ATP quantity is less than the available stock.

Hello,
A material is managed in batch.
When I create a delivery for a sales order the ATP quantity is showing less than available quantity.
MMBE:
Material: AAAA
Storage Location: XX
Batch: 11001                      Unrestricted stock: 742750 KG                        Blocked Stock: 718000 KG
ATP quantity should be: 24,750 KG
Where as in VL01 while creating delivery it only suggests 24,500 Kg.
What could be the reason.
Sensing deficit of stock, I am creating a planned order through MF50 for another 750 KG.
Then in VL01 I get a proposal for 24750.
Why is it so?

Hi S P,
Did you check the all the points from OSS knowledge base article 1837190 - Non-confirmation in sales documents or deliveries because of inconsistency ?
Regards,
R.Brahmankar

Similar Messages

  • Disable Booking if Reservable Quantity is less than the Ordered Quantity

    Hi Everyone,
    How can we disable booking of sales order if the quantity reservable for an item is less than the quantity ordered in the sales order?
    Best regards,
    Paul

    You need to Modify WorkFlow . You can do something like this.
    1) Add a custom node between Book-Eligible and Book Node
    2) Write your logic Inside the proc, which will get called from newly created custom node.

  • How order got transmitted even if quantity is less than the minimum

    Hi All,
    We have an issue where an order has been transmitted for 23 cases where minimum is 25. This order came through even if this order is for that part of the region that should not be able to tranmit orders if under min..
    Being a technical guy, I am not able to understand the issue itself.
    Doubts :
    1. How an order is supposed to be transmitted ?
    2. What is this minimum below which an order should not be transmitted? Where this minimum value is defined ? Is it specific to customer or specific to area or specific to plant?
    In which table or through T-Code I can check this minimum ....
    Can you please guide how to explore the above....
    Thanks in advance.
    Regards,
    Sanjeet

    Hi Sanjeet
    You can maintain "Minimum order quantity" in the Material master data.
    Go to change mode of material master (MM02), enter your material number, click enter, select the "Sale org 1" tab and continue.
    Now, in the "Sales org 1" tab , scrolled down and you will find a field "Minimum order quantity" as you required, save it.
    Suppose, you have entered ,minimum order quantity as 10 pcs.
    If you create an order for that item and if the quantity is below 10 pieces then system will give you "warning message". This is normal standard setting.
    If you want that system should give "Error message" instead of "Warning message" , then go to transaction code "OVAH".
    For combination "V4" and "082", change the sytem message to "E" (normally you will find here W).
    NOW, SYSTEM WILL GIVE YOU ERROR MESSAGE IF YOU ENTER , in the Sale order, order quantity which is  less than the minimum order quantity as specified in the material master data.

  • How Order was transmitted even if the quantity was less than the minimum

    Hi All,
    We have an issue where an order has been transmitted for 23 cases where minimum is 25. This order came through even if this order is for that part of the region that should not be able to tranmit orders if under min..
    Being a technical guy, I am not able to understand the issue itself.
    Doubts :
    1. How an order is supposed to be transmitted ?
    2. What is this minimum below which an order should not be transmitted? Where this minimum value is defined ? Is it specific to customer or specific to area or specific to plant?
    In which table or through T-Code I can check this minimum ....
    Can you please guide how to explore the above....
    Thanks in advance.
    Regards

    Sanjeet,
    Check the table MVKE
    MVKE~AUMNG
    MVKE~LFMNG
    thanks\
    Mahesh

  • Confirmed quantity is less than open quantity in sales order

    when i create a sales order the Cumm ATP quantity was less than the amount specified in the sales order, i checked my stock and i have enough stock yet my delivery quantity is less than my sales order quantity and if i maually try to increase the amount in the delivery to what i have in the sales order it gives a message only  xxxxx available . what can i do?

