Azure Pack Windows Service Bus 1.1 wont start on Windows 8.1
Hi I am installing Azure Pack Windows Service Bus 1.1 on my Windows 8.1 (I have tried with 4 more computers) and everyone keep getting the same error.
After the configuration when the Service Bus Gateway tries to start up it gets stuck in starting mode and after a while it is turned off then try to start again.
After some fail searching I can see that it is the <component name="MessagingRuntimeProvider" type="Microsoft.Cloud.ServiceBus.Messaging.Runtime.MessagingRuntimeProviderFactory, Microsoft.Cloud.ServiceBus.Messaging" /> component
that make it get stuck.
I have no idea why though, any ideas?
This is the error I get in the event log:
Faulting application name: Microsoft.ServiceBus.Gateway.exe, version: 2.0.30904.0, time stamp: 0x5227aa54
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0x80131623
Fault offset: 0x00007ffb3a8258c8
Faulting process id: 0xe20
Faulting application start time: 0x01d07cf56f493327
Faulting application path: C:\Program Files\Service Bus\1.1\Microsoft.ServiceBus.Gateway.exe
Faulting module path: unknown
Report Id: e317b8e7-e8e8-11e4-8261-600308a8ce71
Faulting package full name:
Faulting package-relative application ID:
Not many responses...
Similar Messages
-
Let me preface this by saying that I have been able to connect to the destination Service Bus Topics and Queue using traditional .NET methods (e.g. System.ServiceBus.Messaging namespace) and the applications using those components are running fine on the
same local VM. This uses the connection string that is provided from GET-SBAuthorizationRule.
Development Environment:
Windows Server 2012
SQL Server 2014
BizTalk 2013 R2
Local VM that is not on the Domain (but can connect to computers on the network)
I am trying to create a simple BizTalk 2013 R2 Messaging Solution that will use the SB-Messaging adapter features with Windows Service Bus On-Premise. My solution is using a Static One-Way Send Port to send messages to an existing topic on with Windows
Service Bus 1.1 using the SB-Messaging Adapter. After using the programmatic approach, the configurations were not as intuitive, but I believe I am close to the resolution. I have tried several combinations of key data but I am still not able to
connect. This seems like I am missing something small that is causing the problem but I am at a loss for the moment. The error I receive is below:
A message sent to adapter "SB-Messaging" on send port "SBSendPort" with URI "sb://<SERVERNAME>/NsServiceBus/collateraltopic" is suspended.
Error details: System.UnauthorizedAccessException: The token provider was unable to provide a security token while accessing 'https://<SERVERNAME>:7355/WRAPv0.9/'. Token provider returned message: '<Error><Code>400</Code><Detail>Namespace cannot be resolved 'https://<SERVERNAME>:7355/WRAPv0.9/'.TrackingId:6bcd22e8-1741-41fc-a84c-9aa3f7146ab5_GUS2522512,TimeStamp:6/30/2014 8:35:35 PM</Detail></Error>'. ---> System.IdentityModel.Tokens.SecurityTokenException: The token provider was unable to provide a security token while accessing 'https://<SERVERNAME>:7355/WRAPv0.9/'. Token provider returned message: '<Error><Code>400</Code><Detail>Namespace cannot be resolved 'https://<SERVERNAME>:7355/WRAPv0.9/'.TrackingId:6bcd22e8-1741-41fc-a84c-9aa3f7146ab5_GUS2522512,TimeStamp:6/30/2014 8:35:35 PM</Detail></Error>'. ---> System.Net.WebException: The remote server returned an error: (400) Bad Request.
