Blank Screen in Message Window of Solution Manager SPS 13

Hi Gurus,
We have SolMan SPS 13 and we have very strang Issue at the ABAP side : The Message Windows ( Most of them ) appears as just plain white Blank Screen i.e. there's a header in the message window but, no msg text as the entire window is pure white i.e. Totally Blank. So, the User ( in Client 000 ) can't read the Messages at all and can not decide which button to click in the Window ?
I checked on the SMP and have no mention of this weird issue - This seems Graphics Related Problem in Client 000.
Even the Solution_Manager and DSWP TCode also has entire screen as Blank ..can't use these TCode and Practically
SolMan is Useless.
Also, Can we configure the SolMan for Local SLD in Production ( non 000) client ? Or 000 Client is MUST for this ?
Was / Is anybody in the Same boat ? Any Suggestions To solve this ?
Sincerely appreciate any / all input on these 2 Issues.
Thanks,
Best Regards,
- Ishan

No Problem ..!
About the SPRO Config > The issue is two fold :
#1 Client has done Config of SolMan / Satellite Sysetms but have no documentation of who did what ( and based on
which SAP Guide / Resources !!)
#2 Even the SPRO Screen has white out - Blank - screen when I go for Config for SolMan
( under the Window 'Preparation for the Configuration of SAP Solution Manager ) , I see again only white screen.
So, I believe unless and untill we run the SGEN ( once we have space for it !!! ) , then I can have this Blank Screen Err Solved and I can move on from there to Profile Parameter Check as well !!
Thanks a Lot Again..
Best Regards,
- IShan

Similar Messages

MacBook pro will not boot up. Blank screen with message File is possibly corrupted. Checksum does not match etc

MacBook Pro suddenly will not boot up. Blank screen with message File is possibly corrupt. Header checksum does not match, etc

Hi s.cheslik,
It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Archiving/Deleting Test Messages in SAP Solution manager

Hi,
We have configured Service Desk in our solution manager 7.0 with EHP1 system.
We have created test messages to test the configuration.
We need to delete these test messages which are appearing in T Code CRM_DNO_MONITOR.
We run the report "CRM_ORDER_DELETE" but the output is
Deletion of CRM Documents
The following document could not be deleted:                 8000000259
Not possible to delete, a reference exists to a subsequent document
Number of documents deleted:                                          0
Number of documents not deleted:                                      1
So
We have followed the "Note 1329247 - Archiving Solution Manager Service Desk messages".
1)
a)Call transaction DNOTIFWL and set the deletion flag for the Service Desk message. The deletion flag corresponds to the system status I1076 (deletion flag).
b) Execute the report Z_DELETE_BASIC_NOTIFICATIONS
The above step we have executed successfully.
2)
In CRM
You cannot delete a service process in CRM. The service process must be archived.
Call transaction SARA and select the archiving object CRM_SERORD. Archiving involves three steps:
a) Initial run     Report CRM_ARC_SERORD_CHECK
b) Write run       Report CRM_ARC_SERORD_SAVE
c) Delete run     Report CRM_ARC_SERORD_DELETE
in SARA T Code we have typed archiving object CRM_SERORD.
After this what to do??? How to proceed further.
Can any body suggest us the step by step procedure to archive these test messages.
Regards,
Raj

> In CRM
> You cannot delete a service process in CRM. The service process must be archived.
> Call transaction SARA and select the archiving object CRM_SERORD. Archiving involves three steps:
> a) Initial run     Report CRM_ARC_SERORD_CHECK
> b) Write run       Report CRM_ARC_SERORD_SAVE
> c) Delete run     Report CRM_ARC_SERORD_DELETE
>
> in SARA T Code we have typed archiving object CRM_SERORD.
> After this what to do??? How to proceed further.
You need to schedule a BGD job to execute this. You can do this from the SARA screen itself, clicking on the 'Job' button. Please refer:
http://help.sap.com/saphelp_crm50/helpdata/en/e6/c66f3b6c980c3be10000000a11402f/content.htm
Rajeev

Blank screen when installing Windows 7 on my Late 2009 iMac

So before I drop everything and start hitting my head agains the wall I figured I would make one more stop and ask folks on the forum.
I'm trying to install Windows 7 Pro on my "late 2009" 27" iMac. Here is a quick config.
Here are the exact steps I take:
1. Start Boot Camp Assistant
2. Select both options to download Windows components and install Windows 7... and make the partion (80GB) allocation to Windows partition
3. Insert the Windows installation disc (Pro, full version)
Everything seems to be running smooth, meaning I see the windows installer and I'm able to select the partition where I want Windows to reside and here are the last few things I see...
Right after the Starting Windows the screen goes blank and that's is. If I simply restart at this point it goes back to the Starting Windows and blank screen again (no option to choose OS).
Since the wireless keyboard is not functioning at this point I learned to take out the CD from the drive by holding the mouse button on startup. From there I insert an installation disc for Snow Leopard and boot from disc by holding the "C" button on my USB keyboard. It lunches the Utilities where I'm able to select The Start Up Disk and here is where I actually see both partitions. That's how I got back to OS.
So what am I doing wrong? I though that it had to do something with the video driver but if the installer works than I should be able to go in there after it's in place and run the correct driver from the WindowsSupport folder that I downloaded earlier. I have tried this with 32-bit and 64-bit version of Windows 7 pro with the same negative result.
Any help would be greatly appreciated. I called the App store to see if they can assist but the only thing they suggested was CrossOver which doesn't help me.
Does anyone have any ideas on what to do/change?
Thank you.
Best regards,
Marcin

Got it!
After posting my question I noticed the "More like this" category and the second discussion was a hit.
https://discussions.apple.com/message/11290644#11290644
It was a display driver. All I needed to do was to boot from the CD again and following the directions in the post.
Worked like a charm.

