Billing documents: (Urgent! )

Hi Experts,
Please help me out how to do the following tasks in Billing documents..
1.How to find out the sum of price of all products(materials) sold in a period of time using all types of Billing plans? And also in case if the material/product being complex and the materials are only exploded in the delivery?
What r the tables to be refered?
2.How you can fetch the pricing condition information for an item in a delivery from e.g. the sales order?
Please get me some idea.
Thanks a lot in advance.

Hi,
first get the date wise all billing doc from VBRK and VBRP tables and take KNUMV o all documents from VBRK.
You can get the Pricing for all the materials based on different condiditons from KONV and KONP tables.
You have to pass VBRK-KNUMV(for billing documents) and
VBAK-KNUMV (for sales orders/deliveries) to KONV to get the pricing of all products by item.
Also pass Item if you wants to get itemwise.
Hope this helps.
Regards,
Anji
Message was edited by:
Anji Reddy Vangala

Similar Messages

Number Range-Billing document -Urgent

Dear SAP Guru,
Case1
When I create credit or debit note (first I create credit/debit request then Credit/debit note) with reference to existing billing documents I do not see any error & getting correct number range for credit/debit note.
Case 2
But when I try create the credit & debit note with refernece to existing billing document & modify the incoterm in credit/debit memo request & then, when I try to create debit/ credit note & save the document system is not generating correct number range for credit/debit note.
However the credit/debit note document type is same in both the cases 1 & 2
I am not able to understand when I am changing the Incoterm only, how this is effecting number range of document?
How I can rectify this issue? Please help me.
Points will be rewarded.
Thank you very much in advance.
Regards

Hello,
Just a thought: when you change the incoterms, maybe the system considers the docs in question as new CR/DR docs and hence assigning a different no. range? since I blv, the CR/DR have to be created with ref to the original invoice doc and changing incoterms might mean newly created documents? plz check..
Rgds,
Raghu.

Release to Accounting - Billing Document (Urgent pls)

Hi
Can anyone please let me know the program which can be used to shedule a job for releasing the Billing documents to Accounting.
I know the the Billing documents that are to be released to accounting. But we dont have access to release them to accounting through FCV3.
So we want to schedule a job for releasing to accounting.
Please do let me know ASAP.
regards
Krishna

I suggest you to use VFX3.

Problem with cancel billing document URGENT

Hello,
I have a problem. I have created cancel invoice but if you look at the document flow for tht cancel invoice it is showing completed and accounting document clreared. But client is asking that when ever we create cancel invoice this status should open and it sould not create accoutning document by default.
Please can any body help this.
Regards
sanakr

Dear Sankar,
When you do the cancelation of invoice the account document also will be updated I think that is the status is showing by the system.
Go through the accounting document which was updated or created while cancel the invoice based on these posting you can come to know those are correct or wrong postings.
If you are not able to check the account document entries then take FI people help.
I hope it will help you
Regards,
Murali.

Where Billing Document No is Stored -- Urgent

Hi All
I want to Upload Customer Line Items. I want to know where will the billing document gets stored as i want to clear it. Plz explain me in detail, as it would be of great help to me. Its a bit urgent
Regards
Rajaram

HI,
pls see the table vbrk ( field vbeln)
if it is useful pls assign the points
Thanks & Regards
phaneendra

Urgent !!! How to change Accounting document using Billing document numb

Hi experts,
I have one requirement where I have to modify the accounting document using report. User will enter billing document no and I have to find out respective accounting document and change header data of it.
I am very new to these modules so please give me solution.
Thanks
Sameer

Hi
Go to VF03- Display Billing document. From here you should be able to find the corresponding accounting document. Do note that there are only limited field such as text that is allowed to be changed once posted.
Rgds
Nadini

Urgent !!! How to change Accounting document using Billing document number

Hi experts,
I have one requirement where I have to modify the accounting document using report. User will enter billing document no and I have to find out respective accounting document and I have to change header data..
I am very new to these modules so please give me solution.
Thanks
Sameer

Hi,
Get a record from BKPF where
AWTYP = 'VBRK' & AWKEY = VBRK-VBELN .Once you get the accounting header document you can always fetch item level records from BSEG where bukrs =bkpf-bukrs
BELNR = BKPF-BELNR & GJAHR = BKPF-GJAHR.
I hope this helps,
Regards
Raju chiatle

Number range for billing document..its urgent!!

Hi Friends!!
can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
Amit...

