AR9285 Windows cannot connect to Wi-Fi

In netbook I got an error message: Windows cannot connect to OpenWRT (my router's SSID)
wide card: ATheros AR9285
OS: Windows 7 SP1 64bit (Original iso, clean install, no Firewall and other software)
Pre-installed OS : Windows 7 SP1 32bit
Mode: 802.11n
Encryption: WPA2-PSK (without encryption does not work)
this happens after the computer will work and heats up until that time, everything works.
Tried various drivers:
10.0.0.55
10.0.0.274
10.0.0.297
10.0.0.298
in all versions after heating wi-fi refuses to connect, however the list of networks is displayed. What is the problem?
in windows xp (version drivers 10.0.255) on this netbook wi-fi working perfectly, in ubuntu 12.04 (native driver) too, in MAC OS X (native kext) too, however in windows 7 32&64 bit wi-fi not working, hence there is no physical damage....
Best regards!

Ok we need to know what laptop are you talking about before we can begin to diagnosis this problem? So what is your laptop P/N? So we can verify the wifi it has to begin to help.
How Do I Find My Model Number or Product Number?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

Windows cannot connect to the User Profile Service service

On startup error message 'Windows cannot connect to the User Profile Service service' appears and windows will not start. Windows starts in safe mode. No corrupted user profiles. No viruses detected. Cannot resolve the problem. Any ideas?

On startup error message 'Windows cannot connect to the User Profile Service service' appears and windows will not start. Windows starts in safe mode. No corrupted user profiles. No viruses detected. Cannot resolve the problem. Any ideas?

My win 7 home premium cannot connect the sharing printer (EPSON L1100) in Windows server 2003 it say "Windows cannot connect to the printer. Accses denied"

in My office there is a win server 2003 R2 computer, i install a printer Epson L1100 in that computer, and it successfull, and i can print using that printer from that computer..
I already share this printer, but when i try to connect the printer from my laptop using OS Win 7 Home Premium.. it has error
"Windows cannot connect to the printer. Accses denied"...
and then i try connect using other computer but same OS (win 7 Home premium) it still has same error...
i usually connect to the server computer using //(the ip of computer) , for example
//52.30.20.66 .. that is my IP server..
and than i right click in shared printer which appears in windows explorer, and i choose
Connect... but it contain error "Windows cannot connect to the printer. Accses denied"..
anyone know the solution from this error???
i`m sorry if my english is bad.. i`m from indonesia

Got a local password/username on your Win7 ? Create the same on the 2003R2 as you seem in workgroup
net user /add useraccountname mypassword
net localgroup users useraccountname /add (I think it's users the name, you can validate to be sure) or
net localgroup administrators useraccountname /add in worst case.
nb, or add the user guess in the printer share security
Regards, Philippe

Windows cannot connect to printer. 0x00...2

I work in a Domain environment where we have hundreds of printers on about a Dozen Print Servers. Some are 2003 and others are 2008. The Server I'm working with is 2003. The client work stations are Windows 7. We have several printers not mapping to the
designated clients. All installation of printers are controlled via scripts through GPO and based on what security group they belong in.
As far as I can see the computers are in the proper AD security group. But as students and staff log into the desktops, none of the printers show up. And when I try to manually connect the printer by going to the UNC path \\XXX-XX\printer_name it gives me
the "Windows cannot connect to printer"..... with a code of 0x00...2 (there are a bunch of zeros in there).
Now we have other printers that are mapped and are available to everyone. Its just those that are connected via a security group. So if a machine is in Room 123 and in the 123 group, they should get a color printer and a B&W printer for that room.
For some reason the color printer is not showing up, but the B&W is. Outside that group, other teachers can connect via their laptop, or other desktop. But All the computers that the students use, cannot map the printer.
I've tried the registry fix to clear drivers, I've renamed the "3" folder and that didn't work. I've tried applying Hotfixes but the ones I was given stated that they were designed for my version of windows. Even though the fix was for Windows
7.
I'm getting frustrated. Simple Printer 101 tricks aren't working. I think this is a level up higher and could be script or Domain related. Any thoughts?
Thanks,
James C. August II
A+, Net+ Certified

