Bad quality in dissolves for DVD project

Hi, I've been having a lot of trouble with this particular project. It's a DVD project that I can't seem to get right as the dissolves are coming out terribly. The dissolves come out very slow, grainy and a little pixelated/distorted.
METHOD USED: I used to export straight from FCP (version 5.0.4) to Compressor (version 2.0.1), but I've been exporting using File/Export/Quicktime/Make Movie Self Contained/use Current Settings, then putting this file into compressor.
Firstly, are these the correct settings above to use to then import into Compressor?
Secondly, the settings I'm using in Compressor are - 16:9 PAL 90 min best VBR, two pass/bit rate was 6.2 - 7.5 and I didn't change any other settings in there. I choose dolby audio AC3. The project is 60 mins in length and I want to look as good as possible for the client.
(out of interest - when I'm doing a quick burn for a client review using File/Export/QT/movie NOT self contained/ then burn it using toast - it comes out fine - the dissolves are as they should be)
After Compressor I'm using DVDSP to build the project with chapters etc. I then use the Build then Burn to complete the master onto DVD. Are these steps the best to use?
The bad dissolves happen on both stills and video. On one particular section i knew had a bad dissolve from a previous burn, I put compression makers and it still looked really terrible.
I hope you can me help me with the right process needed on this. It's really stressful having problems with this on a regular basis.
Cheers
margie

First, People did report problems with vbr encodes in compressor in earlier versions of compressor. not sure at what point this was fixed, but try doing a cbr encode and see if it's better. Do a short section to test rather than encode your whole project.
Second, you should be judging this on a dvd player and video monitor rather than on your computer screen unless of course your end user will be viewing on a computer.

Similar Messages

Does anyone experienced bad quality when burning a DVD?

Does anyone experienced bad quality when burning a DVD?
Using OS 10.6.8 and Magiv Video in iDVD, I am having a hard time creating a decent DVD. The videos per se are fine, but the intro menu and menu text and images are extremely poor quality and hard to read. What is going on?

Hi my notes on this - might be of help
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser and as Large (NOT HD or other resolutiona as result will suffer) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Bad dissolves in DVD project

Hi, I've been having a lot of trouble with this particular project. It's a DVD project that I can't seem to get right as the dissolves are coming out terribly. The dissolves come out very slow, grainy and a little pixelated/distorted.
METHOD USED: I used to export straight from FCP (version 5.0.4) to Compressor (version 2.0.1), but I've been exporting using File/Export/Quicktime/Make Movie Self Contained/use Current Settings, then putting this file into compressor.
Firstly, are these the correct settings above to use to then import into Compressor?
Secondly, the settings I'm using in Compressor are - 16:9 PAL 90 min best VBR, two pass/bit rate was 6.2 - 7.5 and I didn't change any other settings in there. I choose dolby audio AC3. The project is 60 mins in length and I want to look as good as possible for the client.
(out of interest - when I'm doing a quick burn for a client review using File/Export/QT/movie NOT self contained/ then burn it using toast - it comes out fine - the dissolves are as they should be)
After Compressor I'm using DVDSP to build the project with chapters etc. I then use the Build then Burn to complete the master onto DVD. Are these steps the best to use?
The bad dissolves happen on both stills and video. On one particular section i knew had a bad dissolve from a previous burn, I put compression makers and it still looked really terrible.
I hope you can me help me with the right process needed on this. It's really stressful having problems with this on a regular basis.
Cheers

Hi:
Did you try exporting directly from FCP timeline through Compressor? You can make a short test with some problematic parts of your ffotage to check if you get a better quality. FCP put compression markers in your sequence edits.
Second you can try changing the MPEG2 preset from VBR to CBR:
You'll get a bigger MPEG2 file but I guess it will fit in your disc.
Do some tests with these advices and come back. You don't need to encode your full movie for the test, use IN/OUT points to select just some seconds/minutes in the parts you do know you got problems.
Hope that helps !
Alberto

