Automatic creation of Purchasing info record while creating PO.

Dear all,
We have one issue. When a purchase order is created due to the Infoupdate checkbox in material data tab is on, a purchasing inforecord gets generated automatically. But it is generated with price as Rs. 0. Is there any ways by which the automatically generated inforecord will have the price equal to the price of PO.
Thanks in advance.

It will have Zero price , but go to Environment > Order Price History..
there you can see the PO Price..

Similar Messages

Automatic creation of purchase info record

Hi friends
I could not find check box in RFQ (ME41!N)or in Quotation (ME47N) for updating/automatic creation of purchase info record.
Thanks
Sunny

Hi,
you can maintain the info update for the required quotation through ME47.choose the required line item and click on the "item detail" icon and put the necessary value for info update:
1-     No update
2-A     Update with or without plant
3-B     Update with plant (if no plant ban)
4-C     Update without plant (if no plant requirement)
Indicator: Update Info Record
Determines whether:
The purchasing info record for this vendor and material is to refer to this PO item, and
The item is to be valid for the entire purchasing organization or just for the plant.
Use
The indicator determines which prices and conditions are suggested in future PO items.
Prices and conditions can apply to an entire purchasing organization or to a single plant within a purchasing organization.
For example, if you create a purchase order for a plant for which an info record has been defined at plant level, the purchase order is based on the conditions in the plant info record and not on the conditions that apply to the purchasing organization.
Procedure
Enter the relevant plant key:
A
Updating of the document number is effected at plant level as long as there is a purchasing info record at plant level. Otherwise the document number is updated at purchasing organization level.
B
Updating is effected at plant level if plant conditions are allowed for the plant.
C
Updating is effected without plant data if plant conditions are not necessary for the plant.
Dependencies
The level at which updating of the document number may be effected is defined for each plant.
Hope this will clarify your query.
Thanks & Regards,
Bijay Pradhan

CREATION OF PURCHASE INFO RECORDS

Hi All ,
Can anybody tell me how to use standard program RM06IBI0 for creation of purchase info record.
Thanks in advance,
Best Regards,
Sugeet.

HI
I think it will be easy for you to handle it through an EXIT where you check a particular role or field entry for allowing a user to proceed further in creation of Info Record
Regards
Virender Singh

BAPI for creation of Purchasing info record

Hi SAPians,
Greetings......
Can you help me out in giving the BAPI for the creation of Purchasing Info record (ME11) .
Thanks in advance,
Lekha.

Hi ,
You people have suggested me to use RM06IBI0 this program.
I want to know in what way it can help me.
Thankyou in advance,
Lekha.

Creation of purchase info record

Hi any body pls let me know how we can create purchase info record(me11)
i am an abaper i want to know the functionality in that
let me know the mandatory fields because i have an requirement to create it using
lsmw
thanks in advance

hi,
try abap RM06IBI0
A.

Mass Creation of Purchasing Info Records

Hi all,
we want to change the vendor for a certain amount of articles (old vendor e.g. 102, new vendor e.g. 768).
To order the articles (maybe approx. 1000) by the new vendor, we need to create new Purchasing Info Record (for vendor 768) for every article bought by vendor 102.
Is there a standard transaction to handle this? MASS_EINE doesn't seem to fit to my problem.
Regards,
Tobias

Hi Tobias,
You need to go for creating new Inforecord for Article, Vendor, Porg and Site Combination .
You should not go for Mass Maintanace for changing vendor.
Go for Uploading by LSMW or BDC for ME11 tcode.
Regards,
Selvakumar. M

Creation of purchase info records using me11 and me12

are there any bapis for creation / update of purchase info records with pricing conditions using transaction me11 and me12 ?
plz tell me ?
Moderator message: please search for available information before asking.
locked by: Thomas Zloch on Aug 10, 2010 2:52 PM

looks like it accepted A017.
Why did you choose basis type COND_A04 ?
As this one is very special for long material numbers ( more than 18 digit material numbers) do you have such?
E1VFSCAH is the Scale header in case of dimension specific scales. do you have such?
Just try it with COND_A01

