Approval Mix up

Dear Experts,
I have the following occur :-
We have many approval templates each working differently but several of them on approval transfers. On one particular approval the approval gets triggered but with the wrong stage hence gets approved by the wrong person. Because of this I believe the template that gets triggered is wrong as well.
Hence we find that where the approval transfer of stock from warehouse A to Warehouse B triggers an approval the wrong one is sent out. This does not happen always. The approval that gets overrun has a very simple query
SELECT DISTINCT 'TRUE' WHERE $[OWTR.U_code] = 'Y'
What could be causing this behavior ?

Hi,
This query is too simple to avoid error. You may change it as:
SELECT DISTINCT 'TRUE' FROM dbo.OWTR T0 WHERE $[OWTR.U_code\] = 'Y' AND T0.DocNum = $[$11.0.0\]
Thanks,
Gordon

Similar Messages

Why doesn't the quality meter approve of any of my choices of master passwords, no matter how I mix both letters, digits and non-alphanumeric characters?

I tried to create a master password, but it couldn't be done 'cause the quality meter never accepted any of my passwords, even though I used a very complicated mix of letters, digits and special characters as well.

There are no requirements when setting Firefox's master password. The password quality meter is purely informative.
If you're trying to fill the bar all the way, that's unlikely unless you create a lengthy password, or a very complex mix of special characters, digits and lowercase and uppercase letters. Keep in mind the master password should be easily remembered and typed in, time after a time. A highly secure password that is easily mistyped or forgotten is of no use.

Error during approval Process flow in Process controlled workflow

Hello Experts,
We are in SRM 7.0 classic scenario using Process controlled workflow.WE recently connected a new backend R/3 system to our SRM system i.e we now have 2 R/3 backend system connected to SRM system
It is regarding the two new additional account assignment categories that came into picture when we connected the new R/3 backend system to our SRM system, i.e. Asset and Network.
There seems to be some problem with the approval workflow for those SHC, that have such Acc *** Cats.
Please find below my obeservations:
- if you have just one line item in the SHC, and this item is either booked on Asset or on Network, than everything goes fine. After the Acc *** approval, the PR is created in R/3
- if you have SC with a mix between an "old" Acc *** Cat (Cost Centre, WBS and Order) and one of the "new" Acc *** Cats, than the workflow is not working as required --- the manager, that is responsible for the accounting approval of the two positions (e.g Cost Centre and Asset) gets only one work item in his approval overview --- in that work item, the two positions are there, but the Asset one is grayed out --- so, the Manager approves only the Cost Centre positions and than the SC is no longer with the approver --- if you observe the SC now from the requisitioner point of view, the status of the line items in the approval process overview of both(!) lines is "approved", but the overall status of the SC is still "in approval"
Can you all experts plz let us know why this is happening and how this can be resolved?
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

Hi,
What is Resp. Resolver Name and Decision Type in your Process Level Definition? Did you create custom agent BADI implementation?
Regards,
Masa

Approval of Payment Batches

Hello I have a customer running R12.0.4 who wants to do an approval step within the Payment Process. So that when a payment batch is started it can be floated through a workflow for approval (or maybe some non-workflow approval).
I was thinking perhaps we could lock down a particular concurrent request to prevent the ACH/Wire file from being transmitted except by certain users. Any ideas on how to setup the segregation of duties/approval would be great help for us!
Thanks,
Stephen

I believe there is no such workflow, have to come out with a mix of personalization and function security/concurrent request security mechanism.
While creating a payment process request , have to control that the payment instructions etc are not submitted automatically but have to be scheduled.
Scheduling ensures such processes can only be done by a set of users/responsibility.

