And the problem is???

Hi there,
  1000 apologies if this has been covered somewhere, but I couldn't find anything.
I recently made an upgrade that included:
KT4V motherboard
Athalon 2100+ XP processor
1x 512mb stick PC2700 333mhz DDR
Ati Radeon 9500 AGP video card
The problem is that I have been unable to get the system to enter Windows when set to the proper speed.  If I set the FSB to 133mhz and the multiplier to either 12.5/13 or auto, both Windows 98 SE and XP (tried separately, formatting between installations) will hang at the 'splash' screen.  The only time it will make it into windows is if I default it to the 100mhz bus and auto multiplier.
I've tried the following remedies to suggested problems:
  1.  HEAT -   The cpu temperature listed in bios and PC Alert 4 were at 70-75 degrees.  I got a big honking ThermalTake Volcano 7+ and a case with some extra fans which brought the temperature down to a respectable 50-55 degrees.  The problem persists
2.  SOFTWARE/FIRMWARE  - I've downloaded all the latest service packs, fixes, etc for the os, updated my video drivers, flashed the bios to version 1.6, updated the VIA 4 in 1 drivers, etc, etc.  Basically, the latest version of everything is on here.  The problem persists
3.  INSUFFICIENT POWER  - I took out the standard 300W powersupply and replaced it with a 350W Enermax.  The problem persists
I know that the board previously had a problem with the Radeon 8500, but everyone including Ati, seems to be ignoring the 9500.  Could this be the problem?  Or perhaps the ram, while supported by the motherboard, being faster than the processor's bus speed?
Thanks.

Quote
Originally posted by maesus
You don't have to apply to entire heatsink, the only place you'd need is the contact between the core and the heatsink. So application on the CPU core itself is enough. Sorry if I gave you any misleading information.
What heatsink is that? Did you place it correctly and not the other way around?
Have you tried with the latest BIOS 1.7?
I originally had the stock Amd fan/heatsink and replaced it with a Thermaltake Volcano 7+.
Should I take some grease off the non-contacted parts of the heatsink and transfer it to the core?
I haven't tried the 1.7 bios yet.

Similar Messages

  • I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

    Question
    I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
    '''(in English)'''

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

    i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
    When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
    Please HELP!!!!!! Getting second thoughts on Lion!!!!

    Hi b,
    Have you restarted yet?

  • How do I fix my ipod classic that says very low batter after I have charged it and the problem persists?

    I have an Ipod video 30g that says Please wait very low battery. I charged it for about a day and the problem persists. I've tried using some solutions on the internet and none of them worked including: holding the menu and select, holding select and play to put it in disk mode with no avail. Is there anyone who can help me!!!

    Have you read this post written by another forum member?
    The Sad iPod icon.
    However, as your iPod was purchased on Boxing Day, why not get it serviced under the warranty?
    You can arrange online service here.
    Service request.
    Or if an Apple store is near you, take it there and have them check your iPod.
    You can make an appointment by using this link.
    Genius Bar Appointments.

  • It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, w

    It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!

    Hi Vmanfromusa!
    It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • I mean that i phone take time to open apps ,contact ,etc why? i close all apps and the problem still?

    i mean that i phone take time to open apps ,contact ,etc why? i close all apps and the problem still?

    Try a reset by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.

  • HT204053 i want to change my icloud id on my iPhone, but it won't let me now that i have upgraded.  I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is

    I want to change my icloud id on my iPhone, but it won't let me now that i have upgraded.  I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is valid.  I cannnot delete the account because "find my iphone" wants the password linked to this old account.  But when i go into the find my iphone app it is using my corect Apple ID.  How do i fix this?

    If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
    If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account.  You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then  on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

  • I have never been able to use the Macmail feature.  Running OSX 10.4.11, and the problems appear to be related to the fact that I originally registered my computer with apple, I subsequently changed my e-mail address.  Have since upgraded the e-mail addre

    I have never been able to use the Macmail feature.  Running OSX 10.4.11, and the problems appear to be related to the fact that when I originally registered my computer with apple, I used an old e-mail address which is now defunct.  Have since upgraded the e-mail address in account manger, but it still locks me out and rejects my user name and password when I try to log in.  It seems it established an account for me automatically when I first fired the beast up, but now the Macmail program is uncooperative with me.  Any assistance would be much appreciated, Thanks

    Hi rbcjoker76, and a warm welcome to the forums!
    Sounds like some needed System Fonts wre replaced by bad ones. Y also have Font Book in Applications for validating fonts & checking for duplicates.
    Required Fonts from 10.3, much the same in 10.4...
    http://support.apple.com/kb/HT2444?viewlocale=en_US
    You may have to get Pacifist...
    http://www.charlessoft.com/
    then intall the Fonts what you need from your Install Disk.
    Or do a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
    http://docs.info.apple.com/article.html?artnum=107120
    Just be sure to select Preserve Users & Settings.

  • I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

    I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
    Here is an image of the issue
    http://www.flickr.com/photos/67839707@N08/8884847081/

    I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
    Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
    Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

  • Hello friends, my itunes has stopped working. and the problem report stated the following: Fault Module Name:     KERNELBASE.dll   Fault Module Version:     6.1.7601.17514.................. please can anybody help me?hello friends, my itunes has stopped w

    Hello everybody> my itunes has stopped working and the problem report stated the following:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    iTunes.exe
      Application Version:    10.5.3.3
      Application Timestamp:    4f14cc3d
      Fault Module Name:    KERNELBASE.dll
      Fault Module Version:    6.1.7601.17514
      Fault Module Timestamp:    4ce7b8f0
      Exception Code:    80000003
      Exception Offset:    0003381b
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    can anybody help me?

