Bad Repoussé and material files

When I open Photoshop I get 2 error messages:
This Repoussé file is bad or corrupted.
This material file is bad or corrupted.
Photoshop works fine but it's just those two annoying messages.
I tried to uninstall and reinstall Photoshop and I still get those messages.
Thanks!
OS: Windows 7 Ultimate, Serive Pack 1, 32 bits
PS: Adobe Photoshop CS5 Extended, Middle Eastern Version, 12.0 x32

Hi,
I don't know if the ME version has different files for these 2 defaults. I also only have a Mac machine at present so I can't check on things right now.
In the application folder> Presets> Repousse and Presets> Materials copy those files to your desktop and try relaunching.
regards,
steve

Similar Messages

Dynamic bad and Log file names!!

Hi

Hi
I have the scenario like the data files would be passed as parameter to the mapping , and the mapping would have the premapping procedure which would change the file name in the external table definition. This works fine. But the one more issue I have is that, I would like to change the bad file,log file and discard file name also through this procedure. In other words, for each incoming data file I would like to create a bad ,log and disc file.So How do I accomplish in the present procedure which does the following alter table statement
execute immediate 'alter table '||p_table_name||' location('''
||p_file_name||''')';
Any suggestion would be greatly appreciated
Thanks
Balaji

BAD UX, accepting and cancelled files in chat

Am I the only one who has issues with the new files download in conversations?
(accept, cancelled)
It is so PC, you click on it, it doesnt reply ( take ages) and if you click again (because you think something went wrong) it gets cancelled.
What smart ass puts the cancel button at the same place as the accept button, if he knows their system is so slow?
What are your opinions? Have you experienced the same issue?

Somebody in Adobe Corporate $$$ really needs to "experience" Adobe chat and online "support", or at least read a few of the transcripts. Those people are un*&^%$@ believeable.
I just had to do a "clean" reinstall because I replaced a hard drive. I needed a simple "Challenge Code" to complete the install because I was installing an upgrade and I wasn't in the mood to install CS3 and CS4 only to have to unisntall them.
Rahul said it was a "bad" number and that I should reboot, install again and come back and wait in line some moer (only 4 hours this time).
I suggested that he check is own typing.
Wonder of wonders, my code was suddenly "good" and I got the 6 digit code I needed.
These foreign "support" people either do not read or do not understand the information that is provided to them, or they are not paying attention, or they jsut don't have enough grasp of the English language for the job they've been hired to do.
It took all of 10 minutes to reinstall and update Edius 6.5. I took all the rest of the day to get through the Adobe reinstall.
Sony and Grass Valley have US based support.
Adobe Support will be the downfall of Adobe, and not competition or the economy.

After installing Mt.Lion on my 27" iMac (2010), my copy/paste and move files would no longer function after a few minutes of use. I re-opened in Safe Mode and found everything okay, so I was told it was a bad extension. Now what do I do?

I have tried to look for an extension like Air Print Activator, which I tried and ignored. I thought it might have some timing method that would stop my copying and pasting and moving files after a minutes ot two. So I re-installed the latest version and "uninstalled" it, hoping it would then remove an errant extension. But that didn't help. It seemed to start when I first tried out Mail and moving new emails into their mailboxes after reading. I tried to figure out how to do a Clean Install, too, but it would not allow me to "move" the InstallESD.dmg to a USB disk, "resource busy". Everyway I turn, I'm blocked from carrying out a method of finding the culprit, short of starting from scratch -- but losing years and years of mail, files, receipts, etc. It's just too much to sacrifice. I have no idea what to do next, since I have no idea what extension is causing it or how to isolate and destroy it. Any suggestion would be much appreciated.

You can try repairing the boot drive, Since you are running OS 10.6.8 you will need the OS DVD. Do you have it?
Please post back if you do, and need directions on how to do the disk repair.

SSD for Media Cache and Preview files ...bad idea?

Hi guys!
Today I killed my 3rd SSD.I used both of them for store Media cache and preview files with Premiere Pro and After Effects CS5.5.
1st was OCZ Vertex 3 240GB than I replaced to a new one.After few weeks later the 2nd OCZ Vertex 3 dead.
And now Corsair Force 3 is gone.I dont worry because all of them still in warranty period, and I havebackup from my projects.
Just asking maybe these SSD-s is not stable for this thing? I mean often write and read datas?
Maybe better to replace to a simple HDD (maybe 10000rpm)?
Or just I was that lucky guy who catch 3 defected ssd-s in the last six months..:-(

No, I don't think that you killed them; the OCZ Vertex 3 series, and many other SSDs using the same Sandforce controller, are having way too many issues where Adobe is not being used at all.
Do check your firmware on these drives too; there have been lots of updates trying to make these seemingly seriously flawed drives work more reliably.
Regards,
Jim

Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

Hi friend,
i have issue regarding mandatory self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
Regard's,
shaikh Khalid.

