Balance carry forward profit center - detailed info

Hello team,
Could you please help me with the request?
Through transaction 2kek, the business does a carry forward of profit center values from a year to the other.
Is there a transaction that allows to check, profit center by profit center, the amounts that have been carried forward, account by account?
thanks for letting me know
regards
Hana

Hi Hana
I am sorry if I end up talking nonsense, But I dont have 2KES access on my system to check before writing this.
You can refer following sap notes, to check if it meets your requirement.
389610
- 2KES: The profit center field is missing in the log
674085
- 2KES Log with profit and loss accounts
I hope with both notes implemented, you should get the desired output.
Hope it is helpful
Regards
Mustafa

Similar Messages

Carry forward profit center balance- 2KES & 2KET

Hi,
can any one pls specify the difference betweem 2KES & 2KET relating to profit center balances carry forward, and also path for 2KET.
thank you.

Hi
2KET specifies whether the balances can be carried forward or not in PCA.Balance C/F is optional in PCA so if you decide of C/F the balance we first need to select C/F allowed radio button in 2KET.After this is done we need to execute 2KES to actually C/F the balances
Path for 2KET is SPRO>Controlling>Profit center accounting>basic settings>balance Carry forward-->Allow balance to be carried forward.
Regards
Sandy

Profit center balance carry forward

Hi,
If i post any profit center documents after i do the balance carry forward for the profit center balance sheet accounts to the new fiscal year, will the system update the opening balance of the new fiscal year automatically or i have to re-run the balance carry forward again to update the opening balances?

Hello,
You can run 2KES any time. Rerun the same before closing the previous year postings in PCA.
Regards,
Ravi

Profit Centre Accounting Balance Carry Forward

Hi
I used report painter to create my own report to show the TB by profit centre. But the when you drill down on certain balance sheet account the actual line items date back to as far as 2004. Is it because we have done a balance carry forward? How can we correct this? If we do a balance carry forward at year-end will that correct the problem or can we do it now?
Points will be awarded.
Thanks

Dear Noz
Can u plz tell me which version ur using?
I know the standard Transaction code which can be helpful ti u
Regards
Dnyanesh

Cost center and profit center details

Hi All
Is there any function module or BAPI to obtain cost center and profit center details
for a GL account. Actually I am obtaining the carry forward balance for a
fiscal year from the table GLT0 but I am not getting the corresponding profit center
and cost center details.
Please suggest a way forward!
Regards
Ankit

Hi,
If you are getting data from GLT0 table, using the Account number go to SKA1/SKB1 tables and get the CostCenter(KOSTL) and Profit Center(PRCTR). If you want to get details about CostCenter, its master table is CSKS and master table for Profit Center is CEPC. you can get required info from these tables.
thanks,
sksingh

Balance Carry Forward with New GL

hi,
I am trying to do balance carried forward using the new GL and I expect to see retained earnings splits by profit center and segment. I was able to run the program and see the revenue and expenses roll into Retained Earnings account split <u>by profit center</u>, however it did NOT split by segment. The balance in retained earnings account shows split by profit center with BLANK segment.
I have setup my configuration as:
- Turn on the business scenario to use Partner Profit Center and Partner Segment
- Specify the account range in the document split. I specified retained earnings account as balance sheet account
- I have setup segment as mandatory field in the document splitting configuration
- I setup the activate the document split and setup default profit center/segment
Can you tell me if I am missing something in the configuration or there is something wrong with the system.
Thanks, Tony

Hi,
Voor profit centers you have to run the balance carried forward in PCA.
Paul

Where to find the Opening Balance Of a Profit Center

Hi,
Which report can i use to check the opening balance of a profit center which is carried forward from last year for a balance sheet account?

