Batch Does not exist

Hi,
After releasing process order in goods recpt tab batch number is generated but if double click on that batch number msc3n screen is open and its gives me error. "Batch does not exist"

Hello Sakshi,
Batch will created only when the order is saved.So first save this order and check in Msc3n.
Regards,

Similar Messages

Batch does not exists for the material

Dear Gurus
In the inspection set up in qm view of material master I have assigned early lot creation in control inspection lot field.I have created MICS and inspection plan also.After release of process order for that material the inspection lot for that order is created.When I am saving the inspection lot after entering in qa32 the system is throwing a dialogue box ,"batch doesnot exist should a batch be created" with 3 buttons yes, no, cancel.Although the batch number is already present for the lot that I sawwhen I entered in,( batch number is coming through internal number range).Now after pressing yes in the dialogue box when I am going to msc2n to view the batch, the error message is coming the batch does not exist.
What are the settings that I need to do so that this discrepency does not arise.
Regards
Sandip Sarkar

sandip:
1) DO you assign a batch number to the product during order creation ??
2) Why do you have to enter with QA32 to save the inspection lot? This is saved once you release the order.

VL01N - Message VL200 -The batch does not exist in plant

Hi all,
I try to create a delivery for a sales order via VA03 by displaying the order, select Sales document and then Delivery from the menu bar. On the Dilvery overview screen, when I enter an invalid Batch number for the item, I receive a warming messge VL 200 (The batch does not exist in plant &) and I can save the delivery. My problem is I want to put a hard stop instead of a warning message so the delivery cannot be saved. Is there any solution for this or it is impossible to put a hard stop. I was thinking of config ... but I am not familiar with this. Please help!
Thank you very much in advance,
Chuong

Hi Seshu,
In include FV50PF0L, there is a logic to either display a Warning or Abend message, so i guess something can be set to do this. Please help, thansk!
      if v50agl-sammelgang = space and "46A BEY
      ( ( sy-dynnr ne gc_dyn_batchsplit and
          t185v-panel ne gc_panel_chsp ) or
        tvlk-vbtyp ca vbtyp_lire ) .
        perform message_handling in program (programmname)
                                           using cvbap-posnr
                                                 '200'
                                                 'W'
                                                 'VL'
                                                 lc_werks
                                                 space
                                                 space
                                                 space.
      elseif ( sy-dynnr eq gc_dyn_batchsplit or          "46A BEY
               t185v-panel eq gc_panel_chsp ).
       if sy-binpt = charx.                                  "v_n_481983
           message id 'VL' type 'A' number '200' with lc_werks.
       else.                                                 "^_n_481983
        perform message_handling in program (programmname)
                                              using cvbap-posnr
                                                    '200'
                                                    'E'
                                                    'VL'
                                                    lc_werks
                                                    space
                                                    space
                                                    space.
       endif.                                                  "n_481983

Entry point 'Test Batch' does not exist

Hi Forum
I am in the process of upgrading one of our testsystems from TestStand version 3.1 to version 4.1.
The system is started up by a Labview app which calls TS by a command line call (-runEntryPoint "Test Batch" "C:\..."). However, TS 4.1 doesn't recognize the "Test Batch" entry point (worked fine in 3.1), and I get an error box with the message "entry point 'Test Batch' does not exist". I have checked that the entry point exist in the sequence model file, and if I go to the "Execute" menu, I get the choice to run "Test Batch".
I am able to se the -run command, but then I, for some reason, don't get the entire sequence.
Any suggestions to what I am doing wrong? I am logged in to TS automatically with my windows login.
B.R.
Martin
Solved!
Go to Solution.