Hi Shaikh
First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
Nabheet

PO print OUT And material Document Print Out is coming In English

HI all.
I have Created Vendor In ZH(chinese Language,)and in material master I have maintained description in Chinese language.
I'M taking PO and material Documents print outs in Chinese Server log-in.
even Though Im taking Print outs in Chinese Log-In server, IM getting Print outs in English Language only not In chines language..
At the Time Of PO creation the Communication Language is ZH(Chines)..
I have read some related post even 89899..
But I have not find solution
plz help me.
thanks and regards
ramesh reddy.'

Check SAP Note 894444 - Tool for server-based printing on Windows (SAPSprint) for your requirement,
Installation
Before you install SAPSprint, delete SAPLPD manually. To do this, you normally need to completely delete the installation directory only. If you installed SAPLPD as a service using the srvany tool, you can remove the service by calling 'Instsrv SAPLPD remove'.
You can download SAPSprint as a self-extracting executable file from SAP Service Marketplace:
1. Entry by Application Group (on the left)
2. SAP Frontend Components (on the right)
3. SAPSPRINT (on the right)
4. SAPSPRINT <Release> (on the right)
5. SAPSPRINT <Release> (on the right)
6. Win32 (on the right)
Start the program. After you enter the installation path, the system prompts you to enter the TCP/IP port.
Normally, the default setting of 515 is suitable for the port. You should only change this setting if the Windows TCP/IP print service is also running on the computer. The SAPSprint Windows service starts as soon as the installation is over.
We recommend that you set up the following options for the service in the Windows Service Control Manager:
The service should run under a domain user that has the relevant authorizations for the required printers. After the installation, the service runs under "Local system account". This can access locally-defined printers only. You can set the user in the Windows Service Control Manager, in the options of the SAPSprint service.
If you want to delete SAPSprint, you can do so using the normal Windows uninstall tool.
We recommend that you install the SAPSprint service on a separate computer and not together with a SAP system, especially if you use a large number of printers. All printers that SAPSprint uses must be installed on the SAPSprint computer. This applies particularly to released printers from other computers. These should be installed as a queue on the SAPSprint server.
Also note further settings in accordance with Note 1069483.
Settings
You can display the call parameters available for SAPSprint by calling 'sapsprint -?' on the command line. The most important parameters are those that set options, especially log options for troubleshooting.
You can set the log level to 5 by specifying 'sapsprint -oi LogLevel 5'. Immediately after installation, no log level is set up, which means that no log file is created. By setting the log level to 1, 5, or 9, you can ensure that more information is available in the directory that you specified during the installation. A file called sapsprint.dbg and a print job specific file with a variable name are generated. The second file is deleted after successful printing. It is only retained if the printout is recognized as incorrect. If you set the option 'sapsprint -oi KeepFile 1', then both this file and the print file are retained. This is primarily intended for troubleshooting by SAP Support.
All options are case-sensitive. You can display the most important SAPSprint options by calling 'sapsprint -?'. All possible options are described in Note 85469. Normally, the options described there are not necessary - you should use them only in exceptional circumstances.

