AVC Availability check add recipient emails

Hi to all,
I have a requirement to send an email to several recipients. We have 2 company code i must send separate emails based on tolerance profile example z100, z200.
Now checking the BADI FMAVC_EVENT using interface IF_EX_FMAVC_EVENT~MODIFY_MAIL_RECIPIENTS to add recipents using sap user-name.
now the problem is the parameter for this interface is not enough to send based on tolerance. because i can only use these fields structure
FMAVC_S_EVENT_BADI_AVC_LINE
Field--Desc--
Value
ALDNR--Control Ledger--
9H
FISCYEAR--Fiscal Year--
2009
FM_AREA--Financial Management Area---8888
RFUNDSCTRFunds Center--
3020401000
RCMMTITEM-Commitment Item--
6000100
I am a ABAPer i have no idea with AVC hoping for your guide in table mapping to connect the relation between the available data above to tolerance profile.
lastly if anyone know how to edit the message in the email.
thanks in advance.
Edited by: Etrafanob on Nov 26, 2009 3:37 PM

Hi Eli,
this FM FMAVC_CALL_DERIVATION_TOLPROF solved my problem, when i run the FM FMAVC_READ_ATTRIBUTES_ALDNR the tolerance profile result is Z100 but when i run FM FMAVC_CALL_DERIVATION_TOLPROF the result is Z200 which is correct based on the 'maintain derivation strategies for avc tolerance profile' configuration. but the FMAVC_READ_ATTRIBUTES_ALDNR also needed because based on the FM FMAVC_CALL_DERIVATION_TOLPROF parameters i need to extract the profile rule which is i will be came from FMAVC_READ_ATTRIBUTES_ALDNR...
I cant figure out how did you trace the FM in transaction FMAVCDERITPROF?. because i only see the field parameter, steps derivation when i test it.
anyway thank a lot more power on SDN ,
best regards,
Etrafanob
Edited by: Etrafanob on Nov 28, 2009 11:49 AM

Similar Messages

Re : Availability check in third party

Hi
While creating sales order for third party scenatio a availability check is automatically carried out. But for noraml sales processes if stock is there it does nor check availability. I want to know how to avoid the availability check in third-party scenario. I checked BANS and NORM. Item category(TAN and TAS) also i checked. I coun't found any changes.
How to solve this.
Thanks Anto

Dear Antony,
Availability Check in Sale order will be controlled in the sale order by the following..
1. You can control the Availabilty check in sale order by means of the Requirement Class
2. You cn fine tune (i.e., either you want to Switch ON it or OFF) the Availability Check in Sale order by using Schedule line Category.
Rquirement Class: TCode : OVZG
Here you do need to check the indicator AvC(Availability Check). If you checked this indicator which will carry out Availability check in Sale order.
Rquirement Type will be assigned to Requirement Class using the transaction OVZH.
You can find out which requirement type has been used in Sale order - in Procurement Tab at Overview screen.
In VOV6(Schedule line Configuration) - there will be an indicator Availability check. This indicator will be used either to Switch ON/OFF Availability Check in Sale Order.
Ex:
Say in Req. Class - you have checked the AvC indicator, but for your schedule line you do not check the Availiability check indicator - then you can not carry out Availability Check in Sale Order.
i.e,Availability Check box should be checked in both places. Then only, you can carry out Availability check in Sale order.
In your case, it must be checked in either of the above mentioned palces.
Because, then only you can carry out Availability Check in Sale order..
Hope it may help you.
Thanks,
Venkatesh.S.P

Email Failing: Failed to add recipient

I have an update form with a send email behavior that is updating the record but the send email behavior is failing. This is the error message:
E-mail couldn't be sent. Error returned: Failed to add recipient: @localhost [SMTP: Invalid response code received from server (code: 501, response: <@localhost>: no local part)]. (EMAIL_FAILED)
Trace:
tNG Execution Trace:
tNG_update.executeTransaction
STARTER.Trigger_Default_Starter
tNG_update.doTransaction
BEFORE.Trigger_Default_saveData
tNG_update.saveData
BEFORE.Trigger_Default_FormValidation
tNG_update.prepareSQL
tNG_update.executeTransaction - execute sql
AFTER.Trigger_SendEmail*
tNG_update.getRecordset
tNG_update.getFakeRsArr
tNG_update.getLocalRecordset
tNG_update.getFakeRecordset
I have another form on this site that send 2 emails using the send email behavior and they work fine.
The priority for this send email behavior is 90. I tried changing it to 40 but it fails the same way.
Any help is appreciated.
OK So after sleeping (or not) on this I came up with this. I had the email field on the update form set to display as Text - not Text Field. When I changed it to Text Field it was able to send the email to the correct address. I'm not sure why this is but it worked.

