HUs in OD - at a non-HU storage location

On creating HU in OD, the OD are created at non-HU storage location, this is a problem creating subsequent ID on the same.
Any idea ??

Hi Lokesh.
First pack the product as you want in pack storage type and then move the HU to HU storage type.
Step 1 >>/scwm/adhoc to move mat to pack storage type.
step 2 >> pack the product in HU
step 3>> move HU to HU req storage type = /scwm/adhu.
Regards
Suraj

Similar Messages

Auto-copy putaway quantity in Inbound for Non-WMS storage location

Dear All SAP Gurus,
I need to create an inbound delivery document for non-WM managed storage location and "copy" the quantity into the "putaway quantity" field automatically. Is there any setting to do this automatic assignment? As far as I know, if the storage location is non-WM managed, we usually need to manually enter the putaway quantity as part of the verification process during the PGR (goods receipt).
Please help.
Thank you and appreciated for your efforts.
Best Regards,
Edwin

Dear All,
Before this, I can't find any similar topic posted before, perhaps I was using an incorrect/not-so-meaningful keywords (although I've tried a lot of keywords). However, I've finally found the same topic in the following link. Anyone who is interested, may proceed to the following link.
Re: Regarding Automatic Picking Setting in Deliveries
Regards,
Edwin Fu

UD for a Material in HU-Storage location

Hi Gurus,
I have situation where Stock posting tab is not coming while doing the UD for a material
Process flow is below:
1. Creation/Release of Process - Inspection lot get created since early lot creation status REL CALC
2. GR of Process Order is done in MIGO in Hu storage location
3. Inbound Delivery is created (WM integration)
4. Inbound Delivery is processed with TR creation/Confirmation
5. Stock can be seen in Q under HU active storage location & Material document is created in IM . Inspection lot status is same
6. Result recording is done against Lot Status INSP RREC
7. While doing UD. Tab for Stock posting is missing. Status UD ICCO CLAS STUP
This inspection type has following settings: - tick post to insp stock, Insp with task list , early lot creation , auto UD etc
Not sure what I am missing some settings since that is HU storage location
Please guide
Thanks,
Ishwar

Hi Yogini,
Thanks for that .
I tested as per suggestion but that is also not working basically no inspection lot is getting created for the GR after completion of WM transaction
I have tested my senerio for non-HU storage location (doing GR in no-HU storage location ) & that works correctly . After UD i was able to see tab for stock posting & stock get posted successfully
I think need expert advice who has work on QM-WM integration part ... can we able to post the stock from Quality stock from HU storage location to unrestricted use using only IM transaction ( QA11/12 ) or do i need to perform some additional steps in WM ?
Thanks,
Ishwar

Create a WM managed storage location

I have created a new Storage location which I would like to use to transfer materials to a warehouse storage bin.
How do I make it so that a storage location is connected to my warehouse? This is so that I can use MIG to transfer materials from a non-wm storage location to this new wm storage location.
My end goal is to transfer materials from this wm storage location and put them in a storage bin.

Hi,
You need to assign the plant+storage location to a warehouse.
Go to SPRO -> Enterprise structure ->Assignment ->Logistics execution ->Assign warehouse number to plant/storage location.
Regards

Packing Instruction in storage location transfer (HUM)

Hello,
I have this request to create a (packing) Instruction for moving materials from a non HUM storage location to HU managed storage location for a particular item category of materials.
Can anyone please explain me how can Packing instruction be used in storage location transfer.
Thanks in advance,
Amit G

Hi,
POP1 - create packing instruction
POF1 - to determine the packing instruction
The Menu path is
SAP Easy Access - Logistics-central function-Handling unit management-Master data-Packing instructions
Pl. go the link
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/a44b7d9f3211d2858d0000e81ddea0/content.htm
help.sap.com/bp_autov1500/Auto_US/documentation/BP_Auto_Solution_Scope_V1.500_EN_US.doc

