AniServer Campus Manager problem

Hi I recently ran a Device patch update and ever since I have had major problems with Campus Manager.
I figured it was Aniserver related So i have done the following so far:
1- I reinitialised the ANI Database
2 - I replaced the aniserv.properties with the .orig file.
Still the problems exist even if i managed to get the Aniserver started campus manager data collection would have problems and intermittent error messages when trying to access Campus Manager admin pages.
3 - I decided to upgrade to LMS3.2 SP1
It seemed to be ok with data collection but then when I came in to work today it hadnt run any scheduled aquistions when i went tinto the admin pages I had the error messages again unable to get properties from server.
4 I decided to try a complete restore of the database to a date before the initial device package update.
But I still have problems with the aniserver Failed to run.
Please Help!!
Kind regards Dean
Here is the Ani log
2011/06/23 13:11:10 main ani ERROR ServiceModule: Failed to instantiate com.cisco.nm.ani.server.dfmpoller.NoServiceModule
2011/06/23 13:11:10 main ani MESSAGE DBConnection: Created new Database connection [hashCode = 6164599]
2011/06/23 13:11:12 main ani MESSAGE PartialSMFCommit: Partial Commit is enabled for DataCollection
2011/06/23 13:11:16 main ani ERROR POStore: Exception caught: com.cisco.nm.ani.server.frontend.AniStaticConfigException: AniStaticConfigException: Failed (sql) to verify/construct schema for PO com.cisco.nm.ani.server.topo.PagpPortChannel because: com.sybase.jdbc2.jdbc.SybSQLException: SQL Anywhere Error -116: Table must be empty
2011/06/23 13:11:16 main ani ERROR AniLoadConfiguration: AniStaticConfigException: Failed to construct or verify database

Seems to be working fine now I used the info in the following link to reinitialise the ani.db https://supportforums.cisco.com/thread/2083513
Using this alone did not fix it opt/CSCOpx/bin/perl /opt/CSCOpx/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI
But doing this as well seemed to sort it:
First, set the CiscoWorks Daemon Manager service to Manual, and reboot the server. When the server reboots, delete NMSROOT\databases\ani\ani.log if it exists. Then run:
NMSROOT\objects\db\win32\dbsrv9 -f NMSROOT\databases\ani\ani.db
After that, set the Daemon Manager service back to Automatic, and reboot again
Regards Dean

Similar Messages

Problem With Device Management in Campus Manager

hi , there are 474 devices in common services device managemant which I grouped them to userdefinedgroups .
then I applied the auto allocation mode in Campus manager to apply all managed devices , when I click apply it mentioned that it would add 474 devices . but after data collection was finished just 461 devices was added and the rest of those are now in the Include devices under device management !!!
why does it hapened ?
thank you .

Hi Marian,
Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
Content Activation Log
Log for Setup ID 20100819135323
20100819 135323[ERROR ]: Current Status: ERROR
20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100819 135323[ERROR ]: Prerequisites check failed
20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
Regards,
Rue.

Campus manager user tracking problem

Hi We are using LMS 3.0.1 and the campus manager verson is 5.0.2. We have two subnet which are used for the management ip of switch kept in two different geographical areas. I have made the entry of all devices kept in both subnets and all the devices are know device in DCR, RME and DFM. also after data collection the devices are shown in campus manager database. But I am not able to learn the end host details of the hosts connected to one of our segment.
even if the perticular subnet is not appearing in "campus user tracking" as well as the devices belongs to the subnet. but I am getting all end host details from the second subnet.
please help.

Hi clarke,
i have updated the cm to the latest but still it did not learn. Later i added the 10.188.7.x ip addresses manually in the discovery settings instead of " *.*.*.* " - ip range. Now i am able to see these devices in topology view > layer 2 veiw as connected devices & not seen in unconnected..
Now i need to see the hostname, ip address etc details of these segments in UT acquisition window.... Secondly in topology view, the core switch is showing in "?" question mark symbol. This device is WS-C6509-E (sup-bootdisk:s72033-ipbase-mz.122-33.SXH3a.bin). I tried to delete this device from common services and added it again, there i selected "ws-c6509", i did not see the " ws-c6509-E".
in Cisco site, the serial number of the device is showing as the device "VS-C6509E-S720-10G"
Can u pls help me on this..
regards
rajesh

Data Collection in Campus Manager hung

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
I am running LMS 3.2 and Campus Manager 5.2.1. My data collection in Campus Manger for my devices does not complete and runs indefinitely. It has been hung in the "running" state for the past week and will not complete. I only way I found to get it out of the "running" state is to reset the ANIServer service and reboot the server. I have had this problem since I have upgraded to LMS 3.2. Does anyone have any input of this issue or possible solutions?

The data collection hung again as expected over the weekend. The ANI.log file grew to 1.8 GB again. It is to large for me to open it. I could try to split it up into smaller files. What should be my next course of action?

