An unique tax distribution line in one AP invoice in R12

Dear my friends,
Could you tell me if it is possible to generate only one unique summarized tax distribution line for all item-type lines in AP invoice in R12?
Now, we found, after calculating tax, the system generate tax distribution lines for item-type lines one by one.
Thank you in advantage.
Best regards,
Ning

Hi Ning:
Please check if 'enforce tax from reference doc' flag at the configuration owner tax options is checked. If this flag is checked, the tax would always be enforced from the PO, and overrides will not be considered.
Uncheck this flag and try overriding tax lines after matching.
Hope this helps !!
Tarun

Similar Messages

  • Override calculated tax distribution account in PO-matched R12 AP invoice

    Hi my friends,
    Can you tell me whether it is possible to override the calculated tax distribution account in PO-matched AP invoice in R12 version? Is there any options to control it?
    We found we can override the calculated tax distribution account in normal AP invoice in R12. But we can't do that for PO-matched AP invoice in R12, while we can do that in 11i.
    Thank you in advantage.
    Best regards,
    Ning

    Hi Ning:
    Please check if 'enforce tax from reference doc' flag at the configuration owner tax options is checked. If this flag is checked, the tax would always be enforced from the PO, and overrides will not be considered.
    Uncheck this flag and try overriding tax lines after matching.
    Hope this helps !!
    Tarun

  • SAP - Vertex Tax Distribution / Not Invoice?

    Hello, when we are processing certain sales orders, Vertex is interpreting these as Tax Distribution business transaction, rather than Invoice transactions. When we invoice single line item orders, we get an Invoice business transaction type. However, on multi line orders we get a Tax Distribution type. These are custom order types for taxable orders. Based on the Vertex install guides, it looks like SAP is calling RFC_UPDATE_TAXES_DOC for the Invoice schema, however it looks like SAP is calling RFC_FORCE_TAXES_DOC for the Tax Distribution Schema. Any reason why the "FORCE_TAXES" RFC would be called? Thanks for any insights...

    Paul,
    I read your problem and most likely there is addtional configuration that may need to change depending on the details of your SAP and Vertex deployment.  You can reach me at Vertex to discuss this issue.  Some addtional details about which version of SAP, which product and version from Vertex, how it is deployed, etc will be some of the items we can discuss.  As an example, this could be a memory issue and you need to enable more listeners....sometimes this happens when the RFC gateway can't keep with the responses from the external system.  Kevin Toner

  • Invoice Distribution Line is Reversed and Manually Changed Invoice Amount

    Dear Members,
    I Created Invoice and Run Create Accounting. Later, I reversed Invoice distribution Line and manually Changed Invoice Header Amount. I Run Create Accounting. Reversed Distribution Line is Transfered to GL but Liability account is not balancing because i manually Changed to Zero.
    Is there any way
    Thanks

    Hi,
    You be not able to do any change in the invoice which has already been accounted and above all paid. Even then if you want to correct the effect in your books you can make a same reversal entry of wrong line and make a fresh entry with right expenditure type.

  • Issue In Distribution Line

    Hi All,
    We are currently using 12.0.4 to migrate to 12.1.3. we have facing one issue in distribution line I am not able to select Withhold Tax Group because Withholding Tax Group column is freeze. Even I enable Withholding Tax Group on my supplier.
    Regards,
    Yasir

    Hi,
    Below are the reasons for this issue.
    1. Did you enable Use Withholding Tax in Pay in Payable option under the withholding tax tab.
    2. And also enable Allow withholding Tax option in supplier site.
    Regards,
    Raju.

