PRD and DEV server on different physical locations

Hi
We are in a situation which we planned to host our production and development servers at different geographical locations. Both locations have high speed internet and static IPs.
Kindly advice me how to configure transport management in this scenario.
Our config is ECC6.0 - DB6-WIN2008.
Regards
naveen

Hello Muthu,
Are these boxes on the same network ?? check by creating a RFC from your DEV to the PRD and test if its successfull.
If the RFC test is successfull then you can proceed with the TMS configuration. It wil not be any problem.
Best Regards
Niraj

Similar Messages

  • How to Setup a JSP to Run on Different Physical Location than OC4J Defaul

    I am trying to setup a development environment for jsp application development in Oracle 9ias Release 2 for a development group. I followed the steps outlined in NOTe:167960.1 using both EM Website (creating a OC4J and editing server.xml and defau*.xml files) and DCMCTL (Doc ID: 185635.1) utility. OC4J app is coming up only partially which does not work.
    Is this possible to "Setup a JSP to Run on Different Physical Location than OC4J Default Home" in Oracle 9ias Release 2 ?
    Appreciate insight
    Thanks
    Subu

    I was finally able to get it up and running... I commented out all the apple specific lines in smb.conf until I was able to successfully finish the driver copy process via the Windows driver wizard. The line in the /etc/smb.conf which was causing this weird problem was:
         vfs objects = notify_kqueue,darwinacl,darwin_streams
    I have no idea what this line is about. However after commenting it out the driver installation immediately started to work. I cross checked it by adding the line again and viola the problem was back - so it can be broken down to this line...
    As I've found some other comments to this line in the internet I guess I will go for the smb.conf changes described in this article:
    http://blog.djmnet.org/2009/02/09/macs-needing-unix-network-geekery/
    Cheers
    jogi4mac

  • Validate wIPS alerts if your wireless devices are spread in different physical locations(buildings, cities, states, countries)?

    This is a generic question... how do u validate wIPS alerts if your wireless devices are spread in different physical locations(buildings, cities, states, countries)?
    For ex:
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;}
    “DoS: Queensland University of Technology Exploit” and “DoS: RF jamming" alerts.

  • Development and Quality server using different screen color setting

    Hi,
    I want to differentiate the Development and Quality server using different screen colors,
    How can I set different color logon screen for the different kinds of servers.
    Thank You.
    Best Regards,
    M.Thirumoorthi
    [email protected]

    Hi Thiru moothi,
    Please check these links :
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/modifyingtheLogon+Page&
    Custom Password Change Page
    Custom Portal Logon Page
    Reward points if handy!
    Cheers,
    Sandeep
    Edited by: Sandeep Tudumu on Mar 26, 2008 7:41 PM

  • To revert back a transport request from prd to dev server

    hi experts
        how to revert back a transport request from prd server to
        dev server?
        a transport request has been wrongly transported
        and it has make major changes in production server,
       now  we want to revert back that request , we know the   request no.
    regards
    pankaj

    All you have to do is create an order of transport type "Transport of copies" in PRO.
    I give you the steps to follow:
    1. Go to SE01 and create a new order (remember the type "Transport of copies").
    2. Enter the data of the order of transport that is going to come back.
    3. Enter the target, here is where you asign the target system to carry the request.
    4. Now just add the number of request to the new request you just created.
    5. Finally released the request from this transaction.
    6. Check on the queue of transport in DES, the request must appear there.
    I hope you serve =)

  • Database restore of Content and Cache Server on different SID

    Hi Experts,
    I am trying to do backup \ restore method, is it the correct way to do.
    if not, please suggest me the correct methodology.
    if yes, please let me know the procedure to restore the database on different SID
    Content Server and cache server was installed on MaxDB 7.6 and build 18
    Regards,
    Sandeep

    >
    $@ndy wrote:
    > I am trying to do backup \ restore method, is it the correct way to do.
    Ok... is this supposed to be a question?
    Maybe reading the documenation would also help you in this case?
    Did you try?
    > if not, please suggest me the correct methodology.
    So it was indeed a question - but how do you expect us to answer it?
    Because you didn't really gave us any alternative to decide on here...
    > Content Server and cache server was installed on MaxDB 7.6 and build 18
    Are you guys getting any prizes for using the oldest software you can digg up in the service marketplace?
    If there  is anything I can recommend at this early stage of your question:
    Upgrade the database to a recent release, read the documentation/sap notes/WIKI/training content for MaxDB.
    regards and a sucessfull new year,
    Lars

