BT Exchange upgrade - Homehub still shows as ADSL1...

Hi,
I've had an email last week saying my line would be upgraded today as the exchange has been upgraded. My router was reset earlier but my home hub stats still appear to be showing plain old ADSL. I was under the impression the modulation should show ITU-T G.992.5 and my upstream speeds would improve slightly, but everything seems the same as before. Do I need to do anything at my end for the changes to take place? The hub is a recently fitted 2.0A to replace a faulty 2.0B hub if that is of any help.
Regards
Mike
ADSL line status
Line state
Connected
Connection time
0 days, 0:29:59
Downstream
5,056 Kbps
Upstream
448 Kbps
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
5.9 dB / 20.0 dB
Line attenuation (Down/Up)
48.0 dB / 28.5 dB
Output power (Down/Up)
19.8 dBm / 12.6 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
2453 / 0
CRC Errors (Down/Up)
36 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
11
Solved!
Go to Solution.

Hi, I did try a search but it seams that others with a similar issue resorted to contacting the mods to resolve this after being told various things. I'm trying to be patient, but after receiving another email this morning from bt... 
 Hello,
 Good news
 This is to let you know that we've now upgraded your line and you should now have an improved, more consistent broadband connection, and maybe a speed increase.
 You can find out more at bt.com/networkupgrade
Which is great news but the router still shows ADSL Max even after a reset so I'm still not showing any benefits of the exchange upgrade. Has anyone else had this letter and what were your experiences in the upgrade process. There is a lot of confusion over this but I can't find anything definitive. Do I need to contact a mod or is the initial process for after the upgrade for the modem to have a number of successful days connection before it changes? I'm sure someone out there knows.
Thanks
Mike

Similar Messages

  • I am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

    i am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

    I had a similar problem.  Here is how I resolved the issue.
    1.  Remove Network Connect
    2. Run Terminal and remove /usr/local/juniper and everything within the juniper directory.
    3. Reboot the machine and reinstall Network Connect
    4. Test if you can now connect.
    During removal, you may encounter permission denied error, you will need to change the permission to 777.  For example "sudo chmod 777 nc".

  • Exchange Upgrade but still no ADSL2+

    Hi All,
    I have had the your line has been upgraded email ect... so i have been trying to get it to connect at ADSL2+ modulation but no luck so far! I have been on the phone to BT help for ages to which they are sure ADSL2+ is enabled on my line.
    I am still in the 10 day period but it has not once tried to coneect at ADSL2+!
    Have i got no chance because of line stats or do i need to get hold of the right person at bt to get ADSL2+ sorted.
    I have a billion 7800n router so it can do adsl2, adsl2+, g.dmt modulation etc... Best i can get is 2350kbps down and 412kbps up.
    Any advice would be greatly received.
    Cheers
    Dean
    ADSL Status
    Parameters
    DSP Firmware Version A2pB025f.d22k
    DMT Status No Defect
    Operational Mode G.DMT
    Upstream 448
    Downstream 2944
    SNR Margin(Upstream) 13.0
    SNR Margin(Downstream) 3.0
    Line Attenuation(Upstream) 31.5
    Line Attenuation(Downstream) 63.0
    Exchange name: Measham
    Exchange code: EMMESHM
    Location: Leicestershire East Midlands
    Postcode: DE127EG
    Maps: Our map | Multimap | Streetmap
    Serves (approx): 4,104 residential premises
    189 non-residential premises.
    Broadband availability overview
    ADSL: Yes
    SDSL: No
    LLU services: Yes
    Cable: No
    Wireless: No
    BT Wholesale information
    ADSL status: Enabled as of 26/11/2003
    ADSL Max status: Enabled as of 31/03/2006
    SDSL status: Not available
    21CN WBC status: Enabled
    FTTC status: Not available

    after getting the email about the upgrade it can be immediate/days/week/months before you are actually upgraded.  you can try the uk sales 08007830056 to try and get it quicker but that will probably need you to agree a new contract.  you can also try the mods http://bt.custhelp.com/app/contact_email/c/4951
    with your attenuation and +2db after 21CN upgrade I will doubt if you get any speed increase but the new 21CN bring a more aggressive system on noise so what was a good line on adslmax is not necessarily a good line on 21CN.
    you can check potential speed here remembering to add 2db to your existing 63db for 21CN adsl2
    http://www.kitz.co.uk/adsl/max_speed_calc.php
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Exchange Upgraded But Still No Change

    Hi,
    As far as I can tell my exchange was upgraded to ADSL2+ back in 2010 yet I still appear to be on a upto 8mbps service.
    I was able to accurately check my line length a while back and it's less than 800m. So it's a bit frustrating to be getting slower than achievable speeds.
    Is there any chance this can be rectified?

