Autonomy Backup Client - issue with full backup but incrementals okay
We run Autonomy to back-up our Laptops across the enterprise .
I notice on one laptop here that the account within Autonomy Admin shows taht "Last known good full backup = Not applicable", but when you go into client history you can see that the incremental backups have been happening okay.
Should I be conerned? Is this backup file corrupt? If so, how please can I fix with minimal impact to the user.
Thanks
Ronnie73 wrote:
We run Autonomy to back-up our Laptops across the enterprise .
I notice on one laptop here that the account within Autonomy Admin shows taht "Last known good full backup = Not applicable", but when you go into client history you can see that the incremental backups have been happening okay.
Should I be conerned? Is this backup file corrupt? If so, how please can I fix with minimal impact to the user.
Thanks
For this unless this is a HP software product you need to contact the Software manufacture that you use for your backup for support on their software...
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-
Similar Messages
-
I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?
What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now? -
I have an old PowerPC running 10.4.11 and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same wireless router. The old Mac connects with full bars but the MBP struggles with only 2 bars. Pls help, thanks!
BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 800 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 133 MHz
Boot ROM Version: 4.3.3f2
Serial Number: XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host> -
I have issues with purchasing apps, but I can download free apps. Error telling me to contact apple?
Then contact iTunes support like the message said:
Apple - Support - iTunes - Contact Us -
I bought an unlocked iphone 5s with full paid but what i got is "SIM Not Valid". Don't know this is because of Apple or Sprint problem? It suppose to be unlocked and allow me to use any carrier worldwide. What is going on? What should i do? Return a phone and get refund?
If you purchased a Sprint iPhone, you DID NOT purchase an unlocked iPhone. All Sprint iPhones are carrier locked to Sprint, & Sprint will only authorize the unlocking of the sim slot for current customers using the phone on their network. If you are not a current customer, using that phone on Sprint's network, you wasted your money, as Sprint will not authorize the unlocking of the sim slot.
So, it the above is the case with you, yes, return the phone for a refund, if you still can. -
OS X LION Issues with Full-Screen; iPhoto, Image Capture & Mail
Hello,
I'm experiencing un-Apple-like issues (bugs) with Lion in Full-Screen mode.
For example - iPhoto doesn't seem to like Full-Screen mode. If iPhoto is open and I connect a camera, for which I prefer Image Capture to retrieve my pics... Image Capture opens 'behind' the full-screen iPhoto, but I can't get to it. Image Capture shows as open on the menu bar in iPhoto's full-screen mode. If I go to the desktop (where it should be opening) Image Capture isn't 'on top' and clicking it takes me back to iPhoto full-screen
Similarly, if I get mail and return to the desktop (the only way to see the dock) and I click on the 'Mail' app icon - I am catapulted into Image Capture... or iPhoto. Returning to the Desktop to click the Mail icon from the dock... takes me to Image Capture... or iPhoto. The 3rd try takes me to the Mail.app which is usually always open and in full-screen mode.
While I'm complaining about bugs, I'd like to mention that I am fully dismayed by the loss of control in full-screen mode when using apps such as Mail or iPhoto. The Mail app opens an email to edit (such as a reply) but you can't access any other mail docs to 'cut and paste' info from. I can only click SEND or CANCEL.
What if I don't want to CANCEL? I just want to go to another email and cut a piece to paste.. I have to exit full-screen mode which allows me to open two email documents at once, then cut and paste. Essentially Mail in Full-Screen is only a reader... not a work area. I can only access the document I have open, since it greys out the Message Viewer. You can't click on the message viewer nor access any of the features of Mail.app. You can only write your email and either Cancel or Send. Where is the 'hold on a second while I go cut and paste'? I don't want to cancel.
Can't seem to use Safari since I'm constantly three-finger swiping it away. My cursor hovers over a text field and suddenly it's zooming in and locks text input. I have to iPhone-like swipe to expand to exit this inadvertent partial (very slight) zoom. Sometimes the zoom is so partial that I can't figure out what's going on until I just exit full-screen mode, close the window and start over.