  • MHKIM:AP invoice distribution line에 대한 adjustment조건

    Invoice Distribution Adjustment Chart
    (AP User Guide P. 4-318)
    General Restrictions
    You cannot update, reverse, or delete a distribution if:
    ==> Invoice Distribution line에 대한 update, reverse 또는 delete를 할 수 없는 조건은 다음과 같습니다.
    * The invoice has been cancelled.
    * The invoice has been paid or partially paid and the Allow
    Adjustments to Paid Invoices Payables option is disabled.
    * The distribution is on a Prepayment type invoice and the
    distribution has been applied.
    * The distribution is type Prepayment or Tax related to this
    prepayment. For Prepayment type distributions, the only field
    that is updatable is Description. You cannot reverse or delete a
    Prepayment distribution, but you can unapply it.
    * The distribution has been encumbered.
    * The invoice is an interest invoice and the payment that paid it
    has been accounted.
    * Automatic Offsets is enabled, the invoice contains distributions
    charged to more than one balancing segment, and the invoice is
    paid or partially paid and accounted.
    * The invoice is an Adjustment or PO Price Adjustment invoice.
    You cannot delete a distribution if:
    ==> Invoice Distribution line을 삭제할 수 없는 경우는 다음과 같이 line이 validation된 경우 입니다.
    * The distribution has been validated.
    즉, 위의 경우가 아니라면, Invoice distribution line에 대한 삭제가 가능합니다.

  • How to put schedule lines for one year  in a schedule line agreement

    dear all
    thanks for the support till now from the forum
    now i need some seetings by which the scheduling agreement will autoumatically take the schedule line for one year automatically
    in my client we are getting open PO so
    we have to make one agreement acording to that PO and thats for one year
    and this one yr will have same quantity to be produced everyday
    means 12nos of material every day for 12 month and this will be for every day
    and as per that it should generate a sales order.i need to put schedule line automatically not mannually one by one for each date.so wat is the settingand how to reffer this scheduling agreement we can produce sales order.
    please help
    subrat
    Message was edited by:
            subrat panda

    Dear Subrat,
    you cannot create a yearly schedule line in the scheduling agreement. It is not possible due to format restrictions of the date field. But what you can do is the follows (it is the modification, but it should work with the help of user-exits):
    1. You can split the year schedule line to the monthly schedule lines. There are two ways to do it. If you apply the DELINS IDOC, then you can do it already during transfer of the data to the application (itr is the best way). Here you can use, for example, user-exit USEREXIT_ZUORDNEN_IDOCS (include LVED4FZZ) or customer function EXIT_SAPLVED4_002, called from the subroutine USEREXIT_DYNPRO (Include LVED4F0U). Alternatively, you can use the user-exit USEREXIT_MOVE_FIELD_TO_VBEP (Include MV45AFZZ) within the call transaction, then it will work also in the dialog case.
    2. After getting the monthly schedule lines, you can create a planning delivery schedule, where you can split mothly schedule lines automatically to daily schedule lines according to the customer factory calender.The settings for generation of planning delivery schedules can be found under:
    Customizing SPRO: Sales and Distribution => Sales => Sales Documents => Scheduling Agreements with Delivery schedules => Maintain Planning Delivery Sched. Instruct./Splitting Rules
    It is the only ways, how you can reach your aim. I hope, this information will help you further.
    Kind Regards,
    Akmal Vakhidov
    Development Support SD, SAP, Walldorf/Germany

  • Withholding Tax by Line Item (not by vendor)

    Hi,
    Thereu2019s been more than 1 occasion where clients request for withholding tax at line items (purchase equipment and service in 1 invoice. Equipment no withholding tax but service has withholding tax).  However, as far as I know, the withholding tax is applicable by vendor and not by line item of the vendor. Is there any workaround on this?
    Regards,
    Cheah

    If i understand correctly, you have prepared PO for material plus service, service attracts WHT
    you could prepare two different vendors - one for material, one for service - even though the vendor is same, and maintain WHT only in service vendor.
    under PO there is condition types for service, there you can enter this second vendor who is providing service.
    i think this way you issue should get resolved.
    Pl share how to finally got thru it.
    Thanks
    Sanjay

