Bigger resolution then screen
Sometimes when I log in, the resolution too big. If i go to System > settings > monitor, the screen flashing, and set the good (1280*800) size.
Before tfis metfot, my desktop looks like this:
in my xorg.conf:
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
But i tried to delete it, not sovlad. I tried the old gdm, isnt solved (an othet problem with the new gdm, sometimes it isnt appear. When i change to tty1 and back, it apperas)
can someone help me?
thx
Last edited by barii (2010-05-08 16:44:46)
without xorg.conf:
[quote=n0dix]Post your Xorg.0.log.[/quote]
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux arch-notebook 2.6.33-ARCH #1 SMP PREEMPT Mon Apr 26 20:00:20 CEST 2010 i686
Kernel command line: root=/dev/sda8 ro noapic
Build Date: 01 April 2010 05:35:33PM
Current version of pixman: 0.18.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 8 18:29:18 2010
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 8
(--) PCI:*(0:0:2:0) 8086:2a42:1028:0263 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000efe8/8
(--) PCI: (0:0:2:1) 8086:2a43:1028:0263 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6b00000/1048576
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.4.901, module version = 2.10.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output HDMI2 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): Output DP3 has no monitor section
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output HDMI2 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Output DP3 disconnected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): [XvMC] xvmc_vld driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Dell WMI hotkeys
(**) Dell WMI hotkeys: always reports core events
(**) Dell WMI hotkeys: Device: "/dev/input/event17"
(II) Dell WMI hotkeys: Found keys
(II) Dell WMI hotkeys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AlpsPS/2 ALPS DualPoint TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event16"
(II) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
(II) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
(II) AlpsPS/2 ALPS DualPoint TouchPad: finger width range 0 - 0
(II) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 0
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(II) config/hal: Adding input device DualPoint Stick
(**) DualPoint Stick: always reports core events
(**) DualPoint Stick: Device: "/dev/input/event15"
(II) DualPoint Stick: Found 3 mouse buttons
(II) DualPoint Stick: Found relative axes
(II) DualPoint Stick: Found x and y relative axes
(II) DualPoint Stick: Configuring as mouse
(**) DualPoint Stick: YAxisMapping: buttons 4 and 5
(**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
(**) DualPoint Stick: (accel) keeping acceleration scheme 1
(**) DualPoint Stick: (accel) acceleration profile 0
(II) DualPoint Stick: initialized for relative axes.
(II) config/hal: Adding input device HID 413c:8158
(**) HID 413c:8158: always reports core events
(**) HID 413c:8158: Device: "/dev/input/event10"
(II) HID 413c:8158: Found 3 mouse buttons
(II) HID 413c:8158: Found relative axes
(II) HID 413c:8158: Found x and y relative axes
(II) HID 413c:8158: Configuring as mouse
(**) HID 413c:8158: YAxisMapping: buttons 4 and 5
(**) HID 413c:8158: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 413c:8158" (type: MOUSE)
(**) HID 413c:8158: (accel) keeping acceleration scheme 1
(**) HID 413c:8158: (accel) acceleration profile 0
(II) HID 413c:8158: initialized for relative axes.
(II) config/hal: Adding input device HID 413c:8157
(**) HID 413c:8157: always reports core events
(**) HID 413c:8157: Device: "/dev/input/event9"
(II) HID 413c:8157: Found keys
(II) HID 413c:8157: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 413c:8157" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event8"
(II) Logitech USB Receiver: Found 1 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found relative axes
(II) Logitech USB Receiver: Found absolute axes
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(EE) Logitech USB Receiver: failed to initialize for relative axes.
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) acceleration profile 0
(II) Logitech USB Receiver: initialized for absolute axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event7"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found relative axes
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): Allocate new frame buffer 2128x800 stride 2176
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): Allocate new frame buffer 2128x800 stride 2176
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): Allocate new frame buffer 2128x800 stride 2176
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 74.76 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (50.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 49.84 1280 1296 1344 1494 800 801 804 834 +hsync -vsync (33.4 kHz)
Last edited by barii (2010-05-08 23:42:57)
Similar Messages
-
How do i get the screen for pages and numbers to become bigger on my screen
How do I get the Screen for pages, numbers and quickbooks to become bigger on my screen.
The Font is fine for pringingMac's don't have UI scale options like Windows has.
Either you can drop the screen resolution in Displays a wee bit and make things appear distorted, or do what I do and use the Universal Access and set a control key, then use a mouse wheel/scroll to zoom in and out where the mouse is pointed.
For easier web surfing I've got a good solution here
Better surfing options for hard of seeing users -
N-Series NEEDS a high-resolution touch-screen!
Dear Nokis,
If you only do one good thing in 2008 please let it be an N-Series S60v3 phone with the following specifications:
*Larger, higher resolution touch-screen.
*Alloy casing, not all plastic.
*5MP camera with Xenon flash.
*640*480 30fps video recording.
*Integrated GPS.