EMIEsitelist and EMIEuserlist hidden directories and dat-files

2014-04-05
Cross-posted from
http://answers.microsoft.com/en-us/windows/forum/windows8_1-security/erniesitelist-and-ernieuserlist/00407bd2-e349-423c-a8e5-cb6127840ea5
Original Post dated April 21, 2014
EmieSiteList and EmieUserList
Microsoft Security - Privacy Concerns
I found two unknown directories on my PC in my user profile. I have, so far, been unable to identify what put them there, which process owns them, and when I delete them (using Admin escalated privileges) they come back after a few minutes or immediately
after reboot.
     c:\users\USERNAME\appdata\local\EmieSitelist\container.dat
     c:\users\USERNAME\appdata\local\EmieUserlist\container.dat
     C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
     C:\Users\USERNAME\AppData\LocalLow\EmieUserlist\container.dat
It was time, anyway, so I wiped the drive using factory low-level overwriting and performed a clean install of Windows 8.1 Pro using a freshly downloaded ISO from Microsoft; one with an ESD distribution, written to a new just out-of-the-bedamned-hardshell-plastic
flashdrive..
I just completed the clean install, in this sequence:
Boot to flashdrive and let Windows create partitions then install. Reboot. Check AppData; no folders found.
Activate. Check AppData; no folders found.
Run first Update; install everything except Bing Bar and Desktop.    Check AppData; no folders found. Reboot. Check AppData; no folders found.
Add Feature Windows Media Center. Check AppData; no folders found. Reboot. Check AppData; no folders found.
Run Updates a second time. Check AppData; no folders found. Reboot. Check AppData; no folders found.
Remove MS C++ v12 x86 and x64 installed during Update.    Check AppData; no folders found. Reboot. Check AppData; no folders found.
Download from MSDN (http://msdn.microsoft.com/en-us/vstudio/default) Redistributables MS C++ x86 and x64, 2005, 2008, 2010, and 2012.4 versions, and install in sequence. Check AppData
after each install; no folders found. Reboot after each install and check AppData; no folders found.
Run Updates a third time. Response was No Updates Available. Check AppData; no folders found.
Reboot. Check AppData; all four sub-directories are now present.
These sub-directories and dat-files are not, so far, present in the AppData\Roaming directory.
There is nothing except Microsoft Windows 8.1 Pro WMC and the 10 MS C++ packages installed; and MS Silverlight and AMD (videocard) Catalyst Control Center on the machine. Windows Defender is present but is installed as part of Windows 8 and 8.1;
and its' updates are provided via the MS Update process. All - repeat ALL of these items are provided by Microsoft.
My questions are: What are the Emie directories for; what program created them, and what does the various container.dat files "contain"? And . . . if not absolutely necessary, How do I get rid of them and keep them from coming back?
First attempt at Solution:
Permissions are Full for System, USERNAME, and group Administrators. The USERNAME is the Owner, and Effective Permissions for each of the 3 is Full.
Open Command Prompt (Admin)
C:\Windows\system32>cd\
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
C:\>
BOTH Files and Directories are no longer Hidden. The Directories still show that the files within are READ-Only, but checking the actual file shows that it is no longer R-O.
I then deleted each of the 4 directories and closed Windows (File) Explorer.
After less than 3 minutes reading pages on the internet (at Microsoft's Ask Windows Community), I opened Windows Explorer to check and found that the sub-directories had re-created themselves in both the Local and LocalLow directories.
The container.dat files were back in the Local sub-dir and after another few minutes, also back in the LocalLow sub-dir.
Both the sub-directories and the container.dat files are once again Super-Hidden.
Analysis using Windows utilities and SysInternals and NirSoft tools have not identified which object or process or service owns these objects.
ADDED: My system is a home system, not connected to any work domain via VPN or otherwise. WHY is the Windows Update Team not spending time to implement condition-and-error-checking to ensure that unneeded updates, services, and changes are not made
without the system owner/operator permission? Further, WHY is this particular issue so hard to find info about; what is being kept from customers and why?

Dear sir Shovel Driver,
   About:  EMIEsitelist  and  EMIEuserlist
.., hidden directories and dat-files
Internet Explorer 11 (on Windows 7 and Windows 8.1) provides increased performance, improved security, and support for the modern technologies like HTML5 and CSS3 that power today’s Web sites and services. By adding better backward compatibility with
Enterprise Mode, Internet Explorer 11 now helps customers stay up to date with the latest browser—and facilitates using the latest software, services, and devices.
IE11 Enterprise Mode can be set in the Group Policy Console, or by adding a
Registry setting:
REGISTRY:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer]
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main]
"EnterpriseMode"="Disable"
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main\EnterpriseMode]
Or a edit a Group Policy setting, which you can find under:
[Windows-Key]+[R]->[Run]->Type here:
   gpedit.msc
Press [Enter], with an UAC Warning:
Do you want to allow the following program to make changes on this computer:
gpedit.msc ?
Select/Press: Yes
Go to in the Left pane of the GPedti.msc Window:
  Computer Configuration
  Administrative Templates
  Windows Components
  Internet Explorer
Change / Add at right list, down under:
  "Use the Enterprise Mode IE website list"
Set this option to - whatever you need; Disabled,
Enabled (Default is: Not Configured)
When Enabled, you need to add a list with Web-Sites, Domains or Web-Pages.
This policy setting lets you specify where to find the list of websites you want opened using Enterprise Mode IE, instead of Standard mode, because of compatibility issues. Users can't edit this list.
If you enable this policy setting, Internet Explorer downloads the website list from your location
  (HKCU or HKLM\Software\policies\Microsoft\Internet Explorer\Main\EnterpriseMode),
opening all listed websites using Enterprise Mode IE, Web-Sites are seperated by a sign: "
If you disable or don't configure this policy setting, Internet Explorer opens all websites using Standards mode.
Now to
properly close and conclude this
mystery:
EMIEsitelist and EMIEuserlist
.., are hidden directories and dat-files
Thses directories and dat files are used to store data for the IE11
EnterpriseMode.
It is not a: Virus, neither it is a Trojan, Hoax, KeyLogger or anything else bad.
TECHNET Sources:
Turn on Enterprise Mode and Use a Site List (Deploy):
http://technet.microsoft.com/en-us/ie/dn262703.aspx
What is Enterprise Mode?:
http://technet.microsoft.com/library/dn640687.aspx
If you find this usefull, please Vote at the button
"I Find This Usefull"
Thank you! ;)
Best regards, MPVS
MP|VS