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at Microsoft.ServiceBus.TokenProviderHelper.TokenRequestAsyncResult.<GetAsyncSteps>b__8(TokenRequestAsyncResult thisPtr, IAsyncResult r)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
--- End of inner exception stack trace ---
Server stack trace:
Exception rethrown at [0]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(TokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(TokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.GetAuthorizationToken(String appliesTo, String action)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.GetAuthorizationHeader(String action)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.CreateWcfMessageInternal(String action, Object body, Boolean includeToken, String parentLinkId, RetryPolicy policy, TrackingContext trackingContext)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.GetOverheadSize()
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender..ctor(String path, SbmpMessagingFactory messagingFactory, SbmpMessageCreator messageCreator, RetryPolicy retryPolicy)
at Microsoft.ServiceBus.Messaging.Sbmp.CreateSenderLinkSettings..ctor(SbmpMessagingFactory messagingFactory, String entityName, Nullable`1 entityType, String transferDestinationEntityName, RetryPolicy retryolicy)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessagingFactory.OnBeginCreateMessageSender(String transferDestinationEntityName, String viaEntityName, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.Messaging.MessagingFactory.CreateMessageSenderAsyncResult.<GetAsyncSteps>b__52(CreateMessageSenderAsyncResult thisPtr, TimeSpan t, AsyncCallback c, Object s)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.Start()
Exception rethrown at [0]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.Common.AsyncResult`1.End(IAsyncResult asyncResult)
at Microsoft.ServiceBus.Messaging.OpenOnceManager.<>c__DisplayClass4`1.<Begin>b__3(IAsyncResult r, T& output)
at Microsoft.ServiceBus.Messaging.OpenOnceManager.OpenOnceManagerAsyncResult`1.OperationComplete(IAsyncResult result)
at Microsoft.ServiceBus.Common.AsyncResult.SyncContinue(IAsyncResult result)
at Microsoft.ServiceBus.Messaging.OpenOnceManager.OpenOnceManagerAsyncResult`1.BeginOperation()
at Microsoft.ServiceBus.Messaging.OpenOnceManager.OpenOnceManagerAsyncResult`1.OpenComplete(IAsyncResult result)
at Microsoft.ServiceBus.Common.AsyncResult.SyncContinue(IAsyncResult result)
at Microsoft.ServiceBus.Messaging.OpenOnceManager.OpenOnceManagerAsyncResult`1..ctor(OpenOnceManager openOnceManager, TimeSpan openTimeout, AsyncCallback callback, Object state, Func`3 beginOperation, EndOperation`1 endOperation)
at Microsoft.ServiceBus.Messaging.OpenOnceManager.Begin[T](AsyncCallback callback, Object state, Func`3 beginOperation, Func`2 endOperation)
at Microsoft.ServiceBus.Messaging.MessagingFactory.BeginCreateMessageSender(String transferDestinationEntityPath, String viaEntityPath, Boolean tryPairSender, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.Messaging.Channels.ServiceBusOutputChannel.OpenMessagingFactoryAndMessageSenderAsyncResult.CreateFactoryComplete(IAsyncResult result)
at Microsoft.ServiceBus.Common.AsyncResult.SyncContinue(IAsyncResult result)
at Microsoft.ServiceBus.Messaging.Channels.ServiceBusOutputChannel.OpenMessagingFactoryAndMessageSenderAsyncResult..ctor(ServiceBusOutputChannel outputChannel, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.Messaging.Channels.ServiceBusOutputChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open()
at Microsoft.BizTalk.Adapter.SBMessaging.SBMessagingOutputChannelFactory.OnCreateChannel(EndpointAddress address, Uri via)
at System.ServiceModel.Channels.ChannelFactoryBase`1.InternalCreateChannel(EndpointAddress address, Uri via)
at System.ServiceModel.Channels.ChannelFactoryBase`1.CreateChannel(EndpointAddress address, Uri via)
at System.ServiceModel.Channels.ServiceChannelFactory.ServiceChannelFactoryOverOutput.CreateInnerChannelBinder(EndpointAddress to, Uri via)
at System.ServiceModel.Channels.ServiceChannelFactory.CreateServiceChannel(EndpointAddress address, Uri via)
at System.ServiceModel.Channels.ServiceChannelFactory.CreateChannel(Type channelType, EndpointAddress address, Uri via)
at System.ServiceModel.ChannelFactory`1.CreateChannel(EndpointAddress address, Uri via)
at System.ServiceModel.ChannelFactory`1.CreateChannel()
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.GetChannel[TChannel](IBaseMessage bizTalkMessage, ChannelFactory`1& cachedFactory)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendMessage(IBaseMessage bizTalkMessage)
MessageId: {28428716-88C2-437B-953F-D471DA00C5A6}
InstanceID: {18C48B89-D9C0-47A8-ADF0-0CA62746FBB1}
Below are my Send Port Adapter Configurations:
URI is blacked out
/Namespace/Topic/ are next in the path
Can someone confirm that the Issuer Name is the Namespace and the Issuer Key is the Primary Key from the get-SBAuthorizationRule? I also tried Shared Access Signature (SAS) but that service was connecting to a default port and do not believe that is
how I need to connect.
