ASA5515-X and NGFW features

What NGFW features can be enabled if I purchase the ASA5515-x (ASA5515-SSD120-K9) and 3 year license of AVC, WSE, and IPS (ASA5515AWI3Y)? I was under impression that all three services can be enabled on a single ASA5515-x unit but I read somewhere that I can only enable one service at a time.
Also does the ASA5515-x even support AVC? I’m asking because it seems some people classify AVC as the CX service and it seems only the ASA5585-X supports the CX module.
I am very confused here. I would like to stick with Cisco and utilize the NGFW features.

You're welcome.
Here're the answers to your follow-on questions:
1) It has the SSD installed. IPS is a feature license on the NGFW. This in unlike the older 5500 series (and still-available (for now - but likely not much longer) 5500-X series with the legacy IPS bundle) which instantiated IPS via an SSM or SSC hardware module/card.
2) Funny the reseller site you linked to quoted my earlier responses on the matter. If you click through the Cisco Q&A link in that same blog post you will see it has been updated and now reads:
"Q. Do Cisco ASA Next-Generation Firewall Services support IPS functionality?
A. Yes. Cisco Next-Generation Firewall with IPS is currently supported and can simultaneously run alongside other services, including Cisco AVC and WSE."
I tried to post a comment over there to that effect but the function appears to be broken on their site.
3) Yes, that's correct. You will need to activate the license once you set things up.
If you're running more than one or two you would also be advised to have a look at off-box PRSM (separately licensed, runs as a VM in your VMware environment) as it will ease management quite a bit by allowing you to create and apply common policies across multiple devices.
Please mark questions as answered once they have been and rate helpful posts.

Similar Messages

How to order IPS Svc for ASA5515-K8 and L-ASA5515-IPS-SSP=?

Hello!
I have got ASA5515-K8 and IPS license L-ASA5515-IPS-SSP= ordered separately.
What smartnet should I order to enable IPS singnature updates?
I tried to order SU1 smartnet for ASA5515-K8, but Product ID ASA5515-K8 is not mapped to SU1 service.
Thank you!

Hello Andy,
Here is the information you are looking for:
Cisco Services for IPS
Cisco Services for IPS is an integral part of the Cisco ASA 5500-X Series IPS Solution and enables operators to
receive time-critical signature file updates and alerts. Part of the Cisco Technical Support Services portfolio, Cisco
Services for IPS allows your Cisco ASA 5500-X Series IPS Solution to stay current on the latest threats so that
malicious or damaging traffic is accurately identified, classified, and stopped. Cisco Services for IPS features
include:
● Signature file updates and alerts
● Registered access to Cisco.com for online tools and technical assistance
● Access to the Cisco Technical Assistance Center
● Cisco IPS software updates
● Advance replacement of failed hardware
For more information about Cisco Services for IPS, visit
http://www.cisco.com/en/US/products/ps6076/serv_group_home.html.

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
== URL of affected sites ==
http://www.hotmail.com

We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

What is new and updated features in SharePoint 2013 ? Looking example in details about all.

Hi,
Any help?
Thanks
srabon

Hi,
SharePoint Server 2013 includes a wide variety of improvements and new features. Such as:
Support the tools designers use: Flexibility in Branding
Offline and Sync of My Site
Search Engine Optimization & Analytics is in Search
Content Search Web Part
Optimized mobile browser experience
Rich Workflows
Development gets more familiar
New App Model
Shredded Storage
Social Features: Activity feeds
Reference the following article:
SharePoint 2013 Top 10 New Features
What’s
new in Microsoft SharePoint Server 2013
Also a good book
by you can have a look:
Exploring
Microsoft SharePoint 2013: New Features & Functions
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Error when moving files between Sharepoint sites using 'content and structure' feature

Hi,
I am using Sharepoint Online 2013 on a mac computer.
I am trying to move files between sharepoint sites/libraries but because the "open with explorer" link does not work on mac computers, I need to do so using the 'content and structure' feature.
When I select a file to move and then select the destination site/doc library, i get the following error:
An error was encountered performing this operation.
Operation to Move '120207_Australia Post_Invoice.pdf' to '/Ops/internal/admin/General Admin' failed
No items were moved. Please remove 120207_Australia Post_Invoice.pdf from the selection and retry operation
Please help!
Thanks,
Kate

Hi Kate,
If you mean only one file "120207_Australia Post_Invoice.pdf" could not be moved, please compare this file to the other files moved successfully, check if there are some differences, like the content types, fields.
Also compare the source library and destination library, make sure they have the the same type of fields.
And you could have a try of moving this single file separately see if it could help, or as a workaround to download this file from source and upload to the destination library.
Since it is related to SharePoint Online 2013, we cannot see the ULS log for more information, I would suggest you post this issue in Office365 SharePoint online dedicated forum via the following link for a better assistance.
http://community.office365.com/en-us/forums/default.aspx
Thanks
Daniel Yang
TechNet Community Support

I understand the design change to the whole "save as app" tab, but I feel that Save and Quit feature from the previous version of Firefox is much better than this "app tab" feature. Is there anyway for me to have this back?