Seems like I'm starting over and over and over... just to do simple things. Inadvertent zooming, inadvertent 3-finger returning to Desktop, inadvertent changing apps... ugh.
I'm willing to let go of the old and embrace the new future but so far it's been pretty uncomfortable for me to constantly monitor my overly sensitive trackpad gesturing combined with constant bugs and glitches. I'll save complaining about iPhoto's over-simplification (apparently for dummies) like the new Edit menu, Export menu, etc.. since it's more iLife than Lion related. Rate Lion: 2 out of 5 stars for ease of use & features complicated by unrefined software issues.I've tried follwoing these instructions but I have an issue with
# Create snort user. The intention is to let user snort have access only to the snort database.
$ sudo createuser -U _postgres -P snort
Password:
Enter password for new role:
Enter it again:
Shall the new role be a superuser? (y/n) n
Shall the new role be allowed to create databases? (y/n) n
Shall the new role be allowed to create more new roles? (y/n) n
It keeps telling me "could not connect to database postgres: could not connect to server: No such file or directory"
I'm running OSX Mountain Lion, and have verified using serveradmin status postgres that it is up and running. -
Cisco Agent Desktop / Supervisor Desktop Issue with Full Disk Encryption
Has anyone had any issues related to running Cisco Agent Desktop or Cisco Supervisor Desktop on a machine running full disk encryption? Our desktop team installed full disk encryption software from Check Point, and it seams to be causing some issues with call monitoring, screen pops via workflow and connectivity to the UCCX server. It's not effecting every machine (that we know of), but the fix for us right now is to provide a desktop without the encryption software. I'm just wondering if this is related to us, or if there is any supporting documentation out there?
Any help is apprecicated.CAD for IPCCX v4 does not support windows 7. See compatibility matrix:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
In my experience if you already have CAD installed and you upgrade the OS (without a fresh rebuild) CAD will work - but it is NOT supported. You should test this though.
You will not be able to install the older version of CAD on windows 7, the installer will give you errors.
Brian
please rate helpful posts -
Issue with Full Screen & Input languages (Mavericks 10.9.1)
I have two issues with the latest (Version 8.0.24308) Microsoft Remote Desktop from the Mac App store:
1. If I tick the connection entry "Start session in fullscreen" option, after connect the desktop slips upwards like on the screenshot (below on the link)
2. The default input method switches to Latvian after connect (never used Latvian anywhere...).
On my Mac:
- System language: Hungarian
- Input language: Hungarian
On the server:
- System language: English
- Input language: Hungarian (default) + English
+: the app doesn't supports Retina display resolution :(
Screen Shot link:
db.tt/yYKN0arMHi,
1. The version 8.0.24308 offers updated functionality for full screen mode to users of OS X 10.7+:
OS X native: The native full screen feature for the Mac OS X version.
Custom: The custom full screen mode enables the multi-monitor feature in order to provide a better experience for users of Mac OS X versions 10.7 and 10.8.
Important information for users of 10.9: if you have disabled "Displays have separate Spaces" in Mavericks
(System Preferences > Mission Control) go to Preferences > Resolution in the Microsoft Remote Desktop client and configure the setting using the same option.
Please try the OS X native mode and see how it works.
2. The OS keyboard locale, is suggested to the remote PC. Therefore, please check the keyboard locale.
Hope this helps.
Jeremy Wu
TechNet Community Support -
Build 711 client issues with XGL?
Are there any known issues with installing the latest build of the 1.2
beta client (711) on the released version of SLED if XGL is enabled?
After installing the client and restarting, I got a message that my
display couldn't initialize (or something like that, it's the standard
error when X doesn't start) and it asked if I want to look at the X server
log. I said no, did the --disable-xgl, and now X came up ok. I then
reenabled XGL using the desktop effects, and 3D is working again even
after a restart.
Just wondering if the install of the client temporarily breaks XGL & X
necessitating disabling and reenabling XGL.
JoeOn Thu, 20 Jul 2006 16:28:17 +0000, linuxjoe wrote:
> Not that I know of. I have it running on my laptop with xgl and the 711
> client and it is running just fine. Typically when I see the error that you
> are running into, it is because I have done an init 3 and init 5 from the
> CNTL ALT F2 tty and still have the display running on CNTL ALT F7.
