Auto check number pick while doing the F110

HI All,
Mentioned error message shown while doing the F110.
Check number status at beginning of processing:
My object is to pick the cheque numbers automatically ,while making the payments through F110.
System is not consuming the numbers.
Rgds
Mani Kumar

4 Possibilities -
> Check if you have the RFFOUS_C program defined for the payment method in Country settings - FBZP.
> Check if your variant for RFFOUS_C has the right payment method for printing checks.
> Check if yo have any other proposal for same vendor already created but not finished the payment run for that. It might be due to duplication of entries.
> Check your check-lot. Hope its not exhausted.
Please search forums for more.
Regards,
Zubin

Similar Messages

  • While doing the goods issue system is thruoghing an erro message no VL621

    hi ,
    actually while doing the goods issue we had put a validation if that filed(serial number) is not valid.like AVAILABLE then the system has through to an error message.but after that error message system is throughing an nother error.
    Risk of posting several mat.documents for one delivery->long text
        Message no. VL621
    Diagnosis
        Processing has been terminated because there is the risk that the system
        creates several material documents for this delivery.
    Procedure
        If this message occurs frequently, please note the exact situation and
        procedure as well as error messages and inform the system administrator.
    and we changed that error to warning also still we are getting that error message.
    how to stopthis error message.

    hi actually not for serial number check.
    there is a Z field in serial number master which is used for SIM number.
    that SIM number will be validated with available SIM number from another Z table.
    after this SIM error system is throughing this VL621 error after transaction terminated message.

  • Error while doing the return delivery

    Hi Experts,
    I had created an PO with describe requirement for 50 quantity and did partial confirmation of 30 quantity.
    While doing the return delivery for 10 quantity system is throwing error
    Line 1: No goods receipt possible for purchase order 4200051444 00001
    When tried doing the same process in ECC, the return delivery is posted without error.
    We were able to do the return delivery earlier. Can anybody throw light on, for the possible reason for this error.
    Your early response is appreciated.
    Regards,
    ASGMDM

    HI,
    This is due to anyone of the following :
    01. No further confirmation expected button is checked while doing confirmation for quantity 30. Please check the same in PO, if it is checked please uncheck the same so that you can do further confirmations.
    02.Please check the confirmation status of 30 quanityt which you posted earlier. It should be having Posted in Backend. If it is not, then you cannot create return delivery for the same. Also please note that Back end GR document number for 30 quantity should be updated in the table BBP_PDBEH under the field BE_OBJECT_ID.
    Thanks
    Rajesh K

  • Reg: while doing the MIGO

    Hi All,
    while doing the migowith plant 2311 in the po but  i am getting the following error.
    change the plant to 2322 but my plant is 2311.
    Thanks
    siva

    hi
    check PO for which plant it was raised it may be for 2322
    While doing just enter PO number..also check whethere UR po contains single or multiple plants
    Vishal..

  • OM vision India Hyderabad---exception while doing the ship confirm

    order management vision India Hyderabad ----we are getting the exception while doing the ship confirm the exceptions are shown below:
    Order: 20041 customer: C2il_customer Item: XXBikeEngine Error: NO DATA FOUND
    Order: 20041 customer: C2il_customer Item: XXBikeEngine Error: NO DATA FOUND Transactions window: Pick and ship
    Errors
    Warning: Item on delivery detail 3962489 does not have pre-specified weight and volume.
    Warning: Delivery 3773383 has null Weight
    Error: Bill of Lading Number could not be generated because the ship method code was not selected for the trip 3129358.
    Warning: Bill of Lading information could not be automatically created for delivery 3773383.
    Submitted 4 out of 4 documents for this document set. (REQ_IDS=5807692, 5807693, 5807694, 5807695)
    Warning: Failed to submit document set for delivery 3773383
    Warning: 1 deliveries will be marked as Confirmed.
    Warning: Some deliveries selected for Ship Confirm have errors or warnings.
    i am grateful if any one can provide suggestion on the issue.....

    Can you please share the documents and suggestions for R12Have you reviewed all the docs referenced above?
    actually all are working fine in normal vision operations,and we are facing the exceptions while we are doing in OM vision India Hyderabad.
    is there any setups do we configured for the OM vision India Hyderabad.if you can share any information on that it will be helpful...If the docs referenced above and Oracle Documentation http://download.oracle.com/docs/cd/B53825_08/current/html/docset.html do not help, then I would suggest you log a SR.
    Thanks,
    Hussein

  • Error While doing the Asset Credit Memo -ABGL

    HI,
    While doing the Asset Credit Memo -ABGL,i am getting the below error.Kindly help me with your inputs.
    Balance for transaction type group 10 negative for the area 01
    Message no. AA629
    Asset affected: 406000000004-0000
    Diagnosis
    With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
    System response
    The system rejects this posting.
    Procedure
    Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
    Thanks
    Supriya

    Check your config in OABN / OADB
    The depriciation area 01 can allow you post values only postive .. in OADB
    it has maintained Acquisition values Postive or zero values and net book
    values has miantained Postive or 0 values. so based on this setting u cannt
    post any negative values for this asset.

