Arabic Charcterset for Reports

Hi All,
I am using Oracle Develoeper 10g and have a problem for charcterset please help.
I have a made Form using Oracle registry parameter
NLS_LANG=American_America.WE8ISO8859P1 and USER_NLS_LANG=ARAB_SAUDI_ARABIA.AR8MSWIN1256
My Forms and Reports both contain Arabic and english data.
When i open a form it works fine and shows Arabic charcter and lable and layout.
And when i run a report from Report builder it works fine as well.
But when i call the same report from same Form, it do not show arabic label characters.
But when i make following change the
USER_NLS_LANG=American_America.WE8ISO8859P1
reports work well but form show invalid characters .
Please help.
Regards,
Imran

Looks like a bug, are you in the USA?
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Similar Messages

Code for reports field

Hello,
In Administration -> Setup -> Business Partners -> Countries there is a field called 'Code for Reports'. Does anyone know what this field is for? I thought it was for possibly putting in a different variation of the country code, e.g UK instead of GB to be displayed on printouts however it is not being displayed when i print preview/print.
Any advice is appreciated.
Many thanks,
Kate

Hi Gordon,
I've tried displaying code on the print layout too but this does not get pulled through either. I would like to use the 'code for reports' field to display 'UAE' instead of 'AE'. 'AE' is the default country code for United Arab Emirates which cannot be changed however the users would like to see 'UAE' instead.
Kind regards,
Kate

Arabic in network reports

upgraded from 5.1 to 5.5. now, when i try to computer reports, after entering the computer password i'm taken to a log-in page with the TEXT IN ARABIC! The URL is about 500 characters long, starting with https://services.linksys.com/lela_reporting/lela_reporting.jsp.... entering my email and password (guessing at what the arabic is asking for) doesn't seem to work. this happens from both of the computers on my network that have upgraded to 5.5 and occurs when asking for reports on computers running either 5.5 and 5.1.
OS Vista 32-bit
Router - Linksys WRT54G

Looks like a bug, are you in the USA?
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

(Request for reporting available) is not coming in Cube

Hi All,
I have Cube & DSO.
I added fields in DSO & Cube.
Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
thanks in advance,
Kiran.

Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani....

LabView Exe Application file not launch Excel application for report generation

Dear All,
I created one LabVIEW application file for report generation (using Excel Template).
While I run the program in programming mode it works well and create the report file in the specified path.
After creation of the application file(exe), it gives the correct path of where the excel template is placed. The same path is given to New Report.vi, but it gives the error 'File Not Found'.
Tell me, is any other configuration required for generating Excel reports? (During exe application mode)
Give me the solution.
Thank You
Jegan.

Hello,
Most likely you are encountering a problem of stripping and/or building paths. Probably the easiest thing to do is put a couple indicators on your front panel for the path or paths you care about, build your exe, and make sure you are really using the path you'd like. If you always put the report at some deterministic place relative to the exe (that is, even it the exe is moved, it will go with the exe and remain in the same relative path location, then you can use the Current VIs Path funtion found in the ... File I/O -> File Constants palette as a start path (where you will want to strip at least the exe name off of course).
I think this will bring some clarity to the issue!
Best Regards,
JLS
Best,
JLS
Sixclear

How to hide member Account dimension from BPC Administrator for Reporting

Hi experts, i need to hide some members of the Account dimension for reporting, because those members dont use it anymore, but i dont want delete them.
The question is: Does it exist any propierties for this dimension type that allows hiding members in reporting without set members in the BPC for Excel?
I can create a report which contain the members i want to show, but if any change occurs (client desire) the report is outdated.
Thank you in advance
Ignacio Vazquez

Ignacio,
There is no function like that.
You can choose below two options.
1. Create a property like 'NOUSE' and set a value 'Y' for unused member
When you create EVDRE report, set a filter against that property that has value 'N'
then those members will not be shown at the report.
2. Create 'NOUSE' parent member and put members under this parent member.
Maybe option 1 is more easier to do that.
I hope it will help you
James Lim

Please help to find table for report S_ALR_87013558 (budget commitment)

Dear SAP Guru,
How can i find the table that store the value for report S_ALR_87013558 ?
Many thanks in advance.
Nies

TABLES: RPSCO_X, COIX, COIX_DATA40, RKB1X, RKB1F, RKB1D.
PROJ, PRPS_R, ACT01, AUFK, VBAK, TCNDB, VSKOPF, IMTP, IMPR,
TCNDBT.

Request in cube is not avilable for reporting, how to trace this in chain?