I hadn't changed my runlevel at all. Simply installed the Novell Client
and rebooted. I could see I was in runlevel 5, but with no GUI since X
couldn't start. Ran the XGL disable thing, typed startx, and now the GUI
came up. Within there use desktop effects to reenable 3D effects (all
still in runlevel 5 and having never switched to any alternate terminal
screen), log off, and now it was working. Might have just been an
isolated incident.
Joe -
Nokia N8 Wi FI Connected With full signal but no i...
Hello
I am having some issues with my wi fi at home. I just bought the phone a few days ago and it worked fine for about a day. I can connect to my router with no issues but it wont connect to the internet. Its saying it has full signal from my router and that its connected but i'm unable to connect to anything internet related. My Xbox works fine with the router and so does my G/fs Htc Desire so its not problem with my modem or router. Ive deleted data and restored a couple times as well as disabled the power saving mode in Wi fi settings. It is hooked up using a WEP key with mixed 802.11n, 802.11g, 802.11b. I've changed the wireless channel 1- 11. Hoping to get some feedback so i dont have to send it away.
Much Appreciated
MattTurn from 802.11n to 802.11b/g. Use a WPA/WPA2 shared key.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
i didnt have issues with itunes before...but pc asked to download new version. i did. when i click itunes i get my original music, but when i click store...i get nothing. i watched tutorial....but still cant open itunes store. im looking for music to buy.
Hello bogley
Check out the article below for troubleshooting access to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
AnyConnect SSL Client issue with Mac OS X
Hello this seems to be a very common issue with AnyConnect working on Mac OS X. A lot of random sites talk about this.
I have a Cisco 2801 running IOS 12.4(22)T (ADV ENT SRV) with AnyConnect 2.3 package installed.
From Windows I can connect without any issues.
From a Mac OS X after providing login credentials the AnyConnect log says its connecting... checking for updates... and then disconnects.
If this does work on Mac OS X what is needed (or needs to be configured) to get this to work properly on Mac OS X?
Thank you!Hello All,
I recently experienced the same problem when my company upgraded to our entire company from the stone age to a VPN system using the Cisco AnyConnect. At first, I had the same problem as described above. Then my IT guy and I got on the phone with Cisco.
Here is the solution that worked for me. First, our IT department had to specifically load a MAC connection file into the VPN firewall to allow access for MacIntosh computers. Then I redownloaded the latest anyconnect files and updated whatever else through the vpn.yourcompany.com site. Finally, from www.citrix.com/download I downloaded (on the RH side under featured downloads) the appropriate Citrix ICA File.
Everything works fine now. I don't know if this will work for you, but it did the trick for us. -
Issue with Full-Text (FTS) master merge on SQL Server 2012 SP2
Hi,
On my current project we have really annoying issue with master merge process that occurs after Full Population of FTS Index.
Let me describe our process: we have continuous build that setup environment and run unit tests after each commit in our source control. For each run we create new DB (on the same SQL Server) then fill it with test data and run unit tests. Sometimes unit
tests failed because FTS Index population cannot finish in time.
We have constantly seeing in [sysprocesses] table lots of sessions with wait type FT_MASTER_MERGE that block our tests
In FTS log we have following error:
The master merge started at the end of the full crawl of table or indexed view [TABLENAME] failed with HRESULT = '0x80000049'. Database ID is '45', table id is
706101556, catalog ID: 5.
Here is an example of how we create FTS catalog and add table to it (As you can see it's created with auto change tracking together with
index update in background):
-- Create FTS catalog
EXEC sp_fulltext_catalog 'WilcoFTSCatalog', 'create'EXEC sp_fulltext_table 'Users', 'create', 'WilcoFTSCatalog', 'PK_Users'
EXEC sp_fulltext_column 'Users', 'UserId', 'add'
EXEC sp_fulltext_column 'Users', 'Name', 'add'
EXEC sp_fulltext_table 'Users', 'activate'
EXEC sp_fulltext_table 'Users', 'start_change_tracking'
EXEC sp_fulltext_table 'Users', 'start_background_updateindex'
Does anybody know what is the root cause of this issue and what should be done to avoid it?
