HI Raju,
The F4 help picks set types based on the product Type assigned to the category.
In comm_hierarchy table pick the category guid and pass this category guid to table COMM_PRCAT.
Pick the product type in this table for your category guid and pass product type to COM_PROD_FRG_READ_FRGTYPES.
Here you will see what all set types are supported by that prouct type.
Thanks,
Tejaswini.

Similar Messages

Not assigned set type to category

Hi, GURU!
I want to assign set type COMM_PR_MAT to my category in transactional COMM_HIERARCHY, but i don't see this set type in the list. I find this set type (COMM_PR_MAT) in transaction COMM_ATTRSET (Search for predefined set types).
How to assign set type COMM_PR_MAT to my category?

Hi,
You must ensure that the product type for both the category as well as set type. Only then will the set type appear in the list for selection in the category tab in COMM_HIERARCHY.
Set types cannot be assigned to a hierarchy directly as mentioned in your post.

Error: Set type Z contains multiple-value attributes

Hi forum,
I have a problem when i try to assign a set type with the same value but diferent name on another set type to the same product category.
This is the detail of the error but i dont know where i have to set this indicator:
If you set this indicator for a particular hierarchy, all categories and set types in this hierarchy are created in the PME.
This gives you the following extended maintenance options at category level:
You can assign set types with multiple-value attributes
You can restrict value ranges and maintain default values for attributes of customer set types.
Any sugerence about this?
Regards and thanks in advance,
Mon

Hi Nelson,
I create two set types, the description is not the problem. I have discover that when i try to assign these attributes in the same set type or in other appears this error.
The set types have the same values. For example:
zcountry1. Values: sp - spain. fr - france.
zcountry2. Values: sp - spain. fr - france.
When i try to configurate the comm_hierarchy in my category appears this error:
Set type zcountry2 contains multiple-value attributes.
Diagnosis
The set type ZGAME5 contains multiple-value attributes. It cannot be assigned to the category as extended maintenance has not been activated.
Procedure
Multiple-value attributes are stored in the PME. If you want to use the set type ZGAME5, you must set the Extended Maintenance Options indicator for the hierarchy.
Extended Maintenance Is Possible for the Hierarchy
Definition
If you set this indicator for a particular hierarchy, all categories and set types in this hierarchy are created in the PME.
This gives you the following extended maintenance options at category level:
You can assign set types with multiple-value attributes
You can restrict value ranges and maintain default values for attributes of customer set types.
Where is this indicator¿? in R3?
So, these are the steps...can anybody help to me?
Regards and thanks in advance.

Set type COMM_PR_SHTEXT error when creating product

I am trying to create a dummy0 product for untilities serivice.
I get the above error.
if I want assign set type COMM_PR_SHTEXT is not existing the list.
is there any way to overcome this issue?

Hello Nick_crm
A settype can only be assigned to one hierarchy per product type. The SAP delivered settypes that you have mentioned above are assigned to category Z_SLA (type Service). Hence you cannot use them in the category
you have defined (type Service).
It is advised to use the predelivered category SRV_ as a base category for creating services. You can assign the other enhancements (settypes) required to the category you have defined and later assign the service
to this category too.
Incase you do require to assign the mentioned settypes to your category then first you will need to regsiter your hierarchy as the base hierarchy in transaction comm_prapplcat.
I would like to point to the steps below as to how you can find out where the set types are being assigned.
1. Goto the transaction -> COMM_ATTRSET -> here enter the
set type as ' COMM_PR_SHTEXT' and now click the 'where used list'(there
is a button in the toolbar for the same)
2. Now you should see a list of all category ids along with
hierarchy id's where the settype is being used.
3. Select any one of the category id.
4. Now goto the trx COMM_HIERARCHY -> and click 'Open Category'
5. Now you can see the usage of the settype in settypes tab.
6. To design the settype -> goto the root category and remove the
same , so that you could now assign it to your own category.
Since a settype can only be assigned to one hierarchy per product type, It is advised to use the predelivered category as a base category for creating services. You can assign the other enhancements (settypes) required to the category you have defined and later assign the service to this category too.
thanks Willie

Dowloding product attributes / set type to Master Data in CRM 2007

We have created set-type and attribute in txn:COMM_ATTRSET.
Created set-type and assign attributes to them,you need to assign set-type to categories in txn:COMM_HIERARCHY by selecting the category.
And then you assign category to a product and hence your set-types are available to that product.
We are maintianing Attribute for COMPETITOR PRODUCT ( MAT_ZCPT as Category Hierarchy ). All Attributes are assigned to Competitor Product and Relationship is maintained with company Product .
What BApi or BAdi shgould be used .
When we are implementing BDC , SAP says from CRM 2007 they are not supporting GUI . Use existing BApi .
But we want to download more than 5000 Products . Please guide .
Regards,
Anup Reche