Hell, basically all I want is a phone which has all the features of the N82 but with the larger, higher resolution touch-screen. I use my N82 for internet when I am out of the office and even with Opera Mini browsing is a complete pain in the **bleep**. A touchscreen would help with browsing so much it would completely change the way we use the phones, and a higher resolution would make it so much more practical.
If you need to make the phone bigger then so be it, just PLEASE give us a higher res touchscreen!
*begs*16-Jan-2008 11:21 AM
psychomania wrote:
A nokia touch screen is in development and we should see one this year.
No specs or firm info is available to the public yet.
Keep your eyes on popular phone news sites for the latest info.
I do keep my eyes on the news sites and saw that one had been demo'd, its just I fear that the models that will eventually be released wont be as fully featured as I specified in my original post! -
Having a bigger resolution than the native one?
Hi,
I own a Samsung NC10 netbook and on a conference a met a guy who own this, too . This poor guy uses Windows on his machine, but I have to admit that he used a feature that I find quite useful: When he connected his netbook to a projector and cloned the output, the resolution of the projector (1024*786 i guess) was higher than the one of the netbook (1024*600). What happened on his windows machine was that he could scroll to the bottom of the screen to see the missing 186 pixels that where shown in the silver screen but cut off on his LVCD.
When I (with Arch) use the NC10 on a projector I can only see the additional 186 pixels on the silver screen and I have no access to the bottom of the LVCD (what can be difficult when the silver screen is behind you ).
So, is it possible, to have this feature in Linux/Arch, too? To use a bigger resolution on the LVCD and "scroll" to the missing parts by moving the mouse to the edges of the screen?
I hope I explained this clearly - otherwise ask for more/other informations
Thanks!
barghestYes ,if you run
xrandr --fb 1024x768 --output LVDS1 --panning 1024x768 --output VGA1 --mode 1024x768 --pos 0x0
(LVDS1=the notebook's screen, VGA1=the beamer) you can scroll the internal panel up and down by moving the cursor to either edge while both outputs use 1024x768 and show the same thing. But this isn't really usable for presentations.
xrandr --output LVDS1 --scale 1x1.28 --output VGA1 --pos 0x0 --mode 1024x768
would stretch LVDS1 vertically to match the beamers resolution. But if you use KMS, --scale is currently broken, it just scales the background, nothing else. Example: Fedora Bug Report, the Arch version has the same problem.
Now, the modeline thingie:
You can calculate one using gtf x y R (x=horizontal width, y=vertical width, R=refresh rate). Running gtf 1024 600 60
results in
# 1024x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 48.96 MHz
Modeline "1024x600_60.00" 48.96 1024 1064 1168 1312 600 601 604 622 -HSync +Vsync
The quoted part is just the name to use in xrandr's --mode command, so i removed the _60.00 and included it in the monitor section of my xorg.conf among others (i.e. 640x480 is there so I can run Starcraft in fullscreen ):
Section "Monitor"
Identifier "LVDS1"
VendorName "ASUS"
ModelName "EeePC 1000H"
Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 -HSync +Vsync
Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622 -HSync +Vsync
Modeline "640x480" 23.86 640 656 720 800 480 481 484 497 -HSync +Vsync
EndSection
The X server adheres to these settings even if you're using KMS but I don't know if it does if you're using hotplugging because in this case these settings are intended to be generated automatically. I just use them because I don't want to use HAL. But trying to force a resolution bigger than the native one this way doesn't work for me. -
My ipod touch (1st gen) is frozen and does not respond. All I can see is the Apple logo for around 10 seconds and then screen returns to black. What is wrong?
Did you already try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore
-
PS CS6 on the mac pro: the bruch in hard and soft is the circle of the bruch bigger than then the effect. How can i bring it to normale?
Go to System Preferences>Accessibility>Display and the set the Cursor Size to Normal
-
Trouble with mobile site. Displays for a second then screen goes black.
Trouble with mobile site. Displays for a second then screen goes black. Using safari, 4s on Verizon. Example: m.mlb.com/lad/
I hadn't checked the site since January or so, when it worked. It might be related to the Opening Weekend skin they have on the site, but for me, it shows the top part of the page for 3 seconds while it's loading (scrolling down is impossible) and then all of a sudden it turns black, showing nothing. It's that way for every MLB mobile site.
At first:
Two seconds later:
I noticed this on 4/7/12. Does anyone NOT have this problem?
Matt -
After restore, Pavilion a6250t appears to start then screen goes black.
Have tried F11 restore as well as restore from DVD. In bothe cases, The system restarts after retsoring the Windows partition, attempts to start Vista then screen goes black, while the CPU appears to be processing the restore. Suggestions?
XFX Radeon HD 5770 = PC only card, compatibility is not a guarantee
You realize there is EFI type firmware that makes a Mac a Mac? and PC even with "UEFI" don't require or use graphic cards, hence Apple vs PC
you know by going to Apple Store or a vendor like OWC or that says "Mac Pro" Compatible - you can find Apple hardware on Amazon for instance.