Display info records while creating a shopping cart in Extended Classic

Hi ,
i am working on Extended Classic Scenario in SRM 5.0.
I have created an info record in R/3 Backend.
when i create a shopping cart with the relavant information system is not showing up the required info record that is maintained in the R/3 system.
Please respond to this problem ASAP.
Thanks,
mahesh

Hi,
See the foll threads:
Assign the Info-record to SOS automatically.
Re: Contract preference over PIR in SOS in Classic Scenario
BR,
Disha.
Do reward points for useful answers.

PURCHASE INFO RECORD TAX CODE UPDATION THROUGH PO

In Purchase info record tax code is alredy exist for one vendor and material.
while making new Purchase order for same vendor and material but tax code is differant then can tax code will not update automatic in purchase info record.
How to do automatic updation in purchase info record?

Hi,
The Tax code will be updated from the PO at the first time Info record created from the PO as per the Info update setting.
In your case as already with tax code an Info record exist as per standard the new tax code willn't get updated in to the existing info record. You have to change the new tax code in the info recordfrom the transaction ME12.
Regards
Eshwar H

Purchase Info Records

Hi
When I am going to create Purchase order at that time Purchase info records are created automatically.It is created based on purchase organisation.
While checking OMFI ,B Update with plant (if no plant ban) is set ,then why purchase info records are not created also with Plant code.
thanks in advance
Dev

Hi
That's why i take a new material code and create purchase order.
When i checked EINE table at that time it will create only one record with respect to purchase org. only.
Is there any config setting to create purchase info records based on Plant code?
Thanks
Dev
Edited by: SAPMM1985 on Jun 21, 2011 1:13 PM

Questions on Purchasing Info Record

Dear all,
Please help to clarify my doubt on the following :
1) Will purchasing info record be created automatically whenever we raised a PO?
or Do we need to do any setting in SAP?
2) During PO creation, can the Rem. shelf life field found in the Delivery Tab of the PO be updated with the Min. rem. shelf life found in Material Master instead coming from the Vendor-Purchasing Info Record?
3) Whenever I raised a PO, I realise that the InfoUpdate is always ticked. May I know is there any setting for this.
Thank you.

Hi,
1) Will purchasing info record be created automatically whenever we raised a PO?
PO will not be created automatically, you have to tick info update in PO. Then only Inforecord will be created.
or Do we need to do any setting in SAP?
In the Purchase order screen layout you have tick that info update field.
2) During PO creation, can the Rem. shelf life field found in the Delivery Tab of the PO be updated with the Min. rem. shelf life found in Material Master instead coming from the Vendor-Purchasing Info Record?
shelf life data is fetched from material master only.
3) Whenever I raised a PO, I realise that the InfoUpdate is always ticked. May I know is there any setting for this.
There is no setting for this you have set this field in the purchase order as info update then only it updates or creates info record.
Regards
Ravi shankar.

Material purchase info record

hi to all
please help me in this issue,
when i save the purchase order with material a purchase info record is creating with out plant , how can i overcome it
thanks & Regards
Reddy
Message was edited by:
k reddy

when i save the purchase order with material a purchase info record is creating with out plant , how can i overcome it <b>--->whats ur issue ?.</b>
Regards
Prabhu

Error occured while creating purchase info record in mm

sir,
while creating purchase info record an error occured while inserting net price. it said
NOT POSSIBLE TO DETERMINE A CONDITION TYPE FOR A PRICE
when it attempted to generate the time dependent condition for the price you entered the systeem was unable to determine a condition type, price determination is therefore not possible.
please inform me how to solve this problem.
thankyou