Error 2 is File not found.
C:\>winerror 0x00000002
     2 ERROR_FILE_NOT_FOUND <--> 0xc000000e STATUS_NO_SUCH_DEVICE
     2 ERROR_FILE_NOT_FOUND <--> 0xc000000f STATUS_NO_SUCH_FILE
     2 ERROR_FILE_NOT_FOUND <--> 0xc0000034 STATUS_OBJECT_NAME_NOT_FOUND
If the printer driver uses color profiles, make sure the color profile files are installed on the machine. Including the print driver name and where you got the driver might be useful.
Alan Morris formerly with Windows Printing Team

Windows cannot connect to the printer the local print spooler service is not running please restart the spooler or restart the m

We have 7 computers on a local network 3 of them have local printers 2 and are brand new Vista equiped. we shared the local printers on the vista machines but they are unaccessable from one vista to the other... it works from an XP to a Vista, but not from a Vista to a Vista.... go figure.... When we try to add the printers, the error message that we get is: "windows cannot connect to the printer. the local print spooler service is not running. please restart the spooler or restart the machine."
I would appreciate any help...
Thank you

This worked for me. GP
Problem : error 1075 and Local print spooler service is not running.
problem description : I have a Lexmark x4270 all in one. I installed the driver for it in my new laptop running Vista. Turns out the driver is not for Vista but XP. I uninstalled the XP driver and downloaded a Vista driver from Lexmark. When I try to run the printer software I get a message "Local print spooler service is not running. Please restart the spooler or restart the machine." I tried all of that. I have looked this problem up on the web and it is quite common with Vista. Many of the "solutions" say it is a problem with an incomplete removal of the incorrect printer driver and they show how to correct in the registry. I am not comfortable tinkering with the registry and thought I'd consult with you first.
I tried "everything" I could to fix the problem of getting "error 1075" fixed in my HP laptop running Vista. HP came up with simple solution below. The regedit part is what fixed mine. I did not need the safe mode part. I think Lexmark should add the solution to your knowledge base.
==============================
From HP: Please perform the below given steps in safe mode to resolve the issue.
Reboot your notebook and press F8. The system will show some booting options select safe mode.
Note: Starting computer in safe mode may take some time.
Uninstall the printer using Programs and Features from the control panel of your notebook.
Uninstalling any software from Control Panel :
1. Click on Vista (start) button
2. Click on control panel
3. Double click on Programs and Features
4. Click on YOUR Lexmark Printer and click on remove.
Download and reinstall the printer software using the below given link :
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:438:0:0&searchLang=en&os_group=Windows%20Vista&target=
NOTE: Clicking the link may give an error indicating it is invalid.
Copy and paste the entire link in a new browser window.
After the installation of drivers, restart the notebook into normal mode. Now plese check with printing any document. If the still persists then perform the below given steps :
Click on Vista (Start) button, and type Regedit.exe in search bar
Navigate to the following branch
HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Spooler
In the right-pane, double-click the DependOnService value
Delete the existing data, and then type RPCSS
Close Regedit.exe
Restart the computer.
This should resolve the issue.
For information on keeping your HP and Compaq products up and running, please visit our Web site at:
http://www.hp.com/go/totalcare