Or you buy from a vendor like MacVidCards that deals with GeForce cards (mostly if not exclusively) FOR Mac Pro.
And there are different options for 2008 vs older which is why it is important when you have lack of clarity and have one thread being thread-hijacked in two.
http://netkas.org
Has forum and more about 3rd party non-Apple AMD/Nvidia and support down the road or using off the shelf PC cards. -
None responsive ipod apple logo comes on then screen goes black
Ive not used ipod for a while .Now it wont charge apple logo comes on then screen goes black
After connecting to a charging source for hours try:
iOS: Not responding or does not turn on -
photos in my iPhoto library will not enlarge when double clicked on. they fill the screen for a second (or less) and then screen goes black. hasn't happened before. thanks--
There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
i have a 4rd generation ipod touch and suddenly the image of desktop is bigger than the screen. i dont know how to solve this.
Double tap the screen with 3 fingers.
Stedman -
Rented film from Apple TV fully downloaded (eventually) press play now then screen goes to authorizing for 10 mins, then goes black blank, no film , repeated process 3 times, still no joy. first and last time I rent a film with Apple, how do I get my money back ? Thanks
First, that cannot be an iBook G4 as that machine cannot run Snow Leopard let alone Mountain Lion. To run Snow Leopard it has to be an Intel processor, not a G4. What does it show as the Model Identifier in About This Mac, More Info, System Report, Hardware, Model Identifier?
Second, if you have erased the hard drive there should not be remnants of any prior content. Even though Disk Warrior is saying nothing is wrong with the hard drive, it sounds as though there are problems. You may want to consider simply replacing the hard drive so there are no questions about faults. A good source is OWC, http://www.macsales.com where they also have on-line videos showing how to do the replacement.
Third, you could also try again to restart using the Snow Leopard DVD/CD and use Disk Utility on that install disk to erase again, and do it a couple times, then try to install. If it continues to refuse, then it sounds as though there is a fault with the hard drive. -
my macbook boots up, I get a screen picture then screen goes blank...I get the start up sound, then a picture, then the screen goes blank but computer is still on..does anyone know what the problem is...do I need a new battery or am i just screwed.
Hello nosaint1961,
It sounds like you are unable to successfully boot your computer to your desktop. I would use the troubleshooting from the following article to help troubleshoot what is happening named:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Nano 6th turns on for a few seconds then screen goes black and nothing. what is wrong with it....
My 6th gen nano turns on for a few seconds, then screen goes black and nano goes off. what is wrong with it? can any one help me out? do I need new battery? do I need a full repair? or is there something I can do myself to fix it. Thanks for your help.
At the moment I say as I've fixed, momentarily:
I made a downgrade to 1.0
The problem, gentlemen, is the upgrade from 1.1 and 1.2
It is a pity that I lost all the new features offered by the new firmware , just because Apple staff could not think to try this new update, on ipods with some airtime.
I hope Apple pull out a version 1.3 with the ability to choose the feature detection, and the user can disable it at will. -
GeForce FX 5600 - LAST NVIDIA driver Resolution of screen
Hi all,
I have recently bought BattleField Vietnam and this game requiers the last NVIDIA Driver. I have downloaded them here : http://www.nvidia.com
The game is OK but i have problems with my Resolution of screen... I can't choose a resolution between 1024*768 and 1280*1024... It is either one or the other but not between
MSI doesn't proposes the last nvidia driver
PLEASE HELP ME.How can that be I just checked my game And I have 1152x864 in the list. Are you sure that your monitor supports that resilution?
One thing you may try is Go and find a file called VideoDefault.con in your /mods/BfVietnam/settings Directory under Battlefield Vietnam open it with notepad and change this line renderer.allowAllRefreshRates 0 from 0 to 1 and save and close. This will now allow all refresh rates in the game.
The game came with the 56.56 drivers not the 56.64 drivers
Maybe you are looking for
-
Should I use a servlet? - please help
Hi, This is my problem: I have a class (say, DBClass) that connects to the database - it has general functions for insertion, updation, and deletion. I have some other classes that use the DBClass to perform insert, update, delete operations on diffe
-
im trying to download the new v40 or v50 but its saying no updates available can some one help me
-
Why do I hear a rattling sound in my iPhone 5 when I lightly shake it ?
Why does my iphone 5 make a rattling noise when I lightly shake it or move it ? It's a faint sound but it's brand new this should not happen?
-
JEditorPane loading HTML loses format
Hello all, my swing program requires a "help" popup which is basic html. It defaults to a center justified view when rendered. What is the easiest way to ensure left justified without changing the html document; as it renders left-justified on all br
-
I can't reinstall from the adobe site. I get an installation failed message. I can't use the version that I transferred from my old iMac. I am missing plug-ins. Something called JBX and LILO.Indesing.Plugin. I can't find any of these on the web or on