Hi Anup,
use the following bapi ;
BAPI_PPR_MAINTAIN:-This method allows the independent maintenance (create/change) of the following objects of Partner/Product Ranges (PPRs):
BAPI_PPR_MAINTAIN_40:-This method allows the independent maintenance (create/change/delete) of the following objects of Partner/Product Ranges (PPRs):
Badi:
PRODUCT_UPDATE2 -Obsolete: Create or Change Product
hope it will useful.
thanks
Hemant ghiya

Issue in Product Category regd Set Types

Hi,
I am customizing Product Category ( for CRM 5.0 standalone) for Material using Building Block guides. I have created root hierarchy and category as described. Now I want to create category for Sales products using the root category. While creating this category the BB guide states following customization steps
Basic Data on Category
Product Type     Material
Product / Object Assignment Possible
Product / Object Maintenance: Control Fields
Can Maintain Documents (Click this)
Can Maint. Conditions (click this)
But in my case I am not able to see following in Product / Object Maintenance: Control Fields section (following 2 controls)
Can Maintain Documents
Can Maint. Conditions
Because of this I am not able to get Set types COMM_PR_UNIT, COMM_PR_LGTEXT1, and COMM_PR_SHTEXT
Pl provide guidance and assist this is quite urgent.
With regards
Ambar Adhav

Please check this ...
1. You have created a hierarchy...
2. you have cretad a root category...say CRM_PROD
3. check whether you have created a sub category under the root category.
    to do that... Please click on CRM_PROD.. right click and create category..
then we can see the
Can Maintain Documents
Can Maint. Conditions
Hope it helps..
<b>Reward points if it helps you..</b>
Yaswanth.K

Predifined set types in product category

Hi forum,
the pre defined set types viz comm_pr_shtext,comm_pr_unit.... are not visible in the category(service) which is assigned to the hierarchy.so creation of products under this category is not being allowed by the system.are there any settings to correct this.plz guide.points guaranteed.
thanks in advance
shridhar

hi,
i have replicated the problem in my system, it is working fine.
answer the following:
have you created a category for service for a base hierarchy, say "Service"?
Have you specified the product type while creating this category?
Have you selected/ checked 'Product/object Assignment Possible' ?
have you created another category for your purpose say "Maintenance below the above category "Service"?
if you have done the above steps, you should be able to assign the SAP provided set types to this new category.
otherwise raise a note to SAP.
regards,
Rishi

Pre defined set types are not determined in CAtegory

Hi all,
when i try to create a category for a service product for SLA, the pre defined set types are not getting populated for me.
I have created a new hierarchy, assigned to product and product type.....
but still when i create a category the list of predefined some of the predefined set types are not getting displayed.
Can anyone help this issue.
kindly advice in this regard.
Thanks,
Subhashini.

Hi,
Thanks for the reply.
I have assigned the product type service in the category.
This is the only custom category available. only one std category has this set types. other than that nothing is there in the system.
is there any services that has to be activated or any authorization that is missing for me...
nut i have sap_all...could not able to trace out the problem.
kindly guide.
thanks,
Subhashini.

Can't find Set type when maintain Product Category in Local Scenarios

hi, expert
We use SRM7.0 in Local Scenarios. Just create local material.
Our developer made a 'Product Categories mass inport programme' , but for some unexpected reasons, we cann't check or edit original prodcuct categories. so I have to create new product category manually.
When i create prodcut , i get a error message ' Data cannot be maintained for set type COMM_PR_SHTEXT . ' So i wanna add set types 'COMM_PR_SHTEXT' to this product category. but i cann't find this set type in the list whiche ever exist !
which i can find in the list show below:
      CALL_FWD_TD
      COMM_PR_GTIN
      COM_COMMERCIAL
      COM_TA_R3_ID
      CRMM_PR_TAX
      GSM_PHONE_TD
      ISPS_MARA
what should i to do, make the set type 'COMM_PR_UNIT' , ' COMM_PR_SHTEXT ' and some 'Z_xx_settype'... can be used.
Thanks .
                          claud
Edited by: Guang Li on May 23, 2011 7:07 AM

Hi
check this link
Materials replication from R/3
Regards
G.Ganesh Kumar

SET Types for ISAM Category

HI,
We are tring to download Vehicle details from SAP VMS to SAP CRM through middleware. We have created new category ISAM. We find lot of set types in various online help. Can any one provide the Exact SET types to be used to download all the vehicle related details includinf for ISAM_OWN_UPLOADED.
With Regards,
Selvam

Hi Selvam-
Were you able to load data into CRM vrom VMS? I am trying that and as you said there is lots of documentation but I am looking at specifics. Could you share your experiences?
Thanks, Amit

Unable to remove the Set Type assignment to product Hierarchy

Hi
I have created a set type and assigned to a product hierarchy.
Now I want to undo the assignment as this has been inherited by the lower level hierarchies.
Can anyone suggest how to remove this.
Thanks & Regards
Subhabrata

Hi Dash,
Sorry to say that once you have assigned the set type to a product hierarchy you can not remove this.
Best regards,
Vikash.

Payments based on inventory type, item category...