    Thanks for the quick response.
    I'm not sure this can be fixed without the help of anyone at BT as my QOS/Line Profile will need to be amended.
    Will post line stats when I get home. 
    Connected to NTE5 via x1 filter - this is the only socket in the property
    No extension leads or Sky/Alarms etc
    Clean dial tone
    I have BT Vision
    I have recently changed the HH for a netgear as the HH was intermittantly switching off. (which is there may be historic instability).
    I don't have a problem with throughput (although it is lower proabably thanks to Vision). It's the Sync rate I have a problem with. I'm about 800m from the Exchange and synched at 8mbps.
    I haven't recieved an email from BT about my exchange, I'm going off Sam Knows
    ADSL status:Enabled as of 30/06/2001
    ADSL Max status:Enabled as of 31/03/2006
    SDSL status:Enabled as of 10/07/2005
    21CN WBC status:Enabled
    FTTC status:2013
    Thanks Again.

  • Exchange upgraded and still waiting for faster spe...

    I've had around 7mbps from the Brixworth exchange for years. The exchange was upgraded a few months ago. My next door neighbour is with PlusNet and gets around 13mbps; he received a letter from PlusNet straight after the exchange was upgraded and got the higher speed then.
    If I apply as a new customer on the BT website it says I will get 13mbps as "BT will always give customers the fastest possible speed". I've tried BT online chat and calling BT support. I get told different incorrect things each time.
    Does anyone know when I should expect to get upgraded to get the higher speed now available on the Brixworth exchange?
    Thanks.
    Solved!
    Go to Solution.

    Thanks to you both for taking the time to reply.
    I've spent another hour on the phone to BT, being bounced between sales ("it's a technical issue") and technical ("its a sales issue"). Nobody understands the issue including: "it's only 6mbps - it's not that much different" and "we only gaurantee 1mbps". Nobody understands that it just needs an engineer to visit the exchange and upgrade me the same as PlusNet did months ago with my next door neighbour.
    I give up. I'll wait until by contract expires in October and then transfer both landlines in the house to a provider who actually cares about its customers.
    Thanks again for taking time to read and respond.

  • I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

    I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
    the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

    Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

  • I can not delete my history and adding new bookmarks. Upgrading to later Firefox versions and/or re-installing didn't help. The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.

    I can not delete my history and adding new bookmarks.
    Upgrading to later Firefox versions and/or re-installing didn't rectify it either.
    The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.
    Also, I have noticed that every once in awhile you can not close tabs you've opened, either by pushing on the X button and/or clicking on the mouse to close it. Although closing the window and opening it again (without closing the Firefox application) seemed to rectify the problem in the short term, it's becoming quite annoying.
    == This happened ==
    Every time Firefox opened
    == the Firefox is being used

    I think I have a solution.
    First, download the add-on SQManager. This should be included with FireFox, it is really good.
    Look for the file '''moz_hosts''' in the folder '''places.sqlite'''.
    Don't delete the file, just delete the information in the file. My file has over 3600 websites, which go back years!! I did not know they were there, but I was frustrated about not being able to get rid of them. They popped up every time I used the address bar. Clearing my history would not get rid of them.
    This is where they are stored!! I found that by deleting the pesky web site from '''moz_hosts''', it does not appear in my address bar anymore!!!
    I think that if I just delete all the websites in moz_hosts....
    Wa-la...History Gone!!!
    As long as you don't delete the file, just empty it, FireFox won't know the difference. It will just keep adding websites to it until you empty it again.
    Why running "clear recent history" doesn't do this, I don't know. You are doing manually what "clear recent history" is not doing.
    Please tell me if you see any flaw in this.
    ''I think it's the solution we've all been looking for!''

  • IPhoto still showing after upgrading to photos

    Hi,
    i've upgraded to Photos (Yosemite 10.10.3), however iPhotos is still showing as well as Photos. Is there anyway I can remove this? I've tried to via the 'App Cleaner' program, however iPhoto is shown as locked? It just seems stupid to have it taking up room on my drive when its obsolete!

    iPhoto still works and will not interfere with the new Photos.  If you have the space, I would hold on to it for a while till you are completely satisfied with Photos. There are many "issues" that  have been reported.
    If you really want to delete it, go to your Applications folder and select the app.
    Go to it's 'info' panel by clicking  Cmd-i
    When the panel opens, click on the lock in the bottom right hand corner; this will ask for your computer password to unlock the panel.
    Click on the plus sign. This will open another window that will allow you to add yourself to the "Name" list in the info panel.
    Select your name.
    Go to the info panel and set your "Privilege" to Read & Write
    Click on the Lock.
    You should now be able to Cmd-Delete the file.

  • Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go.

    Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?

    I have an iP4500, which I assume is quite similar to your model.
    I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
    Plug the printer into the USB port on the Express and restart the printer.
    Open System Preferences (gear icon on the dock) and then open Print and Fax
    Right-Click in the printer area on the left and select Reset Printing System
    Then click the + (plus) button at the bottom of the printer list to install the printer again.