  • Essbase Server and Deployment Server on different boxes

    Hi,We're currently testing Hyperion Essbase 7.1.2 and we were wondering if it was possible to have the Essbase (Analytic) Server on one machine and Deployment Server on a different one. At first sight, it seemed so, so we did just that.Now, we'd like to test our setup by signing on through the ESS command line prompt (on the Deployment Server machine) but seem to miss something since the connection ("signon") is refused. The funny thing is that on the machine on which the Essbase Server is installed, we've also installed the Administration Services: through the Administration Console, we can indeed connect to the Deployment Server and interact with it.So my first question is: is our setup possible (that is, having the Deployment and Essbase servers on distinct boxes)?If so, what is the meaning of all the parameters needed for the "signon" command of the ESS command line prompt?Any guidance would be greatly appreciated.Thanks,A. Lepage

    Yes, you can configure it that way and we have many customers with that setup.You have to login to the EDS console the first time using the 'default' admin username/password (system/password) and setup a username, with admin privileges, that also is on your Essbase server. Logout, then login with the 'real' username. Select the domain object ('essbase at the top of the tree'), right mouse click and add an analytic server. Type in the name of your Essbase server and it should be added (and you should be able to browse objects on the Essbase server). Finally, select the server, right mouse click and 'sync security'.Tim TowApplied OLAP, Inc

  • Deployment Server and Essbase Server on different boxes

    Hi,We're currently testing Hyperion Essbase 7.1.2 and we were wondering if it was possible to have the Essbase (Analytic) Server on one machine and Deployment Server on a different one. At first sight, it seemed so, so we did just that.Now, we'd like to test our setup by signing on through the ESS command line prompt (on the Deployment Server machine) but seem to miss something since the connection ("signon") is refused. The funny thing is that on the machine on which the Essbase Server is installed, we've also installed the Administration Services: through the Administration Console, we can indeed connect to the Deployment Server and interact with it.So my first question is: is our setup possible (that is, having the Deployment and Essbase servers on distinct boxes)?If so, what is the meaning of all the parameters needed for the "signon" command of the ESS command line prompt?Any guidance would be greatly appreciated.Thanks,A. Lepage

    I am running Essbase on one Windows server and EAS, EDS, ESS, and EIS on another. Did you create the Analytic Server in EDS and then Sync Security?

  • BI Schedule and Presenation Server on Different Servers Configuration

    I'm having a problem getting my iBots to run and deliver the information to the catalog with the following configuration:
    2 Presentation Servers on Windows with IIS for NTLM authentication (via a Load Balancer)
    OBIEE Server and Scheduler, and Presenation Server on Solaris (the Presentation Server on Solaris will be turned off)
    The catalog between the 2 Windows Servers are are shared. When I create an iBot on the Windows the request is sent to the Scheduler on Solaris and errors out with the following message:
    [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Path not found (
    /shared/_ibots/Test Email from UAT)^M
    Error Codes: U9KP7Q94^M
    My question is why does the scheduler send the alert to the Presentation Server on the Solaris box and not the shared Presentation Server with the shared catalog on the Windows Servers. Am I missing something in the configuration?
    Thanks,
    Chuck

    I figured it out. I had to re-run the schconfig utility on UNIX and reconfigured the server from localhost:9710 to the actual server name.

  • MOBI with BOE and mobile server on different servers

    Hi Experts,
    We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
    In such a configuration, how does the two servers communicate?
    What should be the VAS and VMS server configurations? especially the external hostnames in the files?
    We are looking for a non Blackberry(proxy) deployment.
    We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
    Any help would be highly appreciated.

    I figured it out. I had to re-run the schconfig utility on UNIX and reconfigured the server from localhost:9710 to the actual server name.

  • Prd and DR server installation

    Dear All,
    I have installed OBIEE 10.1.3.4 in Prodsystem1(oc4j4 and BI server and Presentation server)
    BI installation Path-->Shared network path e.g "SharedOracleBI"
    Data Installation Path-->Shared network path e.g "SharedOracleBIData"
    When Prodsystem1 failed we should start automatically DRsystem2.
    How will do this?
    DRsystem2 also need to install oc4j and BI server and Presentation server?
    If yes What BI server path can give?
    What BI Data path can i give?
    How oc4j work ? Is it 9704 port?
    Database available in single ip for Prodsystem1 and DRsystem1.
    Could you please explain me.
    Thank
    Govind R

    I have 2 production server like below
    Prod1: Installation path OracleBI and OracleBIData (both folder mounted in SAN)
    DR1: Installation path OracleBI and OracleBIData (both folder mountes in SAN, what we are pointed Prod1)
    My question is
    1. We need to install 2 machines seperatly (Prod1 and DR1) or ?
    2. If yes How will give installation path while OBIEE istallal DR1 machine.
    Note: My aim is when Prod1 goes down then start automatically DR1 machine,but .rpd and catalog should be one place.
    Thanks

  • Different SAPlogon screen for prd and dev systems

    Hi!
    I would like to distinguish the SAPlogon screen for production and development systems.
    For example:i logged into to the SAP system by SAPlogon and i want to see in the right top corner of the screen the letter P or D, etc.
    Could you advise me how to do it?
    Thank you!
    Dan

    I think this can be done but little difficult.
    After installing your sapgui, you have to change the picture in the right corner which you can find inside the folder programfiles-sap-sapgui and can search in the picture. If you replace the picture with your picture, you can find it there. But i dont think it can be done seperately for dev, qual and prod systems.
    With Regards,

  • Migrating Exchange 2007 to Exchange 2010 at a different physical location - Suggestions??