Best settings for DVD project

I have done all of my work so far for online projects so I didn't realise that dvd always has dimensions of 720x576, and that it is only blueray which plays in full HD, until I started building a DVD project in Encore.
I would like some advice to produce the best possible results on a dvd format;
I presume that this means I must build all my menus in photoshop to 720x576 dimensions?
But what about the video itself? It was filmed in 1920x1080, and was created on a 1920x1080 timeline in Premiere Pro, can I simply export it at as an SD file?
What I'm asking really is how should I export my project from Premiere, and build it in Encore for best possible results for DVD format?
Thanks in advance

If you want the best conversion this method is regarded as one of the best,
Bellune Digital Video Services - Tutorials - hd2sd - High Quality Scaling From HD to SD
I'm sure there are topics about this in this forum but I couldn't search and find them.
If your HD material has a lot of fine detail that might strobe try adding a Gaussian blur to your HD export, I find a setting of 3 to 4 vertical helps.

Exort Slideshow for DVD project

Hi, I have made several slideshows in Aperture 3.1.1 which I now want to burn on a DVD.
I'm having problems figuring out which export option to use.
HD wouldn't work as DVDs are SD by definition, so would probably loose a lot of quality in compression through DVD Studio Pro.
Ideally, I would like a lossless option, so I can convert it in MPEG-2 my self and then burn it.
But Aperture only uses H.264(which is not great) AND MPEG-4, which I'm not very familiar with
Any suggestions on what is the best option for DVD?

Hi lindy4
Does it play well on Apple's DVD Player App on your mac computer?
That's the recommended approach on this forum.....namely to make a disc image first from the File menu within iDVD which is created on the Hard Drive. From there you may wish to use apple's Disc Utilities (or Roxio Toast) and burn the image to Verbatim /Maxell DVD-R media at 4 x or slower (slower is better).
Side note: Use Apple's DVD Player app (and not iDVD's Preview function) to actually test playback prior to burning to DVD-R.
Hope this Helps
http://www.apple.com/ilife/tutorials/idvd/id2-4.html
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html
http://docs.info.apple.com/article.html?artnum=93006
http://lqgraphics.com/phototomovie.php

NEED THE BEST QUALITY QUICKTIME MOVIE FOR DVD! THANKS FOR ANY ADVICE.

I just finished a three minute piece that will be shown on DVD and projected to a sixteen foot screen. I usually just output a self-contained quicktime movie with current settings and then compress with bitvice. While I'm happy with those results, because of the size of this screening, I'm curious whether there might be better options for output to quicktime, such as uncompressed, etc?
I've also heard that I could output as a Jpeg, or a PNG file, but I'd love some advice on what works best and the workflow, as I need to get this done fast and can't really afford the time to experiment.
Any advice would be HUGELY appreciated. THANKS1

I usually just output a self-contained quicktime movie with current settings and then compress with bitvice.
That will provide the best quality ... the quality won't improve over what you had in FCP. Depending on your source media type(s), you may have had a better quality export IF you had edited and rendered with another setting.
-DH

Best Quality too big for DVD. need help

Hi,
I just completed a movie using iMovie. I compressed the movie as a Quicktime file at best quality and it is 6gb. I understand that this is too big for the 4.7gb dvd-r's i have.
I wanted to know the best way to get my movie to fit while still mainting the best possible quality. This project is very important and i need it to be able to play on a home dvd player tomorrow.
I'm using iDVD.
Can somebody please help me out.
Thank you so much

Hi Karl,
first of all: on this forum, my guess is, you are the one with the deepest insight in iMovie (one word: corrupted projects... oops, that was two).
BUT...
My job for more then 20 years is communication, advertisement as an example. make the message in less then 8 words...
Apples says: 60/120 minutes of an iM project fit on a dvd-r.Full stop.
that is from my p.o.v crystal-clear..HOW is this done? easy: make project, click "iDVD" - BOOM! done... to quote the CEO of a small computer company...
people buy cars without ANY idea, what ABS, EPS, etc is, besides HOW it works. they use it. full stop. anyone any idea, what happens, when you push the pedal...? ... when the car DOESN'T accelerate, you realize, you have NO clue...-
funny enough, this forum is CROWDED with people, who don't own a driver's license, but try to explain, the car manufacturer has done big bugs, lots of mistakes, should fix that & this.- you CAN use a car, to boil eggs, iron your shirts and create a painting... but THAT would need a better understanding of how a car works.
topics which are/can not understood lead to what the behaviorism calls "superstitious behavior" - you do some really weird things, because you believe it has any effect....
so, sometimes, less knowledge leeds to better results
(from a communicator's point of view)
I agree, maybe the "help" files should offer an "expert" mode....