ITunes/Airport Utility Windows cannot connect to Airport Express

I really hope someone can help me with this since I have spent 2 days trying to get my new Airport Express to stream music with no luck yet.
I have a wireless network using Netgear WGR614 with WPA security settings. The AE has V6.3 firmware update and I used the Airport Admin 4.2 to set it up. I tried all the recommendations here and connected the AE to the router LAN port using ethernet cable and did a factory default reset. I then configured it to join my existing wireless network providing the WPA details.
That is when the problem starts. After successfully updating and rebooting the AE shows solid green LED. However, using Airport Admin to connect fails intermittently with error -6753 asking me to check my network settings even though they are fine. If I try a few more times, it connects and I am able to enter and modify settings. When doing another update, it again fails with error -6753, but a few retries later, it does go through. Note that all this time, the ethernet cable is still connected to the AE even though it is setup to connect to my wireless network.
Now, I unplug and relocate my AE near my stereo - it starts up fine and shows solid green light. My router "attached devices" page indicates that the device is connected with the DHCP ip address of 192.168.0.3. However, when I now try to use Airport Admin, it ALWAYS gives me the connection error -6753. The AE shows up in iTunes, but when I connect to it, it just hangs and after a minute or so, just gives up and goes back to the "Computer" speaker.
I tried to do a ping on the ip address, and it gives me "Request timed out". I thought maybe it is my laptop interfering so I did ensure that I turned off ALL firewalls, but the problem still remains.
So in short, AE seems to be joined and connected to my existing wireless network (green light), but neither Airport Admin nor iTunes nor ping utility can even communicate with it; and it seems to be due to the error -6753. I have tried pretty much every advise regarding connecting via wired etc. and nothing seems to work. This is not a wireless interference issue too, because the error also appears when connected via cable.
Any help really appreciated.
Thanks.
R

Thanks for the response. Here is an update:
I tried to connect to the AE from another windows laptop...and it worked. So it seems that it is only my laptop that cannot connect to the AE. The only difference is that I used my laptop to initially connect to the network created by the AE, and after that I could never get it to connect.
Interestingly, when I did manage to get into the AE and check its log, here is what I find...
Jan 1 00:00:00 5 Configuration updated.
Jan 1 00:00:01 5 Initialized (firmware 6.3).
Jan 1 00:00:15 5 Joined BSS 00:09:5b:fb:7c:7a
Jan 1 00:00:16 5 Installed unicast TKIP key for authenticator 00:09:5b:fb:7c:7a
Jan 1 00:00:30 5 Internet configuration leased (host 192.168.0.3/24 gateway 192.168.0.1 dns1 192.168.0.1 domain innomedia.com lease 7776000).
Jan 1 01:14:29 5 Disassociated with station 00:09:5b:fb:7c:7a (message integrity error).
Jan 1 01:14:38 5 Disconnected from network.
Jan 1 01:15:31 5 Joined BSS 00:09:5b:fb:7c:7a
Jan 1 01:15:31 5 Installed unicast TKIP key for authenticator 00:09:5b:fb:7c:7a
Jan 1 01:16:14 5 Internet configuration leased (host 192.168.0.3/24 gateway 192.168.0.1 dns1 192.168.0.1 domain innomedia.com lease 7776000).
Jan 1 01:27:18 5 Connection accepted from ::ffff:192.168.0.6/1153.
Jan 1 01:27:24 5 Connection accepted from ::ffff:192.168.0.6/1154.
Jan 1 02:35:43 5 Deauthenticated with station 00:09:5b:fb:7c:7a (leaving network).
Jan 1 02:35:43 5 Disconnected from network.
Jan 1 02:35:49 5 Disassociated with station 00:09:5b:fb:7c:7a (message integrity error).
Jan 1 02:35:49 5 Joined BSS 00:00:00:00:00:00
Jan 1 02:35:51 5 Deauthenticated with station 00:09:5b:fb:7c:7a (4-way timeout).
Jan 1 02:35:51 5 Disconnected from network.
Jan 1 02:35:59 5 Disconnected from network.
Jan 1 02:36:52 5 Joined BSS 00:09:5b:fb:7c:7a
Jan 1 02:36:53 5 Installed unicast TKIP key for authenticator 00:09:5b:fb:7c:7a
Jan 1 02:37:07 5 Internet configuration leased (host 192.168.0.3/24 gateway 192.168.0.1 dns1 192.168.0.1 domain innomedia.com lease 7776000).
Jan 1 02:50:49 3 Administrative access denied to ::ffff:192.168.0.2/2397.
Jan 1 02:51:08 3 Administrative access denied to ::ffff:192.168.0.2/2400.
The administrative access denied is pointing to my laptop, whereas the connection accepted was the other laptop from which everything works. So it seems that the AE is specifically not allowing my laptop to talk to it! Given that my AE is being connected in Client mode, there are no settings I can access to see why it has singled my laptop out.
Any help appreciated.
Thanks
R

