Apple Remote - Theatrical Trailers??

I use both a white Apple Remote and a new aluminum Apple Remote with my MacBook Pro-13". It is easy to change the battery on the Aluminum Remote; and with a paperclip one opens the white one and it's the same Battery - OK BUT...
...I now see "Theatrical Trailers" as a choice when I choose MOVIES. Is this something that comes via the www to Front Row? How to get these Theatrical Trailers when I am not using Front Row (i.e. via iTunes or only via Apple's web site?)
Thanks! An interesting discovery while I was trying to change batteries in my remotes!
Best regards,
Steve Schulte
Friday 7 January 2011

I'm on 10.6.6 iTunes 10.1.1 also. When I select "iTunes Store" of the left sidebar and the "movies" tab at the top, I see a "Movies quick links" on the right sidebar at the top above "Top Charts". The 7th entry down the links is "Theatrical Trailers".
Hope this helps.
Captfred
Edit: These links look like they download rather than stream. You can pick any of the movies and click the "view trailer" and have them stream though.
Message was edited by: captfred

Similar Messages

Apple TV 2 TERRIBLY slow in streaming Theatrical Trailers

I've owned an Apple TV for 4 years now, and today I upgraded to the new Apple TV 2. I expected the same functionality and, despite of its light weight platform, similar performance.
I'm sorry to say that the Theatrical Trailers functionality is totally useless as it is right now. On my iMac and older Apple TV the playback starts nearly instantly. However, the Apple TV 2 waits annoyingly long before actually starting playback. Even when the progress bar shows that it has buffered for over half a minute or even a full minute of playable content, it just doesn't start playing!
The download speed of my connection is 6mbit, as advertised by my ISP, and the buffering speed is NOT the problem. It's just that the player waits for a lot of data before it decides to start playback. Why? The old ATV doesn't wait and just starts playing after a little buffering, without any hickups. It doesn't make sense to buffer so much.
It's annoying, to say the least, and I'm quite disappointed by the ATV2. My 4 years old ATV is much more responsive in trailer playback.

I'm going to add my comments here. I have the EXACT same problem with the new AppleTV. The very first week I had it, the AppleTV2 would stream trailers, YouTube and movies just fine. I remember downloading a free Fawlty Towers interview with John Cleese, and it played right away. A few months later, I tried the same thing, and it says it will take more than 2 hours to play the 30min video.
I have an LG blu-ray player with YouTube, a AppleTV and my Panasonic plasma with YouTube. All three are wired directly into my DSL modem/router using ethernet cables. I usually get 5Mb downloads on the speed test on my iMac. When I go to a HD YouTube video on the Panasonic HDTV or the LG blu-ray player, the video starts immediately, and plays in full HD with no hiccups or pauses. When I play the EXACT SAME YouTube video on my AppleTV2, I have to wait for a time LONGER than the actual video for it to start playing. SD videos start sooner, but they are still very slow.
It isn't the network, because the very same video will play fine on my iMac over WiFi. And just so you won't question the wifi either, I have also turned off the wifi router (Airport Extreme N), unplugged it, turned off all WiFi devices, and used only wired ethernet for the test. I also tested it with a single device at a time plugged into my DSL modem (vs. all devices plugged in).
Nope, its CLEARLY the Apple TV 2 that's slow. My kids want to see trailers, and they are impossible to see, and youtube is almost as useless. The AppleTV does stream HD from my iMac perfectly fine, but anything from the internet is useless.
Neal

Apple Remote

Since upgrading to Mac OS X Lion 10.7.5 I have been unable to use my Apple Remote to view movie trailers. Does anyone know how I can fix this? Many thanks!