Hi,
There should be a document in \Conponents\NI\Models\... which should give you the basics for the various process models.
here is some other references that may help
http://zone.ni.com/devzone/cda/tut/p/id/7958
http://digital.ni.com/public.nsf/allkb/D9E7A0BDDDA2A87886256FD9007598D2
Check out some of the related links
http://zone.ni.com/devzone/cda/tut/p/id/3819
Regards
Ray Farmer
Message Edited by Ray Farmer on 09-24-2009 11:00 AM
Regards
Ray Farmer

Batch does not exist for mvt typ 411 K

Hi Experts,
While i am perform migo for mvt type 411 K,it shows Batch does not exist but i check in MMBE,the batch for this vendor consignment was exist with stock.
Any advice?
Thank you.

How did the batch go into your system? with an initial load program, or with a standard MIGO movement?

Batch does not exist for material

Dear Gurus
In the inspection set up in qm view of material master I have assigned early lot creation in control inspection lot field.I have created MICS and inspection plan also.After release of process order for that material the inspection lot for that order is created.When I am saving the inspection lot after entering in qa32 the system is throwing a dialogue box ,"batch doesnot exist should a batch be created" with 3 buttons yes, no, cancel.Although the batch number is already present for the lot that I sawwhen I entered in,( batch number is coming through internal number range).Now after pressing yes in the dialogue box when I am going to msc2n to view the batch, the error message is coming the batch does not exist.
What are the settings that I need to do so that this discrepency does not arise.
Regards
Sandip Sarkar

Was the batch number enterred in the process order? If you have an inspection lot with early lot creation, you should have the batch number assigned in the order. I suspect the system is having problems because of some conflict between the inspection lot, the process order and whatever internal batch number assignment process you might have.
FF

Start screen does not exist in batch input data

I'm using .NET Connector calling Rfc_Call_Transaction funtion throught a proxy, i stablished all the params as you can see in the code below, but i get the message cited in the subject 'Start screen does not exist in batch input data'.
What do you think is happening? or Where can i get the samples needed for perform this type of request?
        private BDCDATA FillBDCDATA(string Program,
                                    string Dynbegin,
                                    string Dynpro,
                                    string Fnam,
                                    string Fval)
            BDCDATA st_DATA = new BDCDATA();
            st_DATA.Program = Program;
            st_DATA.Dynbegin = Dynbegin;
            st_DATA.Dynpro = Dynpro;
            st_DATA.Fnam = Fnam;
            st_DATA.Fval = Fval;
            return st_DATA;
        private void button3_Click(object sender, System.EventArgs e)
            SAPProxy proxy = null;
            try
                proxy = new SAPProxy("ASHOST=" + txtHost.Text +
                    " SYSNR=" + txtSysnr.Text +
                    " CLIENT=" + txtMand.Text +
                    " LANG="   + txtLang.Text +
                    " USER="   + txtUser.Text +
                    " PASSWD=" + txtPass.Text);
            catch(Exception excpt)
                txtMsg.Text = excpt.Message;
            if (proxy == null)
                return;
            BDCDATATable tblBDCDATA = new BDCDATATable();
            MESSAGEINF infMessage = new MESSAGEINF();
            //BDCDATA st_DATA = new BDCDATA();
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BDC_OKCODE", "/00"));
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BPDY-BLDAT", "30.12.2004"));
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BPDY-VERSN", "0"));
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "FMPS-FIKRS", "ente"));
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BPDY-JAHR", "2005"));
            proxy.Rfc_Call_Transaction("FM9J","", out infMessage, ref tblBDCDATA);
            txtMsg.Text = infMessage.Msgtx;

Jose,
I imagine you are passing, for the Dynbegin parameter of the private method FillBDCDATA, invalid values.
Why don't you try this way:
tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "X", "0111", " "," "));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BDC_OKCODE", "/00"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BPDY-BLDAT", "30.12.2004"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BPDY-VERSN", "0"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "FMPS-FIKRS", "ente"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BPDY-JAHR", "2005"));
I hope I could help you.
Regards,
Daniel Carvalho

Item Conversion to GMD YIELD TYPE does not exist for the item/items in this Recipe/Batch.