''Matt [[#answer-684982|said]]''
<blockquote>
using an apple device? (The most common cause off this is the unbridled use of connections to improve performance apple devices have. They also have no way to limit connections, or did not.)
Thunderbird will use 5 connections to get mail, and this can be reduced in Edit > account settings > server settings and click the advanced button.
Apple as I understand it has no such limiting option.
The maximum number of connections is set by your provider, you just have to live within that limit.
</blockquote>
Hi Matt ! Thanks for your reply :)
No, It's not an Apple. XD
The machine is a PC desktop running Ubuntu. and I checked the advanced server setting, and I verified that the maximum number of connections to cache is 1, and thunderbird still won't accept any of my IMAP accounts T^T.
But anyway, Thanks ( ^_^ )

Reg:How to add availability check in sales view

hi all
How to add availability check in sales view
regards
JK

HI Janardan..
Check out the help.sap link for Availability check. It has a lot of info.
http://help.sap.com/saphelp_erp2005/helpdata/en/6b/2785347860ea35e10000009b38f83b/frameset.htm
If it helps Reward with points..
Regards Rk

Check if valid email before add to DB

Hello, i want a class or JSP code for check if an email address submited by users is valid before add to database, sometimes the users send the email uncomplete or with errors and i want to depurate this.
If the email address is valid then add to DB, if not display the invalid email to the users and then they can fix the email error.
Thanks.

These's not too much you can test for. You can check for invalid characters (spaces etc.), the presence of an @ symbol and that the address has a length greater than 3 (a@a is the shortist possible valid address I can think of). The best way to do this is use the java regular expression stuff. Google for a pattern that matches email addresses and test this way.

Budget by periods and availability check (AVC)?

HI ,
Can we have Budget by periods and with availability check (AVC)?
for ex: for
WBS element 1 for January -1000 USD for Feb 5000 USD. And so on...Total yearly budget is 15000USD.
And
WBS element2: January -1500 USD, Feb 2500 USD and so on ...total yearly budget is 25000USD.
If the budget Exceeds for the particular WBS element for the particular period then it should give message (error/warning/).
Can we implement this in Project system?
Thanks for your time

To give budget by period (Month ) is not possible in PS. Budget is annual / overall in PS. you requirement can be achieved by monthly you provide budget to WBS in the form of supplement.
This way indirectly you can achieve the same.
Please refer this post.
Project Budget by Month
Regards
Nitin
Edited by: Nitin Patoliya on Feb 3, 2009 8:40 AM

Option to add POP email acounts not available

On my new BlackBerry Bold 9900 the option to add POP email accounts as described in the handbook is not availble. Only the option enterprise activation is provided. The BB is a none branded device and sold via AMAZON. OS 7.1 Paket 2061 (V7.1.0.714, Plattform 5.1.0.532) Is there a possbility to activate the POP email acount option, because I don't want the use push / enterprise mail.
Thank you very much indeed
Dirk
Solved!
Go to Solution.

Dirk_Thomas wrote:
Hi John,
thank you, sorry for the late answer. Does this mean that for example a Blackberry Classic with OS 10, would pull emails from a pop account on its own, without any specific data plan. Correct?
Thank you
Dirk
On BB10 models the client will poll for email on POP3 server at an interval you select. When the email client finds email it downloads it do the device. Depending, you might want to set a long interval (30 minutes or an hour) and then manually refresh if you should happen to want to check at any time in between. You can set short intervals, if you want, and see what it does to battery life.
On BBOS models (with BIS as described above) the BIS server is doing the polling, and it pushes the email to the handset. The polling interval depends, If the BIS is finding email on the server each time it polls, then it will tend to poll more frequently. If it doesn't find email, it reverts to the default interval which is something like 15 minutes. Some accounts are pushed as soon as email arrives, such as Windlows Live, or Outlook.com.
- Ira

Static availability check leads to negetive stock 15.00,000- KG in 0001 UT

Gurus,
<b>Static availability check leads to negetive stock 15.00,000- KG in 0001 UT</b>. I am getting the above error message . Any suggestions why this error message coming up.
thanks in advance.