File paths and archiving (and referenced files).

I've come to the stage where I need to start using referenced files (out of disk space on my laptop) and also start archiving projects. One of my plans was to start keeping an off-site backup of all the originals in case something really bad happened. I'm also going to have on-site backup of projects. But for the off-site originals I would like to have some simple way of finding the photos in case something bad happens, my idea was to simply create a PDF from the list view where I could see the photo and the file path to where it's stored (I plan to store them in simple year-month-day hierarchy).
The reason why I'm not going to archive the projects off-site is simply the cost, I did a test yesterday and it looks like just storing the originals would be approx 1/3 in size of the projects.
If someone has a better idea of how to handle this please let me knoe

I'll try to explain.
About the cost: Hard disk space is really cheap and I can not see how the cost should be that expensive. This is based on your statement that you still have your images on your laptop and that itself limits the amount of space hence a rather small library.
When it comes to backing up your projects you have several options. First, if you really want to be cheap about hard disk space (I think you should not since your images really are priceless) you can export projects of your referenced images and not consolidate the images into the exported project. Not to consolidate vs. consolidate images on export really makes a difference in the exported project size. On the other hand, not consolidate images on export of a project makes you back up your images separately, which leads to more work.
My advice is then; buy two disks (preferable three disks), and export your projects with the images consolidated into one of them and start using the other one with your referenced images.
I always advice users to have their images in at least three different locations and IMHO the ideal solution for you would be to have your images referenced on one disk and mirrored backups on the other two disks, either one stored in two different locations in case of burglary, fire etc.
Regards
Paul K

Best practice for how to access a set of wsdl and xsd files

I've recently beeing poking around with the Oracle ESB, which requires a bunch of wsdl and xsd files from HOME/bpel/system/xmllib. What is the best practice for including these files in a BPEL project? It seems like a bad idea to copy all these files into every project that uses the ESB, especially if there are quite a few consumers of the bus. Is there a way I can reference this directory from the project so that the files can just stay in a common place for all the projects that use them?
Bret

Hi,
I created a project (JDeveloper) with local xsd-files and tried to delete and recreate them in the structure pane with references to a version on the application server. After reopening the project I deployed it successfully to the bpel server. The process is working fine, but in the structure pane there is no information about any of the xsds anymore and the payload in the variables there is an exception (problem building schema).
How does bpel know where to look for the xsd-files and how does the mapping still work?
This cannot be the way to do it correctly. Do I have a chance to rework an existing project or do I have to rebuild it from scratch in order to have all the references right?
Thanks for any clue.
Bette