Item Conversion to GMD YIELD TYPE does not exist for the item/items in this Recipe/Batch. Cannot
scale/create batch.
While auto shipping the above error i am getting. Please somebody help on this.
Thanks.

Hi,
Could you please let us know which Oracle Product was installed and it complete 5 digit version.
Regards,
Prakash.

Bursting Problem - A file or directory in the path name does not exist

I'm trying to burst some data via email using the standard DocumentProcessor java code but receiving an error relating, I assume, to an invalid temporary directory. I've checked that the directory exists, as do the data file and control file. By the way I am not running in Apps, just stand alone mode. Any ideas would be much appreciated.
[042308_104249440][oracle.apps.xdo.batch.bursting.FileHandler][EXCEPTION] java.io.FileNotFoundException: /u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp (A file or directory in the path name does not exist.)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:205)
at java.io.FileOutputStream.<init>(FileOutputStream.java:96)
at oracle.apps.xdo.template.RTFProcessor.setOutput(Unknown Source)
at oracle.apps.xdo.batch.bursting.FileHandler.rtf2xsl(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.getXSLFile(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.processTemplate(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessCoreDocument.processLayout(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.globalDataEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingConfigParser(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.batch.DocumentProcessor.process(Unknown Source)
at PIreportburst.bEngine(PIreportburst.java:24)
at PIreportburst.main(PIreportburst.java:51)
-Below is the java code I'm using
public void bEngine(String ctrlFile, String dataFile, String tmpDir) {
try {
DocumentProcessor dp = new DocumentProcessor(ctrlFile,dataFile,tmpDir);
dp.process();
catch (Exception e) {
System.out.println(e);
}

Thanks Ike
Where do you suggest setting the temp directory:
DocumentProcessor("control.xml","data.xml","/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp")
or in the xdo.cfg:
<property name="system-temp-dir">/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp</property>
..and thanks for the link to the BIPublisherIDE
Cheers, Mike

The contained field name "ADTAGR" does not exist in any of the database tab

hı all
how can l solved thıs problem
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "PUT_QMFECAT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"ADTAGR" does not exist in any of the database tables from the FROM clause.
Information on where terminated
    Termination occurred in the ABAP program "SAPDBZQNQ" - in "PUT_QMFECAT".
    The main program was "ZQMR_BILDIRIM ".
    In the source code you have the termination point in line 732
    of the (Include) program "SAPDBZQNQ".
Error occurred during batch input processing
    The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
     occurred in
    procedure "PUT_QMFECAT" "(FORM)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPDBZQNQ "; its source code begins in line
    715 of the (Include program "SAPDBZQNQ ".
FORM put_qmfecat.
DATA: l_tab_fields TYPE rsfs_tab_fields.
DATA: l_ds_clauses TYPE rsds_where.
Dynamische Feldselektion
MOVE 'QMFECAT_C' TO l_tab_fields-tablename.
READ TABLE select_fields WITH KEY l_tab_fields-tablename
                                INTO l_tab_fields.
IF sy-subrc <> c_rc00.
    CLEAR l_tab_fields.
ENDIF.
Dynamische Selektionskriterien
MOVE 'QMFECAT' TO l_ds_clauses-tablename.
READ TABLE dyn_sel-clauses WITH KEY l_ds_clauses-tablename
                             INTO l_ds_clauses.
DB-Zugriff
>>>>> SELECT (l_tab_fields-fields) FROM qmfe
INTO CORRESPONDING FIELDS OF TABLE qmfecat_tab
   WHERE qmnum = rqmqmel-qmnum
   AND kzloesch = space
   AND (l_ds_clauses-where_tab)
   ORDER BY PRIMARY KEY.
regard sinan
Edited by: eyup_sinan on Jan 6, 2012 3:21 PM
Edited by: eyup_sinan on Jan 6, 2012 3:30 PM

You seem to have made a copy of the standard program. You'll have to make sure that you are handling this field correctly in your code.
Rob