Restore previous session button available on my Firefox homepage is great, but what I really want is the Save and Quit feature. I have always felt that its one of the best features of Firefox, second only to search address bar directly leading me to the actual page. I read some threads about this, and found the answers very unconvincing. One of the suggested ones was "Pin as app tab" . No, I don't want to pin every tab that I want to visit say, thrice as an app. Second suggestion was, click on the obvious button on the homepage to restore the tabs(this took me quite a while to actually see). Why this change in design? This is identical to Chrome's but its very inferior to what Firefox already had. Is there anyway, without downgrading of course, I can get that feature back?

Okay, I found the answer myself. Going to about:config and setting browser.showQuitWarning to true, restored that option and brought it back. Thanks to anyone who is about to post. If this is false by default, it has got to change.
-- Sorcus

Why does the drag and drop feature not work?

I have several files on my desktop. When I try to move them o a new location, they just 'snap back' to their original position. Why doesn't the drag and drop feature not function properly?

I'm just trying to move some files to a new position on the desktop.

Is there is a way to change the "Find and Replace" feature in Numbers 3.2 back to the way it used to be on Numbers '09 version 2.3?

In order to view my documents on my newly purchased Macbook Air I recently had to upgrade my 27" iMac to Numbers 3.2. The new version does fine for what I use it for except the new "find and replace" feature...It is TERRIBLE! It is so much slower than the older version. Plus I loved how the older version showed a table of all the matching word or items you're searching for and you could easily scroll through them to find the one that you were searching for.
My question is: Can you change the Find and Replace feature back to the way it used to be in version 2.3 or Number '09? If so, please show me how. I would really appreciate it.
The image below shows the new version on the left and the old version on the right just in case you don't know what I'm talking about...
Thank you.

Hi The.Gav,
Sad to say, but that feature has gone in Numbers 3.2
This discussion may help (or not)
Numbers - How use Find like the previous version?
Regards,
Ian.

Opening PDF in browser using Adobe API - with mark up and comment features

Hey,
Here is the scenario :   Firstly, the user has to review the file (say pdf) before approving it. I would like to open the pdf file in the browser directly for reviewing. Also, I want to add some mark up (sticky notes, etc) and comment features while reviewing. Using these features, the user can pin point the mistakes directly in the file and revert the file for changes if any.
And as part of implementation, I would like to use Adobe java API to do the same. But I couldn't find any code snippets for using this API.
Any kind of help would be appreciated. Thanks in advance.

This forum is only for discussions on the forums themselves. I would suggest that you start from the Acrobat forum,
http://forums.adobe.com/community/acrobat

Oracle xml DB and text features are not installed

HI,
I installed Sql developer 3.0 ,oracle 11g and jdk 7 on centos 5.when iam running sql developer its showing error message oracle xml DB and text features are not installed.
pls anyone help me out.
thanks
srinivas
Edited by: srinivas on Oct 17, 2011 4:49 AM

may be help you
Re: Connection Error - Oracle XMLDB and Text Features are not installed.

I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gon

I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gone. I had a small icon on the upper right side of my toolbar. I used it all the time to keep separate windows for news, financial items, travel plans, etc. Has this been removed from Firefox?

Hi,
The [https://support.mozilla.org/en-US/kb/tab-groups-organize-tabs Tab Groups] feature is still present. You can try to right-click the + after the last tab and [https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars Customize]. If the icon is hidden behind another, or if it's available inside the Customize mini window, you can place it back. If the problem persists, you can also try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen.

Ask the Expert: Cisco Unified Contact Center Express (UCCX) Version 10.0 - Upgrade, Migration, and New Features Overview

With Abhiram Kramadhati
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the upgrade, migration methods, and new features of the latest released Version 10.0 of Cisco Unified Contact Center Express (UCCX) with Cisco expert Abhiram Kramadhati.
Abhiram will address the following on the latest release of Cisco UCCX Version 10.0:
Installation
Upgrade from previous versions - both Linux and Windows
Migration from MCS to Cisco UCS environment - Different methods and best practices
New features - Overview and limitations
This discussion will center on install and upgrade best practices, changes in hardware support, and migration methods from MCS to Cisco UCS. He can also briefly discuss the new features introduced in 10.0. The discussion focuses the latest versions, but queries about general Cisco UCCX topics can be addressed too if time allows.
Abhiram Kramadhati is an engineer with the Contact Center Backbone group. He has been working with Cisco UCCX since he joined Cisco. During two years at Cisco, he has built his expertise around Cisco UCCX telephony applications, Java Telephony API (JTAPI) integration, Cisco UCCX system behavior, LDAP components, and Cisco UCCX as IP interactive voice response in Unified Contact Center Enterprise (UCCE) environments. He also works on other technologies, including Unified Communications Manager and UCCE. He has been involved in many technical escalations in the Asia Pacific region. Abhiram also holds a CCIE in voice (40065).
For more details about this topic, refer to the recently published Tech-Talk Video and Blog.
Remember to use the rating system to let Abhiram know if you have received an adequate response.
Abhiram might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation in the Voice, Video, and Collaboration community, sub-community, Contact Center discussion forum shortly after the event. This event lasts through January 31, 2014. Visit this forum often to view responses to your questions and the questions of other community members.