Poor Quality when Exported for DVD

Hi,
I am creating a dvd of some animations, and the animations are videos of what were originally all vector shapes and text. The videos were originally made with After Effects, at 720x480, NTSC preset. I can export from after effects at full-scale with with no problems, but once the comp tries to go into NTSC mode (where it squishes it to 640x480) the whole thing becomes ruined. All text becomes illegible and many vector objects get jagged edges.
I have tried exporting from after effects as well as bringing it into final cut pro and using compressor at 2-pass (Best Quality 90 min DVD preset), and no matter what I do the resulting video is always horribly deformed... Any idea what I need to do differently?
thank you.

thank you for your help.
I am viewing this on a computer display. I've been switching between a powerbook and a g5 with cinema display.
In AE I typically use apple animation codec, but I have also been trying it as an uncompressed avi and and uncompressed quicktime. By bringing the file directly from AE to compressor and changing from vbr 2-pass to One Pass CBR it has greatly improved the quality, still it does have some pixelation that I can't get rid of, even at the full 9mbps bitrate.
My understanding was that I wasn't bringing it into square pixels that I was using the DVCPRO/NTSC preset which formats it to a 4:3 ratio (which is what I think Final Cut also is doing), either way, by not doing that in After Effects, and by changing to CBR it is definately an improvement.
One more thing I should probably mention is that the videos are actually programs I have written and so they are being captured using a screen-capture to video utility called iShowU. The program seems to be good, and I am using an NTSC preset.
Any ideas as to what I can do to get these to as good of quality as their apple animation quicktimes?
the dvds I am assembling are only about 45 minutes.

Working with HD and SD clips for DVD Project

I am working on a project in FCP and I have clips that were shot with both SD and HD camera's. The SD was imported to FCP using the DV NTSC 48kHz Anamorphic setting and I have yet to import the HD footage. The HD footage was shot on a Sony Z1U using HDV 1080 60i.
The final project will be put on a DVD but I was just wondering what the best way to deal with both SD and HD footage? What type of sequence setting should I use when combining the clips? Any other things I should consider before starting on this project? Any input or ideas would be appreciated.

You might as well bite the bullet and put the hd into an SD sequence. The dv will look TERRIBLE if you try to blow it up, and when going to DVD, it'll only be 720x480 anyway. The only upside of this is that you can correct any framing issues with the hd stuff-- you'll have a lot of latitude for repositioning shots.

Help with Format for DVD Project

I have been using FCP to create video with two tracks of audio (one instrumental & one vocal).
I want to learn about format for output to DVD. I have exported as QuickTime movie and stereo downmix so that I have one track of audio in DVDSP and when it plays on 2 speakers I have the two channels of audio - one on instrumental, one vocal. Cool. To get that I must use Custom Settings as I learned from another thread posted here last week or so.
Question #1:
+What format do I use when I enter that custom setting window for the Aspect Ratio?+ I think it should be 4:3, yes?
Question #2:
Maybe I should be using Compressor. If yes - +how do I get those 2 tracks in FCP to get into that stereo downmix format? How do I get the 2 separate audio files in to compressor and output to DVDSP?+
If in that process I end up with 1 video file and 2 audio files and import those assets into DVDSP, +Will I be able to have one audio track that has 2 channels? or will I be able to have 2 audio tracks that play on two different speakers?+
I seem to be able to get the results I want most of the time, but I am basically phutzing around and somehow God honors it - I wish I knew more what I was doing.