Hi,
Here is a blog regarding how to fix WMI issue might be useful to you:
Fixing WMI issues Using Batch Script
http://social.technet.microsoft.com/wiki/contents/articles/6887.fixing-wmi-issues-using-batch-script.aspx
In addition, you mentioned Remote Desktop Servers are in a cluster setup, would you tell us how did you create the cluster?
As far as I know, with RD Connection Broker, we don’t need to create a cluster but just add multiple RD session hosts into one collection, then RD connection Broker would redirect sessions automatically.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Want to know table which stores SPOOL LIST RECIPIENT & email addres

Hi Guys,
I need to create a report for all jobname & recipient email address. Kindly let me how to find out the recipent's email address for all jobname in TBTCP. I understand that recipent is the distribution list, distribution list has email address.
JOBNAME ---> SPOOL LIST RECIPEINT -
> EMAIL ADDRESS.
thanks.

Guys thanks for you help and time.
I am not getting the expected result after doing above steps.
I will try to clarify the requirement further.
When I run t-code SM37 and enter following :
Job name : TXDET-DAILY
User name : *
Job Status : Checked Sched. Only.
On next screen JOB OVERVIEW. Only one record shows up for job TXDET-DAILY. When I double click this record, system takes me to next screen where there is button for SPOOL LIST RECIPIENT. When I click this button it displays the recipient is TXDET. TXDET is actually a Distribution list name, maintained in SAP office (SO01).
When I go in t-code SO01 and click DISTRIBUTION LIST button and then enter shared distribution list name TXDET.
It gives me 2 email addresses under this TXDET distribution list.
[email protected]
[email protected]
The spool from the job TXDET-DAILY will be emailed to these 2 email addresses.
Now I need a report which gives following information.
Job Name................. Distribution List Name...............Email Address
TXDET-DAILY............TXDET......................................[email protected]
TXDET-DAILY............TXDET...................................... [email protected]

How do you add another email account

I have clicked on settings, than clicked on mail, contacts, calendar. But the Accounts section is all grey. I can't add another email account or even delete the existing one. I have changed email accounts, so this is really annoying. Can someone please help me here.
Cheers

Did you check your restriction settings on your ipod for changing accounts in Settings/General/Restrictions?

How do I add more email inboxes to the Mail application?

Hey guys!
Just a quick question! An answer in which I'm sure will be simple. How is it I add more email inboxes to the pre-installed "Mail" application? In other words, I have two email addresses in which both are used by myself. One is Yahoo, and the other Google Mail. How is it I can view both of the inboxes for these email addresses at the same time on the mail app?
Regards & thanks for any answers!

One option available is to open a new viewer window and then select the mailbox.
Mail > File > New Viewer Window

Material Availability Check for material launched in the future

This is the requirement;
We are launching a product in the future. Lets use August 19th as our launch date This means that on August 19th our material can be goods issued. It cannot be shipped before then. There is no loading time etc. so our GI date usually = our material availability date
Our production & procurement activities are executed allowing us to build our stocks so we have on hand stock of the material. We are receiving customer orders. Availability check is run and it is being confirmed for dates before the GI date (As we have stock in the system). For example, a sales order is created with a requested delivery date = 19th August; Would be acceptable if there was no transit time. But what if there is a route determined with a transit time for 2 days. This brings us to a material availability date of 17th August (And therefore a GI date of 17th August) which is before our product launch date. This needs to be avoided; the earliest material availability date must be 19th August as this will then be the earliest GI date.
Therefore, the requirement is that availability is not confirmed for a date before our launch date. But is confirmed for the launch date.
For example, how do Apple launch their products (like iPads)in future dates but entertain customer orders well before the date & then confirm the future dates to end customers? At the time when they receive the orders from end customers, I am sure that they would be holding stock of sufficient iPads for future deliveries.

There may be more than one way you can fulfill the requirement. First is use of user exit. In enhancement ATP00001 (User exits in the availabity check), you can try using EXIT_SAPLATPC_002 (processing results of actual check). Here you can add logic that if the system date is less than Aug 19th 2011, then propse confirm date (material available date) as 19th of August 2011.
The second option would be use of Replishment time (RLT) in the material master MRP3 view. You can maintain certains days to match August 19th (of course you need to reduct one day when the days go-by). At the same time in t.code OVZ9, you need to uncheck the box check without RLT for the combination of availability check rule and availabity check group. After August 19th, you can check the box again after removing the RLT time in material master. My preference is to go with first option.
Regards,

Availability check run requirement in the Sales order Save user Exit.