    Hello! I have a domain in Canada that is running Exchange 2007. My company wants to consolidate this Exchange and migrate the mail to the USA based Exchange 2010 in NYC. Not only is it migrating from 2007 to 2010, it's also moving locations physically. 
    Does anyone have any thoughts on how to best approach such a situation?

    ok... in addition to sarvesh comments i would also add a checklist based approach .. please follow below link
    http://blogs.technet.com/b/mspfe/archive/2014/03/20/checklist-upgrading-to-exchange-2010-from-exchange-2007.aspx  this would help you not to miss anything in terms to critical or non-critical aspects.
    after checklist i would suggest you give a shot at exchange server deployment assistant which will help you putting your scenario and suggesting the best practices. http://technet.microsoft.com/en-us/office/dn756393.aspx
    this guide for planning of migrations also shows the full scenario step by step : http://exchangeserverpro.com/wp-content/uploads/Exchange%20Server%202007%20to%202010%20Migration%20Guide%20V1.0%20-%20Planning%20Chapter.pdf
    this is also a step by step graphical representation for the process. THIRD PARTY LINK though.. http://www.petenetlive.com/KB/Article/0000236.htm
    Let me know if this helps.
    MARK AS USEFUL/ANSWER IF IT DID
    Thanks
    Happiness Always
    Jatin

  • PXE boot issue with DHCP and SCCM server on different subnets

    I'm working with a client on the operating system deployment module of SCCM.
    Their network configuration currently has a single large subnet for client
    computers with a DHCP server on the same subnet. The SCCM subnet is
    configured on a seperate subnet with no DHCP server on the subnet. We want to
    configure client computers to be able to boot using the PXE client to deploy
    OS images to the machines but can not get PXE-boot to work correctly.
    Also, the client does not want to make changes to their network
    infrastructure routers or switches to remedy this problem. Are there settings
    on the DHCP or SCCM servers we can implement to make this work? If so, what
    needs to be installed or configured on each server. We currently already have
    WDS installed on the SCCM server and the SCCM server is configured as a PXE
    Service Point within SCCM. Both WDS and the PXE Service Point seem to be working fine.
    Any help would be appreciated.
    Thanks,
    Gary

    I am Brazilian,
    sorry for wrong english
    My DHCP is on linux,
    in my own structure VLANS
    The system center is on the network
    10.0.4.0/24
    The machines on the network 10.0.5.0/24
    The problem is that the machines that
    are not on the same network system center
    can not boot
      I tried configuring / etc/dhcp3/dhcpd.conf
    follows
    option vendor-class-identifier "PXEClient";
    option bootfile-name "\
    \ SMSBOOT \ \ x86 \
    \ wdsnbp.com";
    option tftp-server-name
    "10.0.4.101"; ---->
    IP server
    But it did not work, anyone know
    how to configure?

  • Dev 6.0 and Dev server 2.1

    Hi, everyone:
    I have got a Developer 6.0 for Windows NT. My database server
    (Oracle 8.0.5) is installed on Intell Solaris. I also got the
    Developer/2000 server for Intel Solaris release 2.1. My question
    is: can I install the Developer/2000 server in the same box with
    my database server, then connect it with my Developer 6.0 and
    the database server? Will this work? Do you have any suggestions
    for setting up this structure?
    Thank you in advance for the help.
    Marry
    null

    Marry,
    We have everything (databse, developer server, applications
    server) set up on the same machine (Sun Solaris) and it seems to
    work.
    Noel
    Marry Jin (guest) wrote:
    : Hi, everyone:
    : I have got a Developer 6.0 for Windows NT. My database server
    : (Oracle 8.0.5) is installed on Intell Solaris. I also got the
    : Developer/2000 server for Intel Solaris release 2.1. My
    question
    : is: can I install the Developer/2000 server in the same box
    with
    : my database server, then connect it with my Developer 6.0 and
    : the database server? Will this work? Do you have any
    suggestions
    : for setting up this structure?
    : Thank you in advance for the help.
    : Marry
    null

Maybe you are looking for