Windows cannot connect to internet with airport

I have a macbook with Windows via Bootcamp. I have DSL. My mac OS can access internet fine (wirelessly and ethernet). I can access internet through Windows if I connect directly through the modem (ethernet). If I connect ethernet through airport, I cannot connect. Of course I cannot connect wirelessly either. I would like to connect wirelessly. Any ideas?
Thanks,
Rich

Richard,
Some items to consider.
First, can Windows see the wireless router? You can go under network settings in Windows and see if it "sees" the wireless access point. Or, you can log into the router and see if it sees Windows as a connected device.
Do you have any security enabled on your router? If so, have you set up the security on Windows?
Are you using DHCP on your router? If so, does Windows have a valid IP address?
Also, have you made sure that the device driver for the Airport Card under Windows is current and working properly?
Jeff

Windows Cannot Connect to Canon MP530 Printer via AEBSn

OK, here's my setup, and my problem:
1. Mac mini, Windows Vista PC, Windows XP PC all connected to an AEBSn via Ethernet.
2. Bonjour for Windows installed on both PCs.
3. Ministack w/built-in powered USB2.0 Hub & Internal HDD connected to AEBSn's USB port.
3. External HDD in USB 2.0 enclosure attached to Ministack via USB port.
4. Canon MP530 Printer connected to Ministack via USB port.
I can read and write to the Minstack's internal HDD and the other External HDD from any computer on the network, no problem. I can print to the printer from the Macintosh. But I CANNOT print from the Windows PC.
I can, allegedly, see the printer from the Windows machines and add it via Bonjour. I have also tried to add it via the method listed at iFelix's website (i.e. adding a printer by creating a new TCP/IP printer port). But nothing works.
Here is what happens: everything "appears" to work and the printer shows up on the Windows machines and in fact quite often once it is set up I can print a test page. However, once I try to use the machine later on, after the initial set-up it never works, this has happened now over about 15-20 cycles of installing, uninstalling, and re-installing the printer.
What I notice happens by looking at the Windows printer queue when i send a document to the printer in Windows is the following:
1. Sometimes the print dialog will simply say something like "Checking printer status" and just freeze there and nothing prints.
2. Sometimes it will add the document to the queue and then immediately delete it and nothing prints.
3. Quite often it will simply say something like "Printer is not responding" or "Printer is offline" and the print job just sits in the queue and nothing prints.
4. Sometimes, and I am not joking, the document will print out minutes later, inexplicably, once ten minutes later after the computer was turned off!
This is maddening and I would love a solution, even if that solution is ditch the Canon and buy "insert printer name" or "known working printer", because at this point I just need to print from the network with some consistency. I can print from any computer if the Canon is directly connected, but that is a horrible process of plugging and unplugging USB cables, and this is SUPPOSED to work.
Also, I would note that I am not adverse to using a switch with the printer, and would prefer an auto switch if anyone knows one that is know to work with PCs and Mac. I would prefer one that did not take an Ethernet port (like the new Belkin one) as I need all three of them for wired connections.
Any help greatly appreciated as I have been battling this problem for many days now with no help, and the Apple Geniuses at my local store could not provide a solution or even recommend a printer that was known to work with Windows via the AEBSn.