  • Error while doing the Usage Decision in transaction QA32

    Hello Friends,
    While doing the goods receipt for customer returns from customer, system generated a inspection lot with inspection type 06.
    So in QA32 transaction, system is showing that inspection lot, but in same screen, against the column InspPlan: Material, system is not showing any entry.
    Later on after analysis, i found that no inspection plan was assinged to the material, Plant for which that inspection lot was created. When i checked that inpection lot in transaction QA03, in Insp. Specifications tab, agaisnt the Assigned Specification section, system was not showing any entry in fields Group, Group Counter, Plant, Usage.
    And against that inspection lot,status CRTD, PREQ, CHCR are active.
    Because of  which, when user is trying to do the UD against this lot system throwing the error message as Status check error.
    When i checked again i found that status CRTD is throwing the error message.
    Hence friend, i want to do the Usage decision  for that inspection lot than how to do?
    Now user has assigned the material, plant to the inspection plan in QP02.
    Should i go to QA02 transaction, and in Insp. Specification tab, for fields group, group counter, usage, Plant, maintain the values?
    Will this allow me to do the usage decision against the inspection lot which got generated when no inspection plan was assingned to that material, plant?
    Waiting for your valuable inputs.

    For Result Recording and Ud the inspection lot status must be REL as u told ur status is CRTD it Mean Some master
    is missing in inspection lot,generally inspection plan for that u run QA02 enter inspection lot no go to specification tab
    there a button assigned specification there click on that as u click on button u will find that plan for above material copied to lot and it will show u plan detail line group and group counter no.
    then go to next screen Sample if sample management is active and click on sample then system will calculate sample size then save ur lot. it would get Status As REL now ui can enter result or take UD
    for QM setting Refer
    http://sap-questions.blogspot.com/

  • Error in WBS element while doing the purchase requisition

    Dear All,
    While doing the purchase requisition in ps
    the error is : Item 010 WBS element IN05-PR09-16 . 04 budget exceeded.
    Kindly parovide any solution.
    Best Regards,
    Venkat.

    Hi Venkar,
    Check the available budget against WBSE - IN05-PR09-16 . 04 (S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned ), and the PR amount. Available Budget should be more than PR amount. Based on the tolerance limits set for the  budget profile, maintain the Current Budget with budget updates and try to create a PR accordingly.
    Hope this solves your problem !!
    Br
    Hari.
    Edited by: Hari Krishna Kudaravalli on Aug 20, 2009 3:25 PM

  • Error while doing the confirmation by COR6N

    Hello Friends,
    While doing the confirmation by  T.C COR6N,in that screen i gave the process order no. and the phase no. and the posting date only and pressed enter, after that system thrown the error message "  Incorrect Resource entered " , Message no. S1333.
    Diagnosis
    This message is dynamically created, no more information possible.
    Actually by default from the process order system takes the resource.Here in COR6N screen i haven't given the resource than also system is giving the error message.
    Thanking you guys in advance.

    PLease check in the master data, Whether you have mentioned the resource..
    Foe Example, In discrete manufacturing, In the routing , we will give the workcenter which will be copied to the production order...
    Similarly please check and revert..
    karthick

  • Process Order Warning Message while doing the Goods Receipt

    Dear All,
    While doing the GR against process order via t.code MB31, we are getting a warning message which reads u201CProduction date of bch 110420 (17.06.2011) does not match the prod. date entered (26.08.2011)u201D this happens only if the batch number already exists in the system for the same material code , in this scenario if the user ignores the warning message & posts the document the existing batch number production date also will be over written with current/inputted manufacturing dateu2026 this will collapse the batch traceability. Is there a way to customize where we can have a different production date for same batch number?..
    For example:
    Batch Number: ABCD
    Production date 10.02.2011
    Batch Number: ABCD
    Production date 11.02.2011
    Batch Number: ABCD
    Production date 12.02.2011
    Regards,
    Sivanandan

    I'm sorry to say that I find your requirement to be absolutely not logical; a batch is, by definition, a homogenous quantity of a material, that you want to separate by it's characteristics from other, different, quantities of the same material.
    If you decided that manufacturing date is a characteristic of the batch, then it has to be unique for one batch.
    So, as I see it, you have two options: either decide that manufacturing date is not important and do without, or have different batches for the different dates.

  • Problem while doing the Cheque print through f-58

    Dear Team,
    I am encountering an issue while doing the Transaction through F-58 System is generating the cheeque print with coma instead of decimals i.e instead of 1,00,000.00 its comming as 1.000.000,00.
    Please advice how to correct this.
    Thanks for the consideration.
    Regards,
    Suma Nalluri.