    Date               MRP e                                                             Reqd Qty     Confmd    *** ATP
    01.09.2011    Stock                                                                    457
    15.08.2011    CusOrd Totals record                                           20 -               0             0
    19.08.2011    CusOrd    Totals record                                       3,780-         3,780         0
    30.08.2011    CusOrd    Totals record                                       975-           300        3,323-
    31.08.2011    CusOrd   Totals record                                       150-            150         3,773-
    01.09.2011    SLocSt                                                                 0401           378         378-
    01.09.2011    SLocSt                                                                 0402            79            79
    I have put the text above for your use, so you can now help me out, i hope to hear from you soon.

  • Message no. RM109 The quantity at RP  is less than the quantity at next RP

    Hello everyone,
    I am getting an error in regards to a reporting point.  I tried going into MF4R to reset the reporting points and when I do I get the following message:
    The quantity at RP 0220 is less than the quantity at the next RP
    Message no. RM109
    Diagnosis
    The reporting point structure is inconsistent as at reporting point 0220, the backflush quantity is less than at the subsequent reporting point. In a consistent backflush, the quantity at a subsequent reporting point (work in process) always less than or equal to the quantity at the previous reporting point.
    Procedure
    Check the reporting point stocks using transaction MF26. Post any missing quantities at previous reporting points.
    I have went into MF26 and  "Yes" reporting point 0220 is less than the following reporting point.  My question is... how do I fix this?  Any help will be greatly appreciated.

    Good morning Raj,
    Here is what MF26 is showing:
    614830             0033 0001 W3300
    0010                84  PC
    0020                38  PC
    0030                38  PC
    0040                38  PC
    0050                38  PC
    0060                84  PC
    0070                84  PC
    0080                84  PC
    0090                84  PC
    0100                38  PC
    0110                84  PC
    0130                38  PC
    0140                38  PC
    0150                38  PC
    0155                84  PC
    0160                38  PC
    0165                84  PC
    0170                84  PC
    0180                38  PC
    0185                84  PC
    0190                84  PC
    0200                38  PC
    0210                38  PC
    0220                38  PC
    0225                84  PC
    0230                84  PC
    0240                84  PC
    0245                84  PC
    0246                84  PC
    0250                84  PC
    0260                84  PC
    0270                84  PC
    0280                84  PC
    0290                84  PC
    As you can see RP 0220 shows only 38 pcs  RP 0225 and up shows 84 pcs.  Using MFBF I backflushed 46 pcs to RP 0220 to make it equal to the 84 pcs.  But, when I went back into  MF26 RP 0220 still shows 38 pcs.
    Thank you for your help!
    Rhonda

  • Create TO for a quantity less than the delivery quantity

    If we have created an inbound delivery in MB1C, 561 movement to post an initial entry of stocks, and then packed the HU in Vl32N. Now, we want to create a TO for a quantity less than the delivery quantity.
    In LT03 I cant see any option to change the TO quantity. How can we actually change the TO quantity to be less than the Delivery quantity.
    Thanks
    -Mike

    Mike,
    I dont think that's going to be possible.  The TO gets data from the del qty which is in your embedded HU since you have packed the qty in the del in the HU,
    so if you are trying to create a TO with less qty means that you want a qty less that the HU in the del and this is not possible.
    Alternatively : 
    1) You can receive it in your warehouse.
    2) Move it in a re-packaging area
    3) break the HU and re-create a new HU.
    4) Pack the desired qty
    5) Move the 2 HU's back to their desired bins.
    Hope this helps and works!
    thanks'

  • Excise invoice quantity cannot be less than the quantity received

    Hi,
    I have done MIGO with part 1 entry but while doing J1IEX, I am getting an error message 4F109 : Excise invoice quantity cannot be less than the quantity received.
    Please note that we have done MIGO with 5000 qty. and doing J1IEX with short 3000 qty.
    Regards.