Hi,
Look at object RV_BELEG in t.code snro. It is the number range object for SD Documents. Click on Number Ranges and then Intervals to view the different number ranges and associated intervals.
Now look at t.code 0vlk, which is Define Delivery Type. If you double-click on a delivery type BV it goes to more detail. See the field: "NR int. assgt.". This is the number range for delivery type BV.
This number range will be used in any company code or tax departure country that this delivery type is used in.
Regards,
Shamma

Cost Estimate error is coming at the time of billing document release

Dear All,
Hi, I am facing one problem that is whenever i am releasing the billing document system gives the error message.
Error : No standard cost estimate found for this material 164001001.
Here problem is some finished products we have a cost run and other finished materials we don't have a cost run. Other finished materials billing document release time we are facing the above error. There is no costing run for other finished materials. Here we have a CO-PA.
I have mainatined the costing key settings(ke40) in co-pa. In Ke40 t.code i have maintained the below settings.
1. I have selected transfer standard cost estimate radio button under determine material cost estimate.
2. Costing variant is 1010( This is our varaint)
3.Costing version is 01
4. Period indicator : Current standard cost estimate account to entry in material master.
I have maintained the above settings in ke40 t.code. Please suggest if any thing is wrong on above settings.
And also i have maintained costing key to material type assignments in ke4j t.code.
Here i maintained the three point of valuation (PV), One is real valuation, second is manual planning, third is automatic planning.
here i have assigned material type (fert) to costing key in costing key1 filed.
Please suggest if any thing wrong in the above settings. Still i am facing the same error at the time of billing document releasing time. Anybody please help to me. It is a very urgent to me.
Thanks & Regards,
Reddy

Hi,
This is a common error when COPA is activated and when the Costing Key is assigned according to the Material type in KE4J.
When you need Cost estimation for few FGs and dont require for other FG, then you list out the materials for which you require SCE and then assign these list of materials to the costing key in KE4H(Costing key for Products) leaving out those which dont require.
But detail the requirement further to facilitate the solution.
Thanks & Regards,
Ravi Kumar

Credit Memo request with reference to Billing Document number via IDoc

Hi,
I want to create credit memo request with reference to billing document number via IDocs.
I have tried through ORDERS05, but when I process I saw that it is only processing with reference to contract number or quotation.
So is any other way of creating credit memo request creation with reference to Billing document number via IDocs?
Thank you in advance.
Regards,
Santhi

Please Help... it is Urgent... Thank you

Field FKSTA- Billing status of delivery-related billing documents not getting updated

Hi Experts,
I have a requirement wherein I need to fetch the FKSTA - Billing status of delivery-related billing documents into the datasource 2lis_11_VASTI. I have checked a lot of threads on this topic but have not found a concrete solution yet.
I have checked the settings in vov7 and vov8 and everything seems to be in place. I have also checked in table VBUP, when I filter based on field FKSTA = 'C', it shows me the outbound delivery document nos. But when I use the related sales document, it shows me blank values. VBUK as well doesn't show any values for field FKSTK.
I would like to know how and where I can identify the 'billing status of delivery- related' document.
I can see in VBUP table that if I enter the sales document no. related to the delivery document, it does not show the correct status. I believe that the statuses should ideally get updated to the underlying VBUK and VBUP tables. Is there any way to update and align them?
Is there a workaround, a similar field that i can use for datasource enhancement that will give me the correct values?
Appreciate any help I can get on this as it is urgent.
Thanks,
AM

Hi,
You are correct that stauts is updated in table VBUK and VBUP.
However, a sales order does not determine a billing status for delivery related billing, field
VBUP-FKSTA is only determined for delivey.
So, it is correct behavior that VBUP-FKSTA = BLANK when searching VBUP with
VBUP-VBELN = sales order number.
Just because of above reason, you will not find billing status field in VA03 -> goto header/item;
you could only find billing status field for delivery in VL03N -> status overview.
It seems that you are trying to find out sales orders that have been fully deliveried and fully billed, am I right? As far as I know, there is no directly table/field/tcode that could meet your requirement.
You could consider following workaround:
firstly, get a list of deliveries that have been fully billied(search VBUP with VBUP-FKSTA = C or search VBUK with VBUK-FKSTK = C);
Secondly, using these deliveries to search table VBFA to find out related sales orders.
Hope this helps.
Best regards,
Crystal

Billing document created at the time of delivery

Hi,
Is a Billing document created and posted to the system at the time the Delivery document is created and posted to the system? When does the Billing document is created and posted?
Thanks

Hi,
Billing is not automatically created as soon as delivery is created & posted.
It has to be either manually created or set up in the background.
The background job is generally setup to happen in the last working hours or they are set up so that they can be sent through mail or fax to the customer.
The frequency of the background jobs depends on the requirement of the client, if they have an urgent requirement which cannot wait till the background job the user can manually create the bill from T-Coe VF01.

'update was terminated' while creating billing document VF01

Hi all,
i need a solution urgently ..except for paticular document no all documents that i post using VF01 create successfully document no.
but for a paticular document no(may be it is of some type that i am unable to) while creaing billing document no it gives a message 'document created successfully' ,but when i try to click any button after that e.g BACK it shows a messge 'Update was terminated for author ....' in my inbox. and vf03 shows the documentdoesn't exist.
in st22 i checked one dump . when i gave a break point at that point the cursor never reached the code.
I also checked SM13 and it showed all fms as init. and one fm 'RV_MESSAGE_UPDATE ' as error . i aws unable find the fm in the main program .
one more thing when i create bill document for other document type it shows messge 'Document saved ....(no accounting document created)' but for this one i am getting messge 'document saved.......' .
I asked one collegue he told me might be some OSS notes required for it . i am working on a unicoded system ECC 6.0 version.but he is not sure .
Has any body faced the same problem..and what was the soln....if oss notes are required than how could i find it..and what was the no...........
THANKS IN ADVANCE ...................