  • My iPad was disconnected during upgrade. I've tried restoring and resetting.  I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer.

    My iPad was disconnected during upgrade. I've tried restoring and resetting.  I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?

    Unable to update or restore
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • Did Talk21 upgrade to Premium, but still shows as ...

    Followed the upgrade process to Premium mail to save my Talk21 account from being lost. Placed an order and received confirmation mail that my order was "done" and I could now login to Premium mail. When I login to my email account at BT.com, it is still showing as Basic Mail. I cannot activate my new BT ID as I do not have a customer account number - there was a link to request this by post, so have done that. I do already have a BT account against my landline, but reading posts elsewhere here, it does not appear possible to link the account for mail to the landline account.
    So, how to proceed? I just want to ensure my Talk21 email account is now "protected"....
    Thanks.

    The BT is in shambles and nobody knows what is going on.  The termination of the email system and upgrading of non-broadband email accounts have taken everybody by surprise and now they are trying to find a way out.
    I know people whose account has been upgraded when they didn't even ask for it!  Now how do you explain this?  I won't name names because they don't want their account to be terminated on 16th September.  When I heard this, the first thing I asked them is to check their credit card just in case there is a phantom charge.  They tell me they are pretty sure they haven't given their credit account details to BT.  In the 1990s, BT were using credit card payments system but they are quite sure that credit card account is closed now.
    Sorry I can't help you because I don't know the answer myself.  Only the MODs can help you on this.
    Good luck.

  • Installed Sharepoint 2010 Server SP2 Update; PSConfig succeeds but CA still shows "Upgrade Available"

    I have installed SharePoint 2010 Server SP2.  Central Administration shows the configuration database is at 14.0.7015.1000.  I had to run PSConfig several times before it completed successfully due to missing features, setup files, etc.  But
    I got those cleaned up and finally got PSConfig to complete.
    However, when I go to Farm Information it still shows "Upgrade Available" for the single WFE server we have. 
    When I run stsadm.exe -o localupgradestatus it shows me the following:
    [2] content database(s) encountered.
    [0] content database(s) still need upgrade or cannot be upgraded.
    [23] site collection(s) are contained in the content databases.
    [0] site collection(s) still need upgrade.
    [53] other objects encountered, [12] of them still need upgrade or cannot be upgraded.
    The 12 objects that cannot be upgraded are ancillary databases like:
    StateService_[GUID]
    Secure_Store_Service_DB_[GUID]
    PerformancePoint Service Application_[GUID]
    They all show "Cannot Upgrade" for the status.
    Am I correct in thinking these are what's keeping the status at Upgrade Available?  And if so how can I resolve?
    If not, what else can be done to change that Upgrade Available status?
    My goal is to get SP2 and the latest CU applied before trying to reinstall the User Profile Service.
    Thank you.

    use psconfig via command line:
    > PSCONFIG.EXE -cmd upgrade -inplace b2b -wait
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Problems upgrading camera raw 8.3 to 8.5, upgrade finished  but version 8.3 still shows in Bridge

    problems upgrading camera raw 8.3 to 8.5, upgrade finished  but version 8.3 still shows in Bridge

    Moving this discussion to the Adobe Camera RAW forum.

  • So I know now that upgrading to 5.0 took away the page icon at top of iPad. But strangely enough it still shows up on iPhone 4 after upgrading. Anyone know why

    So I know now that upgrading to 5.0 took away the page icon at top of iPad. But strangely enough it still shows up on iPhone 4 after upgrading. Anyone know why

    So how can I get it back to where there is a seperate visual thumbnail page of tabs. This new tabs on the top is a big mistake in my opinion. Many times while on a website I have accidentally hit one of the other tabs at the top of the screen and all the sudden I am on a page that was previously open. This new tabs at the top also made the menu bar deeper to accomodate everything that should be on a seperate page like it used to be. It was really great, and not something that had to be improved upon. So is there a way to get the tabs back to where they should be?

  • TS4208 Apple Mail client no longer marks my mail as read on all my iOS devices. If I read a email on my iPhone and later open Mail on my iPad, the iPad still shows the email as unread.This changed recently, perhaps after iOS7 upgrade. Did I miss a setting

    Apple Mail client no longer marks my mail as read on all my iOS devices. If I read a email on my iPhone and later open Mail on my iPad, the iPad still shows the email as unread.This changed recently, perhaps after iOS7 upgrade. Did I miss a setting? All mail account are IMA. iCloud is set to push, business mail is set to fetch every 15 minutes.

    Read thier own support document on the subject then
    http://support.apple.com/kb/TS1795
    This document was written as an answer to all those who complained about it as paying MobileMe users
    They ignored us then and when MobileMe became iCloud they ignored us again, and just carried on with a system that will not update the e-mail read status across all devices
    That's how it works,   and like you 1000's of loyal Apple users cant believe it either but there you go

Maybe you are looking for