  • Payable open interface-Multiple distribution lines

    Hi,
    As i know there is no distribution interface table in R12,there are only AP_INVOICES_INTERFACE and AP_INVOICE_LINES_INTERFACE.When i insert one line for one invoice header,it is creating one distribution line.
    Now my requirment is i want insert multiple distribution lines for invoice line.
    Is it possible?If yes,tell me the way...
    Is there any alternative ways?
    Thanks
    Praveen

    Hi Praveen
    How are you inserting the records into Interface Table ?
    Is it through SQL LOADER or a simple Insert Command from a PL/SQL Block ?
    While loading Multiple Distribution Lines for a Invoice Header in AP_INVOICES_LINES_INTERFACE Table we can pass the same HEADER_ID for Multiple Invoice Lines.
    Ex
    BEGIN
    INSERT INTO AP_INVOICES_INTERFACE(INVOICE_ID,INVOICE_NUM)VALUES(100,100);
    INSERT INTO AP_INVOICE_LINES_INTERFACE(INVOICE_ID,INVOICE_LINE_ID,LINE_NUMBER)VALUES(100,100,1);
    INSERT INTO AP_INVOICE_LINES_INTERFACE(INVOICE_ID,INVOICE_LINE_ID,LINE_NUMBER)VALUES(100,101,2);
    COMMIT;
    END;
    Please do let me know if you face any problems.
    Regards
    Nakul.V

  • Multiple distribution lines via Open Interface

    Hello,
    I insert some lines in the AP open interface to create invoice, but the problem is, the import program creates for each invoice line one distribution line.
    But my requirement is to create one invoice line with many distribution lines.
    Anyone has an idea to do this.
    Thanks in advance,

    You could create DISTRIBUTION_SETS that meet your requirements , and than set these DISTRIBUTION_SETS in AP_INVOICE_LINES_INTERFACE interface table.
    Br, Andrei.

  • Show the PO and Invoice Number along with Distribution Line Info

    Does any one have some code that can show the PO and Invoice number along with the distribution line detail?
    I'm tring to get to the po.po_vendors for segment1 and po.po_distributions_all but it screws up at the po.po_lines_all table which needs outer joins and it's just not working for me.

    In case Invoice Distribution is matched to a Purchase Order then
    ap_invoice_distributions_all.PO_DISTRIBUTION_ID and ap_invoice_distributions_all.DIST_CODE_COMBINATION_ID is the link to po_distributions_all table
    Hope this help
    Ashish

  • [Goods Receipt PO - Rows - Tax Code][line: 1]

    Dear All,
            At the time of opening GRPO and Delivery Document suddenly system giving one error Number was used up in this sequence [Message 80071-20]
            And after it I entering required data in GRPO with any tax code then system giving new error [Goods Receipt PO - Rows - Tax Code][line: 1] , 'Internal error (-5) occurred'  [Message 131-183]
            I had verified that tax code which is selected in above GRPO is correct.
            When I try to Add GRPO without Tax code then different error coming Internal error (-5) occurred  [Message 131-183]
    Thanks,
    Siddique Shaikh

    Dear Gordon,
             Thanks for reply, I had setup the different sequence for all documents separately, But currently user using manual numbering option in Delivery and A/R Invoice Documents
             I checked new think is that system giving me same error only when we opening form which is creating financial JE in Backhand, Means when I opening Purchase Order or Sales Order form then system not giving any error and we can save PO or SO
            System is not allowing anybody to add any document which create financial effect.
    Thanks,
    Siddique.