    Dear Nambi,
    I have checked the settings there evry thing is fine.Still i am facing the same issue. I do not understand may be due to any bug .Please advice.
    Regards,
    Suma.

  • Auto Check Number printing

    Hi experts,
    We are using SAP Business one 2007 B PL 015. we have used copy express for pushing master data from one database to another. The newley configured system has a challenge. we have not configured the auto check number but when i enter check number manually in out going payments and add the document the check number remains the same,but when i go for checks for payment and priny my check system is automatically changing my check number and printing. The check number mentioned manually is vanished and the new check number  is saved in out going payment.
    Can any one help me out in resolving this issue ASAP.
    thanks in advance.
    Regards,
    Nani

    Hi Gordon,
    Earlier also it was manual and now also they are using manual but system is automatically pulling the next check number. To test that i had created a new database and posted an outgoing payment system is automatically updating the check  number with 1. The issue is S1 so any one please help me to resolve this. Iam thinking to post to service.SAP . shall i bcoz iam unable to find the solution to this issue.
    Regards,
    Nani

  • While doing the backup via iTune, my contacts in iPhone AND iPad have been completely wiped out. They are still all available on my Address Book on my Mac. Any idea what happened and how to resolve this ?

    While doing the backup via iTune, my contacts in iPhone AND iPad have been completely wiped out. They are still all available on my Address Book on my Mac. Any idea what happened and how to resolve this ?

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Check number confirmation window does not appear and checks become confirmed automatically

    We have updated to SAP 9.10.105 PL 00,
    and we have two issues with check printing, first when we print check we do not receive a confirmation window and all of the checks show as being confirmed. as soon as be print checks in the payment wizard after the checks have printed we than get an error message.
    "no matching records found 'checks for payment' (OCHO) (ODBC 2028) [message 131-183]
    the second problem is if I set over flow to blank paper, it will only print one check at a time, and i still do not receive a confirmation window.
    I am not sure if the original patch for 8.8 was left out of the 9.1 release.

    Thanks for this, I found this after posting a message with SAP Support.  Just a heads up, they consider it as 'Consulting' function not an 'Application Error' so they will not be a fix.  We'll just need to know to make sure users know to un-check this Box. 
    SAP Note: 0001422688 - Print on Blank Paper checkbox on Checks for Payment
    Symptom
    Scenario 1:
    Check Number Confirmation window does not pop up after Checks have been printed.
    You might receive the following error message:
    'No matching record found 'Checks for Payment' (OCHO) (ODBC-2028) [Message 131-183]'.
    Scenario 2:
    User is not able to print batches of Checks either via Payment Wizard or via Document Printing and
    the Cheque Number Confirmation window does not pop up.
    Cause
    Consulting
    Solution
    The issue could be resolved by uncheck Print on Blank Paper on Banking -> Outgoing Payments ->
    Cheques for Payments
    'Print on Blank Paper' setting on Checks for Payment is saved per user
    SAP Note:  0001059752 - Printing Checks for Payment Skipping the Confirmation Screen
    Symptom
    Check Number Confirmation window does not appear and the check automatically get confirmed.
    Reproducing the issue
    Scenario:
    Print a Check for Payment Via Document Printing or Directly for the Check for Paymet screen (under
    Banking > Outgoing Payments)
    Expected Results:
    The Check Number Confirmation screen pops-up.
    Actual Results:
    Check Number Confirmation screen is skipped
    Cause
    Consulting
    Solution
    If the option 'Print on Blank Paper' is ticked, the Checks Number
    Confirmation window will not pop-up.
    Go through the following steps and check the settings:
    1. Go to Administration -> System Initialization -> Print Preferences -> Per Document tab,
    Document: Check for Payment. Check if the option 'Print on: Blank Paper' is ticked.
    2. In Check for Payment document check whether the tick box 'Print on Blank Paper' is ticked.
    3. Go to Administration-> Setup-> Banking-> House Bank Accounts. Check in the 'Paper Type' column
    if the option Blank Paper is chosen.

  • Components Quantity Increased while doing the costing second run in 2011

    Hi,
    While doing the second costing run in same year (2011), we found there was a change in components quantity (increased) and this is not exaptable / wrong.
    dispite the fact that we did not make any change in the BOM of this SKU between the two calculations and there is no cost lot changes. There is no Price change also.
    Can any one explain, What are all the possibilities to increase the component quantities.
    Thanks in Advance
    Regards,
    Kumar

    Hi Kumar
    Check if there is % Consumption scrap in material master data and BOM item.
    I believe this is the only way you can increase consumption without changing the quantities in BOM.
    Regards.

Maybe you are looking for