Difference between ASM Disk Group, ADVM Volume and ACFS File system

Q1. What is the difference between an ASM Disk Group and an ADVM Volume ?
To my mind, an ASM Disk Group is effectively a logical volume for Database files ( including FRA files ).
11gR2 seems to have introduced the concepts of ADVM volumes and ACFS File Systems.
An 11gR2 ASM Disk Group can contain :
ASM Disks
ADVM volumes
ACFS file systems
Q2. ADVM volumes appear to be dynamic volumes.
However is this therefore not effectively layering a logical volume ( the ADVM volume ) beneath an ASM Disk Group ( conceptually a logical volume as well ) ?
Worse still if you have left ASM Disk Group Redundancy to the hardware RAID / SAN level ( as Oracle recommend ), you could effectively have 3 layers of logical disk ? ( ASM on top of ADVM on top of RAID/SAN ) ?
Q3. if it is 2 layers of logical disk ( i.e. ASM on top of ADVM ), what makes this better than 2 layers using a 3rd party volume manager ( eg ASM on top of 3rd party LVM ) - something Oracle encourages against ?
Q4. ACFS File systems, seem to be clustered file systems for non database files including ORACLE_HOMEs, application exe's etc ( but NOT GRID_HOME, OS root, OCR's or Voting disks )
Can you create / modify ACFS file systems using ASM.
The oracle toplogy diagram for ASM in the 11gR2 ASM Admin guide, shows ACFS as part of ASM. I am not sure from this if ACFS is part of ASM or ASM sits on top of ACFS ?
Q5. Connected to Q4. there seems to be a number of different ways, ACFS file systems can be created ? Which of the below are valid methods ?
through ASM ?
through native OS file system creation ?
through OEM ?
through acfsutil ?
my head is exploding
Any help and clarification greatly appreciated
Jim

Q1 - ADVM volume is a type of special file created in the ASM DG. Once created, it creates a block device on the OS itself that can be used just like any other block device. http://docs.oracle.com/cd/E16655_01/server.121/e17612/asmfilesystem.htm#OSTMG30000
Q2 - the asm disk group is a disk group, not really a logical volume. It combines attributes of both when used for database purposes, as the database and certain other applications know how to talk "ASM" protocol. However, you won't find any general purpose applications that can do so. In addition, some customers prefer to deal directly with file systems and volume devices, which ADVM is made to do. In your way of thinking, you could have 3 layers of logical disk, but each of them provides different attributes and characteristics. This is not a bad thing though, as each has a slightly different focus - os file system\device, database specific, and storage centric.
Q3 - ADVM is specifically developed to extend the characteristics of ASM for use by general OS applications. It understands the database performance characteristics and is tuned to work well in that situation. Because it is developed in house, it takes advantage of the ASM design model. Additionally, rather than having to contact multiple vendors for support, your support is limited to calling Oracle, a one-stop shop.
Q4 - You can create and modify ACFS file systems using command line tools and ASMCA. Creating and modifying logical volumes happens through SQL(ASM), asmcmd, and ASMCA. EM can also be used for both items. ACFS sits on top of ADVM, which is a file in an ASM disk group. ACFS is aware of the characteristics of ASM\ADVM volumes, and tunes it's IO to make best use of those characteristics.
Q5 - several ways:
1) Connect to ASM with SQL, use 'alter diskgroup add volume' as Mihael points out. This creates an ADVM volume. Then, format the volume using 'mkfs' (*nix) or acfsformat (windows).
2) Use ASMCA - A gui to create a volume and format a file system. Probably the easiest if your head is exploding.
3) Use 'asmcmd' to create a volume, and 'mkfs' to format the ACFS file system.
Here is information on ASMCA, with examples:
http://docs.oracle.com/cd/E16655_01/server.121/e17612/asmca_acfs.htm#OSTMG94348
Information on command line tools, with examples:
Basic Steps to Manage Oracle ACFS Systems

Vendor and material assignment

Hi all,
Is there any possibility to assign vendor to materials or material to vendor? our user wants that while taking drop down for vendor in ME21N screen, only vendors who sales materials, mentioned in purchase order, will be listed down.
Any idea to do this?
Best Regards,
AI.

Hi Al,
Let me first clear that, vendor and material is possible through the Source List only in case of purchase requisitions i.e. ME51N and not in case of ME21N.
Still it can be achieved through minor ABAP developement. We can add IF statement in the BADI related to ME21N and give the selection criteria as you desired vendor and material combination, so that same material get copied to PO once you use the particular vendor. As its almost like hard coding, this is not very advisable, but if the requirement is stringent then this is one of the possible solution.
Moreover Vendor to material combintation is only possible and not material to vendor. As according to transaction flow one need to enter org data and vendor first before proceeding to the further data entry.
come back in case you need to know more.
bye,
sachin

Handling bad records in a file.

Hi,
I am using external tables for loading data from text files. I am doing it well. I came across a case, where some records are not good, those records are diverted to bad file.
In that case, we are losing the valuable data. We can do some validation and we can use it.
Could anyone please suggest me the way we could perform this.
And I have one more doubt. Using OWB we can create single external table for multiple files. I would like to differentiate the records of each file, by adding filename as one extra field.
Can we do this using owb?
Any suggestions are welcome.
Thanks and regards
Gowtham Sen.