I think you are not using the stdard pricing becuse of that it is thrwing error
Ok First check your pricing procedure which your using for PO
than in that pricing procedure if you are using PB00 fro Gross price than you will have antoher pricing procedure attached to this condition.
check in M/06 for your gross price conditon
now did you assign the pricing procedure to vendor?
bottom line is somthing missing in your config.
Check all the config as below
Pricing Procedure:
In MM module, pricing procedure is used during RFQ and PO creation. Total value of material based on all addition and subtraction like discount, surcharge, tax, freight, etc. In this we are defining pricing procedure and linking to vendor and purchase department through the virtual schemas.
Following steps for pricing procedure as,
1. Define conditions.
2. Define pricing procedure.
3. Define virtual purchase organization and vendor.
4. Info Record.
Customization for Pricing Procedure :
1. Definition of Conditions :
/NMEK0-condition typeu2026condition types- definition (define for basic price, net price, discount, surcharge, tax etc.)
2. Defining pricing procedure :
/NMEK0- calculation schema-calculation schemasu2014New entries (Define procedure and put the conditions like formula so that final price will be net price / total value as per company requirement)
3. Linking pricing procedure to independent condition types.
/NMEK0-condition typeu2026condition types- definition for position for defined conditions (Enter the defined pricing procedure in the each independent conditions u201CPricing Procedureu201D box)
4. Defining Schema group for Vendor :
/NMEK0- calculation schema-schema groupsu2014vendoru2014New Entries.
5. Defining Schema group for Purchase Organization--- New entries.
/NMEK0- calculation schema- schema groups---- purchasing organization--- new entries.
6. Linking Virtual Purchase Organization to actual Purchase Organization.
/NMEK0- calculation schema- schema groups----- Assign P.Org. (in actual P.Org, enter virtual P.Org)
7. Linking Pricing procedure to virtual P.Org and virtual vendor :
/NMEK0- calculation schema- Determine Schema--- -Standard --- New entries (Enter virtual schema and P.Org. along with pricing procedure)
8. Linking virtual vendor to actual vendor-- /NXK02 then enter schema group vendor in Purchasing Data )
9. Info Records (/NME11)---- click on u201CPurch. Org. data1u201D and enter condition types and pricing procedure
What are the steps in pricing determination in MM? Condition, Access sequence and schema.
In the SAP MM Pricing is more important. Just yesterday I have completed the Pricing as I am doing the SAPMM now. I can give some light on this Topic, not 100%. After 2 days definitely some more I can share.
The Basic thing is Condition Technique. In which there are
1. Access Sequence 2. Condition Record 3. Condition Type 4. Condition Table.
A Access Sequence access a Condition Record of a Condition Type in a Condition Table is a Condition Technique.This is a simple logic
Here the Condition Type is very important like PB00, PBXX,RA01 etc.
In the background every Condition Type has its own defition means the purpose of the Condition Type like, is it for Pricing or Percentage, Quntity base, Accrual Feilds etc is to be defined to work this functions.
Normally we use the existing ones without any risk. But some cases, we have to Create a New Condition Types as per the organisation requirement.
The Pricing Schema is useful to minimise condition types while mention prices for Vendor on the basis of Pricing Schema which we defined according to organisation requirement.
The Pricing Schema means the calculations procedure of Condition Type.
Ex. RA01 - Discoount % is caclulated on PB00 - Gross Price means
RA01 is based on PB00 like that we have to define in the Pricing Schema
which makes easy to use in realtime.
Here PB00 has the Access Sequence - 0002.
But RA01 does not have the Access Sequence.Why because it is a dependent on PB00. But both are Condition Types.
In the system, by default some standard Scheme will be there at Vendor Schema Group in the Vendor Master Screen means the standard one is assigned which is very lengthy which may fullfil our requirement. But some cases which may not fullfil our requirement, in such we have to define.
For the configuration, I may not able to explain properly through here but will give some Idea.
Configuration: SPRO-IMG-Material Management- Purchasing- Conditions-Define Price Deternmination Process
1. Define Access Sequence
2. Define Condition Type
3. Defince Calculation Schema:- Here you have to define the Schema
Define Schema group
1. Define Schema Group vendor
2. Define Pricing Schema group
3. Schema group for Purchase Organisation
4. Assign Schema group to Purchase Organisation
Define Schema determination
1.define calculation schema for Standard purchase organisation
After completion of the Schema Group, we have to assign it to Vendors.
Then whenever we use any transaction with this Vendor, the concerned Schema will work as configured by us.
I think this will help you. Actually the Pricing is a vast. Becuase each Condition have its own importance and each Access Sequence have its own importance. So you need not bother about this. First you learn how to define the Calculation Schema through the above.
Here we can create many Calculation Schemas which can assign one schema to Local vendors
another schema to out side vendor one more schema to foreign vendors like that we can classify.

