? We are also thinking of archiving  the record in table PPFTTRIGG , we have over 73+ millions records in the table but there is no archiving object for PPF actions. We would like to focus on reducing the number of entries in the table PPFTTRIGG hopefully to improve the performance. Any thoughts on it?
    Thanks in advance for your kind help!
    Best Regards,
    Madeline

Maybe you are looking for