Since I'm a big fan of BT and use BT software and
hardware with all my macs on a daily basis I would
think using a BT remote would hinder all of BT
functions I use on a daily basis considering your mac
can only be paired to ONE piece of BT hardware at a
time. So, if you're using your remote then forget
about using a BT headset, getting caller ID from
calls to your BT phone or using Salling Clicker, for
example.
BT has not progressed to the point (on Macs) where
multiple pairings are possible at one time therefore
having a BT remote would be counterproductive. There
is nothing wrong with IR remotes, and if you really
want a BT remote that will be your only BT device
then go find a cheap BT phone like a Sony Ericsson
T68i and install Salling Clicker (I noticed Salling
started a Front Row thread with links to clicker
scripts for Front Row already here:
http://www.salling.com/forums/viewtopic.php?t=2985).
Consequently, if I can get an answer to whether or
not Front Row will play music from my G5 upstairs
(which has my entire 140GB library) via my home
network then I'm planning on using a left over T68 I
won years ago as a BT remote for a new iMac I'm
planning to buy (only if it will play shared
libraries).
Um. You can pair a BT Mac with more than ONE BT device at a time. RIght now I have my phone, keyboard AND mose all paired at the same time...

Front Row Theatrical Trailers Icons Blank

Hi,
I currently have all the latest released updates (itunes 7, qt update, front row update, etc) released september 12. Everything functions correctly except the preview icons for theatrical trailers.
Prior to todays updates I would see a picture of a DVD cover as the artwork for a trailer. Now I see a rectangle with the QuickTime symbol and a question mark below. The titles of the trailers still show when I move from box to box and the previews start loading normally.
I tried removing my front row property list and the front row cache. I also created a new user and had no luck with that account. I've restarted my machine, disconnected all devices (macbook black) and tried repairing permissions. No luck.
Any help greatly appreciated.
Thanks,
-j

Update: I've just installed again QT 7.1.3 using
Software Update and now the trailers thumbnails look
fine.
I suspect the cause of this problem to be the fact
that I upgraded to 7.1.3 using the QT installer from
apple.com, not the Software Update.
Mine has the problem and I used Software Update first. I tried installing again with no luck.
Where can you get the downgrade to 7.0.1? I may try that.
Dual G5, iMac G5, PowerBook G4, IBook G4, G3, 604e Mac OS X (10.4.7) Mac OS X (10.3.8) Mac OS 9 Mac OS 8

Unable to download Theatrical Trailers.

I just upgraded to iTunes 10.5.1.42. I can download the free songs and videos and I can purchase and download albums.
I am not able to download Theatrical Trailers from the store. The last time I did this was 10/06/11 and I hadn't logged in since then until today.
Anyone else having this issue or know of a fix?

I should also mention that if I go to trailers.apple.com and select a movie trailer then download it just launches iTunes as expected and still cannot download via a click.
However, if I select the trailer and drag and drop it to my movie folder it seems to go to my account without the proper details to identify the trailer.

Why Can't I View Theatrical Trailers?

I have an Apple TV connected via Ethernet to my home network. Everything seems to work fine, with the exception of Theatrical Trailers. When I select that category, I see all the trailers listed along with the movie posters. But when I select a specific movie trailer, the screen goes black for about 15 seconds and I then get the message: "No Content Was Found."
As I say, everything else works fine, including the trailers under the category "Top iTunes Movies." I get the same result whether I'm in the top level Apple TV menu, or on a menu when the Apple TV is linked to my synched computer.
Any help would be much appreciated. Thanks.

Actually you can, but it's a bit tricky.
If you take the URL from the 720p trailer and change '720' to '1080' it works.
Here's the URL to the trailer for Elysium:
http://trailers.apple.com/movies/sony/elysium/elysium-tlr1_720p.mov
Changing 720 to 1080 gives you this link to the FullHD trailer:
http://trailers.apple.com/movies/sony/elysium/elysium-tlr1_1080p.mov
By changing that, you will be able to download the 1080p trailer.

Apple remote changing computer screen

I live in a small apartment, the digital modem for my tv and computer are on one side of the living room, so both computer and tv on same wall. When using Apple remote to peruse through menu on tv, my mac brings up a seperate menu and peruses through as well. I will be watching something on the tv, and for example, a theatrical trailer for a movie will start playing on my computer (very annoying). Is there anyway to block the signal of the Apple TV remote to my mac? I can't seem to figure it out.

Nevermind. I found my answer on Google.