Error campus managment 5.2.1 - LMS3.2 - Windows 2003

hi,
I update to campus managment to version 5.2.1, and after that restart server and services. in campus managment module I can´t see the "Recently Completed Jobs". The Best Practices and Deviation Discrepancies are in 0, but before upgrade it had not 0.
and when I press in Start Data Collection and Start UT Acquisition i see a popup that said: Error while loading. Campus Manager Server may be down. Please check for Campus Manager Server Status in Common Services -> Server -> Admin -> Processes. If the process is down, restart it. Else try after sometime.
but the services is running!!

The Discrepancies and BPDs are stored in memory in Campus, and re-populated during each Data Collection. It sounds like ANIServer is having problems. Post the output of the pdshow command as well as the ANIServer.log and ani.log.

Campus Manager report - Ports in error Disabled state

Hi,
I have LMS 3.2 and I wonder how Campus Manager collects information from the switch to generate a report of discrepancies, namely a report of "Ports in Error Disabled state"??
I find that I have ports in errDisabled state but Campus Manger doesn´t show this information in "Ports in Error Dissabled state" report. What could be the problem?
Thanks.

Hi,
Campus Manager do snmpwalk on the ciscoErrDisableMIB to get the status of the error disabled ports.
Thanks,
Gaganjeet Singh

Wrong CDP data in Campus Manager

Hi,
we have a LMS 3.2 in a Windows server. In Campus Manager, some CDP neighbours are shown as wrong. In some cases they are shown with their IP address instead of their name (they are added in DCR with their name!!) and in other cases, the neighbour is other device different than the real one.
What is the reason for this behaviour?

Sounds like either a bug, or bad data in the ani database. I haven't seen any topology problems yet in our 3.2 installations, so it could be something in your topology has messed up the database. Make sure all devices have a unique sysName (i.e. hostname+domain name). If not, then you can get similar behavior to what you are describing.

Campus manager not refreshing

Before our upgrade, campus manager, specifically topology services network topology layer 2 map, would auto-refresh when a device went down, or a new device came online... after a data collection of course. now it requires a complete shutdown of the java application topology services, and a completely new instance opened before we can see any changes instead of functioning in real time. what are we missing here?
(it is very possible this is a snmp problem. we are running v3)
Thank you for you help!
-fox

1. Post screen shot of error.
2. What kind of device is it?
3. Is this LMS installation being managed locally or by ACS?

Campus manager 5.0.6 bug

Hello,
I'm hitting bug CSCtd49439 detailed below after i upgraded my campus manager to 5.0.6. the workaround didn't work in my case and i need the patch without opening a tac case, where can I find it???
Regards
Data Collection never completes, and UT acquisition cannot run
Symptom:
Campus Manager Data Collection does not stop. It is reported as always
running in
Topology Services. Additionally, User Tracking acquisition does not run due
to XML files
being written.
Conditions:
This will occur if there are any standalone Access Points being managed by
Campus
Manager. Other devices can also cause this (e.g. old 1200 series switches).
Workaround:
Filter out standalone Access Points and other affected devices from Campus
Data Collection
under Campus Manager > Administration > Data Collection > Exclude Devices.
A patch is available by contacting TAC.

"I understand I have to open a tac case to get it but the problem is that; being Cisco Gold Partners, my company has a limit on the numbers of tac cases to be opened and there are lots of patches and software that is only available through tac? can I unsertand why? IS this a Cisco Policy?"
Yes, it is and this is an old discussion with Cisco and I stopped it sometimes in the past; The only argument for you might be - "it is the same for all Cisco partners...."
It has some aspects, I am not sure if Cisco is aware about..
See this situation:
If you have an issue discussing it here on the forum e.g. with jclarke and it reveals to be a LMS bug and jclarke writes a patch for it, it is clear to open a TAC Service Request to get the patch (the patch is not tested yet and TAC needs to have the possibility to keep at least a statistical logging about the issues).
But know the ridiculous part starts - the case will get accounted against your account because the bug ID yet exists. edit: Only Bug IDs generated during the follow-up of a case won't get accounted. Only if a NEW Bug ID is generated during the follow-up of a Service Request will result in the fact that the SR is not accounted. So beside the fact that you have to deal with parts of LMS which are not working you receicve a kind of penaltiy for helping in making LMS functioning correct....
Once, I stopped informing Cisco about the issues I have found within LMS because of this penalty, but when jclarke started in this forum it was worth again announcing them and discussing those things...- because there is real help and a prospective solution
But I think it is somewhat embarrasing for Cisco to put an imposition on people/companies who found bugs instead of giving somekind of reward or only a short "Thank you...."
Nachricht geändert durch mermel