Approve quote to be ordered based on workflow activity assigned to the user

hi,
how to approve the quote(cart) to be ordered when user clicks place order based on the workflow activity assigned to the user.
regards
yesukannan

Thanks for the quick response.The workflow rule will work only for certain combinations.
I am trying to avoid using different combinations of the word "Convention Center" in the workflow rule since the word convention center could be spelled with mixed cases by the sales people.For example - Convention center or convention Center or CONVENTION center.
I don't want to check for the different combinations of the convention center string in the workflow rule since i need to check for other fields in the opportunity and the expression could get very long.
I am trying to convert the opportunity to upper case and then check for 'CONVENTION CENTER' so that it will handle all the scenarios.
Thanks
Swami

B.Y.O.x , authentication, best practice, mixed OSes

Morning me again.........
I have 2 x 5508 WLCs in place with around 50 APs split between the 2.
As there is currently a low uptake of using wireless devices all of which we own I have up until now been using WPA2 and MAC filtering to control access to the network.
This all needs to change as we are about to embark on the B.Y.O.x revolution. This means being able to support a wide range of OSes from Windows to Android. This in itself presents a whole series of issues but right now I'm trying to explore how much of the burden the WLCs can take.
For instance I was thinking about setting up web auth on the controllers that would authenticate against an external RADIUS server - this seems fairly straight forward.
If this was to be a bog standard windows network I could set up a Microsoft NPS server that could control and define policies to mobile devices, but as this is going to be a mixed environment that's not a solution I can use.
What other features do the controllers provide that would be useful in my situation - can you for instance automatically direct data to a specific vlan based on authentication information?
Mamny thanks.

Well it's hard to say since I don't know what exactly you want to do. If you want to be able to determine what device is in the network and create a policy for that, then you need Cisco ISE. Windows IAS, NPS, Cisco ACS, and other radius will just look at the authentication piece and will have no idea what type if device it is. So if you have iPads that are corporate owned and want to allow that in the network and not allow non corporate iPads for example, you either put a certificate on the iPad and run EAP-TLS or you can use ISE to run EAP-TLS or take a look at the device, profile that device and verify that is has a valid certificate and out that device on vlan X. If the device is not approved, you can put that is the guest vlan.
Sent from Cisco Technical Support iPhone App

Making GL Account field editable during Approval Process

Hi Experts,
We are in SRM 7.0 and using process controlled workflow.
As a business requirent,we want the GL account field to be editable during the approval process i.e during approval process,approve wants to change the GL account in the shopping cart as the GL account may not be correctly entered.
Is it possible to make the GL account field editable during approval process?if Yes,please share how it can be done.
Any pointers will be highly appreciated.
Thanks & Regards,
Rupesh

Hi,
You can find info in help.sap.com.
http://help.sap.com/saphelp_srm70/helpdata/EN/5c/b5a6783fc34466834fbc48def23d2d/frameset.htm
http://help.sap.com/saphelp_srm70/helpdata/EN/01/ad7bc4d66f4bc1a52a0cd21cdfa2ff/frameset.htm
Level Type: There are 3 possible entries. Approval with completion, Approval and Automatic. Within
a completion step the document can be changed by the approver if the u2018Changeableu2019 flag is set.
Within the approval phase, the document can only be approved or rejected but not changed. It is not
possible to mix the two phases of completion and approval. The completion phase is always before
the approval phase. The automatic step is a final means of validating the approval process, and to
verify that at least one step was returned without any error (example: event 0EV999). Depending on
the task ID assigned to the automatic step, the document will then be either approved or rejected.
Regards,
Masa

Discount approval

Hi all,
could you please help me out with the following case:
An account manager agrees upon certain discount agreements with his customer. When the value of these conditions is over $ 20,000 a year he needs approval of his Sales manager. We would like to facilitate this in SAP by letting the system block the discount agreement automatically when the value of the agreement is over $ 20,000. When the Sales manager has approved the agreement the agreement is automatically unblocked. My client wants standard SAP, which means no enhancements/modifications and no SAP workflow.
Is it possible to this with standard SAP? And how? I hope anyone can help me out.
Thank you for your reply!
Kind regards,
Wander Jansen Venneboer
Message was edited by: Wander Jansen Venneboer