Storage Location for NON valuated material in MIGO

Hi friends ,
I have created a purchase order for NON-Valuated material (UNBW) with Account Assignment "K".I did check the material type UNBW configuration where only Value Update is checked for my Plant.
Now at the time of MIGO , system is asking for Storage lcoation (mandatory) and after MIGO system also updates quantity in Storage Location entered in MIGO.
while in normal cases (like ROH material type) , if we create Account Assigned PO ( like K) , system neither ask for Storage lcoation at the time of MIGO , nor system updates Qty at any storage location.
As per my understanding , if we create Purchase Order with account assignment K , system updates value in consumption and doesn't update Qty in stock (although material is stockable) .....which is simply like immediately issue of material to cost center.
Therefore wondering why system is updating Qty for NON-VALUATED material.
Does non valuated material means , POST value to Cost center (for account assignment K) and Update Qty in stock ?
Like in case of Account Assignment , value gets charged to WBS and qty gets updated as special stock "project"
All replies are welcome .....
Regards
Shrey

By definition UNBW's are ony qty updating and have no value assoicated with them. Since the system needs to stock this qty somewhere it by deafult asks for a Sloc.

Restore Database to non-ASM Storage - Issue with Bigfile Tablespace

I have been testing a restore of my prod database that uses ASM (and oracle managed files) for storage to a different server and non-ASM storage. Oracle version is 10g EE. My database has one bigfile tablespace and it's datafile is about 250GB. The restore fails and it has something to do with the bigfile tablespace.
Here is the rman restore script:
run
set newname for datafile 1 to '/ora01/db/ehr/system01.dbf';
set newname for datafile 2 to '/ora01/db/ehr/undotbs01.dbf';
set newname for datafile 3 to '/ora01/db/ehr/sysaux01.dbf';
set newname for datafile 4 to '/ora01/db/ehr/undotbs02.dbf';
set newname for datafile 5 to '/ora01/db/ehr/users01.dbf';
set newname for datafile 6 to '/ora01/db/ehr/apolloaud01.dbf';
set newname for datafile 7 to '/ora01/db/ehr/apollohist01.dbf';
set newname for datafile 8 to '/ora01/db/ehr/apolloidx01.dbf';
set newname for datafile 9 to '/ora01/db/ehr/apollotab01.dbf';
set newname for datafile 10 to '/ora01/db/ehr/apollotab02.dbf';
set newname for datafile 11 to '/ora02/db/ehr/apollolob01.dbf';
set newname for datafile 12 to '/ora01/db/ehr/apollofdb01.dbf';
set newname for datafile 13 to '/ora01/db/ehr/apolloidx02.dbf';
set newname for datafile 14 to '/ora01/db/ehr/apolloidx03.dbf';
set newname for datafile 15 to '/ora01/db/ehr/apolloaud02.dbf';
set newname for datafile 16 to '/ora01/db/ehr/apollotab03.dbf';
set until sequence 60298 thread 2;
restore database;
switch datafile all;
recover database;
Datafile 11 is the datafile in the bigfile tablespace. Here are the weird things about the restore:
1. The restore output shows this:
creating datafile fno=11 name=/ora02/db/ehr/apollolob01.dbf
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /ora01/db/ehr/system01.dbf
restoring datafile 00002 to /ora01/db/ehr/undotbs01.dbf
restoring datafile 00003 to /ora01/db/ehr/sysaux01.dbf
restoring datafile 00004 to /ora01/db/ehr/undotbs02.dbf
restoring datafile 00005 to /ora01/db/ehr/users01.dbf
restoring datafile 00006 to /ora01/db/ehr/apolloaud01.dbf
restoring datafile 00007 to /ora01/db/ehr/apollohist01.dbf
restoring datafile 00008 to /ora01/db/ehr/apolloidx01.dbf
restoring datafile 00009 to /ora01/db/ehr/apollotab01.dbf
restoring datafile 00010 to /ora01/db/ehr/apollotab02.dbf
restoring datafile 00012 to /ora01/db/ehr/apollofdb01.dbf
restoring datafile 00013 to /ora01/db/ehr/apolloidx02.dbf
restoring datafile 00014 to /ora01/db/ehr/apolloidx03.dbf
restoring datafile 00015 to /ora01/db/ehr/apolloaud02.dbf
restoring datafile 00016 to /ora01/db/ehr/apollotab03.dbf
Why at the beginning is it "creating" datafile 11? Then it doesnt even say it is "restoring" that datafile. Only restoring datafiles 1,2,3,4,5,6,7,8,9,10,12,13,14,15, and 16.
When it creates datafile 11 it is only 26GB, that is much smaller than it should be according to v$datafile view on source prod database. Also even though it says it is creating datafile 11 as /ora02/db/ehr/apollolob01.dbf it actually creates it as an oracle managed file at /ora02/db/ehr/EHR/datafile/o1_mf_apollolo_6crxyqs2_.dbf
After the datafiles are restored the "switch datafile all" command fails:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of switch command at 10/18/2010 13:58:37
ORA-19625: error identifying file /ora02/db/ehr/apollolob01.dbf
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
So my question is how do I get this database restored to non-ASM (and non omf)?