smidi wrote:
Question #1:
+What format do I use when I enter that custom setting window for the Aspect Ratio?+ I think it should be 4:3, yes?
Depends on the source material, if it is 4:3 then 4:3 would be proper if it is 16:9 (HDV or anamorphic would in all likelihood be the ones you are using (?) then 16:9 would be the aspect ratio
Question #2:
Maybe I should be using Compressor. If yes - +how do I get those 2 tracks in FCP to get into that stereo downmix format? How do I get the 2 separate audio files in to compressor and output to DVDSP?+
In older version of AC3 encoder (a.Pack) you could use two seperate files in and assign left right
To export each side individually you should mute one audio track then export the other then reverse to get the other file (also look at page IV-147, IV-151 of the Final Cut Pro Manual - Chapter is called Exporting Audio for Mixing in case we looking at different versions)
But if you bring the two audio files into DVD SP like that you will hear only one audio track (in DVD SP) at a time.
If you take a look at Chapter 7 Page 96, Page 100 of the PDF (at least in the PDF I just popped up, not sure which Compressor you are running, it is in the section Creating Dolby Digital Professional Files) it describes the encoding selections a bit more.
Are you running into an issue? Sounds like you are not (which is good )

Bad Quality of Service for a new customer

I am very disappointed in my experience today.

Many thanks guys for professional Input!
My question based on following problem:
At SXMB_MONI all PO messages succssfully processed but no messages deliverd to the Vendor.
After deeper checks i detected following:
At Component Monitoring I see the respective Communication Channel in yellow with description "Channel started but inactive". So far as i know ... that means ... no messages was processed up to now!
At Message Monitoring i found a lot of PO Messages in Status "To Be Deliverd".
The last entry at Audit Log sounds "The message was successfully retrieved form the queue".
Message restart doesn't work! So i thought on message blocks the whole Adapter queue.
Do you have any solution for me?
Many thanks in advance!
Regards,
Jochen

What are the best quality settings in encore for DVD production?

Hello everyone,
I'm Paul. I was working on a HD PROJECT 1920 by 1080 30p 50mbps. I export it is using h.264 codec which produce mp4 file in pr pro cs6. When I import it in encore and export to DVD. The quality gets so dull and blurry compare to other DVD. I did not make any changes, just import and burn. It would be very helpful if some one can suggest highest quality possible settings for DVD. I even exported my project to mpegdvd. Then tried burning it with Nero 11. Every time I get error message saying, " some of the files cannot be written on the disc" and the quality is even worse if I use encore with this file. Today, I gave a try to Amrisoft DVD creator and the quality was awesome. I did nothing just imported mp4 and it burned it on the DVD. But I want to use encore since I bought the the whole production package. Thank you.

You do realize, don't you, that H.264 isn't a supported CODEC on DVD? Blu-ray, yes. DVD, no. And the top bit rate for DVD is 9.8Mbps IIRC, but a more practical limit is in the 7-8Mbps range. Maximum resolution is 720x480 in NTSC contries, and 720x526 in PAL countries, again IIRC.
So if you are coming to a DVD with 1920 x 1080 30p source at 50Mbps, a lot of information gets thrown away to make a DVD. Maybe 90% gets trashed. So it shouldn't be surprising that the resulting video looks "dull and blurry" in comparison. It should if you're only looking at 10% of the source data.
When I've done work something like this -- making DVDs from HD sources -- I typically set AME for MPEG-2, a max bit rate of around 8Mbps, a target of around 7Mbps, and let AME do the down-sampling and re-encoding as it will. The resulting DVD looks pretty good to me. Not anything like as good as a blu-ray, but played in an upscaling blu-ray player it looks reasonably good.
Now, it is possible to export small amounts of HD source (less than about 15 minutes worth) to DVD in blu-ray format. DVD players will choke on it since it's a foreign format, but some blu-ray layers will play it. Looks just like blu-ray for the short time that it will play. I've never done this myself though so I can't tell you how to do it.