  • Central Contract Distribution - line items creates many contract in the BE

    Hi SRM Gurus,
    We are in SRM 7 ECC 6 Ehp 4 PPS.  Ext Classic.
    First of all, CCTR - Central Contract can't be distributed as per SAP for PPS impl. 
    But we have a workaround. 
    We made snote 1354971 read with 1423994 implemented. Made the process work.
    Means Assign distribution on the item level was enabled and Distribution reached BE.
    But when we have multiple line items in the Central Contract, and we assign distribution, it creates one contract per line item in the Backend which is really absurd.  Which means if you have 100 line items, its creating 100 contracts.  When we do the call-off against this central contract, we have multiple contracts.
    Gurus, Can you guys throw some light on this entire issue.
    with regards,
    Freemind

    We are having nearly exactly your scenario and CCTR works fine with 1 distributed contract containing multiple items. Check if all the items are distributed to the same purchasing org and location. If all is the same, debug BBP_PD_CTR_TRANSFER with your SRM contract GUID to see when and how multiple contracts get created in ECC.

  • Error in external tax system: Line: 0##### - Unknown tax calculation (MIRO)

    Hi Friends,
    We have an issue while doing the MIRO
    Scenario : - Company code in USD Currency, we have a purchase order in EUR currency which had GR and IR in EUR only last year..this year when we are trying to process IR ( MIRO) for residual amount in EUR currency got the error
    "Error in external tax system: Line: 0##### - Unknown tax calculation"
    Even when we are trying to post foreign currency invoice from F-43 got the same issue...
    Taxware guys said no issues from their side
    Is there any year end impact this error ?
    Thanks for you help
    TKP

    Hi Ravi,
    I have verified this one also.no issue there
    Issue :-  When Trying to post Invoices in Foreign currency with Tax I0/A0 ( Exempt tax codes) there we are getting that error
    "Error in external tax system: Line: 0 - Unknown tax calculation error
    This is process was worked till last year Dec 2011 but not working on FY 2012... the same scenario working in Dev client but not in PRD and Test systems..
    The same tax codes can work for local currency postings but not foreign currency ..other tax codes are working for the both currencies in all systems...
    Let me share your idea's
    Thanks
    TKP

  • Receiving Transaction Processor fails with multiple distribution lines

    Hi All,
        I am having a problem with 'Receiving Transaction Processor' when receiving is done against a multiple distributions line that has different project, task data.  The concurrent program 'Receiving Transaction Processor' completes normally but when you check the quantity_received in po_line_locations_all table it shows partial quantity received.
    example:
    PO# Test_PO1
    Line#1, Shipment#10001, Dist#101, Quantity Ordered: 1, Amount $1000 (Dollar based line), Project_ID: 335803, Task_ID: 12057618
    Line#2, Shipment#20001, Dist#101, Quantity Ordered: 3, Amount $750, Unit Price: $250, Project_ID: 335803, Task_ID: 12057618
    Line#2, Shipment#20001, Dist#102, Quantity Ordered: 2, Amount $500, Unit Price: $250, Project_ID: 336488, Task_ID: 12121488
    Receiving performed using 'Receiving Transaction Processor' by populating data in RCV_Transactions_Interface and RCV_Headers_Interface tables and it gave following error for one of the distribution
    from po_interface_errors table.
    Line#1, Shipment#10001, Dist#101, Received Amount $400 (Successfully interfaced)
    Line#2, Shipment#20001, Dist#101, Quantity Received: 1 (Successfully interfaced)
    Line#2, Shipment#20001, Dist#102, Quantity Received: 1 (Failed with below error)
    Error_Message: Error: The PROJECT_ID specified is invalid.  The value specified (336804) does not match the expected value (335803).
    Interface_Type: RCV-856
    Error_Message_Name: RCV_INVALID_ROI_VALUE
    Table Name: RCV_HEADERS_INTERFACE
    Note: This happens only when you have different project_id and task_id values on each distribution for Line#2, Shipment#20001
    Please let me know if someone have already came across this issue or if there is already any patch for this issue.
    Any help with this issue is appreciated.
    Thanks,
    Sri

    Hi,
    Probably, if you put this under SCM - Discrete Manufacturing, your question could solicit more replies..
    Rgds,
    Rakesh

Maybe you are looking for