Hi Gurus,
As per the requirment we are using a user exit SAVE SALE ORDER PREPARE for BOM purpose to reconfirm the confirmation qty.
Now we need to add one more logic in the same user exit, which will run the availabilty check run for each of the line items of the BOM and consider latest confirmation qty from it. So my concern is it possible that we can call the availabilty check run event with in the user exit SAVE SALE ORDER PREPARE or this not advisable?
Please let me know..
Regards,
Babs

HI Venkat,
Thanks for your reply.Yes you are right availability check runs automatically at sub item level.
But please note the customer requirment iteself is is little different from std BOM configuration.
Currently the availabilty check is activated both at header and sub item level. They are maintaining the stock for header and sub item level.Also the these sub items are some time being sold as invidual materials. hence there exist a mismatch in the stock value between header and sub items.
when a sales order is created both header and sub items will have confirmation with different value between each and the same mismatched values are being passed in to delivery. But the deliveries can not be processed for PGI because of the mismatched confirmation qty between header and item level.
I guess now you the rrequirment.
So we are using the SAVE SALE ORDER exit which will re check the confirmed qty between header and item and takes lowest confirmed qty and change the confirmed quantities from all the line items to lowest one, so that confirmation qty among all the line items are same. This is the first logic we are planning.
Further there is one more additional process BOP need to be run for this header and sub items, which will change the confirmed qty based on the latest stock for individual line item. even in this case also the user exit SAVE Sale order is being called but we need to run the availability check run additionally because of which our requirment will be taken care.
Regards,
Babs

Why can't I add additional email addresses to my Apple ID?

In my family we share the same Apple ID.
However, we would like to be able to use iMessage and Facetime amongst the different units (iPhones/iPads), which requires me to have several email addresses registered under the Apple ID, as all units (ie. the iPads) do not have associated phone numbers.
However, when I add them directly under Settings -> Facetime/iMessage -> Add Another Email it gives me an error (unspecified - it just says an error occured), when it tries to verify my email.
I then figured that I needed to have all these different email addresses registered to my Apple ID we all are using. Hence I went to appleid.apple.com and signed in to manage my Apple ID. I tried adding additional email addresses under "Add Email Address". But when I push "Save Changes" after having added another email address nothing happens. It just sits there.
I have tried several different browsers on different Macs and even on the iPad, but all with the same result.
Can anybody help?

Hey Thomas,
I was able to get my MobileMe email address verified tonight... I logged into the Manage Apple ID website with my MobileMe email address and it again said it's own email address wasn't Verified. So I tried, for the **** of it, to add an additional Alternate Email Address and added the MobileMe email address for which I was logged in as. It immediately took the email and marked it verified with the green check mark. The only thing, my MobileMe.com email address shows up as the Primary and then again listed under the Alternates. I tried deleting the one listed under the alternate but it doesn't go away. I'm just trilled it's now verified and I can log in and use my MobileMe email address in the iMessage, FaceTime and Find My Friends services!
I still cannot, however, delete my MobileMe email address that's still listed as an un-Verified alternate on my old iTunes Apple ID, but it's not affecting the fact that my MobileMe email address is NOW verified on my MobileMe Apple ID!
So all is finally working now, after a week, and after being on Apple's Express Lane Chat and to the store's Genius Bar on Thursday 10/20 which were both a joke.
Brian

Ability to add multiple email addresses to the same contact person

Hello SRM Experts,
I have a question in SRM 5.0
In "Personal Data" tab of "Employee Data" in Manage Business Partner, we have the ability to add multiple email address. But only one email can be selected as standard.
We have a new requiremnt that more than one email address has to be selected. Which means, when a bid invitation is published, the email notification has to go to all the email addresses from that list.
How can this be achieved?
Any information would be appreciated.
Thank you

By default the system send intimation to only one email id to the contact person.
If you want to be send to the multiple email id for a contact person. you need to implement the same in the BADI..
Try to find the BADI which is called on save of Bid invitation. You can check of the 'Published' status in the BADI method and fire the emails as required.
Regards,
Ramesh

AVC Availability check add recipient emails

Similar Messages

Maybe you are looking for