So I tried using a different scn with my "set until scn #####" then the restore created 2 datafiles. The datafile for apollolob and apollotab02.dbf. So I think I have narrowed the problem to be that I am not using the correct scn number so RMAN can successfully restore those datafiles and recreates them instead. How do I find the correct scn to use to do a successful restore of the entire database? I have seen different methods on the web, but cant figure it out. Ive used "select archivelog_change#-1 from v$database;" and I also did "list backup of archivelog all" and used the latest sequence number. How can I find the correct scn to use so the entire database will restore?
Here is the output of "list backup":
List of Backup Sets
===================
BS Key Size Device Type Elapsed Time Completion Time
19724 41.12M DISK 00:00:10 14-OCT-10
BP Key: 65840 Status: AVAILABLE Compressed: YES Tag: TAG20101014T210022
Piece Name: /mnt/migrate/rman/EHR_dbid3632734257_set113195_piece1_copy1_20101014
List of Archived Logs in backup set 19724
Thrd Seq Low SCN Low Time Next SCN Next Time
1 50439 3230234843 14-OCT-10 3230268282 14-OCT-10
1 50440 3230268282 14-OCT-10 3230286806 14-OCT-10
2 60280 3230234852 14-OCT-10 3230251419 14-OCT-10
2 60281 3230251419 14-OCT-10 3230268263 14-OCT-10
2 60282 3230268263 14-OCT-10 3230286809 14-OCT-10
BS Key Type LV Size Device Type Elapsed Time Completion Time
19725 Full 126.40G DISK 09:11:51 15-OCT-10
List of Datafiles in backup set 19725
File LV Type Ckp SCN Ckp Time Name
1 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/system.625.609259453
2 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/undotbs1.620.609259461
3 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/sysaux.768.609259463
4 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/undotbs2.632.609259467
5 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/users.257.609259471
6 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/apolloaud.316.619537285
7 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/apollohist.629.619538155
8 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/apolloidx.312.619538169
9 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/apollotab.276.619538487
10 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/apollotab.576.619539331
11 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/apollolob.570.619539593
12 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/apollofdb.750.645974339
13 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/apolloidx.429.651171265
14 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/apolloidx.705.688680793
15 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/apolloaud.747.699632315
16 Full 3230287009 14-OCT-10 +DATA/ehr/datafile/apollotab.330.715622123
Backup Set Copy #1 of backup set 19725
Device Type Elapsed Time Completion Time Compressed Tag
DISK 09:11:51 20-OCT-10 YES TAG20101014T210039
List of Backup Pieces for backup set 19725 Copy #1
BP Key Pc# Status Piece Name
65851 1 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece1_copy1_20101014
65862 2 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece2_copy1_20101014
65873 3 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece3_copy1_20101014
65884 4 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece4_copy1_20101014
65895 5 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece5_copy1_20101014
65901 6 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece6_copy1_20101014
65902 7 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece7_copy1_20101014
65903 8 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece8_copy1_20101014
65904 9 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece9_copy1_20101014
65841 10 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece10_copy1_20101014
65842 11 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece11_copy1_20101014
65843 12 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece12_copy1_20101014
65844 13 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece13_copy1_20101014
65845 14 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece14_copy1_20101014
65846 15 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece15_copy1_20101014
65847 16 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece16_copy1_20101014
65848 17 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece17_copy1_20101014
65849 18 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece18_copy1_20101014
65850 19 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece19_copy1_20101014
65852 20 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece20_copy1_20101014
65853 21 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece21_copy1_20101014
65854 22 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece22_copy1_20101015
65855 23 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece23_copy1_20101015