Field KNVV-CHSPL does not exist in field status tables (TMOD*)

Hi Gurus,
Wile creating Customer master record at Tc= XD01 the following error coming as
"Field KNVV-CHSPL does not exist in field status tables (TMOD*)"
Plz help me its urgent.
Vinay

Hi
KNVV is the customer sales data table and CHSPL is the field name called Batch Split Allowed
My advice is to deselect the field name from the table and test it by creating it once again ...
Bobbili

Error logs in job releases forecast from DP to SNP-"Matl does not exist"

Hi Everyone,
I am facing error logs in the batch job which releases forecast from DP to SNP
Forecast release job - Weekly - Through background job
Forecast category - FA
Error 1: - Characteristic combination appears on batch job log with an error that
"GMC does not exist " Even though it exist in R/3 and APO
All products with error message "Product does not exist" from do exist and have Forecast in Product View
Error 2: - Deleted KCC keep showing up on the Demand Forecast release job log as errors even though they are invalid KCC and were deleted previously. How do they get removed from error log so they don't get created again
Material does not exist on the APO Product Master, in R3 there is a delete flag and the MRP type is set to X1 ,it does not exist in the APO Product Master and does not exist in R3.
Request you to kindly provide any way forward which may be causing error logs of the job
Thanks in advance,
Mrigendra Sharma

Hi Mrigendra,
Please re-initialize the SNP planning area (program : /SAPAPO/TS_PAREA_INITIALIZE) and then check the consistency by executing the program: /SAPAPO/TS_LCM_CONS_CHECK. If you observe any inconsistency in the log/spool, then re-run the program: /SAPAPO/TS_LCM_CONS_CHECK to observe all green.
It is recommended to run the consistency program after any master data change. The initialization program should be run at least weekly.
Try transfering the data again from DP to SNP to see if the error reappear.
Hope this helps.
Regards,
Nawanit

OTEXBAS add on installation error: table ZAUTHCUST does not exist

HI,
i am installing an add on OTEXBAS. The installation terminated returning the error--- ZAUTHCUST does not exist.
kindly suggest how to resolve this issue.
the import log is below:
ABAP Dictionary: Activation
Transport request   : SAPK-301COINOTEXBAS
System              : SPS
tp path             : tp
Version and release: 376.03.74 701
Program start============================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
User.....................: DDIC
Date, time...............: 24.03.2014, 13:32:52
Platform.................: CUSTOMER-SPS(701)/MSSQL/WindowsNT/mb4ba1025vs
Tool.....................: BATCH/RADMASG0
Log......................: F, \\mb4ba1025vs\sapmnt\trans\tmp\SAPA-301COINOTEXBAS
Program parameters:
Input Medium...............: Transp. Request SAPK-301COINOTEXBAS
Activation Method..........: Inactv.
Chk Mode...................: T
Version to be activated....: M
Versions to be deleted.....: All versions are deleted
Lock Against Paral. Exec...: Shared
Independent Statistics Log.: being written
Parallel Mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
*** Activate objects at level 2
*** Activate objects at level 3
*** Activate objects at level 4
Table ZAUTHCUST does not exist
*** Activate objects at level 5
*** Activate objects at level 6
*** Activate objects at level 7
*** Activate objects at level 8
*** Activate objects at level 9
*** Activate objects at level 10
*** Activate objects at level 11
*** Activate objects at level 12
*** Activate objects at level 13
*** Activate objects at level 14
*** Activate objects at level 15
*** Activate objects at level 16
*** Activate objects at level 17
*** Activate objects at level 18
*** Activate objects at level 19
        Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
        Final log
Following objects not activated/deleted or activated/deleted w. warning:
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
Table ZAUTHCUST could not be activated
        Final log
End phase 002 ***********************************************************
Start phase 003 **********************************************************
        Statistics on Activated and Deleted Objects
Number of objects to be activated............: 2276
Objects not activated........................: 1
Activated objects with errors in dependencies: 1
Objects activated with warning...............: 1715
Successfully activated objects...............: 559
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
        Statistics on Activated and Deleted Objects
End phase 003 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
Return code..............: 8
Phase 001..................: 00:00:41 (Object Activation)
Phase 002..................: 00:00:01 (Final log)
Phase 003..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:00:46
Date, time...............: 24.03.2014, 13:33:38
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20140324133339
Ended with return code: ===> 8 <===