No Apple Remote or Apple Mini-DVI to VGA Adaptor included with new MacBooks

Hi!
I just picked up a new (black) MacBook yesterday from the Apple Retail Store in Meadowhall (Sheffield). I was quite surprised to open the box and find that the Apple Remote and Mini-DVI to VGA adaptor cable are now optional items and no longer included in the package. Okay, they're not expensive (an extra £30.00 to add both of them), but I just thought I'd mention it to let potential customers know.
I have to say that I'm very pleased at the speed bump and the 250GB hard drive though (you can never have too much space). Also good to have 2GB RAM out of the box (rather than paying an extra £90.00 for the 2GB model). Excellent!

bford0001 - 15% restocking fee? Did you buy it from an Apple Retail store? I bought a black MacBook from them just under two weeks ago (a 2.2 with 160GB HD and 2GB RAM) and they let me take it back and walk out of the store without charging me anything!
One other thing I have noticed - why has the L2 cache dropped to 3MB from 4MB? I know the processor is more powerful, but doesn't that mean it would just about level out, because of the reduction? I noticed the same for the £1,299.00 MacBook Pro and that on the other two models, it's gone up to 6MB. Anyone know how this would change the performance?

Is there a way to open the mic using apple remote desktop

Is there a way to open the mircophone channel using Apple Remote Desktop so I can listen on anything thats happening at my computer at home? If not is there another software that would work?
Also is there a way to use apple's software to control and watch a PC?

Is there a way to open the mircophone channel using Apple Remote Desktop so I can listen on anything thats happening at my computer at home? If not is there another software that would work?
You would have to launch software that would accept audio from the microphone and transmit it to you in some fashion. ARD does not transmit audio itself. Another remote control solution such as Timbuktu might transmit audio, so you could look into that, perhaps.
Also is there a way to use apple's software to control and watch a PC?
You can install a VNC server on the PC and ARD can then take control of the system. It can be tricky to find a VNC system that will work with ARD, though, so search this forum for "VNC" for possible options. One of the applications that support Microsoft's remote desktop architecture such as their own Remote Desktop Connection Client for Mac or iTap Mobile RDP will probably work better, though.
Regards.

Multiple Apple Remotes no longer work with Apple TV!

I've been using Apple TVs since the minute Steve Jobs introduced them in 2007. I bought the 2nd and 3rd Generation Apple TVs the minute each of them were introduced. I've been watching every Apple Keynote Address since they were available online or on CDs from the early 1990s, on my HDTV via my latest Apple TV when that was possible. I watch far more TV through my Apple TV than via my Cable Box, much of it music and music videos from iTunes on my 2006 Mac Pro! But as of YESTERDAY I am seriously thinking of getting another, ANY OTHER manufacturer's similar internet streaming box!!!
WHY??? Because YESTERDAY, for no apparent reason except some programmer's or software engineer's stupidity, my Apple TV stopped working with all but ONE of my Apple REMOTES!!!
Why is that stupid? Because, in my household there are three people who use Apple TV all day, and each of them have an aluminum Apple Remote which they all use to control what the Apple TV is streaming. We have two other Apple Remotes lying around in case one of us misplaces his or her Apple Remote, which happens occasionally. ALL FIVE of the Apple Remotes, just like the beige plastic Apple Remotes that they replaced, always worked with all three of my Apple TVs! Then yesterday, suddenly, only the LAST Apple Remote that was paired with this 3rd Generation Apple TV is able to control it.
I've spent HOURS trying to fix this. This wasn't caused by an Automatic Update to the Apple TV's iOS; there has been no update in recent days. I've got Automatic Update turned on, just as I, a good Apple citizen, have my Apple TV set up to automatically send back Usage Data to Apple. I've rebooted my Apple TV. I've put brand new 2032 button batteries into my Apple Remotes. I pulled the power cord out of my Apple TV for 15 seconds and again for five minutes and then restarted it. As per instructions, I have Unpaired and re-Paired each and all of my 5 Apple Remotes. All to no avail. Only the last Apple Remote that was paired with the Apple TV works! Horrible. And STUPID, if it was a deliberate programming decision and it was introduced in a minor automatic update.
Worse, I've been using the Remote app on my 5th Generation iPod touch to replace ONE of the unusable Apple Remotes, and as of a couple of minutes ago even THAT stopped working with my Apple TV! Well, I was able to fix that fairly easily by pairing the iPod touch Remote app with my Mac Pro and then pairing it again with my Apple TV. But I don't think that solution would be so easy for many non-technologically-inclined users. I also don't think that a $200 or $300 iPod touch is a very acceptable replacement for a $20 Apple Remote, especially since everyone buys iPod touches for totally different uses (I use mine primarily for taking notes using voice-activated audio or video -- it is by far the best device for that purpose out there -- police departments should take note).
I'm hoping that this multiple Apple Remote problem somehow resolves itself, unless it is a hardware problem with my Apple TV. If so, I can hold out until Apple's media event next week, which I HOPE will premiere a new 4th Generation Apple TV, hopefully which will once again allow my five Apple Remotes to all control my Apple TV interdependently, without having to Unpair and Pair each one each time you wanted to use it, requiring you to quit whichever Apple TV app you were using each time, or alternatively to use Sneaker-Net to deliver the one working Apple Remote to each person who wants to use it, which can be difficult since at least one of the users is very ill! (Whew! A long sentence. But I hope you get the point.)
Two days ago, I could never have imagined myself getting a Roku or an Amazon, Sony, Microsoft or some other streaming device. It just proves how fast a stupid little decision (if it was deliberate) can turn EVERYTHING around!