Also, there is nothing on the Properties Tab as I do not have anything custom for the initial step.
Any and all help is appreciated.Glenn,
Thank you very much for the response, I will go down this route in further detail. A couple of quick questions for you to help further my understanding.
Where is the SAS limitation documented? I am sure I glossed over it and it did not register, but your help in where to look next time will be helpful.
Also, can I change the default Port for which it is listening on the BizTalk Server or the Service Bus Location? The connection string I get from get-SBAuthorization Rule is as follows:
Endpoint=sb://{ServiceBusLocation}/NsServiceBus;StsEndpoint=https://{ServiceBusLocation}:7355/NsServiceBus;RuntimePort=7354;ManagementPort=7355;SharedAccessKeyName=RootManageSharedAccessKey;SharedAccessKey={KeyValue}
The exception I get is:
A message sent to adapter "SB-Messaging" on send port "SBSendPort" with URI "sb://<ServiceBusLocation>/NsServiceBus/collateraltopic" is suspended.
Error details: System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://<ServiceBusLocation>:9354/. The connection attempt lasted for a time span of 00:00:04.0250873. TCP error code 10061: No connection could be made because the target machine actively refused it <IPAddress>:9354. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.ServiceModel.Channels.SocketConnectionInitiator.ConnectAsyncResult.OnConnect(IAsyncResult result)
--- End of inner exception stack trace ---
It looks like it is going to 9354 for the authentication when the Service Bus is configured for
7355. I believe I have opened the ports on both ends but do not think it will matter since it looks like it is sending the
request to a different location.
Thank you -
Connect Azure Pack to Service Bus for Windows Server with Custom DNS
Hello! I'm trying to configure Azure Pack to use Service Bus for Windows Server 1.1 with Custom DNS.
All runs on one virtual machine (Windows Server 2012 R2) in Windows Azure.
I following this post:
roysvork.wordpress.com/2014/06/14/developing-against-service-bus-for-windows-1-1
Replace FramDNS "servicebus" to "mymachine.cloudapp.net", and create certificate:
SelfSSL /N:CN=mymachine.cloudapp.net /V:1000 /T
On Windows Azure Virtual Machine:
1.I'll set publuc DNS: mymachine.cloudapp.net
2.Open ports: 10354,10355,10356,10359,10000-10004
3.In hosts file: 127.0.0.1 mymachine.cloudapp.net
4.Create certificate:
SelfSSL /N:CN=mymachine.cloudapp.net /V:1000 /T
PowerShell:
Stop-SBFarm –Verbose
Set-SBFarm -FarmDns 'mymachine.cloudapp.net'
Update-SBHost –Verbose
Start-SBFarm –Verbose
New-SBAuthorizationRule -NamespaceName ServiceBusDefaultNamespace -Name MainRule -Rights Manage, Send, Listen
Afther that i can connect to my ServiceBusDefaultNamespace with SAS.
It's work perfect. But, When I try to create Service Bus Namespace from Azure Pack Tenant portal - in Log an Exception:
Namespace Provisioning Exception. TrackingId: . SystemId: . Namespace: SomeNamespace.