Thanks, Arimaris!
Appreciate the response!
Your first link should be: http://www.ifelix.co.uk/tech/8013.html
That is the link for the compatibility list for the NEWER AEBSn, the one you provided is for the older base station. I've seen this list before and the problem is that most of the printers are older there, and hard to find, and there is no certainty that if you do buy that older printer it will workk as the disclaimer on the article reads: "Please also note that due to changes in firmware and software upgrades some printers which are in this list may no longer in fact be compatible."
I would love to see an OFFICIAL lost from Apple about which printers are KNOWN to work with the AEBSn via USB, but I am thinking they might not do that so as not to anger their partners who cannot seem to make their printers function properly via Windows.
I've also tried the method mentioned in your second link, many times, and it does not work for me, either consistently or reliably. I've gotten the printer to work that way (creating a new printer port via TCP/IP w/ AEBS IP addy) maybe once or twice, usually right after I set it up, and then immediately after the test print, or after a restart, it stops working. I've also had it not work after set-up. I've also experienced the "It doesn't work, walk away, and then it prints 15 mins later" syndrome, with this approach. Also, it is a pain to later delete this new TCP/IP port and try again.
Something has got to give, someone has got to know the answer to this problem. I valiantly tried to get answers from the "experts" and "geniuses" at MacWorld this month, to no avail. Sorry you are experiencing the same, I feel your pain.

Windows cannot connect to mac server

Hi,
I have problem with a clients windows laptop. It used to be able to connect to their companies mac server. But since he got back from a trip the laptop doesn't connect anymore. I can ping the server. And when I try to redo the network drive I'm promted to enter my credentials. But whatever I enter it doesn't work.
I already tried to use SERVERNAME\user.... and also checkt sercurity policies.
Any Ideas? Thanks

If it worked before but doesn't now something has changed either on the laptop or the Mac server. Do you have access to the Mac server? If not, either you or your client should contact the server's system administrator about the problem.

Windows cannot connect to the printer, specified port is unknown

When adding any one of the many printers on one of the Terminal Servers i recieve this message.
I do not have this issue on the other three Servers, just wondering if anyone else has had this issue and can share advise
Luckily it's near christmas so the school is pretty much empty
Thanks
Johno
John Miller MCTS

I found my own fix so I thought that I would share
1.
Open Registry Editor, making sure that you have administrator rights.
2.
Expand HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Architecture\Drivers\Version-3
3.
Delete any subkeys for printer drivers that have been installed.
4.
Expand HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Print\Printers
5.
Delete any subkeys that reference any network printers.
6.
Close Registry Editor
7.
Go to Windows\System32\Spool and delete everything in the following folders
1.
Prtprocs\x64
2.
Servers
3.
Printers
8.
Restart the Print Spooler services
John Miller MCTS

"Windows cannot connect to the printer. Access is denied.

HP desktop running XP has HP C5250 printer.
connected to Linksys router via ethernet cable
MSHOME workgroup on desktop and laptop.
Norton firewall allows network throughput
laptop (Compaq C700 running vista) shows shows the printer in the network when I begin the "add a printer" procedure.
It will begin to the process but will quickly bail out.
The laptop can access any files that I've flagged to share on the desktop.
This question was solved.
View Solution.

I did download and ran the home network diag utility.
it shows that there is no network printer.
I should have described my desktop configuration as --
an HP Desktop connected to the router via an ethernet cable
an HP C5250 printer connected to the HP desktop via a USB cable and listed as shared in its properties.
It still shows as a network printer in the "Add a printer" dialog but will give the access denied error when you finish install.
Thanks for your effort --- I appreciate it. If you have anything else to try let me know. I'll check in the AM.

Cannot connect to printer hosted on a Win2012 Server with a Windows 7-64bit client (Error 0x00004005)

I have a Windows 2012 Server set up offering print services to our network, there are about 20 printers set up all deployed via group policy. Recently, on one of our Windows 7 machines I am finding that I an unable to connect to one of the printers shared
on the print server while other clients seem to be able to connect to the same printer with no problem. Also, the printer used to work just fine from this same Windows 7 machine.
To test things further I logged onto the Win7 machine as the domain administrator, connected to the print server and double clicked on the printer to attempt to install it manually (rather than letting Group Policy do it). When I do so I receive the following
message, "Windows cannot connect to the printer. Operation failed with error 0x00004005.
I have done some searching but the only references I am finding to this particular error message involved users attempting to connect to a printer hosted on a 32-bit version of Windows from a 64-bit client. However, in my case both the server and client
are 64-bit.
Can any one help me troubleshoot this 0x00004005 error?
Thank you.