Automatic purchase info record

how do you create automatic purchase info record, what are the steps to do it, and how that helps in p2p process?

Hi,
While creating external purchasing documents ( like PO) in item details materials tab infoUpdate check box is there
Info record update
Determines whether the prices and conditions of this purchase order item are suggested in future PO items.
Use
Selecting InfoUpdate causes one of the following situations to occur:
        If just one info record (with or without plant) exists, it is updated.
        If no info record exists and "plant condition requirement" was specified in Customizing, an info record with plant is created. Otherwise, an info record without plant is created.
        If two info records exist (that is, one info record with plant and one without plant) the info record with plant is updated.
Dependencies
You can specify that prices and conditions in purchasing info records are only allowed at plant level in the Purchasing IMG, under Conditions -> Define Condition Control at Plant Level.
Other Purchasing documents Scheduling agreement, Quotations (me47) Choose the required line item and click on the "item detail" icon and put the necessary value for info update
Indicator: Update Info Record
Determines whether:
    The purchasing info record for this vendor and material is to refer to this PO item, and
    The item is to be valid for the entire purchasing organization or just for the plant.
Use
The indicator determines which prices and conditions are suggested in future PO items.
Prices and conditions can apply to an entire purchasing organization or to a single plant within a purchasing organization.
For example, if you create a purchase order for a plant for which an info record has been defined at plant level, the purchase order is based on the conditions in the plant info record and not on the conditions that apply to the purchasing organization.
Procedure
Enter the relevant plant key:
A
Updating of the document number is effected at plant level as long as there is a purchasing info record at plant level. Otherwise the document number is updated at purchasing organization level.
B
Updating is effected at plant level if plant conditions are allowed for the plant.
C
Updating is effected without plant data if plant conditions are not necessary for the plant.
Dependencies
The level at which updating of the document number may be effected is defined for each plant.
Hope it clears.

Mass Creation of Material Group Purchase info record

Dear All
Currently we are developing a custom transaction in SAP to mass upload Purchase Info records from a flat file (excel)
We are using the standard Function Module ME_POST_INFORECORD to create the PIR s
We use two different number ranges for Material and Material Group PIR s. This is set up already in SPRO>MM>PIR>Define Number Ranges
Purchasing info record for stock material (Group - IL ) have a number range X
Purchasing info record for material group (non-stock mat.)(Grpup -IN) have number range Y
So when we create a Material PIR manually in SAP it picks X number range and Y number range for Material Group PIR
But when we create Material Groups PIR via the new custom transaction it creates PIR s with Number range X.
Upon checking understood that the standard FM ME_POST_INFORECORD is always defaulting the Number Range Group as IL internally . Seems like a harcoding done by SAP
Wanted to know
- Is there any another FM we should consider while creating Material Group PIR s. Any other Function module provided by SAP for that ?
- Or what can be other way to resolve this ?
Please let me know your views on this.
Regards
Shyam

Hi,
For mass upload from flat files you can consider LSMW with different options e.g. IDoc:
Message Type INFREC
Basic Type INFRECMASS01
or simply via recording of transaction (this should be using exactly the same NR as you have when doing this manually).
Regards,
Tomek

Automatic creation of Purchasing info record while creating PO.

Similar Messages

Maybe you are looking for