Balance sheet with alternative reporting period

Hi everybody,
I need to know if there is a report that allows to extract P&L data for an alternative period (eg. 07-2008 to 062009) for companies that have as financial posting period the annual standard from period 1 to period 16.
The report must allow me to exclude year-end closing postings.
Thanks.
Stefania

I posted a resolution about three or so months back
Basically create a new infobject of account with a compound of co code - and a nav atts of alternate coa and alternative gl account
This is to reolve the m:n realtionship of account to local account (ie it is different per co code)
Create a bespoke extractor of SKB1 or extend the current one - and then add the compound object to your cubes

Similar Messages

  • Recreating Balance Sheet with Crystal Reports

    Hello everyone.
    I need to recreate the Balance Sheet report with Crystal Reports.
    Which tables have the information I need?
    Thanks in advance!

    You may check this thread:
    Re: Recreating Original Reports with Crystal Reports
    All financial reports source data are extracted from those tables mentioned in that thread.
    Thanks,
    Gordon

  • Balance Sheet , P&L Report Drill Down Reports

    Hello Experts,
    One of my client requires Balance Sheet, P&L Reports with drill down capability.
    Ex: In standard B1, When you run a balance sheet you will see summary of accounts. Client needs to look into the details from summary report by drill down capability. Have anyone worked with same reports before? Please help.

    Hi Praneeth,
    On the balance sheet, on the top right corner there is a field called - Level - on which you can select 1 to 5 levels. The level 5 gives the complete picture of each account. Same for other financial report like trial balance. Hope that solves your problem.
    Thanks,
    Kanu

  • Discrepancy between Balance sheet and Aging report

    HI Experts,
    I have a client who run the AR Aging and Balance sheet monthly for as their month end procedures.
    They have found the following:
    When the Balance Sheet and Aging report is run on the same day this shows the same on the Accounts Receivable and the Aging report.
    When the Aging is run a few days after the month end, and the Aging Date is selected as 05/01/2010, the Posting Date untill is also 05/01/2010, the Balance Sheet To date is 05/01/2010 I get discrepancies between the 2 amounts.
    I looked for documents with later Posting/Document dates but could not find any in the aging report.
    Any help would be welcome.
    Marli

    Hi Marli,
    You may check these threads:
    Re: Mismatch in  Accounts Receivable Balance and A/R Aging Balance due
    Re: customer aging query - show balance as of a specific date
    Thanks,
    Gordon

  • Generation of balance sheet with closing exchange rate

    Hi all
    We have been using INR as the local currency and USD as the functional currency
    all the reports are generated in INR and USD.
    And  as of now monthly average rate is been entered in the exchange rate table master.
    But for audit purpose we need to generate balance sheet with the closing rate. how can we do the same in sap business one
    Regards
    Farheen

    Hi,
    Just use "Conversion Differences" function in Financials Module, this will convert INR into USD by posting adjustment JE.
    This function is relevant for companies whose defined system currency is different from the local currency. SAP Business One recommends making journal entries automatically for differences in system currency. Use the Conversion Differences function to make adjustments between the account/business partner balance in the system currency and the balance in the local currency.
    Hope this helps,
    TVSon

  • Diff. GL balance (FBL3N) with asset report (s_alr_87011963).

    Dear Experts,
    There is a certain asset class (Computer) which is not tally to the GL balance. What is the possible reason to check?
    I am verifying the GL balance (FBL3N) with asset report (s_alr_87011963).  please refer below table.
                               furniture
    Particulars
    2014
    As per F.01 (BS)
               1,098,675.23
    As per Report S_ALR_87011963
               1,097,045.98
    Furniture
               1,098,675.23
    Difference
                     (1,629.25)
    Please help me to resolve this difference issue.
    Thanks in Advance.

    Thanks for your valuable reply,
    i have found two line items in GL balance that are not showing in asset report (which is difference amt Rs. 1629).
    The document Type is "AA" of below entries.
    1. Vat retention @4% for Rs. 1000/-
              asset ac  - Dr             1000
                    Input vat capital Cr -
    2. Vat retention @4% for Rs. 629/-
              asset ac  - Dr             629
                    Input vat capital Cr -
    Report is showing all documents(entries) of Doc type "AA"

  • Balance Sheet/Income Statement Report using SSRS

    I am trying to create a balance sheet, income statement report using ssrs. Due to lack of experience, I am seeking some help from someone who has already built one. For the report I am trying to built, the data isn’t readily available
    in a master/detail format. I need to connect to an Oracle DB, run one or more stored procedures (in Oracle) to put data in a temporary/run-time table (reporting table) and read that data to create the financial statement.
    Any help or guidance would really be appreciated.