Thank you in advance,
Olena SmoliakHi,
On my current project we have really annoying issue with master merge process that occurs after Full Population of FTS Index.
Let me describe our process: we have continuous build that setup environment and run unit tests after each commit in our source control. For each run we create new DB (on the same SQL Server) then fill it with test data and run unit tests. Sometimes unit
tests failed because FTS Index population cannot finish in time.
We have constantly seeing in [sysprocesses] table lots of sessions with wait type FT_MASTER_MERGE that block our tests
In FTS log we have following error:
The master merge started at the end of the full crawl of table or indexed view [TABLENAME] failed with HRESULT = '0x80000049'. Database ID is '45', table id is
706101556, catalog ID: 5.
Here is an example of how we create FTS catalog and add table to it (As you can see it's created with auto change tracking together with
index update in background):
-- Create FTS catalog
EXEC sp_fulltext_catalog 'WilcoFTSCatalog', 'create'EXEC sp_fulltext_table 'Users', 'create', 'WilcoFTSCatalog', 'PK_Users'
EXEC sp_fulltext_column 'Users', 'UserId', 'add'
EXEC sp_fulltext_column 'Users', 'Name', 'add'
EXEC sp_fulltext_table 'Users', 'activate'
EXEC sp_fulltext_table 'Users', 'start_change_tracking'
EXEC sp_fulltext_table 'Users', 'start_background_updateindex'
Does anybody know what is the root cause of this issue and what should be done to avoid it?
Thank you in advance,
Olena Smoliak -
Lion Ichat client issues with logging into SL Ichat server
We run the iChat server on our OD master running 10.6.8. We have about 250 users and it's working great for everyone on Leopard or SL (the majority of our users).
We just started upgrading people to Lion, as well as getting some new lion machines. The people who are on Lion Pre-Configured machines seem ok, but the people who we upgrade are having issues with logging into it. Sometimes it will work just fine, and other times they just can't log in. They get the ~ symbol by their status and can't connect to the server.
The only fix seems to be trashing their prefs AND rebooting, just trashing them or just rebooting don't seem to be enough to fix this. Anyone seen or have a better fix for this? It has happened more than once for the same user.Same problem here [https://discussions.apple.com/message/23114338#23114338].
Were you ever able to troubleshoot or fix this? File a bug report? -
Lync login issue with one domain but started working when domain is changed.
we have two domains in lync 2013 infra.i have enabled user id with one domain but its not allowing user to login.If we change user id to other domain it start working. it seems user id already existed somewhere in lync or active directory database. can
anyone tell how to remove complete user database so that the id can be assigned to other new users.Hi,
Did the user account also be deleted or disabled in AD? Disable account is different form remove account. If you disable an account the account is still stored in AD, whenever you need to enable it you can find it. So if you only disable the account who
leave the company, please remove the account and try again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Maybe you are looking for
-
Matrix Report converting to Excel
Hi, I have a matrix with group report, when i tried to convert in excel data comes in tabular format, i need the data in excel similar to report format Please help Regards, NHM
-
How to calibration switch relays
To NI AE: I now have a Auto test system which have 2 PXI-2532 Matrixs card.And I want to write a switch calibration program.Use this Program I can know which relay is fault and which relay is ok.I found in NI-MAX,I can use self-test to test swit
-
Dear Forum, I would like to clarify these 2 tax from SAP posting behaviour. 1) VAT or input and output tax - if purchase, we pay more to vendor, then later on we claim back. if sales, we debit more on customer then later we pay to tax authority. corr
-
Time out came up on Camera File Generator Hi Recently I use Camera File Generator Version 2.1.1 to control a CamraLink camera through IMAQ PCI-1428. When I grab the image "Acquisition Timeout" message came up. I changed smaller image format, but it w
-
I am using an iPhone 4 and when I try to search in Safari it just keeps loading and reloading. The status bar appears to be moving, but then it resets. It does this all very quickly. After 45 seconds or so, a message from google appears saying "We're