Method: Activating. Exception: System.Net.Http.HttpRequestException: An error occurred while
sending the request. ---> System.Net.WebException: The underlying connection was closed:
Could not establish trust relationship for the SSL/TLS secure channel. --->
System.Security.Authentication.AuthenticationException: The remote certificate is invalid according
to the validation procedure.
And status of namespace - Activating.
Please help!Hi Alexander,
According to the log, it seems that the validation process of the certificate failed.
Please make sure that the certificate is installed in the client properly.
Usually, self-signed certificate should be installed in the Computer Account-->Trusted Root Certificate Authorities.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hi,
I want to know the exacts differences between Windows Azure(Cloud) Service Bus and On-Premises Service Bus (Windows Service Bus 1.0)
Thanks
mitMight ask them over here.
http://social.technet.microsoft.com/Forums/en-us/home?category=biztalkserver
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/home?forum=windowsazuremanagement%2Cservbus%2Cazuremobile&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Is Windows Service Bus a type of ESB ?
Hi,
BizTalk Server & Neudesic Neuron ESB 2.6 are the examples of .net based ESB.
Is Windows Service Bus also an ESB solution from microsoft ?
Thanks
mitMight ask them over here.
http://social.technet.microsoft.com/Forums/en-us/home?category=biztalkserver
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/home?forum=windowsazuremanagement%2Cservbus%2Cazuremobile&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Skype 7.5 wont start on Window 7 SP1 (works in saf...
Skype 7.5 wont start on Window 7 SP1 (works in safe mode with networking) have installed and ininstalled many time too no avail please help - thanks
Problem signature:
Problem Event Name: APPCRASH
Application Name: Skype.exe
Application Version: 7.5.0.101
Application Timestamp: 555498c4
Fault Module Name: StackHash_3e3c
Fault Module Version: 6.1.7601.18839
Fault Module Timestamp: 553e8808
Exception Offset: 000cea5f
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 3e3c
Additional Information 2: 3e3c8728f5a6ac3dc3cf872504b29624
Additional Information 3: 65bd
Additional Information 4: 65bd0535cbe275b746dad4418cc78988
C:\Users\User\AppData\Local\Temp\WER2B05.tmp.WERInternalMetadata.xml
C:\Users\User\AppData\Local\Temp\WER41E0.tmp.appcompat.txt
C:\Users\User\AppData\Local\Temp\WER425E.tmp.mdmpPlease, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here. -
My cq56 wont start it keeps saying windows is loading files but wont start
my compaq presario CQ56 wont sart. it just keeps telling me "windows is loading files" but just wont start
Is the message that the printer is offline?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
If not then check the USB cable between the computer and printer and reseat it if necessary.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Windows defender is stuck and wont start- H50-50
windows defender w.app is stuck and wont start, definitions are out of date but
update failed several times, I've tried to reactivate Windows Defender. to no avail:
" Windows Defender is Microsoft’s homegrown antivirus solution, which is enabled by default in Windows 8. (Unless your PC vendor disabled it to activate a bundled AV solution by Norton, McAfee and their ilk, that is—as Lenovo often does." I looked on MS downloads and there isnt any defender
there isnt any also on my pc programs
I have java 32bits version 8 update 45- lenovo H50-50
thanksTry Windows Defender support for help with that issue: <br />
http://www.microsoft.com/windows/products/winfamily/defender/support.mspx -
W540 fingerprint reader wont start during windows logon
Greetings to all fellow thinkpad owners,
As the title indicates, i have an issue with my w540's fingerprint function.
My laptop is relatively new ~2 weeks old and as i am on vacation i boot it every 2-3 days just to mess with it.
few days ago i noticed that the fingerprint wont always start in the first boot and wont work in windows log on, however it will work if i lock/sleep the laptop.
some times it would work some other times it wouldnt. now i tried re-installing the driver and now FP doesnt appear at all in the logon.
i also noticed that the fingerprint software made the laptop a bit slower during the windows startup. now that i have removed it the password area appears almost immediately during the logon process.
things i have tried so far:
1) all drivers are up to date
2) removed all registered fingerprints, deleted the driver and the FP manager pro
3) installed the FPmanager pro from the lenovo update system and registered new fingerprints
4) i only have 1 admin account on windows and the all options are ticked in the FPmanager pro also in biometric settings its ticked to allow users to use FP to log on.