Hi Wander!
Nice approach: we want only pure standard, but you have to fulfill ALL our (whatever strange) requirements.
Let's see, what might be done:
There is a possibility to limit condition values to a customized range (e.g. 0-20,000 and 20,001-999,999). Then you can restrict authority for condition maintenance to specific condition types. So you could use small and big discount condition types, where the small ones have a different authority group then the other one.
Of course this leads not to an approval process.
There is also a way to have conditions with a release status 'A - proposed, B - checked, C - active', but I don't know, if here an authorization can be linked.
Maybe a mixed approach (small without release status, big discounts only with release status + procedure) can help in your case.
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/a4/af9e78e69611d2ace10000e8a5bd28/frameset.htm">release procedure</a>
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/93/7432f8546011d1a7020000e829fd11/frameset.htm">condition limits</a>
You will have (more or less) surely condition formulas or requirements - technically they are a modification. A BADI implementation does not need this - maybe here some learning process on customer side will come.
Regards,
Christian

AE: Approvers not getting E-mail reminders to log onto AE and approve

Hi All
We have set-up our email reminders and escalation but the approvers are not getting the e-mail reminders to log onto AE and approve/reject the request. Is there some additional config we need to do.
We set our background jobs for every 60 seconds so if there is a request the approver should get it a minute or two after the request has been logged.
Any assistance will be appreciated.

Hi Rodger,
did you try running the background job "Immediately"?
Do you get any emails then?
If yes, try scheduling more often (enter 1 in the seconds field), at some point SAP has mixed up minutes and seconds (it says 60secs but actually it's 60mins).
If no, are there any requests yet where escalation has already taken place? Or has the time for sending reminders, e.g. 2 days, already passed?
Regards,
Daniela

Podcast Approved.....Then Rejected.

Submitted a Podcast a few days ago. It got approved, then the next morning I got an email saying it was rejected and all my episodes were taken down right away. I didn't really change anything other the just some basic information. What is my best course of action? Try to resubmit it?

It's frustrating that when the Store staff reject a podcast they never actually say why.
Possible reasons include technical problems, failure to update, strong language when the 'explicit' tag is not set to 'yes' (which yours is), copyright violation, racism, and unacceptable content (for example the sort of unpleasant photographs people get arrested for owning - I'm not suggesting you've done this!).
If you feel like publishing your feed URL it may be possible to offer specific comments. Apart from that, a common reason for rejection is people posting 'mixes' of commercially available recordings without clearance.
You should look at your podcast to try to determine if there is a problem, and when you think you have corrected it, submit it anew. There is a bug in the automated process which will tell you that a podcast of that name has already been submitted (which is true but takes no account of its rejection) so you will need to make a small change to the title: you can always change it back when the podcast has been accepted. If you can change the feed filename that may also be a good idea, but depending on how you've created the feed it's not always possible.

Credit Mix Question

Thank you all for being so helpful! Because of your sound advice, my scores have improved almost 40 points since June 19th of this year! Currently, I have an installment loan for my car through a local bank. This is a 60 month loan that will be paid off in August 2016. The interest is very low, about 2%. I'm really worried that my scores are going to drop when the loan closes next year, but I might have an opportunity to extend the loan through December 2016. This is solely to keep a good mix of credit as I build my score in order to purchase a home. Should I jump on this opportunity if it comes through? Or should I take out another type of loan closer to the time the installment loan will be paid off? My current situation: Scores are EQ 631, TU 614, EX 628, and climbing pretty rapidly, though not high enough for approvals on most things just yet. I am keeping my util under 10% and making on-time payments. I currently have Discover It ($1800, just opened), Cap One QS ($750, open since 2013) and Cap One Secure ($200, open since Feb 2015). Cap One will not approve me for a CLI on the QS just yet. Maybe in 6 months. I'll be gardening until Feb 2016, which is when all baddies fall from my report, leaving only 3 late pays on the C1 QS card (1 from 2013 and 2 from 2014). I have under 10 inquiries. I recently applied for Barclay Reward, Amazon store card and BofA Americard and was denied for all (yes, I called for recon-they want to see the baddies fall off my report before approval). BofA approved me a for a secure card offer, but I'm worried about having too many new accounts so I may hold off. I have a 20 year credit history thanks to a card my parents opened for me when I was a kiddo, and I've made on-time payments other than the late pays mentioned above and the very old baddies (there are 5) again due to drop by Feb 2016. Thoughts?