Hi Anurag,
Thanks for your questions.
1:Is there change in DB architecture as CUIC is the only option as compared to previous linux version UCCX ?
I assume this is from the tables regarding historical data. The database schema essentially remains the same since UCCX 9.0 had CUIC too and we had a seperate DB Space for CUIC and we still continue with that. The traditional historical tables remain and the replication process remains the same too.
2:Is there any version change for Linux OS used as VOS,
The Linux version is Red Hat Linux 5. To be precise:
[root@uccx10pub /]# cat etc/redhat-release
Red Hat Enterprise Linux Server release 5.7 (Tikanga)
3:Is there any API architecture change in UCCX 10 from previous releases ?
I can answer this more of an overview. The only enhancement in the API side is the introduction of REST API step in the script editor. You can now make REST calls from the script and this ofcourse opens up a whole new world of possiblities.
4:Since from UCCX 10 , we can only use either CAD or Finnesse at one time, whats the impact of changing this after some time in production, let say , i used CAD for 2 months and then i decided to move to Finesse, whats the impact ? or is it a smooth change as switching CUIC and HRC in previoius release ?
For the scenario you mentioned, there is absolutely no problem. The point to note is that the Finesse services are activated/deactivated but the CAD desktop services are ALWAYS running. The only condition to keep in mind is that you can use ONLY ONE type of agent desktop at any time. Also if Finesse is not used and CAD operations are used extensively, it is advisable to shutdown the Finesse service.
5:Is 3rd Party UCS hardware supported by UCCX 10 instead of using Cisco manufactured UCS , can i use HP hardware for Virtualisation ?
Yes, it can be used. This is something called as "Third party specs based specification". The most important things seen for compatibility are:
Inter CPU Model
It it is on thVMWare Hardware Compatibilty List
You can get more information about this on the "Can I use this server?" section of UC Virtualized Hardware page:
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#.22Can_I_use_this_server.3F.22
6:Is Host name change supported?
Yes, the hostname change is supported. The prcocedure is documented in the UCCX 10.0 Administration Guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_10_0/configuration/guide/UCCX_BK_W1AF9DDD_00_uccx-admin-guide-10.0.pdf (Pg 168)
Cheers,
Abhiram Kramadhati

Arabic and Hebrew features InDesign CC (2014 release) not accessible

Hello,
I need to create a lay-out with Arabic content in Indesign CC (2014 release). After checking how to go about that via the help-section (online and PDF) I have to conlude that the help does not help me any further.
It says I need to, from the paragraph panel options, set InDesign to the world-ready paragraph composer in order to have the text direction etc. features enabled. This, however, is not the case. The panel still looks like before and I get no Arabic / hebrew features.
This is the same for the character panel, wich also does not give the shown options for Character direction as shown in the Help screenshots.
I have followed all the suggestions in the help section.
I have also tried setting the default paragraph editor to World-Ready via the preferences, and then restart the program, but still no success.
Please advise, it's urgent.

Hi,
Every change of plugins is resetting preferences.
Each language has its own preferences. But you move or copy them manually but you might adjust them afterward, because everylanguage has not the same functionality. At least not on the same place.
Viele Grüße
Wilhelm Georg Adelberger
Von meinem iPhone gesendet
Am 12.12.2014 um 15:18 schrieb jonasdr <[email protected]>:
Arabic and Hebrew features InDesign CC (2014 release) not accessible
created by jonasdr in InDesign - View the full discussion
Hi William,
It worked!
Allthough I did not understand that, from the CC panel, I should install the entire app again. Thought this would go through the preferences window, but I noticed that, when changing the App language in the preferences, the app-list in in the panel changes.
Only thing is now: all the preferences and personal workspaces are gone:-(
Adobe realy doesn't make it easy, unless you're into IT, wich i am totally and absolutely not;-)
Antways,
thanks for the usefull info;
Have a great weekend
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7008710#7008710 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7008710#7008710
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can apple service turn on "find my ipod" if the ipod is lost, and the feature wasn't turned on?

can apple service turn on "find my ipod" if the ipod is lost, and the feature wasn't turned on?

No. It must be turned on by the user prior to the loss.

How can u have lock rotation off and mute feature off at the same time

How can u have lock rotation off and mute feature off at the same time

Maybe this will help. The link at the bottom is the same one that was posted above.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

ASA5515-X and NGFW features

Similar Messages

Maybe you are looking for