5) waited for 2-3 minutes in the password area, only the FP led open, but it wouldnt work
the issues persists. FP wont appear on logon but only after sleep/lock.
my software specifications:
win7 x64 pro
antivir
latests windows updates
lenovo software not installed: password manager, quick control
and nothing crazy installed apart from steam for games and windows office.
is this a hardware problem or something that windows 7 are causing?
thank you for your time and thank you in advance for any reply
kind regards,I attempted to reset the policy settings of CSS but then the pop up screen just got stuck:
- I did a reboot and reset the fingerprint data and password (after exporting the
settings),
- uninstalled the fingerprint reader and CSS
- uninstalled the CSS. I had encountered some issues while uninstalling it
Windows is reporting that the installation log file could not be found. I manually
downloaded the driver from the site and used the installer to remove it from my PC
- Reinstalled both CSS and Fingerprint driver
- Import all my security settings (password and fingerprint)
- Tested CSS and used fingerprint as default login method in battery mode
- Enabled Single SignIn method in CSS and BIOS
So far so good, the reinstallation fixed the issue. I did recall that there was a windows update before this mayhem on the fingerprint reader started. -
Windows Services don't show as started in Server Manager
Server manager does not show Windows services as being started on one of our xserves - although Samba is up and operational just fine.
Even after re-starting the server after we moved a month or so ago it has not shown windows as being started. Samba came up ok after reboot with no intervention.
Here's the processes and PIDs:
xserve1:/var/run root# more smbd.pid
853
xserve1:/var/run root# ps ax | grep 853
8432 p2 R+ 0:00.00 grep 853
xserve1:/var/run root# more nmbd.pid
24215
xserve1:/var/run root# ps ax | grep 24215
24215 ?? Ss 0:16.63 /usr/sbin/nmbd -D
8441 p2 R+ 0:00.00 grep 24215
Not sure how to recalibrate Server Manager to recognise that the service is actually running.
Any clues?
Thanks,
Campbell
XServes Mac OS X (10.4.5) 12 Macs & several hundred too many PCsThat happened to me after the update to 10.4.4 and the issue was that somehow com.apple.smbd got set back to start in launchctl.
To see if this is your issue, run this command
Code:
ps alx | grep mbd
You will probably notice that there are not just one each of SMBD and NMBD but one of them has 2 processes. In my case it was like this
0 10269 1 0 31 0 30664 328 - S ?? 0:00.00 /usr/sbin/smbd -D
0 10275 1 0 31 0 28464 684 - Ss ?? 0:00.01 /usr/sbin/nmbd -D
0 10277 10275 0 31 0 28452 184 - S ?? 0:00.00 /usr/sbin/nmbd -D
501 10284 1959 0 31 0 27820 4 - R+ p1 0:00.00 grep mbd
Your post about smbd.pid being the 'wrong' one is the hint that this is going on.
So next run this
Code:
sudo launchctl list
and if you see in that list this
org.samba.smbd
you have the same issue. So to stop this I ran a GUI program called Lingon to unload and disable the offending plist (called smbd.plist in /System/Library/LaunchDaemons) but I think you can run the following to do the same thing
Code:
sudo launchctl unload -w org.samba.smbd
Peter
PowerMac G5 Dual 2.5Ghz Mac OS X (10.4.5) Server -
OSX wont start but Windows will
I have installed Windows 7 on my Maverick iMac using Boot Camp and now cannot get the OSX to start although Windows starts okay.
I have tried to reformat the whole drive using Disk Utility but that doesnt work as it cannot unmount the Boot Camp drive and the OSX drive wont mount.
Please help as this is most frustrating.Yep, saw the world rotating, selected disk utility that showed Boot Camp mounted and Macintosh HD greyed out (Not mounted).