AKO17 wrote:
Thank you all for being so helpful! Because of your sound advice, my scores have improved almost 40 points since June 19th of this year! Currently, I have an installment loan for my car through a local bank. This is a 60 month loan that will be paid off in August 2016. The interest is very low, about 2%. I'm really worried that my scores are going to drop when the loan closes next year, but I might have an opportunity to extend the loan through December 2016. This is solely to keep a good mix of credit as I build my score in order to purchase a home. Should I jump on this opportunity if it comes through? Or should I take out another type of loan closer to the time the installment loan will be paid off? My current situation: I would not extend the auto loan for that reason. Instead, open an account with SDFCU, put 500 in savings and do a 3 year share secured loan. Payments will be $14 and change. Make the first three payments out of pocket, then set it up to auto pay from the savings account. Set this up a few months before the car is paid off. Scores are EQ 631, TU 614, EX 628, and climbing pretty rapidly, though not high enough for approvals on most things just yet. I am keeping my util under 10% and making on-time payments. I currently have Discover It ($1800, just opened), Cap One QS ($750, open since 2013) and Cap One Secure ($200, open since Feb 2015). Cap One will not approve me for a CLI on the QS just yet. Maybe in 6 months. The recent lates are the reason Cap One is not granting CLI's. Keep trying every month, don't wait another 6 months. It does not hurt at all to ask. I ask every month like clockwork. I'll be gardening until Feb 2016, which is when all baddies fall from my report, leaving only 3 late pays on the C1 QS card (1 from 2013 and 2 from 2014). "Fresh" late pays really hold your scores down. You should see score bumps as each late ages past 24 months. I have under 10 inquiries. I recently applied for Barclay Reward, Amazon store card and BofA Americard and was denied for all (yes, I called for recon-they want to see the baddies fall off my report before approval). BofA approved me a for a secure card offer, but I'm worried about having too many new accounts so I may hold off. Barclays will want to see at leat 18 months of perfect payments. If you want them, apply again when your lates get at least that old. I have a 20 year credit history thanks to a card my parents opened for me when I was a kiddo, and I've made on-time payments other than the late pays mentioned above and the very old baddies (there are 5) again due to drop by Feb 2016. Whats are these baddies? Thoughts?

Client Approved N/A

Hi,
What does Approved "N/A" mean for a client?
Is the computer/agent considered ok/everything is working?
I have seen that some clients has been a set to pproved and some to N/A, even if it is in the same boundary and domain.
/Mikael

Hi.
We are seeing the same issue on approximately 1% of our SCCM client installs so far. Our environment is Mixed mode. All clients are Windows XP SP2. We have 'Automatically approve in trusted domains' selected for our Approval mode.
I have reviewed the client logs as suggested by Wally:
clientlocationlog - client is assigned to a site
locationservices.log - client has discovered default MP for the assigned site (and proxy MP)
clientidmanagerstartup.log - I don't see any errors in this log and it appears that the client thinks it is registered (see snippet below)
==================================
RegTask - Executing registration task synchronously. ClientIDManagerStartup 12/15/2008 8:15:57 AM 3104 (0x0C20)
Reg Task: Client is registered, exiting. ClientIDManagerStartup 12/15/2008 8:15:57 AM 3104 (0x0C20)
Read SMBIOS (encoded): 3900390033004700390058003300 ClientIDManagerStartup 12/15/2008 8:15:58 AM 3104 (0x0C20)
Evaluated SMBIOS (encoded): 3900390033004700390058003300 ClientIDManagerStartup 12/15/2008 8:15:58 AM 3104 (0x0C20)
No SMBIOS Changed ClientIDManagerStartup 12/15/2008 8:15:58 AM 3104 (0x0C20)
SMBIOS unchanged ClientIDManagerStartup 12/15/2008 8:15:58 AM 3104 (0x0C20)
SID unchanged ClientIDManagerStartup 12/15/2008 8:15:58 AM 3104 (0x0C20)
HWID unchanged ClientIDManagerStartup 12/15/2008 8:15:58 AM 3104 (0x0C20)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE ClientIDManagerStartup 12/15/2008 8:15:58 AM 3104 (0x0C20)
Computed HardwareID=2:F64E8C91BC6B8979E11A5B8336243686E0697CD0
Win32_SystemEnclosure.SerialNumber=Not Available
Win32_SystemEnclosure.SMBIOSAssetTag=No Asset Information
Win32_BaseBoard.SerialNumber=J1UBT3CP1SF
Win32_BIOS.SerialNumber=993G9X3
Win32_NetworkAdapterConfiguration.MACAddress=<Not used on laptop> ClientIDManagerStartup 12/15/2008 8:15:58 AM 3104 (0x0C20)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:F64E8C91BC6B8979E11A5B8336243686E0697CD0
HardwareID2=150E7B03016000DC ClientIDManagerStartup 12/15/2008 8:15:58 AM 3104 (0x0C20)
========================
ccmexec.log - no issues communicating with MP
Does anyone have suggestions other than reinstalling the clients? We are just in client deployment right now and I'm wondering if this is something we're going to have to monitor on an ongoing basis.
Thanks!
Karen