Unable to run reports in Campus Manager 5.2.2

I'm trying to run reports in Campus Manager and none of them work.
If I try a Best Practices Deviation report I get this error:
"Problem with File /WEB-INF/screens/reports/BestPracticesReportGen.jsp!!!/WEB-INF/screens/reporst/BestPracticesReportGen.jsp(418,66) Attribute value "pophelp('" + helpLink + "');" is quoted with " which must be escaped when used within the value"
If I try a Device Attributes report or a Port Attributes report I get a pop up saying:
"Report not found"
If I try a Discrepancies report I get:
"Error while loading. Campus Manager Server may be down. Please check for Campus Manager Server Stgatus in Common Services -> Server -> Admin -> Process. If the process is down, restart it. Else try after sometime"
And finally, running a VLAN report for any device (and I know they are L2 devices) comes back with:
"Selected devices(s) do not support VLANs"
We're running on Windows 2003. I've taken over supporting this system, so I don't know if it ever worked.
LMS 3.2.1
Campus Manager 5.2.2
CiscoWorks Common Services 3.3.1
Can anyone suggest how I could get to the bottom of this?

Hi Roger - try editing your MDC\tomcat\conf\catalina.properties file and add the following line at the end:
org.apache.jasper.compiler.Parser.STRICT_QUOTE_ESCAPING=false
This tells Tomcat to be flexible with double and single quoting in the CW code and allowed me to run the reports, though I'm still not getting the data I'd expect that's probably another issue.
Hi Ahmad, thanks for your reply. Here's my output too.

LMS 3.2 Campus Manager Topology Issue with C450X-E

We replaced catalysts catOS 6509 by c4503-E and C4506-E in the network.
Since that replacement, 2 links gigaethernet bundled in an etherchannel disappeared from Campus Manager Topology maps (vtp and layer maps).
These links were drawn with 6509 in the old maps but not now with 450X-E.
We have also 235 other switches without any problems.
The links are up and each switch is seeing its neighbour by cdp on each link. No discrepancies found for these links.
I have done a reinit of ANI database by reinitdb.pl -restore and restart a complete discovery and data collection.
The issue is the same.
Campus Manager Version is 5.2.1 with CSCtd49439 installed
CMDeviceUpdate Version is 13.0
C450X-E IOS version is 12.2(53)SG2
In the file "campus\etc\cwsi\portsData.xml" the links do not appear that means they are not discovered.
In Device Center, each switch is seeing the other switch as a neighbour.
Do someone has any idea on that issue ?
Thanks.

Hi,
I have the same problem.
I'm sorry but I'm not used to the TAC and I can't find where I can download the patch.
Can you tell me what is the procedure to get this patch ?
thank in advance
Nicolas

Campus Manager Installation Error

Hi Everyone,
I have issues with my campus manager and it seems that some files has been corrupted, so I uninstall campus manager and re-install it. However, during the installation of campus manager 5.2 I am getting these error message (please see attachment). I already stop daemon manager and other services but I am still getting the same problem. Do you have any suggestion on how to resolve this problem.
Thanks.

if you have let the installation pause in this state, do the following:
open the Task Manager from windows and go to the "Process" tab;
look for any sm_xxxx process (e.g. sm_server.exe, sm_authority) right-click on the process and kill it;
then go back to the installation screen and click on retry; the installation should proceed;

Cisco Unified Operation Manager: can not see the Campus manager

Dear all,
I have installed the CUOM to manage my IPT system. I have successfully installed without any errors. The system now can detect all IPT system components but I have a problem. From the Tool on Service Level View, I only the option for Alert History and can not see the option for Campus manager to customize the topology (like the tool on Ciscoworks LMS).
Please give me some advices.
Thank you,
Thanh

On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

Activate industry extension campus management

Hi,
I activated Campus Management as wrote in 874414 note. I could use campus management transactions, but i can't to reach Campus management in the SAP application menu.
Support package level
SAP BASIS 14
SAP ABA 14
all packages in system are up-to_date. I think that bug is on last SAP packages, because i early installed Campus Management ides and i could see Campus management in the SAP application menu and in my DEV system i activated all like in Campus managemt Ides. Maybe anybody had or saw this problem ?

What version of ERP are you running?
Michael

Ciscoworks: Device not appearing in Campus Manager

Hello,
I have added 3 new devices in CS and then create a group in RME then add the 3 devices in this group. Then I have run the credential check added devices in inventory and backup the configuration successfully.
Problem:
These devices are not appearing in the CM, In can see a new group but when I generate a User Tracking Report in Campus Manager, I am getting a popup saying "no end host found"
Device type are one 3750g-24ts switch and two 2611 routers.
I have restarted the services twice via net stop crmdmgtd; net start crmdmgtd, but no gain.
Please guide me that how I can make the devices appear in CM, there are many other devices already exist in CM. Also we only add devices manually, bot via discovery.
I am using
LMS: 3.2
CM: 5.2.1
RME: 4.3.1

I have run the Data Collection in Campus Manager 3 times but still unable to see the 3 devices in campus manager.
Also it seems that CM is talking with CS as for trial I have deleted 1 switch from CS and it also get deleted in CM & RME
Please advise any other solution.

AniServer Campus Manager problem

Similar Messages

Maybe you are looking for