    Are you seeing a similar message when launching QuickTime Player?
    What security software is installed on the computer? Have you tried testing in an admin account or after uninstalling tthe security software?
    Use one of the following articles to guide you through removing iTunes and the related QuickTime files.
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Itunes not workin and the problem displays - m signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     10.5.3.3   Application Timestamp:     4f14cc3d   Fault Module Name:     QuickTime.qts_unloaded   Fault Mo

    i tunes not working and the problem its displaying is
      m signature:
      Problem Event Name:    BEX
      Application Name:    iTunes.exe
      Application Version:    10.5.3.3
      Application Timestamp:    4f14cc3d
      Fault Module Name:    QuickTime.qts_unloaded
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    4cf45322
      Exception Offset:    706e1040
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
      please help.

    im having this problem to ive uninstalled and installed but this still comes up!!
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    iTunes.exe
      Application Version:    10.7.0.21
      Application Timestamp:    504d85d9
      Fault Module Name:    StackHash_0a9e
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Offset:    00000000
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    5129
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789

  • I have bought and downloaded the new iphoto but it is not installing. I have restarted my computer and the problem continues. Help!

    I have bought and downloaded the new iphoto but it is not installing. I have restarted my computer and the problem continues. Help!

    can you describe exactly what is happening? And give exact error messages
    LN

  • My Droid 2 has been malfunctioning lately making the phone completely uncontrollable. I have done a hard factory reset and the problem still persists. What else can i try?

    My Droid 2 has been malfunctioning lately making the phone completely uncontrollable. I have done a hard factory reset and the problem still persists. What else can i try?

        We want you to enjoy the best reliability with your Droid 2 Jaxie! What specific problems are you having with the device? Is your software up to date? The latest version available is: 4.5.621.A955.Verizon.en.US. If the software is up to date, we recommend running the device in safe mode to determine if third party apps may be causing the issues. I hope this information is helpful.
    http://bit.ly/IPw5jE
    http://bit.ly/o5McAQ
    Sincerely,
    JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

  • HT1414 I have restored my IPHONE and the problem still continues. No photo is save in camera roll since the new IOS6!

    I have restored my IPHONE and the problem still continues. No photo is save in camera roll since the new IOS6!

    The built in camera app. But all the apps do not allow me to save any photos as well.

  • A few selection of websites after fully loading become blank and start an infinite loop of loading. I reinstalled firefox once already and the problem persists. What can I do?

    A few selection of websites after fully loading become blank and start an infinite loop of loading. I reinstalled firefox once already and the problem persists. What can I do?

    Sorry I do not know what the problem may be. <br />
    If no-one comes up with better ideas of what causes this then my questions and suggestions:
    What do you mean by an infinite loop ? <br />
    The page loads and then goes blank. What exactly happens next, does the page fully load and fully display again before going blank, and repeat this cycle endlessly in the same tab.
    You do say the problem persisted in safe-mode and you had looked at the basic troubleshooting article. Buy that you can stop the problem by disabling javascript.
    * did you disable all plugins - and did you still get the problem then ?
    As you mention disabling javascript stops the problem, have you tried with<br /> Java script enabled but
    * block popups ON
    * load images automatically OFF
    * advanced options - ALL OFF<br /> What happens do you get the problem then or not.
    While on this firefox site if I look at the error console Ctrl+Sift+J or Tools -> Error console If I clear the console content and reload the webpage the error console shows only a couple of messages. YouTube home page give a lot of yellow triangle warnings about 200, but no red warnings, do you get red warnings.
    You could also try on the problem sites eg YouTube changing the permissions with tools -> Page Info | Permissions
    Did you try the Basic Troubeshooting suggestion of making a new profile. (Heeding the warning not to delete settings, otherwise you loose all bookmarks etc) did that help ?

  • Firefox constantly kicks us off of our verizon email unexpectantly and inconsistently. We have downloaded latest version of Firefox, 3.6, and the problem is still there.

    Firefox constantly kicks us off of our verizon email unexpectantly and inconsistently. We have downloaded latest version of Firefox, 3.6, and the problem is still there
    == URL of affected sites ==
    http://us.mg201.mail.yahoo.com/dc/launch?.partner=vz-acs&.gx=0&.rand=8n9ng1ok4dl52

    Please update to the latest Firefox version by going to www.getfirefox.com as you are using Firefox 3.0.19 as you can see in your useragent key: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.0.19) Gecko/2010031422 Firefox/'''3.0.19'''

Maybe you are looking for

  • How to connect a printer to Airport in WIFI with Windows

    Hi, I just would like to know how to connect my printer (Samsung) to my Airport network through WIFI (My computer is working with Windows). Thanks

  • Can't get gmail to work on 4S

    Hi, No matter what I do I cannot set up my gmail account on my 4S (ATT). I've read the gmail threads on Google's website re this issue, and followed what their YouTube clip says to do re 2-Step-Verification for gmail on iPhone's (generates a password

  • ALE experts: please help Error in posting idocs

    Hi All, I am posting an idoc from ECC 5.0 to 3.1 I system thru ALE/Idoc methodology. The partner settings, customer model are set up in ECC 5.0, distributed the customer model and I can see the model in the 3.1I system. The partner settings in the in

  • Total Net Value is picking automatically into one G/l a/c in posting time

    Hi to all, i have one critical issuse , here i am doing  new pricing procedure in that i put 4 condition types 80          ZLLU     Actual user price                                        ERL 850                       Sub Total                     

  • Lost with granting signed applet permissions

    Hi all, My apologies for the cross post, I have incorrectly sent this post to the jre forum but I think it is more specific to the signed aplpet forum.. We need to deploy a very simple applet which sole role is to connect to a domain other than mothe