In period 0, Balance Carried Foward program ( TA 2KES ) is run in PCA. Note that this carried forward balance will only be updated in GLPCT and not GLPCA. Thus, in period 0, the opening balanes are stored. You may create report painter or SAP query to find out these balance.s

Financial reporting and balance carry forward at Line item level

Hello
We are in the process of implementing a new GL and using it to create Balance Sheet and P&L statements in BW.
We have installed the new datasource for GL line items 0FI_GL_14 and loaded the data to a DSO. Installed the 0FI_GL_10 (totals infosource) as well.
Also we created a custom infocube on the line items DSO and want to use it to report against a Financial Statement Version. In order to do that we created a
virtual cube with the FM and added the necessary Financial Statement Item and other key figures in the virtual infocube.
Now I want to know is it the correct way to create financial reports?
Can we load totals and Line items to the same infocube? Do we have to load totals to a different DSO/Cube or same Cube?
How do we address the Balance Carry Forward on the Line items cube? Since the balance carry forward is done on totals only, and the cube I created is a detailed cube is it possible to carry forward balances at that level?
Also can someone let me know what is the best approach to create financial reports and give drill down capability at the document level?
Thanks in Advance
Raju Kosuru

Now I want to know is it the correct way to create financial reports?
NO .. Its not.
Can we load totals and Line items to the same infocube?
NO
Do we have to load totals to a different DSO/Cube or same Cube?
Yes.. SAP has delivered C10 for Totals and O14 for line items... No point in creating cube for line items i.e. on top of O14.
Balance carry forward can be done on totals only (that is how totals extractor _10 is designed), U can not do that on the Line items. Pls contact functional consultant for clarification
Best approach is RRI (Jump targets) for _10 report to _14 report to give drill down capability at the document level.

SEM: BCS Balance Carry Forward - Concept of Period 00

Gurus:
Wants to clear a concept with you. Say for example at the end of Period 12, 2006,
B/S Account 1: $100,000
Retained Earnings: $ 200,000
And only for the Period 1, 2007:
B/S Account 1: $200 (this is a periodic value)
And Net Profit: $15
Now lets assume the Retained Earnings of Current Month = RE Last Month + Net Profit.
Now if we dont do a Balance Carry forward after Period 12 close and before Period 1 close, I will be getting this only for Period 1,
B/S Account 1: $200
Retained Earnings: $15
But if we do a BCF after Period 12 close and before Period 1 close, I will be getting this only for Period 1,
B/S Account 1: $100,200
Retained Earnings: $200,015
So the BCS gets the value in period 00 and in backend add it to period 1 to give a cumulative period 1. Period 00 is a virtual place holder for this and not be available for reporting.
Am I correct?
Thanks for your time spent,
Regards,
Arpan

Thanks Eugene!
I am sure you are correct, but not able to understand the answer for my this question from the thread you mentioned. Was thinking of BCS & period 00 concept and trying to confirm my understanding. Sorry for not able to pick up the loose thread. Still open..
Sincerely,
Arpan

Balance Carry Forward issue

When doing a balance carry forward, the retained earning accounts carryforward is appearing under the P&L carryforward as opposed to the balance sheet process. Due to this, the retained earnings carryforward is only happening at the GL account + Co Cd level (and PCA if doing a PCA carry forward). WE need it to be in the Balance Sheet carry forward so it can be rolled over at a more detailed level (namely Trading partner, Transaction type etc).
Since retained earnings account is a Balance sheet account, it would be safe to assume that it would appear under the Balance Sheet carryforward process. However, because that is not happening and its being included in the P&L carryforward, manual reclass entries need to be posted with the correct code block elements.
Does anyone know if this is something maintained at a configurational level? Any help would be highly appreciated.

At the year-end, you "roll over" all of your P&L account balances to the retained earnings account (which is a balance sheet account) so you could show the P+L result in the balance sheet in the equity section. It is very logical that you see the retained earnings account in the P&L carryforward. In FS00, all of your P&L accounts have a retained earnings account type (X, e.g.) that is linked to a GL account (which is the retained earnings balance sheet account). Balance sheet accounts in FS00 are not assigned to any retained earnings acct type.