Indeed,
OWB is not a magic tool, but just a good ETL tool that will do what you tell it to :)
You must first figure out what cases you come a cross, and then figure out what you can do to solve each strange case.
First of all, as has been pointed out, get all the data into your external tables. Avoid doing any type checking or casting at this case. just stick to VARCHAR fields (and perhaps NUMBER but even here I tend to use VARCHAR). Then, in a second mapping, try to get your data in to a staging table and there you can isolate the bad records, and perhaps allow for human interaction to correct the data if all else fails.
Regarding the files, you have before mentioned that delta loads are what you have to do. Unless you are running your loads in a "live" system where data is flowing in on and off during daily operations, then going for a whole refresh would make your life so much better (20 mins of loading during the night is quite a good deal, if it makes your loading logic so much simpler).
But, as you have said before, you need delta loads.
Using UNIX shell scripts, you can use the 'diff' command to create your datafiles. That should be quite straight forward. Otherwise you can perhaps use staging tables and the MINUS operator. There isn't always a quick solution.
Borkur

Collection of IDOC's and creating file

Hi,
I am working on one scenario collection of IDOC's for 10 minutes and creating file.
When my IDOC's are created in r/3 and reaching in an order and reaching the same order in XI as well,but creating of file for those idocs is not happening in the same order.
Its skipping some of the orders as well while creating file.
Basically i need to create the file in the same order as idocs are reached XI.I am using BPM for collection of IDOC's.
Would request your suggestions.
Thanks in Advance.
Regards,
Chandra.

Hello Chandra,
I am working on one scenario collection of IDOC's for 10 minutes and creating file.
When my IDOC's are created in r/3 and reaching in an order and reaching the same order in XI as well,but creating of file for those idocs is not happening in the same order.
Its skipping some of the orders as well while creating file.
Basically i need to create the file in the same order as idocs are reached XI.I am using BPM for collection of IDOC's??????
Eg: Take a Fallowing Requirement..
For Exmaple A background program should be scheduled to run every 10 minutes to analyse any material records that have been created or changed or deleted that have occurred to the material master records or Customer Records in the last minute.
There are two Message Mappings involved in the whole scenario. First mapping is N:1 Mapping which will be used in BPM and second Mapping is 1:1 Mapping:
1. First Message Mapping  N: 1 Mapping between IDoc (occurrence 0...unbounded in Messages tab) to IDoc with changed occurrence of its top node (IDOC) as 0...unbounded. This message mapping will be used in BPM transformation step.
Description: This BPM collects all Idocs for 10 minutes which are of Message Type (ZMATMAS05) according to Receiver Partner Number (Field RCVPRN) and calls N: 1 mapping to bundle the collected Idocs in a One External Definition for that IDOC.
Use
You use a wait step ( ) to incorporate a delay in a process. Usually, you use a delay to define when the next step in the process is to start. You can define a delay as either a point in time or a period of time.
At runtime, the step waits until the specified point in time is reached or the specified period of time has passed. The system then continues the process by proceeding with the next step.
Go through this Blogs::
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
/people/sap.user72/blog/2005/01/28/setting-up-inbound-qrfc-queues-for-serializing-idocs-using-the-idoc-adapter
/people/prasadbabu.nemalikanti3/blog/2006/02/24/collecting-and-bundling-vendor-records-from-different-multiple-interfaces-file-systempeoplesoft-and-sending-to-sap-r3-system-part-1
Thanks,
Satya Kumar
Reward if it is useful..

Copy and paste files from Windows Explorer

Hi everybody,
For a part of my application I need to copy and paste files and folders from Windows explorer to the vi shown in the picture.
Does anybody know how to implement this with the clipboard functionality.
Also drag and drop would be very nice (but thats maybe a later step...)
Best regards, Helmut

Hello Friedr,
drag and drop is the easy part!
Use a path control, this will naturally allow drag and drop. If a file is dropped on this a 'Value Change' event is fired! with this event you can load the data into the picture. To get a nice drag and drop functionality you should make the path transparent and resize to the size of the picture control. This will work fluently!
To use the clipboard, LV 8 has an functionality for this, I think it is an application event.
Success Ton
PS I didn't see you image maybe it was removed when you did a preview these have the bad habit of removing the attachments!
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Bad Repoussé and material files

Similar Messages

Maybe you are looking for