Sorry for the delay. I just went and attempted to add the printer again on the client machine, the installation failed just as before, no log entries were recorded in the PrintService Admin log and the Operational log was disabled, I enabled it and added
the printer again. This time when the installation failed seven log entries appeared in the Operational log, all of them informational, no errors or warnings, the events are as follows...
1. Event 300, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D} was created. No user action is required.
2. Event 304, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D} was resumed. No user action is required.
3. Event 306, Settings for printer {71688D29-F70C-42F2-90E1-DA5D450E772D} were changed. No user action is required.
4. Event 306, Settings for printer {71688D29-F70C-42F2-90E1-DA5D450E772D} were changed. No user action is required.
5. Event 302, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D} will be deleted. No user action is required.
6. Event 302, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D},8 will be deleted. No user action is required.
7. Event 301, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D} was deleted, and users will no longer be able to print to this printer. No user action is required.
There are a couple log entries in the Admin log indicating an error occurred, those errors occurred yesterday afternoon at 4:30pm or so. I did not try to add the printer then so I don't know if these are related to this particular problem or not. This same
entry appeared twice at exactly the same time...
The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\PrintConfig.dll, error code 0xc1. See the event user data for context information.
As a temporary workaround I installed the drivers for that printer directly on the Windows 7 client machine and that works fine, however this is less than ideal because I had set up group policy to only install that printer for specific users, not for everyone.

2008 R2 printer server, cannot connect to printer, access denied, Windows 7 OS only

Deployed new Windows 2008 R2 domain controller, added print and document controll. Added several network printers on R2 server. We currently have mostly Vista biz clients but half a dozen W7Pro clients also. The Vista clients connect to these new network
printers, no problem but none of the W7 clients will connect. I select the printer from the drop down directory list and select to load the drivers, the system starts loading drivers and then right before it finishes it stops with error message, "Windows cannot
connect to the printer. Access denied. Again, this happens only with the W7 clients on our domain, Vista works fine.

By default, the security settings for Windows 7 and Server 2008 R2 allow users who are not members of the local
Administrators group to install only trustworthy printer drivers, such as those provided with Windows or in digitally signed printer-driver packages. You may want to install printer-driver packages on the print server
or in the clients. More details can be found this page: Cannot
connect to printer, Access denied -
http://www.chicagotech.net/server/print3.htm
Bob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

Cannot connect internet in Windows

When I'm using Leopard my internet connection works fine. I'm not using any router; my cable modem is connected directly to the Ethernet input.
But when I'm using Windows I do not succeed to set my internet connection. When I try to check my connection appear a message saying Windows cannot connect and to check with my service provider.
What's the workaround here?

Boot into Windows. Insert the Leopard DVD. The drivers should install automatically. If not, then click Start\Run and type "D:setup.exe" and hit OK (or type enter).
When you set up your router, you were supposed to choose an encryption scheme. This would have been one of none (bad idea!), WEP (also a bad idea!), WPA or WPA2. To check, you have to log into your router (usually by visiting http://192.168.0.1/ or http://192.168.1.1/ but read the manual for your router) and hunt around the wireless settings (every router is different; read the manual.)

Cannot connect to the wireless networking

My Toshiba Laptop was preinstalled with Windows 7 Home premium 64-bit OS, and it had been working quite well with the wireless BB. However, the wireless internet connection was on and off within recent weeks, while the other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always said 'Windows cannot connect to the wireless networking'. It seemed there was something wrong with the wireless adapter.
I got a new TP-Link wireless adapter properly installed. Luckily, this worked; but unluckily, this worked for less than 24 hours. It was really frustrating that I, as a full-time student, depended so much on wireless networking.
Please help!!! Harry

Hi there
You may want to enlighten us with:
- What model are You using (f.ex. L300-123)
- What BIOS version is installed?
- What WLAN driver are You using?
All these questions are answered in PC Diagnostics found under Toshiba app folder in the start menu.
BR
Tom

AR9285 Windows cannot connect to Wi-Fi

Similar Messages

Maybe you are looking for