The status of the drive is Read/Write, SMART Verified and GUID Partition Table
It also states this partition cant be modified as the disk appears to be partitioned for boot camp
Highlighted the Macintosh partition, selected erase and after a long time it did nothing, same result if i highlighted the Boot Camp partition.
I am at a loss? -
Windows backup wont start on windows 7 home premium
I have been trying to start my windows backup utility on windows 7. It starts to the loading screen that says Starting windows backup, wait while windows backup starts. It stays on this screen indefinitely as i have left the machine run for days on end
waiting for it to start or error out. Any clues as to what this may be caused by, or how to fix it?follow this document for Windows 7 backup
http://windows.microsoft.com/en-us/windows/back-up-programs-system-settings-files#1TC=windows-7
how much space at target volume? external HDD? USB pen drive?
i suggest using external HDD, USB pen drive will takes forever
or you can also try using 3rd party application, but its our own risk and fully support comes from manufactured -
Windows service bus and appication co-location
What if any guidance is giving on co-locating WinSB on a server with other applications?
Any restrictions on communicating over the bus to an application on the same server as the bus itself?Might ask them over here.
http://social.technet.microsoft.com/Forums/en-us/home?category=biztalkserver
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/home?forum=windowsazuremanagement%2Cservbus%2Cazuremobile&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Itunes wont start on windows xp
i reinstalled itunes but it wont open now i even tried this source http://support.apple.com/kb/TS1776 and deleted SC info.sidb and restart my computer but it still not opening up.
i have reinstalled itunes more than 2 times and also deleted apple service but nothing seem to work please help...Have you tried uninstalling both QuickTime and iTunes through Add or Remove programs on your computer?
For instructions, see this:
Removing iTunes and QuickTime for Windows
By the way, an uninstall does not affect your iTunes library files, since they would still be saved in a folder called "iTunes Music" on your computer.
-Kylene -
It posts, but wont start up windows
hey everyone,
help! my computer wont go past the windows loading screen. I recently brought it to a friend's house for a lan, but when I got there it wouldnt go past the windows loading screen. I tried reconnecting and everything, I even RMA'd the board because I had a similiar but not the same problem before. Well I have the new board in and everything (it's 1.6 bios btw). All the diagnostic LEDs seem fine. But the computer still will not go past the loading screen. Any ideas? Maybe it's a PSU or RAM timing problem? This is really frustrating....Try a stick of DDR2100 or something similar, sounds like the timings are stuck, another mem stick will reset them. Else remove everything, Ram, Drives, power, Cmos Jumper to pins 2 & 3, Video Card, and any USB or PCI cards, leave for several hours to allow total discharge. Then re assemble, if you have a PCI video card use that to get it restarted. But a fresh stick of Ram will likely work.
cheers
jocko
Maybe you are looking for
-
How to get the choice clicked by the user on a Confirmation dialog?
Hi, 'm trying with Confirmation dialog which should return 'yes', 'No', or 'Cancel' I wrote like: String Message="Do u want to update ??"; IWDControllerInfo controllerInfo = wdControllerAPI.getViewInfo().getViewController(); IWDConfirmatio
-
Help with data imports and identifying correct contact
Hi Guys, I am looking to import some data from a csv into a table called 'interactions' This table is linked to contact via a 1-to-many relationship. when I am importing data often I get errors saying that it cant determine which contact to use becau
-
Bookmark titles being truncated at 40 characters
I have created heading styles (H1-H5) in my Word Document. When I convert the file to a PDF and create Bookmarks, the long heading titles are truncated at 40 characters when I create the Bookmark structure. Any advice for fixing the truncation issu
-
IPhoto:add caption on photo
Can I add captions to the photos.I have given names to the photos by clicking on Info button and entering details at top.Is it possible to see the photo name while viewing in full screen without the rest of the photo info on right?
-
Colors & Photo quality unacceptably degenerates once published at .mac
Deciding if I'll move my website (published using the Earthlink Trellix site builder) over to .Mac using iWeb then cancel my Earthlink account and renew my about to expire .mac account. I built one webpage using iWeb and published it to .mac - I used