PC fails to reboot and shows blank screen after automatic windows updates including SP

Pavilion- a1130n" WINXP ProfessionalC fails to reboot and shows blank screen after automatic install ing windows updates including SP 3

I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless.

Support Desk Message Creation in SOLUTION MANAGER through External Emails

Hello Experts,
                    I am a ABAP Developer , as mentioned in subject, my part is to Create support desk message in solution manager,through external Emails like outlook Express . To do this task i am in need of more information about some componenets which are used in solution manager support desk Message.
      My Doubts are,
1) What is the use of Ibasecomponent in Message Creation?
2) What if the ibasecomponent is mentioned as a defaut value ' 24 ' ( i.e is the ibasecomponent for solution manager - support desk ) ?
3) To track the system from which the message is created , is ibase required or the SAP component will give those information?
     If anyone has already worked with this subject, please give me some suggestions ASAP.
Thanks in Advance,
Mohana

Hello Mohana,
Let see if I can explain this well:
1) What is the use of Ibasecomponent in Message Creation?
When you define a Solution in the SOLMAN, you need to update your Ibase
Edit->Initial Data transfer for Ibase
This create a tree structure in the ibase IB52, as you can see in the attachment.
You get a componet number for SID-Client
You can configure the SOLMAN in a way that when a message arrives from
<System ID> <Installation Number> <Client> <User Name>
this is what solman knows from a message comming from a satellite, them you
know directly from which component/ibase the message has been received.
This is important data, the component/ibase, for reporting issue, for assigning this component to a sold-to-party (being in IB52, left tree, select a system and go to Goto->Partner you can assign a Sold-to party BP there for example)
2) What if the ibasecomponent is mentioned as a defaut value ' 24 '
By default the SOLMAN system has a Intalled base 01 already created for being used and maintained "automatically":
being in dswp, solution : Edit->Initial Data transfer for Ibase
If not you msut maintain the ibase manually from IB52, this is also possible.
The Ibase 01 is a prconfigured iBase for being used for the SOLMAN application.
Tink that the SOLMAN system is built up a CRM system, so the IBase is CRM matter. SOLMAN is only using some CRM applications to build the Service Desk scenario for example.
I3) To track the system from which the message is created , is ibase required or the SAP component will give those information?
Ibase is required
Hope this helps,
Dolores

Error message in "Check Solution Manager"

I'm running SolMan EHP1 SP6. The BI repository and Solution Manager are running on the same box. The BI repository is loaded in client 001. The System SID is PS4.
I'm performing the "Diagnostic Self Check" in Root Cause Analysis. When I select the "Check Solution Manager" button I'm getting an error message
Text = BI Setup check 'MYSELF_DEST' failed - Reason: ;Incorrect client 300; use BI client 001
Action = The CCMSBISETUP job was not completed successfully. Please run CCMSBISETUP again from the transaction solman_admin and/or adjust the corresponding BI objects in RSA1 if necessary.
In RSA1 the source system is defined as PS4CLNT001. So I'm not sure what the problem is.
It is my understanding that I can configure CCMSBISETUP in solman_workcenter by selecting "System Monitoring", then Setup, then Configure IT Performance Reporting. When I do this the default value for RFC destination from Solution Manager to BI: is set to NONE
The system requires and entry for the RFC destination from BI to Solution Manager - Does anybody know what RFC destination belongs here?

Hi,
The CCMSBISETUP job was not completed successfully. Please run
CCMSBISETUP again from the transaction solman_admin and/or adjust the
corresponding BI objects in RSA1 if necessary.
Alternatively, please perform again Initial and Basic configuration
for SolMan by running transaction solman_setup. This should solve the
issue.
Notice that you must have the latest version (13) of SAP Note 1405878
applied in the solution manager system.
Hope this helps.
Cheers
SH

IPhoto blank screen error message

iPhoto opens with blank screen and error message "Your iPhoto Library is in use by another application or has become unreadable". Not in use by another application. Tried repairing, doesn't work. Reopened while holding down Option and Command, didn't work. Any suggestions?

Start with the troubleshooting basics:
1. Repair Permissions using Disk Utility
2. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

Doubt on viewing service message reply from solution manager???

Hi,
How to view the reply(for Service Message) from solution manager in our satillite system? or how to view the reply for our service message? Please share your ideas..