65856 24 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece24_copy1_20101015
65857 25 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece25_copy1_20101015
65858 26 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece26_copy1_20101015
65859 27 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece27_copy1_20101015
65860 28 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece28_copy1_20101015
65861 29 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece29_copy1_20101015
65863 30 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece30_copy1_20101015
65864 31 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece31_copy1_20101015
65865 32 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece32_copy1_20101015
65866 33 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece33_copy1_20101015
65867 34 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece34_copy1_20101015
65868 35 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece35_copy1_20101015
65869 36 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece36_copy1_20101015
65870 37 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece37_copy1_20101015
65871 38 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece38_copy1_20101015
65872 39 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece39_copy1_20101015
65874 40 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece40_copy1_20101015
65875 41 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece41_copy1_20101015
65876 42 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece42_copy1_20101015
65877 43 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece43_copy1_20101015
65878 44 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece44_copy1_20101015
65879 45 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece45_copy1_20101015
65880 46 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece46_copy1_20101015
65881 47 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece47_copy1_20101015
65882 48 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece48_copy1_20101015
65883 49 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece49_copy1_20101015
65885 50 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece50_copy1_20101015
65886 51 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece51_copy1_20101015
65887 52 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece52_copy1_20101015
65888 53 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece53_copy1_20101015
65889 54 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece54_copy1_20101015
65890 55 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece55_copy1_20101015
65891 56 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece56_copy1_20101015
65892 57 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece57_copy1_20101015
65893 58 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece58_copy1_20101015
65894 59 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece59_copy1_20101015
65896 60 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece60_copy1_20101015
65897 61 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece61_copy1_20101015
65898 62 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece62_copy1_20101015
65899 63 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece63_copy1_20101015
65900 64 AVAILABLE /mnt/migrate/rman/EHR_dbid3632734257_set113196_piece64_copy1_20101015
BS Key Size Device Type Elapsed Time Completion Time
19726 228.10M DISK 00:00:49 15-OCT-10
BP Key: 65905 Status: AVAILABLE Compressed: YES Tag: TAG20101015T061242
Piece Name: /mnt/migrate/rman/EHR_dbid3632734257_set113197_piece1_copy1_20101015
List of Archived Logs in backup set 19726
Thrd Seq Low SCN Low Time Next SCN Next Time
1 50441 3230286806 14-OCT-10 3230331993 14-OCT-10
1 50442 3230331993 14-OCT-10 3230401945 14-OCT-10
1 50443 3230401945 14-OCT-10 3230469794 15-OCT-10
1 50444 3230469794 15-OCT-10 3230555010 15-OCT-10
1 50445 3230555010 15-OCT-10 3230618396 15-OCT-10
1 50446 3230618396 15-OCT-10 3230695020 15-OCT-10
2 60283 3230286809 14-OCT-10 3230304858 14-OCT-10
2 60284 3230304858 14-OCT-10 3230330891 14-OCT-10
2 60285 3230330891 14-OCT-10 3230354275 14-OCT-10
2 60286 3230354275 14-OCT-10 3230366292 14-OCT-10
2 60287 3230366292 14-OCT-10 3230399805 14-OCT-10
2 60288 3230399805 14-OCT-10 3230423577 14-OCT-10
2 60289 3230423577 14-OCT-10 3230446176 15-OCT-10
2 60290 3230446176 15-OCT-10 3230469756 15-OCT-10
2 60291 3230469756 15-OCT-10 3230496786 15-OCT-10
2 60292 3230496786 15-OCT-10 3230524710 15-OCT-10
2 60293 3230524710 15-OCT-10 3230554981 15-OCT-10
2 60294 3230554981 15-OCT-10 3230583802 15-OCT-10
2 60295 3230583802 15-OCT-10 3230610465 15-OCT-10
2 60296 3230610465 15-OCT-10 3230617887 15-OCT-10
2 60297 3230617887 15-OCT-10 3230673207 15-OCT-10
2 60298 3230673207 15-OCT-10 3230695022 15-OCT-10