Subject : Slideshow looks bad Hello guys I have a project in my Final Cut just about done. I want to add my slideshow as part of the project and burn it to DVD. In my slideshow, there are some stills from the movie clips and some downloaded from the i

Subject : Slideshow looks bad
Hello guys
I have a project in my Final Cut just about done. I want to add my slideshow as part ofthe project and burn it to DVD. Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it. Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow. Thank you
PSC

Thank you Ross.
The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto. The Final Cut project was rendered prior to export to QT, the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not. The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not. I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536. Please enlightenme. Once again, thank you so much,I really appreciate the time you offered.
psc

How can I save previews for old projects, while burning the project to DVD?

I'll admit, I haven't read the user manual cover to cover (or screen to screen for the electronic version), and haven't spent hours combing the discussions here, but I have searched for all the relevant keywords I can think of and can't find a concise answer to this question.
I get the basic idea of Vaults (I think), but haven't found much info about long term storage of projects. I'm fulltime freelance, but not super busy, and I can easily generate 100,000 images each year. I don't have the cash to be keeping all of these images in Aperture projects on external hard drives for eternity, and I'd be surprised if anyone else does. Good thing I'm not a medium format digital shooter producing 50GB each day huh?
I remember seeing a clip of a photographer 2 or 3 years ago discussing the differences between storing digital and film images. He was making the point that throwing away files you don't think you'll need again can be a mistake, citing a shot he had of Clinton and Lewinsky together, before Clinton and Lewinsky were news. "If I'd been shooting digital, that image wouldn't exist today". It was a great pic, and when that whoel scandal erupted, it made him alot of money.
So at present I'm storing every image I take in finished projects on DVD trusting that in the future I'll be looking for a shot of someone I may have shot 5, 10, 15 years ago.
I caught part of a discussion that talked about keeping the preview files for all the images (and subsequent versions) for each project. I'd love to be able to keep lo-res previews/copies of everything I've shot to date, and have them immediately accessible on my hard drive, while my full size projects are safely stored on DVD, taking up space on a bookshelf rather than on my hard drive. Loading 10 DVD's worth of projects to see what's inside them is a headache I'd like to avoid if possible, in favour of instantly checking out lo-res previews to look a shot up.
Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?
20" iMac and G4 Powerbook Mac OS X (10.4.8) "A creative and dynamic professional" (I lie alot and can't sit still)

hello, kiwi
quote: "Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?"
yes.
maybe,...
1. you might think of making DVD backups first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
or,
2. bring in the photographs to hard drive first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
the low rez Previews will stay in Aperture but the high quality Versions will be exported onto DVDs and gone from the hard drive (if you delete the originals).
another way would be to export small about 50-70 pixel wide high quality jpegs to a folder on your Desktop and import & keep these in Aperture Library as a reference. make metadata to show where the original Project DVDs are stored and DVD filing system used.
victor

Wanting highest quality result for DVD

I intend for my projects to be viewed on TV. Are there 'essential' steps and or settings I need to pay particular attention to in order to have a crisp clean product? For instance, during ...
Capture
Production
Exporting/Burning
These are not necessarily artistic projects, home video of children, christmas', vacations, etc - just want a respectable result.

I use both iMovie 08 and iMovie 06, if I want to make a DVD I prefer iMovie 06. iMovie 08 is not as DVD friendly as iMovie 06.
iMovie 08 has replaced "Share to iDVD" with "Share to media browser". Also iMovie 08 cannot set chapter markers, this has to be done with another program.
When using iMovie 06, one mouse click will set a chapter marker EXACTLY where you specify. In just a few seconds set all your chapter markers. When you are done editing just "share to iDVD 08" and all of your chapter markers will be there!
iMovie 06 and iDVD 08 is a terrific combination.
Your primary workflow is editing DV clips and making DVDs, iMovie 06 is better suited. Your movie will arrive at iDVD 08 in DV format, which is an ideal match for making a DVD: same resolution, same pixels aspect ratio, and original quality. If you share your movie from iMovie '08, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
Apple includes iMovie 06 as a free download to iLife 08 owners. (THEY WANT YOU TO HAVE IT!)
http://www.apple.com/support/downloads/imovieHD6.html
The Web site below has a good comparison of iMovie 08 and iMovie 06.
http://www.geethree.com/slick/imovie8.html

Bad quality in dissolves for DVD project

Similar Messages

Maybe you are looking for