Hi,
I am trying to develop a report to show unrecorded liabilities - basically, I need to find out if there are payments/accounting documents/invoice number existing in the system, that has no connecting documents in purchase or sales side. I am able to do this using REGUP/BSEG/VBAP/EKPO (and corresponding header) tables.
I am stuck at one requirement though.
"Segregate payments in to inventory, non-inventory, no-link categories based on product/service (item type/item category) or/and vendor type (inventory/non-inventory)."
Can someone please tell me how to divide payments as mentioned above? Is it based on material type?
Thanks in advance!

If FI postings for inventory and non-inventory are posted to different G/L accounts then you should be able to filter that using HKONT field in BSEG. On the purchasing side, if G/L account number won't suffice then check if you can use cost element field KOSTL. On the sales side you should be able to filter this using PRCTR.
If this approach cannot be used then you have to drill down to VBEP table and check if there is a movement type attached to this order item (for third party items, check for VBEP-LFREL = X). This will be accurate depending on how sales configuration was set up.
On the purchasing side, use a combination Item category and Account assignment category in table EKPO to identify and segregate the totals.
Raj
PS: The first approach is the best approach and I hope that is how they have configured it in your system

Creation of Service Product with Set Type and Attribute

Dear All,
Please guide me with proper step by step process,
How to create the product with the set type and attribute for service industry in sap crm 7.0
Regards,

Hi Nitin,
Before creating the Service type of product, you have to define the Base category for Service type product. Generally the category for service will be created under the R3 hierarchy R3PRODSTYPE. You can create this category using the TCode:
COMM_HIERARCHY. Here you have to select the product type as Service and have to assign the set types to the category.
You can create a service product using the transaction : COMMPR01 -> Click on Service ICON -> Select the Category for Service Type. Then fill in the details for Service Product description, Service ID(Based on number range settings for products), Language.
Also fill other details like Base Unit of measure, Pricing condition for different sales areas for the service product.
Since you are using CRM7.0, you can do all these activities using a POWER USER role.
For more information about Set types and hierarchies please refer the following help link:
http://help.sap.com/saphelp_crm70/helpdata/EN/46/57672501a208e7e10000000a114a6b/frameset.htm
Hope this helps!
Regards,
Chethan

Missing Set Types in CRM 5.0

Hi Gurus,
We are trying to create hierarchy/category in our standalone CRM 5.0 system. However, after creating a new (base) category under the hierarchy we created (no other hierarchy in system), we cannot find the text-related set types (COMM_PR_LGTEXT1, COMM_PR_LGTEXT2, COMM_PR_SHTEXT). Can you please advise why this happened? How can we bring the set types back to the selection list?
Many thanks,
Leon Cao

Hi Leon
I've recently faced this issue. Following is the solution:
These particular set types can only be assigned to one Hierarchy and categories in that hierarchy. However this hierarchy must be assigned to the applications first.
You need to be very cautious for doing this.
1. First identify any other hierarchy (e.x. Hierarchy XYZ) where these settypes are assigned. If such hierarchy also contains products then you need to delete those products to cancle the assignemnt of these set types from that hierarchy XYZ. you can use the following reports to delete the products a) COM_PRODUCT_DELETE_ALL and b) COM_PRODUCT_DELETE_SINGLE. to run these reports you must make entry in 'COMC_PR_TOOL_REG' tabke. To run these reports use transaction SE38 and to make entry in the table use transaction SE16
2. Once all the products are removed. Then you can remove these set types from this hierarchy XYZ.
3. Assign your hierarchy to the applications in IMG -> CRM-> MASTER DATA -> PRODUCTS -> CRM STANDALONE here select assign hierarchy to applications and assign your hierarchy.
4. Now you will be able to add these settypes to your hierarchy.
Comments: If you cannot delete the products for any reason then the best way is that you create the required products under Hierarchy XYZ and also assign your hierarchy to these products. this way you will be able to make use of your hierarchy.
Caution: if these set types are assigned to hierarchy R3PRODSTYP or R3PRODHIER or R3MATCLASS. then do not even think about removing them because they may have been downloaded from backend R/3 system and will be unmodifiedable. Here follow my comments stated above.
Hope this will answer your query.
Cheers
Avi

How to Change an Attribute of A SET TYPE in SAP CRM

Hi ,
I have created an ATTRIBUTE through comm_attrset, and assigned it to a SET TYPE. Now I wanted to change the data type of this attribute. Its not allowing me to delete it, as its already assigned to teh SET TYPE. Moreover the set type is also not getting deleted as its assigned to a category ID.
Kindly let me know how can I change the attibute , if any one of you have come accross such situation.
Thanks
Asish
Edited by: Asish Dash on Sep 8, 2009 10:57 AM
Edited by: Asish Dash on Sep 8, 2009 10:58 AM

Hi Manish,
From my experience, you cannot change an existing attribute of a set type (esp. when it has a dependency).
You need to delete the attribute, save the changes and then re-create the attribute with new value table.
Also remove any dependencies before deleting the attribute.
Regards,
Vartika

Assign Set types to category.

Similar Messages

Maybe you are looking for