Mamta:
I am not sure why you post these in the SAP for Utilities space. this is for the Utilities industry. I will move this one to ILM.
regards,
bill.

Add on OTEXBAS installation error: table zauthcust does not exist

HI,
i am installing an add on OTEXBAS. The installation terminated returning the error--- ZAUTHCUST does not exist.
kindly suggest how to resolve this issue.
the import log is below:
ABAP Dictionary: Activation
Transport request   : SAPK-301COINOTEXBAS
System              : SPS
tp path             : tp
Version and release: 376.03.74 701
Program start============================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
User.....................: DDIC
Date, time...............: 24.03.2014, 13:32:52
Platform.................: CUSTOMER-SPS(701)/MSSQL/WindowsNT/mb4ba1025vs
Tool.....................: BATCH/RADMASG0
Log......................: F, \\mb4ba1025vs\sapmnt\trans\tmp\SAPA-301COINOTEXBAS
Program parameters:
Input Medium...............: Transp. Request SAPK-301COINOTEXBAS
Activation Method..........: Inactv.
Chk Mode...................: T
Version to be activated....: M
Versions to be deleted.....: All versions are deleted
Lock Against Paral. Exec...: Shared
Independent Statistics Log.: being written
Parallel Mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
*** Activate objects at level 2
*** Activate objects at level 3
*** Activate objects at level 4
Table ZAUTHCUST does not exist
*** Activate objects at level 5
*** Activate objects at level 6
*** Activate objects at level 7
*** Activate objects at level 8
*** Activate objects at level 9
*** Activate objects at level 10
*** Activate objects at level 11
*** Activate objects at level 12
*** Activate objects at level 13
*** Activate objects at level 14
*** Activate objects at level 15
*** Activate objects at level 16
*** Activate objects at level 17
*** Activate objects at level 18
*** Activate objects at level 19
        Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
        Final log
Following objects not activated/deleted or activated/deleted w. warning:
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
Table ZAUTHCUST could not be activated
        Final log
End phase 002 ***********************************************************
Start phase 003 **********************************************************
        Statistics on Activated and Deleted Objects
Number of objects to be activated............: 2276
Objects not activated........................: 1
Activated objects with errors in dependencies: 1
Objects activated with warning...............: 1715
Successfully activated objects...............: 559
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
        Statistics on Activated and Deleted Objects
End phase 003 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
Return code..............: 8
Phase 001..................: 00:00:41 (Object Activation)
Phase 002..................: 00:00:01 (Final log)
Phase 003..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:00:46
Date, time...............: 24.03.2014, 13:33:38
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20140324133339
Ended with return code: ===> 8 <===

Hi Mamta,
Refer to Troubleshooting section of below SAP note
1143352 - SAP Archiving/Document Access by Open Text Installation
Hope this helps.
Regards,
Deepak Kori

QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao Bu

Hi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
    401462 - Error M7001: 'Please check table &...'
    201833 - M7001: 'Please check table XEKPO: Entry & &...'
    2072019 - Error M7001 raised during posting goods receipt
    407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
    439945 - GR w/ freight costs for stock transport ordr w/ML currencies
    521090 - FAQ: Stock transfer to stock transport order
    867878 - Inconsistencies in the EKBE table because of conversions
    214814 - M7001/M7361: Table T156M, entry MAA7 2
    1584493 - Overdelivery check for GR blocked stock with GR-based IV
    102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit

Batch Does not exist

Similar Messages

Maybe you are looking for