People have a misconception with remote pairing (as does the description on this page -> Pairing your Apple Remote with your computer - Apple Support).
The 1st paragraph is incorrect.
The 2nd paragraph is correct.
"If you have several Mac computers or an Apple TV that use the Apple remote, or other devices with integrated infrared ("IR") receivers in one room, you can "pair" your Apple Remote with a specific Apple device so it doesn't interfere with other Apple devices or IR devices nearby.
Pairing allows you to set the receiving Apple device so that only it can be controlled by one remote. Learn how to pair your Apple Remote"
Pairing sets the device to read only a specific remote.
It does not set a specific remote to work only with a specific device. ie. if you point th remote at another Apple device (that is not paired) it will control it.

How do i use my apple remote on my macbook pro

how do i use my apple remote on my macbook pro?

Hi,
System Preferences > Accounts > Your Account
Select current Pic and chose to Change it.
You get an option to take a SnapShot.
Quicktime will also be able to access it and record using Quicktime X in Snow Leopard.
Check the Menu items for New Recording.
MSN for Mac can use it (It depend on version and in some cases whether you are connected to the correct type of Windows server)
Yahoo (This is in Beta 3 and has been for years)
Results can vary.
A Web Browser with the Flash Plug-in active can access the camera on certain Web Sites that run video Chat rooms
See Koowy
(Type anything to Create a Room Name
On the New Page allow access to the camera in the Flash Pop Up - You may need to use the tabs to Select Camera type.
Send Buddy the URL of that page).
Also see Here (Work by EZ Jim)
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:44 PM Saturday; May 7, 2011
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I can't connect to my iTunes library on my Macbook Pro using the Apple Remote app on my iPhone 4S. Why?

Hi all,
I've been looking through the forums for help with this problem. There are a couple of threads with similar problems, but no solved threads and the discussion doesn't seem to go anywhere... As far as I can tell, it's been causing a lot of annoyance for many users, including myself, but it looks like the community's in the dark about why it's happening!
I'm trying to connect to my iTunes library using the Apple Remote app on my new iPhone 4S. As you may know, there are two ways to do this:
Connect via Home Sharing by setting up Home Sharing on both iTunes and the iPhone, or
Connecting directly to iTunes using a four digit passcode.
I've tried both methods, and neither work!
Here's what happens for each method:
From the Remote app start screen, I tap the "Turn on Home Sharing" button. I enter my Apple ID details (which are definitely correct), and get a confirmation message on my phone saying "Home Sharing is on using [my email address]. To control iTunes: Choose Turn On Home Sharing from the Advanced menu in iTunes on your computer." I then go to iTunes, turn on Home Sharing, enter my Apple ID again and get a confirmation message saying "Home Sharing is now on", etc. However, there's no connection formed between my iPhone and my Macbook Pro - the Remote app just shows a message saying "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account [my email address].
From the Remote app start screen, I tap "Add an iTunes Library", and the four digit passcode is shown on my phone. I select the new "Quintin's iPhone" item that appears in the iTunes sidebar under "Devices", and enter the passcode on the screen that appears. Once I've entered it, I get a confirmation message saying "Your Remote is now able to control iTunes" with an "Okay" button. Clicking the "Okay" button makes the screen and the sidebar item disappear completely. On my phone, a message that says "Looking for ..." is shown on the screen with a spinning loading wheel, but nothing happens. After a minute or two, it stops and simply says "Could not find".
After trying both methods, I went through all of the troubleshooting steps here: http://support.apple.com/kb/ts1741 . Absolutely no effect.
I should mention that I was experiencing similar problems on my old iPhone 3Gs with an older version of iTunes. I thought it might have been some kind of hardware fault and expected it to clear up once I got the new phone, but the problem is still there. It's a new phone, a new computer, a newer version an iTunes... even a different network I'm trying to connect to it on. Bizarre!
I've even tried using the Mobile Air Mouse remote application instead. However again, the Mobile Air Mouse app on my phone can't pick up the Mobile Air Mouse server on my Mac.
I'm kind of at the end of my rope here. Anyone?