Hello,
We have cube that gets the delta daily.
Some day, some body did full load and its failed.
Regular process chain delta load were sucessfull but they never turned reportable since the previous full load was failed.
Since we have not received any failure notification.
Is there way we can find if the request is not reportable to get notification>?
I have checked the avilable process types, it looks like we need to build custom process type.
Please advice.
Cheers
Angelo

Hi Angelo,
If the full update is run via a process chain then you can configure for that chain that if the load fails you get an email notification,
in the setup of the email notificaton you could make a reference to the target cube and then at least you know that if you don't fix this issue subsequent requests will not be available for reporting in the cube.
Best Regards,
Des

Simultaneous data activation in cube - request for reporting available

Hi,
I'm on BW 3.5.
I am loading several million records to a cube, processing is to PSA first and subsequently to data target.
I have broken the load up into 4 separate loads to prevent caches from filling up and causing huge performance issues.
When I load all the data in a single load, it takes 10 hours to load. When I break it up into 4 loads it takes 3 hours.
My problem is that during the loading from PSA to data target, the first data load becomes green and ready for reporting before the last one has finished loading, and so the users get inaccurate report results if they happen to run a report before the last request activates.
Is it possible to get all 4 requests to activate simultaneously?
I have tried adding an aggregate to the cube, no good.
I have tried loading the 4 loads to the PSA in sequential order in the process chain, and then loading from PSA to data target simultaneously (side by side), no good.
Does anyone have a solution?
Many thanks,
Paul White

Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani....

Request for reporting available after rollup. Why not before?

Hi,
In infocubes with aggregates, a dataload is not available for reporting until you roll-up the aggregates. This is very unwanted behaviour and we'd like to have the loads available at all times, with or without a rolled up aggregate. All our aggregates are rolled up in the same process chain block after all loads are done. This means that data will not be available for reporting until all loads have finished, something our customers complain about.
Because parallel rollup jobs collide, rolling up up after every infopackage would make our loadschedule very unflexible (difficult to plan parallel processes).
Is this possible (by changing a setting somewhere) to change this and make load available for reporting at all times, or is this one of SAP's standard programming decisions without any workarounds?
Cheers,
Eduard

Aggregates data is maintained in aggregate tables.
Unless, you roll it up after every data load, the aggregate data wont be correct and it wont be consistent with the data in the cube.
YES< the roll up job will not be complete unless the loading job is compete.
One suggestion is to review the process chain jobs and see if you can reshuffle the jobs.
But aggregate roll up has to happen after data loading job of that cube on which aggregate is built .
Ravi Thothadri

Request for reporting available icon is missing !

Hi,
I have an infocube which has been uploaded by ODS and the data load was successful.
But--
The request for reporting available Icon is missing in the request.
Prior to this dataload, yes there were falided requests which i had deleted before uplaoding it self.
Why i am not seeing the icon?
Raj

Hi Raj,
If you are using BI 7, then in the mange tab of the infocube check in the extream right ....
otherwise it should appear...
if you are talking abt ODS then you might have missed the step to activate data in ods.
hope this helps..
cheer's
HVR.

"Request for Reporting available " is not displayed after loading the data.

Hi
A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
Please advise on this.
Regards
loyee

Hi,
What is the status in Monitor. If it is ok, go to manage of the infocube,
in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
Click the first check box, (Set Quality status to OK). If you aggregates, choose second box.
Hope this helps.
Regards,
Rama Murthy.

User Comment field available for reporting?

User Comment field available for reporting?
When doing custom reporting against requests with reportable dictionaries we have a user request to also include the user comments. How do I reference / point to the comments field for a request?

If you are referring to the comments which are added in the Comments and History section of a requisition, this information is not migrated to the datamart and is not reportable.
If, on the other hand, you are referring to a comments field that you have included in a dictionary on the service form, that information will be available in the datamart so long as that dictionary has been made reportable.

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

Close ... before going for a specific Cisco app ... lets find out some details:
Host we need more details:
What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting).

How to dynamically set connection string for report in C# code?

Hi,
I have installed CRVS2010. I have created new Crystal Report WPF Application and new report. I would like to set connection string for report in code dynamically.
Is this possible?
Thanks
Ivana

Lots of posts in this forum on how to set database connections. WPF should not be a consideration as it's just a viewer. The report engine is still the same. Search these forums. Use the search box at the top right corner of this page. Look at samples here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Note that none of the samples above are using WPF, but like I said, the WPF is just a different viewer and will not impact how the report engine logs on to a database. (I think of it as a gray car vs. a red car. Same engine, just the color is different)
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Arabic Charcterset for Reports

Similar Messages

Maybe you are looking for