Non storaged material in Storage Location after mov 653

I have a non storage material.
when the return delivery picking was done SAP let to put a storage location. for this Delivery item category wit has not flagged "Do Not Check Storage Location". So it has to be checked. Its also true that we have Storage location is absolutely necessary, so without storage locatin we cant deliver, but we should have an error message and not let us deliver using a storage location when its a not storaged material.
And the problem is that when you have the material in the storage location you cant do nothing because the material has no storage data.

Hi
For the Return delivery , delivery item category is not flagged with the feild "Do Not Check Storage Location " . It is not checked because a Returns order are mostly created wrf to sales order / billing document/delivery document. So once you copy the data to the returns order and when you do Post Goods Receipt then at that time there is no need to copy the sloc.
But ,if the material doesn't have storage data then we cant retrieve how much stock is available in storage locations. So we have to run the report to know how much stock is available in the storage location
Regards
Srinath

How to create a local, non-clustered storage pool

Hello,
I have setup a two-node Failover Cluster, with a shared SAS DAS. So far so good.
One of the nodes also has internal disks that I wish to use for system backups.
This storage pool should not be clustered, as the disks cannot be seen from the other node. The trouble is that as soon as I create the pool it gets added to the cluster (in failed state).
In fact, the "Storage Pools" window in the server manager will only show me the "clustered storage spaces", with my internal disks in the Primordial pool.
Get-StorageSubSystem will show me both subsystems (Clustered Storage Space on ... + Storage Spaces on node-1) but fails to create a storage pool on the "local" subsystem.
How can I create a local, non clustered storage pool on internal disks ?
Cheers
alex

Hi,
SpackTime_ is right, the DA storage usually for the localdata backup, but if you want to use for remote computer backup, you can share a floder then you can storage your backup, but also that backup won't work the shared computer crash.
The simlar thread:
Schedule Backup to Remote Shared Folder
http://social.technet.microsoft.com/Forums/windowsserver/en-US/726d3765-5f82-4590-b970-d45e17412281/schedule-backup-to-remote-shared-folder?forum=winserverfiles
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Repair flow (material non valuated) must be transferred to storage location

Hi,
We create an Repair Sales Order.
Then we receive the material (Mvt 451) in non val. stock.
Then we like to transfer to the shipping storloc. but should not be valuated. From the shipping stor.loc. we would like to create a delivery and send the repaired material back.
How can we transfer the received material (mvt 451) to a storage location without adding value. Which movement type can we use?
Thank you,
Eric.

Hi,
We receive the material with mvt 451 in return stock.
So it is initial not available for transfer. But if I transfer it then it gets valuated. This is what we do not want. Which movement type do I need to use (or more steps) to move it from 451 return stock to an other storagelocation without value creation.
Thank you,
Eric.

Dell PowerEdge Servers with non-dell storage

yes I do I have a few 2950's that I run with WD red drives they work fine. moslty that stuff is to keep warranties upheld and to keep repeat customers coming back. its up to you how much you want to deal with. some of the raid functions and raid configurations may not be available if they have custom firmware from Xbyte or require custom firmware installed.personally if the server hardware is past dell's warranty I am using the cheapest most reliable drives I can get my hands on because at that point its on me any way. that also means wiping the PERC controller to default and rolling with default settings and then modifying them to what I need.Then again it goes back to how much responsibility do you want on you for this hardware. if you want as little as possible play by your distributors rules and have little or take it all yourself...

Hi,
I am pricing out some refurbished Dell PowerEdge servers primarily from xbyte.com and received feedback from them that they are extremely apprehensive about using non-dell storage in the server due to the custom firmware in the drives themselves. That being said they offer non-dell hard drives with custom xbyte firmware which apparently work... and yet they will still report a non-mission critical error in the manager.
Does anyone run production servers with 3rd party drives? If it is not recommended to do so, does anyone run the "Xbyte drive firmware" in production servers?
Thanks!
This topic first appeared in the Spiceworks Community

Does Xserve with OS 10.6.4 support multipath on non-apple storage now?