    Hi,
    For this case of "Part I" selected during GR, you need to create Excise invoice thro J1IEX ->  Capture Excise Invoice -> Good receipt (use the material document number), which will complete the part II posting. Then you can proceed with MIRO.
    With regards,
    Jeeva.

  • Required delivery date in sales order shoud not be less than the inhouse pd

    Customer Requested Dates (CRD) entered in orders are often shorter than Product form wise lead time. 
    Logic to be configured in SAP : SAP should capture the CRD as per the lead time of Products or Date entered by sales persons (whichever is later).
    Required delivery date in sales order shoud not be less than the inhouse production lead time.
    Please help.
    Regards

    IMG - Sales and Distribution - Basic Functions - Availability Check and Transfer of Requirements - Availability Check - Availability Check with ATP Logic or Against Planning - Carry Out Control For Availability Check
    Here select the combination of your Availability Check & Checking Rule.
    Under Replenishment Lead TIme, you need to put a Tick Mark in the Check Box of "Check without RLT"
    This will make sure that system considers either the Requested Delivery Date or actual Material Availability Date, which ever is earlier.
    Hope this helps.
    Thanks,
    Jignesh Mehta
    Edited by: Jignesh Mehta on Nov 9, 2011 12:18 PM
    Edited by: Jignesh Mehta on Nov 9, 2011 12:23 PM

  • What happens when an iPod is synchronized with an iTunes library that is bigger than the available space on the iPod?

    What happens when an iPod is synchronized with an iTunes library that is bigger than the available space on the iPod? I did this some time ago. On screen was shown available space somewhat less than 120 GB, but maybe somewhere between 10 and 20 GB more in the library. I had to get the iPod updated anyway, so I did proceed. However, afterwards the total content of the library was only about 110 GB. Now I wonder what did actually happen. Was the first sign only corrected for double copies of the same files or lost files or where files deleted from iTunes? And if files where deleted from iTunes, were they also deleted from my computer?

    Same as you would if you bought a pc; copy everything from your old computer to your new one.  Then you can just sync everything from the new computer, as you did with the old one.

  • PO is getting released even if the total amount is less than the last PO am

    Purchase Order is getting released even if the total amount is less than the last PO amount. The release strategy is only working for the first Purchase Order and if the PO amount is greater than the last PO amount.
    Please let me know how to correct this scenario (release strategy).
    Regards,
    Prishu

    Hi,
    Release strategy has nothing do with the previous PO amount. May be, Co-incidently the amount in previous PO which you are referring and the characteristics value maintained in the release strategy is same.
    1) Please go in release strategy by the path mentioned below
    IMG u2013 Material Management u2013 Purchasing u2013 Purchase Requisition u2013 Release Procedure u2013 Procedure with Classification u2013 Set Up Procedure with Classification
    2) Then go to release strategy. Here the total available release strategies would be displayed. Double click the strategy which is getting reflected in the PO you want and go the classifiction tab. There you will get the PO value. Based on this characteristic value the respective release streategy gets refelected.
    I hope this clarifies.
    Regards
    sachin

  • MacBook Pro w 500 GB hard drive less than 10% avail.

    I have a MacBook Pro w 500 GB hard drive less than 10% avail.  My iPhoto file is huge, almost all of my space.  Apple tech support suggested a 2 GB Time Capsule. I haven't been able to set up iPhotos off of the laptop to work remotely in iphotos.  Is this the setup I should be going for or would buying a iMac with 3 GB hard drive be better solution?

    I agree with Linc.  I suggest you upgrade your internal drive to a 1 TB drive for lots of space and a substantial boost of speed.  Managing one internal drive is much easier than managing external storage, especially when you consider the need to backup the data.
    New 1 TB hybrid SSD-disk drives deliver high capacity with an 8 GB SSD buffer that performs at SSD-like speeds.  Google "Seagate 1 TB hybrid-drive 2.5”. 
    For an easy installation and transfer kit see
    Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
    SATA enclosure: http://eshop.macsales.com/item/OWC/ES2.5BPU2W/
    P.S.  If you do not have a backup drive you should get one.
    Time Machine Basics: http://support.apple.com/kb/ht1427

  • Header qty is less than the operation qty.