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

TS1741 Apple remote app on iPad & iPhone cannot find library

I have used the Apple remote app on my ipad in the past, controlling my computer and also my stereo using airport express. I haven't used it in a few months, decided to have another look at it and have run into trouble. I keep getting 'could not find' when I try to add my itunes library.
Itunes can see my iPad, when I try to add the library it pops up in ituned to put the passcode in. My wifi is working fine in the house on both iPad and iPhone. I have deleted and re-added the app, upgraded to the new itunes, restarted computer, tried using the Remote App on my iphone. All the same thing. I've also done everything in the help section for the problem.
Please help, I really need this to work as we are having a big party and was going to use this instead of a juke box.

Try quitting the app and then reset your iPad.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it jiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Unable to pair Apple Remote App with iTunes

I am running a Toshiba Satellite L505D-S5965 with Windows Vista SP 2. My iTunes software is 8.2.1.6, and my iPhone 3GS is running OS 3.0.1 (7A400). Both the Satellite and iPhone are connected to the same WiFi local network, and yet the App "Remote" by Apple Software is unable to communicate with iTunes to allow the entry of the four digit code to establish control of the iTunes library. Shortly after purchasing the iPhone 3GS I purchased the Satellite, but in the couple of weeks between the purchases the Remote App worked fine on my Gateway running Windows XP SP2. I have been through Apple Telephone support twice, and have really run one of the technicians through the mill researching possible solutions. I have visited an Apple Store Genius, who could find no reason for the problem. The iPhone and Remote App worked perfectly well on the store's WiFi and Mac, but his iPhone also wouldn't work with my laptop. I have been through Kaspersky's technical support system to ensure that there isn't a firewall issue. They have assured me, after reviewing logs from my laptop, that this is not the case. I even went so far as to uninstall all my Kaspersky product, but the Apple Remote App still would not function properly. I have updated the router's firmware, and checked that the laptop's wireless card is running the latest driver. At this point I can't think of anything else to try but would really appreciate any suggestions. Thanks, Steve

Monday 7th Jan.
Just to say that Apple did call me this am to discuss the problem on foot of a call I made last week.
In the meantime the remote worked with both a 2007 IMac and a 2009 laptop but not on the m-mini.
When I tried pairing this morning during the call by pressing Menu and next together it paired.
The change is very subtle, it just says paired in the advanced section of the security et sl section as referred before, with a fleeting 2 intersecting rings icon.
The big difference is that Front Row is gone....
The remote only works to a limited degree within some apps such as iTunes and iPhotos.
In theory it controls the volume in iTunes but as of now for me it doesnt....:( need to look more.
As to what the problem was:
It seems there is a set of keyboard combinations that can be used to force a reset the ID of the remote, the suggestion is MAYBE that by getting it to work on the iMac and laptop in some way reset the ID.
This stuff is WAY beyond my skill level:)
I did impress upon Apple the need to look at the issue in threads like this....
Message was edited by: qazxsw52

Apple Remote - Theatrical Trailers??

Similar Messages

Maybe you are looking for