How you can load the Genius mix list in a Ipod Classic 80 GB

Hi, G´day!
Somebody can help me about how you can load the Genius Mix List in a 80 GB Ipod Classic?
I have totally updated my Ipod Software and the Itunes but the Genius Mix List didn´t appear on my device, can you help me if is possible to load this kind of list?
Best regards!
Pedro López

Hmmm, I bought a 60-GB Ipod Classic at first then it was stolen. The thing is my 2 year warranty didn't kick-in, nether did my car insurance which doesn't cover theft.
So I had to take the loss and come up with cash for another Ipod but this time it was the 80-GB Classic. Now this one has crashed. So I may try ZUNE this time, are you listening @ APPLE ? I've only had this new one since July 7th- 07.
So far I've shelled out roughly $930.00 for two APPLE Ipods with the 2 year warranty in approve. 18 months.
Another thing is that I didn't transfer the warranty to the new Ipod. They don't tell you themselves about the transfer but you have to take the initiative yourself. They never offered to give me the paperwork. There you have it the pitfall of not transferring your warranty. Without that warranty you are left holding the bag. So get that warranty puuuleeeezze.

Podcast Rejected DJ Mix

Hi, my podcast has been rejected. It's a DJ mix and I fear it's because of copyright issues although I read somewhere iTunes doesn't accept responsibility for copyright. Other DJ mixes are on there too. After reading lots of advice and tutorials for DJs to get their mixes onto iTunes I planned my podcast and learnt how to get it on iTunes, not once was copyright explained as an issue. In case it's a technical issue here is the link to the feed: http://feeds.feedburner.com/SimmoJ-YouWantFresh
Thanks

If you have music in your podcast from any of the major record lables - like say - Coldplay - which you have in your podcast - then there is little to no chance you will ever get your podcast approved.
You need to make sure all your music is 100% Podsafe and does not come from any major record lables.
Even if Coldplay themselves gave you the rights to Mix their music - they don't have all the rights themselves - their Record lable has some and the record labels do not give podcasts the permission to make mechanical copies - which is what a podcast download is legally.
So if you want your podcast in iTunes - you must get rid of all RIAA music.
Best of Luck,
Rob W
podCast411

Mixing memory modules on Westmere

Dear Hardware gurus,
I have a 12-Cores Westmere. Do you know is it possible to mix different memory modules on it, namely:
6x1 Gb 1330Mhz
+
2x4 Gb 1066Mhz
and if yes, in which configuration?
Thanks a lot for any comment!

Kappy, thanks for the note.
I am actually going to order some more 1333 modules, but just for the short time I have to work with what I have currently (see my original post).
As I posted above, I tried a bit already to combine the modules and Mac doesn't boot
Can you suggest a configuration, which will work?

Approval Mix up

Similar Messages

Maybe you are looking for