Hi,
We are installing 3 Xserves and a non-apple storage (Compellent, dual controller) at customer site, Xserve is running MAC OS 10.6.4 and have installed Xsan. One fibre cable on Xserve is connected to the fibre switch.
During test we found that if LUNs are mapped from multiple WWPNs in one WWNN, The volumes create by Xsan will have link communication and performance issue. We queried Compellent Support and got answered that Apple server doesn't support multipathing on non-apple storage so far, so we have to use only one active link per WWNN.
Is that true and is there any solution for the issue?
Thanks.

Thanks for your reply Colin,
In the Compellent Tech Tip I found following description:
MacOS may incorrectly issue commands to all Storage Center Ports with the same World Wide Node Name (wwnn), even though the volume is only mapped out of a single Storage Center Port. Commands down invalid paths will be rejected by Storage Center. MacOS may not properly acknowledge that the commands were rejected. There will be data integrity issues if the MacOS does not properly acknowledge that commands failed.
All front end primary connections from a controller will have the same wwnn, but unique World Wide Port Names (wwpn or wwn). Each controller in a clustered controller system will have a unique wwnn. Front end reserve ports will have a different wwnn than the primaries.
This behavior has been seen with Storage Center 4.0.2 and 4.1.3 along with MacOS 10.5.3 and 10.5.4. This issue is assumed to exist with all versions of Storage Center and MacOS 1.5.2-1.5.4. It could possibly affect earlier versions of MacOS.
WORKAROUND
The workaround for this issue is to ensure that a Mac Server can only view one front end primary port for each controller. This can be done through zoning. For MacOS, it is recommended that zones are setup so that a Mac Server can only see a single front end primary connection from each controller. Only a single Mac port should be used. At this time, Apple does not support multipathing with non-Apple Storage. A volume should only be mapped out of a single port on Storage Center to a single port on the Mac Server.
What my issue is I connected two active front end ports on each controller to Xserve, that made Xserve "see" two WWPNs in the same WWNN, So regarding the content above, I should connect only one active front end port to the Xserve on each controller. Do you agree?
Thanks!

Bin to bin transfer from SU managed storage type to NON SU storage type

Hi Experts ,
Kindly guide as how i can perform Bin to bin transfer from SU managed storage type to NON SU storage type
Thanks
Jinoy

There is no particular technique for this. You can use single or collective method (LT01 or LT10).
Provide the source SU and destination storage type and bin and save the TO. Your transfer will be complete.
The SU number will be lost because you have moved the stock to a non SU storage type.
Regards,
Aroop

Componets backflush out of Storage location [non WM]. WM PP active

We have implemented WM and activated interface WM/PP.
Finished good assigned to routing, routing has operation, operation assigned to supply area
All components are assigned to operation
Due to this system is deriving ONE storage location for all components [Storage location assigned to supply area]
We have few components which needs to be backflushed out of a different storage location [Non WM]
Though i entered this storage location in its material master, system allways deriving Storage location assigned to supply area
Please help how we can ensure components backflush of storage location different than one assigned to supply area
Thanks in advance

Below are the solutions
1. Note 126881 - Production supply area determination.pdf
2. Seperate PSA for each storage location
3. do not extend materials in PSA storage location then system will bring in storage location from material master

SQL Server 2012 AlwaysOn for Multi-subnet geographical HA solution steps -- NON-Shared storage,standalone servers

1.Can any one provide the detailed steps for multi-subnet HA for Always ON Groups.
--SQL Server 2012 AlwaysOn for Multi-subnet geographical HA solution steps
2.Do we need VLAN or not for SQL Server 2012 on win 2012 ? provide details for this VLAN required or not.
--I read MS links, sql server 2012 and above VLAN not required.
Env:
SQL Server 2012
Windows 2012 R2(2 servers different location)
Non-Shared storage (stand-alone servers)
Always ON Availability Group
I have seen white papers,but did not have detail step by steps.
Thanks

Hi SQLDBA321,
As your post, SQL Server 2012 or higher version has removed that requirement of virtual local area network (VLAN). For more details, please review this similar blog:
What you need for a Multi Subnet Configuration for AlwaysOn FCI in SQL Server 2012.
And you can perform the steps in the following similar blog to set up an AlwaysOn Availability Group with multiple subnets.
http://www.patrickkeisler.com/2013/07/setup-availability-group-with-multiple.html
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

HUs in OD - at a non-HU storage location

Similar Messages

Maybe you are looking for