    To certain production order header qty is less than the operation qty. Please advise me.

    Dear,
    Base Quantity - Quantity of the material to be produced to which the standard values of the operation refer.
    Operation Quantity - Quantity planned for this operation.
    Base quantity and operation quantity may not always be the same, if we have partial lots delivered during the sequence of operations, the operation quantity will be equal to the lot delivered during the operation.
    Base quantity is dependent on the BOM, where it signifies the total quantity of output after using the components of certain quantity.
    In routing, you neeed maintained there operation quantity, and unit of measure of operation quantity accordingly with base quantity unit of measure.
    Check up the Processing formula used in the Scheduling tab of Work center (Use SAP002 = Machine * Oprn qty / Base qty / No. of splits)
    Hope clear to you.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Oct 7, 2008 11:37 AM

  • Delivery quantity is less than minimum delivery quantity

    Hello Experts,
    I received an error log "Delivery quantity is less than minimum delivery quantity 20 EA" when I first tried to create delivery using sales order. Well the reason for the error log was because of the CMIR record maintained in the system with min quantity set as 20 (Ordered Quantity = 10 in the sales order).
    After realization, I did delete the CMIR record and then tried to create delivery for the same sales order but I'm still receiving the same error log "Delivery quantity is less than minimum delivery quantity 20 EA".
    How can I overcome this issue.
    Any help will be highly appreciated.
    Thanks in advance

    Hi Hegal,
    Thanks for your quick response.
    But I've one more question regarding the same error log.
    Initially the Ordered Qty was 10 and CMIR record was with 20 and it gave me a error log (which works as expected).
    I deleted CMIR record and it still gives the same error log "Delivery quantity is less than minimum delivery quantity 20 EA".
    Later when I increased the sales order quantity to 20 or more, I'm not getting any error log even though CMIR record is not maintained in VD52. This is something which is unusual and I feel there is some place in the file where this information is stored and later compared against the sales order quantity.
    This is something which I would like to know for my own understanding.
    I did ask user to delete the sales order line item and reenter the same product and now everything is working as expected.
    Thanks

  • The amount of down payment must be less than the invoice amount

    Hi all,
    Our customers are using SAP 2007-PL15 and SAP 2007-PL41.
    When we want to create a down payment for a sales order, and we want to pay the entire amount of the sales order, including tax, we have to put an amount inthe TOTAL field of the Down Payment window since by default, the down payment amount is the total of the invoice before applying tax.  The DPM is
    higher than 100% (strange but I think it's normal since the down payment is not planned to take the tax in consideration).
    Then, we create an incoming payment for this down payment. It's ok.
    Then, we create an invoice based on the sales order we have paid with the down payment. It's impossible to use the down payment for the invoice... why that ? We receive the error 'The amount of down payment must be less than the invoice amount'. This causes big headaches to our customers !!
    Could you explain us what to do please ?
    thanks,
    Luce

    I'm very sorry, I have a similar question in dealing with AP Down Payment Request Linked to AP Invoice,  my case like this:
    1. I created 3 AP DPRs,their amount are each 100,000 RMB(for example, their document number are 10,11,12). then do the outgoing payment fully paided.
    2. I created a AP Invoice with the amount 150,000 RMB(for example, this AR Invoice document number is 5). I use the buttom"Total Down Payment",and selecet AP DRP No.10 and 11. When I click the buttom"Add",an error shows:
    The amount of down payment must be less than the invoice amount
    and I don't know how to continue.....
    Many Thanks
    Kam
    (PS:My English is poor,forgive me please. Shall I Speak in Chinese? then I can describe this question more clearly.)

Maybe you are looking for