    Hi Khaga,
    Adding to Vishal's reply, before we can connect an Oracle data source, the system administrator must have installed the version of the .NET Data Provider for Oracle that supports retrieving data from the Oracle database. This data provider must be installed
    on the same computer as Report Builder and also on the report server. To retrieve data from an Oracle database, we can use Oracle or OLE DB data source type. For more details about the connection string, please see the following document:
    http://msdn.microsoft.com/en-IN/library/dd220591.aspx
    Besides, we can refer to the following SSRS tutorial about create a basic report in Reporting Service:
    http://msdn.microsoft.com/en-IN/library/ms167305.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Balance sheet in two diff. period wise view

    Dear Experts,
    Good Morning !
    MY company is in India but the mother company situated in France. We have implemented SAP in India as Indian localisation and fiscal year  set as April to March. Now in France Database I wanted to see balance sheet in two different period wise, first January to Dec. and secondly April To March.
    So how should I close my Period End closing so that I can see Balance sheet in both diff. periods.
    Any suggestion on this matter will b highly appreciated.
    Regards,
    Ravi

    Hi,
    Check this thread:
    http://scn.sap.com/thread/1713294
    Thanks & Regards,
    Nagarajan

  • PCA Balance Sheet Planning and reporting

    Hi All
    After entering planning data for liabilities in PCA, the data does not show in the interactive report for balance sheet accounts. But if you drill down the data is there. Does anyone know why the total does not appear in the summarised position before drilling down? This is specifically for Liabilities.

    Hi Murali
    I checked the Totals Records and Line Items using tx code KEE0. The system reports that they are in sync. I then used a different planning layout to enter the data and it is now populating the report at summary level. I checked the initial layout I used. It was a custom-made layout copied from a standard one and amended to allow the users to enter the data per period. The lead column is the account number which has the hierarchy and variable parameters set to on. The other columns are the individual periods from 1 to 12. It is also used to upload planning data from Excel. What could be wrong with the planning layout?

  • BALANCE SHEET WITH UNASSIGNED NODES

    First of all hello everybody,
    In spite of being involved with balance sheet and P&L query I´m facing a problem never had before. We´re using the virtual infocube 0FIGL_V10 and its own query provided by Business Content.
    Up to yesterday everything worked fine and showed up balance sheet and its nodes properly according to report in ECC. FI consultants decided to make changes in Balance Structure and turned on both credit and debit indicators in a couple of nodes. From then on relationed accounts did not appear within balance sheet but below unassigned nodes, obviously it should work properly once updated data by means of signs and so on. I removed content and reload 0GLACCEXT (its hierarchy), 0GL_ACCOUNT and infocube 0FIGL_C10 and kept failing.
    Even i checked if function module supported by 0FIGL_V10 was modified and not at all.
    Does anyone know what´s wrong? Is a problem of ECC customizing (don´t think so but...)? Am i missing any step?
    Any suggestion would be appreciated...
    Thanks in advace.

    Thanks for your replies!
    Simon you were right. By checking up 0BAL_DEPEND I found out that someone had disabled certain mapped fields in transfer rules...one of them was PLUMI -> 0BAL_DEPEND.
    I found an article about an balance sheet sample with this field but i didn´t pay attention to.
    I shall activate transfer rules and so on from BC again and hope solving it.
    Thanks again.