Balance Carry Forward in New GL - Substitute RMVCT

Hi,
We have assignet the Consolidation Scenario to our main ledger in New GL, so that the field RMVCT is part of the FAGLFLEXT table.
We would like to have a unique movement code in the balance carry forward, for example F00.
We can map any filled movement code to a specific carry forward movement code, that's fine (table T856 allows that in the definition of the movement code).
But, and that is the issue, for balance sheet account without movement code, the balance carried forward has also no movement code, and I don't see the way to substitute the value to get F00 also for these account (there is no BSEG entry for the balance carry forward operations).
Thanks for an anwser.

Hi,
Voor profit centers you have to run the balance carried forward in PCA.
Paul

How SEM BCS handled balance carried forward?

Hi,
I would like to find out how SEM BCS handled balance carried forward?
Income statement
Profit after Tax - 50
Balance Sheet
Retained profit (last year) - 100
Current Year profit - 50
How do i configurate 'Profit after Tax' = 'Current Year profit' in workbench? Is BCS going to store the computed results?
Balance items (ie 'Retained profit (last year)' and 'Current Year profit') by default are carry forward to next year in BCS.
Do i need to configurate 'Current Year profit' add to 'Retained profit (last year)'?
Pls advise.
Thanks.
Regards, Renee

Hi Renee,
By default, the balance sheet items are to be carried forward to next year. If you dont make any settings, both items, Retained profit (last year) and Current Year profit will be transferred to themselves, that is not correct.
You need to show the system which items are to be carried forward not to themselves.
To force the system to make the proper transfer, in UCWB go to Consolidation Functions -> Balance Carryforward -> Items to be Carried Forward.
Enter there the following information:
<b>Orig. Item__________Debit Item_______Credit Item</b>
Current Year profit____RE (last year)_____RE (last year)
Do the similar operation for all items to be carried to other than themselves items, for example dividends of the current and last years etc.
Hope this helps.

Budget balance carry forward to new year fiscal year

Hi,
Currently, our setting for Funds Management Master
Data is year-dependant. Now, our user request for a budget carry
forward from one year to another year. So, we are trying to the fix the
configuration.
My question is, can we do the budget balance carry forward if the master data is year-dependant. If can, how to do that?
For your information, our system is SAP R3 version 4.7C and using the BCS.
Appreciate your advise on this matter.
Thanks and regards

Hi,
copy cost center planning:
kp97 - copy plan to plan
kp98 - copy actual to plan
Internal order copying
ko14 - copy plan to plan
ko15- copy actual to plan
all the best
prasad

Sales and purchase journal - balance carry forward to next page

Hi all,
When we run sales and purchase journals in transaction S_ALR_87012357 (Belgium) and print it we want a summary per page and balance carry forward to next page.
The paging is correct by selecting "statistical info not printed" in output control but we don´t want only summary on last page, instead on every page and a total summary on last page.
Does anyone knows how to mangage this?
Best regards Lisa

With a developer implement a the BADI FI_TAX_BADI_010

Logic to get customer balance confirmation at profit center level.

Hi All
Please help me understand the logic to get customer balance confirmation at profit center level.(not at company codewhichis available)
On what basis developments can be done.
Detailed and early Inputs will be appreciated
Thanks in advance.
vadapav

Hi
First of all, I liked your user name...
I have a basic question with regards to your requirement... Customer is an external party... he has got nothing to do with your internal definition of profit centers..
Hence, if Customer A is buying goods from you belonging to Pr Ctr B and C - He wlil expect you to send a balance conf letter which aggregates total balance... He will be, in no way, concerned with your internal division of profit center wise balance
Still, if you would like to go ahead with your requirement , then identify the open line items from BSID or BSAD (I dont know which one of these stores open line items) , Take that document no to table FAGLFLEXA and identify your profit center... This is assuming you are on ECC 6.0 and use New GL
If you are not on ECC 6.0, then identify the open line items from BSID or BSAD and Take that document no to table BSEG and read the profit center from revenue line item.. These revenue accounts can be included in a SET created in GS01 rather than hard coding in the program
Regards
Ajay M

Balance carry forward profit center - detailed info

Similar Messages

Maybe you are looking for