Hello Sriram,
Unfortunately it is not possible to display the replies of the support
desk in any satellite system. There are to ways to inform the creator
the message:
A new action can be defined, so that a mail is sent to the creator, when
e.g. the status of the message changes. You can read in attached note
no. 691303 how to set up an action triggered by status change.
The second possibility is to set up a user in the Solution Manager
system with display authorization, then creator of the message must log
on to the Solution Manager system and can then have his messages
displayed.
At the moment there are no other possibilities for the issue described
by you.
Hope this helps,
Dolores

Forward message between CUSTOMER Solution Manager to VAR Solution Manager

Hello,
we have configured our solution manager for VAR enviroment.
Now we need to connect the customer solution manager to our VAR solution manager to forward the message opened at customer site.
In Solution Manager VAR documentation I found 2 documents (How To: Setup Service Desk 2 Service Desk (Demo) https://websmp207.sap-ag.de/sapidb/011000358700000129912009E.ZIP and How To: Einrichtung Service Desk zu Service Desk Verbindung https://websmp207.sap-ag.de/sapidb/011000358700000025722009D.PDF) but they are not very clear.
Did anyone setup this configuration?
Thanks
Andrea

>
Solution Manager wrote:
> In Solution Manager VAR documentation I found 2 documents
> (How To: Setup Service Desk 2 Service Desk (Demo) https://websmp207.sap-ag.de/~sapidb/011000358700000129912009E.ZIP and
> How To: Einrichtung Service Desk zu Service Desk Verbindung https://websmp207.sap-ag.de/~sapidb/011000358700000025722009D.PDF) but they are not very clear.
Hi Andrea,
- What's not clear?
- What information is missing in the documents?
Just post your questions here in the forum.
(I have not yet configured it on my own.)
Best regards,
Ruediger

Blank Screen / Custom message?

Hello,
Is there any way to do a customized message instead blank screen during remote control session? thank you.

Jakub,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Blank screen in Messages?

The Messages icon shows a message received, but when Messages is opened there is nothing but a blank screen - both existing messages and new have disappeared

See:
iOS: Troubleshooting Messages
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Successor of SAP Solution Manager SPS 20

Hi!
Has some one of you information about the successor of SAP Solution Manager after SPS 20?
If yes, when the next SPS will be delivered and what will be the new function?
Thank you!

>
Holger Thomasson wrote:
> Has some one of you information about the successor of SAP Solution Manager after SPS 20?
>
> If yes, when the next SPS will be delivered and what will be the new function?
Hi Holger,
The successor is SPS21, which is expected to be released for customers in calendar week 44/2009 (end of October 2009).
[SAP Support Package Stack Schedule|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000722640&_SCENARIO=01100035870000000202&]
There does not yet exist any (public) information what improvements are contained in SPS21.
In general, you should expect mainly bug fixes.
Best regards,
Ruediger

Blank screen when installing Windows 7 with Boot Camp - Mac Mini 2011

I'm new to the Mac scene, having barely any knowledge on the OS.
I've been trying to install Windows 7 via Boot Camp on my new Mac Mini (Latest offering from Apple).
I have an External DVD Drive which I have been using, connected via two USB's to the back of the Mac Mini itself. It's fully functioning, with the Mac recognizing the Drive. I've used it for some CD's and DVD's so far.
I have a full, licensed copy of Windows 7 Home Premium, bought from the Microsoft Store on a DVD. There's both a 64bit and 32bit DVD, of which I have tried both to install Windows 7.
I've been through the Boot Camp Assistant software, un ticking both the "Create a Windows 7 install disk" and "Download the latest Windows support software from Apple" because I already have the Windows 7 install disk. I've had troubles downloading the Windows support software from Apple, as it just stops about 1/4 of the download for no apparent reason.
So once I've made the partition, I insert the Windows 7 DVD into the External Disk Drive, and it reboots. At first it looks like the Disk Drive is working, as you can hear the Disk movement and a blue light on the front of the Disk Drive... But then the screen goes blank, and the Disk stops spinning (from what I can tell). Nothing else happens from then on.
Is there any reason as to why this is happening?
Thanks, Dominic

Yes. Booting from a USB-DVD to install Windows
The MacBook Air has extra drivers. Some people have edited the script preference plist to add their model Not all USB DVD devices may or may not work.
Burning electronic versions like an ISO or in .exe format you will see threads where that is the issue.

Deletion of messages created in solution manager service desk

Hi All,
I have implemented service desk functionality on solman 4.0. and for the testing we have created a number of messages from the satelite system. now i want to delete the messages from the list in crm_dno_monitor list.
could someone help me as to how do i delete all the test messages created in the service desk.
Regards
Mahendra K

Hi Ben,
Thanks a lot for ur reply, but i have a few queries which have not been answered in the attached post.
after we confirm the message deletion from the table DNOD_NOTIF. but again when we go ot the message list and observe we still find the messages there.
also how do we delete messages with status of 'External Processing' and the list only shows the messages which are outstanding the date.
could you help me in resolving the same.
Regards
Mahendra K

Blank Screen in Message Window of Solution Manager SPS 13

Similar Messages

Maybe you are looking for