  • Moving Net Income to Balance Sheet with Business Rule

    Hello,
    The system is BPC 7.0 SP3, on SQL 2008
    I was wondering if anyone else has had this issue.  I created a business rule that moves Net Income Year to Date to the Balance Sheet, and call it through logic.  
    The problem I am having is that all periods are calculating correctly except for Period 12.  The same number that is calculate for Period 11 is posted to Period 12. 
    The Time Dimension looks correct with it's prior and current and next properties.
    Here is the Business Rule setup, all entries you do not see are NULL
    Transformation Group        Source         Source DataSRC     Destination Account   Destination DataSRC                      
    CEYTD                                NetIncome     TOTALADJ             29210                          Input                                                                               
    Reverse Sign                      YTD        Remark          
    False                                    True        CEYTD
    Here is the logic I use to call the stored procedure.
    *RUN_STORED_PROCEDURE=SPRUNCALCACCOUNT([%App%], [Actual], [USD], [%SCOPETABLE%], [%LOGTABLE%], [CEYTD], [99])
    *COMMIT
    *RUN_STORED_PROCEDURE=SPRUNCALCACCOUNT([%App%], [Actual], [LC], [%SCOPETABLE%], [%LOGTABLE%], [CEYTD], [99])
    *COMMIT
    If anyone has experienced this issue before, I would really appreciate some help on how to resolve it.
    Thank you,
    Mark Glowczewski

    Hi
    why not try the script logic in doing this it will be much more flexible
    Thanks

  • Balance Sheet with BPS and hierarchie

    hello,
    We have to create a Balance sheet in which users can manually insert data.
    We have created a hierarchy and then a manual planning in BPS and all is ok, but we want to allow users to fill only the "leaf" element of the hierarchy and not the internal node...
    how can we proceed?
    A second question: "top-down" and "bottom-up" in "totaling logic" are not useful for us (it creates confusion in users...)... can we deactivate/bypass it?
    Thanks a lot

    I posted a resolution about three or so months back
    Basically create a new infobject of account with a compound of co code - and a nav atts of alternate coa and alternative gl account
    This is to reolve the m:n realtionship of account to local account (ie it is different per co code)
    Create a bespoke extractor of SKB1 or extend the current one - and then add the compound object to your cubes

  • P&L A/C and Balance sheet for segment reporting

    Hi
    I am using the ECC 6.00, segmental reporting functions
    I have one requirement is that
    Customer wants prepare the profit and loss account and balance sheet for each segments wise, 
    Please help me, How to prepare the segment wise profit and loss account and balance sheet
    Tarakesh

    Hi thanks for quick reply,
    segment is assigned in profit center masters, i prepare the account groups for profit center and setting like okb9 and 3keh.even though one segment have assigned to no of profit centers.when profit center and cost centers are hitted segment also hitting. based on the cost objects can i get the profit and loss account for segment?
    but my doubt is how the system know particular g l account have revenue account and expenses account relating to segment.
    we want to purly segement profit and loss account and balance sheet only to meet the AS-17
    thanks
    tarak

  • Balance sheet with 2 diff fiscal year variants

    Dear All,
    I am facing an issue. The Client is using Jan to Dec fiscal year but he also wants to get the balance sheet as per the indian fiscal year i.e April to March. Is there any way to do so?

    Hi,
    did you check the SAP notes
    152888 - Different fiscal year variants in FI-AA
    1493253 - Different fiscal year variants in FI-AA (II)?
    There are a restrictions for different fiscal year variants in asset accounting. This also applies to NewGL.
    Kind Regards,
    Steffen

  • Balance Sheet Report in SAP BW/BI

    Hi,
    I have been requested to create a Balance sheet report on FIGL Cube and I need your help as I don't have much functional knowledge in FI.
    I need your help to understand which GL accounts should we include in the balance sheet. I can see a hierarchy built on 0GL_account for balance sheet  but I have been told that I canot use the hierarchy as it is as we may need to include or exclude some GL accounts.
    I am confused as I dont know what need to be included or excluded. Will there be any list maintained in R/3 where they will have the list of GL accounts need to be used for balance sheet.
    I also need your help in reconciling the balance sheet with R/3. what is the approach to reconcile the whole balance sheet with R/3 and BW.
    Please provide your valuable information.
    Regards,
    Raghav

    HI,
    balance sheet is always combination of GL accounts. but you need the functional help for which GL accounts you can use in balcance sheet line items. ex: input material cost, utility cost these all are combination of GL accounts so functional guy will give you the list of GL accounts.
    easy way is creating the heirarchy, since you have the heirarchy copy it and do the changes as per your requirement finaly in your report you just have the heirarchy and key figures are credit and debit etc
    roconsilation alway with the combination of GL accounts. (take some GLA ccounts month wise or fiscal period wise and check in R3 and your BI data target)
    Regards,
    Chandra.

Maybe you are looking for