THANKS for the reply.
i am new to sap .can u tell me in detail where actually i can check for number range of the document . one more when i checked the sm13 and started debugging it gave me for a certain character set (may be in chineses) present in the table ,the transfer command gives a dump. now the problem is it is too long 132 and don't no forwhich character it gives an dump.how can i check the characters maintained in the system. it gives a dump CX_SY_CONVERSION_CODEPAGE ,At the conversion of a text from codepage '4102' to codepage '4110':
i am not sure this causes the mesages 'Updation was terminated' . what u people think.
thanks ..

FF 805 DURING TRANSFER SD BILLING DOCUMENT TO ACCOUNTING

Hi,
in order to create an entry in Advance Return for Tax on
Sales/Purchasesreport (TC S_ALR_87012357) mandatory for Italian tax rules
we need that
the transaction VF01/VF02 is able to post an Accounting document where
the tax code of the offset account "Discount for goods for free" has
blank value and not the same of Revenues account.
If we try to make a substitution step (TC GGB1) related to Financial
accounting line items for the discount account, after the billing
creation in VF01 the sys save the billing document with no accounting
document and if we try to release it to accounting through by TC VF02 the
system display message error FF805: "Tax statement item missing for
taxcode YD
Message no. FF805"
Diagnosis
No tax item exists for tax code YD in a G/L account item. A possible
cause is an incorrect transfer of parameters by the application to the
Accounting interface.
Procedure
Enter an OSS message.
Please take into consideration that SD Order line item that generate
thebilling document has "TANN" as sales document item category and "R100"
condition type (100% discount). Condition type MWST is that related to
Output tax and it has been setted in TC FTXP as indicated below:
YD: XXXX
Round.Up Output Tax
Transaction Key: MWS
Tax Rate: 0,00
Step number: 110
From Ref. Step for Percentage Conditions: 100
Condition Type: MWAI
and in TC VK12 as indicated below:
Condition type:MWST
Key combination: domestic tax
Country: IT
Tax classification 1 for customer: 1
Tax classification material:6
Amount: blank
Valid from: 01.01.2012
Valid to: 31.12.999
Sales Tax Code:YD
We are in deep trouble with this missing entry in the Advance Return
forTax on Sales/Purchases report and a solution is pretty urgent.
At the moment we are required to fulfill the missing using TC FB01 in
order to post the line the Tax Report needs but it take us a lot of
timeand it is not linked to SD subcomponent.
Please give this message an hight priority
Thanks in advance
Giovanna

Check OSS 1469906 - FF805 Tax Statement Item missing for Tax Code and other note Note 971253 - Causes for error message FF805 in SD given in it.
Regards,

Billing Document not getting release to Accounting. (VF01 and VF04).

Dear All,
I am facing an Urgent Issue. The User is Generating Invoices using VF01 and VF04. The Invoices is getting generated but not getting released to Accounting. When the User goes in VF02 or in VFX3 and then releasing the Billing Document. The Account Detemination is correctly maintained and G/L is also getting determined.
Please could you advice what may the Issue. Your Urgent Help is appreciated.
Thanks.
Farhan.

Dear Alan,
Yes I got the error message by pressing SHIFT + F4. Invoice Generated but no Accounting Document Getting Generated. A Balance has occured in Transaction Currency AED with the following details.
Technical data
     Tech. data details
      Client
      Group Number
      Sales Document Number                  0004803850
      Item Number of the SD Document         000000
      Schedule Line Number                   0050
      Counter in Control Tables              00
      Message Identification                 VF
      System Message Number                  050
      Output Type                            W
      Message Variable 01                    0004803850
      Message Variable 02
      Message Variable 03
      Message Variable 04
Detail
Diagnosis
     A balance has occurred in transaction currency 'AED' with
     the following details:
     Exchange rate '00', amount '         8,600.00-' and
     currency key 'AED'.
     The data in the transaction currency were transferred from
     the calling application.
System response
     Your data cannot be processed in FI.
Procedure
     The error is probably in the calling application.
nical data
Tech. data details
Client
Group Number
Sales Document Number                  0004803850
Item Number of the SD Document         000000
Schedule Line Number                   0702
Counter in Control Tables              00
Message Identification                 F5
System Message Number                  702
Output Type                            E
Message Variable 01                    00
Message Variable 02                             8,600.00-
Message Variable 03                    AED
Message Variable 04
Group Type
      Group Type
Same error I am getting when I am releasing the Billing Document to Accounting in VFX3.
But When I generate the Invoice using VF01 its getting released to Accounting.
Please advice why the Issue is only coming in VF04 Collective Invoice and in VFX3.
Your Urgent Help is appreciated.
Thanks,
Farhan.

Billing documents: (Urgent! )

Similar Messages

Maybe you are looking for